Design de comunicação

Dissertação de Doutoramento para obtenção do grau de Doutor em Design, dissertação apresentada na Universidade de Lisboa - Faculdade de Arquitetura.

Design and synthesis of novel quinolones directed to the Plasmodium falciparum bc1 protein complex

Tese de Doutoramento, Química, Especialização em Química Orgânica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Design gráfico para televisão

Dissertação para obtenção do grau de Mestre em Design de Comunicação apresentada na Universidade de Lisboa - Faculdade de Arquitetura.

Design, Fabrication, and Mechanical Property Analysis of 3D Nanoarchitected Materials

Recent developments in micro- and nanoscale 3D fabrication techniques have enabled the creation of materials with a controllable nanoarchitecture that can have structural features spanning 5 orders of magnitude from tens of nanometers to millimeters. These fabrication methods in conjunction with nanomaterial processing techniques permit a nearly unbounded design space through which new combinations of nanomaterials and architecture can be realized. In the course of this work, we designed, fabricated, and mechanically analyzed a wide range of nanoarchitected materials in the form of nanolattices made from polymer, composite, and hollow ceramic beams. Using a combination of two-photon lithography and atomic layer deposition, we fabricated samples with periodic and hierarchical architectures spanning densities over 4 orders of magnitude from ρ=0.3-300kg/m³ and with features as small as 5nm. Uniaxial compression and cyclic loading tests performed on different nanolattice topologies revealed a range of novel mechanical properties: the constituent nanoceramics used here have size-enhanced strengths that approach the theoretical limit of materials strength; hollow aluminum oxide (Al₂O₃) nanolattices exhibited ductile-like deformation and recovered nearly completely after compression to 50% strain when their wall thicknesses were reduced below 20nm due to the activation of shell buckling; hierarchical nanolattices exhibited enhanced recoverability and a near linear scaling of strength and stiffness with relative density, with E∝ρ^1.04 and σy∝ρ^1.17 for hollow Al₂O₃ samples; periodic rigid and non-rigid nanolattice topologies were tested and showed a nearly uniform scaling of strength and stiffness with relative density, marking a significant deviation from traditional theories on “bending” and “stretching” dominated cellular solids; and the mechanical behavior across all topologies was highly tunable and was observed to strongly correlate with the slenderness λ and the wall thickness-to-radius ratio t/a of the beams. These results demonstrate the potential of nanoarchitected materials to create new highly tunable mechanical metamaterials with previously unattainable properties.

APPLICATION OF AN IMPUTATION METHOD FOR GEOSPATIAL INVENTORY OF FOREST STRUCTURAL ATTRIBUTES ACROSS MULTIPLE SPATIAL SCALES IN THE LAKE STATES, U.S.A.

Credible spatial information characterizing the structure and site quality of forests is critical to sustainable forest management and planning, especially given the increasing demands and threats to forest products and services. Forest managers and planners are required to evaluate forest conditions over a broad range of scales, contingent on operational or reporting requirements. Traditionally, forest inventory estimates are generated via a design-based approach that involves generalizing sample plot measurements to characterize an unknown population across a larger area of interest. However, field plot measurements are costly and as a consequence spatial coverage is limited. Remote sensing technologies have shown remarkable success in augmenting limited sample plot data to generate stand- and landscape-level spatial predictions of forest inventory attributes. Further enhancement of forest inventory approaches that couple field measurements with cutting edge remotely sensed and geospatial datasets are essential to sustainable forest management. We evaluated a novel Random Forest based k Nearest Neighbors (RF-kNN) imputation approach to couple remote sensing and geospatial data with field inventory collected by different sampling methods to generate forest inventory information across large spatial extents. The forest inventory data collected by the FIA program of US Forest Service was integrated with optical remote sensing and other geospatial datasets to produce biomass distribution maps for a part of the Lake States and species-specific site index maps for the entire Lake State. Targeting small-area application of the state-of-art remote sensing, LiDAR (light detection and ranging) data was integrated with the field data collected by an inexpensive method, called variable plot sampling, in the Ford Forest of Michigan Tech to derive standing volume map in a cost-effective way. The outputs of the RF-kNN imputation were compared with independent validation datasets and extant map products based on different sampling and modeling strategies. The RF-kNN modeling approach was found to be very effective, especially for large-area estimation, and produced results statistically equivalent to the field observations or the estimates derived from secondary data sources. The models are useful to resource managers for operational and strategic purposes.

Pressure Induced Structural Changes and Gas Diffusion Pathways in Monomeric Fluorescent Proteins

Fluorescent proteins (FPs) are extremely valuable biochemical markers which have found a wide range of applications in cellular and molecular biology research. The monomeric variants of red fluorescent proteins (RFPs), known as mFruits, have been especially valuable for in vivo applications in mammalian cell imaging. Fluorescent proteins consist of a chromophore caged in the beta-barrel protein scaffold. The photophysical properties of an FP is determined by its chromophore structure and its interactions with the protein barrel. Application of hydrostatic pressure on FPs results in the modification of the chromophore environment which allows a systematic study of the role of the protein-chromophore interactions on photophysical properties of FPs. Using Molecular Dynamics (MD) computer simulations, I investigated the pressure induced structural changes in the monomeric variants mCherry, mStrawberry, and Citrine. The results explain the molecular basis for experimentally observed pressure responses among FP variants. It is found that the barrel flexibility, hydrogen bonding interactions and chromophore planarity of the FPs can be correlated to their contrasting photophysical properties at vaious pressures. I also investigated the oxygen diffusion pathways in mOrange and mOrange2 which exhibit marked differences in oxygen sensitivities as well as photostability. Such computational identifications of structural changes and oxygen diffusion pathways are important in guiding mutagenesis efforts to design fluorescent proteins with improved photophysical properties.

Structural Health Monitoring Inside Concrete and Grout Using the Wireless Identification and Sensing Platform (WISP)

This research investigates the implementation of battery-less RFID sensing platforms inside lossy media, such as, concrete and grout. Both concrete and novel grouts can be used for nuclear plant decommissioning as part of the U.S. Department of Energy’s (DOE’s) cleanup projects. Our research examines the following: (1) material characterization, (2) analytical modeling of transmission and propagation losses inside lossy media, (3) maximum operational range of RFID wireless sensors embedded inside concrete and grout, and (4) best positioning of antennas for achieving longer communication range between RFID antennas and wireless sensors. Our research uses the battery-less Wireless Identification and Sensing Platform (WISP) which can be used to monitor temperature, and humidity inside complex materials. By using a commercial Agilent open-ended coaxial probe (HP8570B), the measurements of the dielectric permittivity of concrete and grout are performed. Subsequently, the measured complex permittivity is used to formulate analytical Debye models. Also, the transmission and propagation losses of a uniform plane wave inside grout are calculated. Our results show that wireless sensors will perform better in concrete than grout. In addition, the maximum axial and radial ranges for WISP are experimentally determined. Our work illustrates the feasibility of battery-less wireless sensors that are embedded inside concrete and grout. Also, our work provides information that can be used to optimize the power management, sampling rate, and antenna design of such sensors.

Design of products to honor people post mortem

The cemeterial units, are places of social practices of everyday life and worship and the tomb where nostalgia can be externalized and the memory of the deceased revered. In Western societies we can find a category of artifacts meant to evoke the memory or honor the dead. In this paper we we mention three examples of products that enabled a reflection on the concepts that gave rise to their ways, and that risks to fit them into a new "material culture", in that it may have created a break with the traditional system codes and standards shared by companies, and its manifestations in relation to the physical creation of this category of products. This work offers a reflection on the Design Products.What probably makes it special is the field where it is located: the design of products in one post mortem memory. Usually made of granite rock or marble, have the form of plate or tablet, open book or rolled sheet. On one side have a photograph of the person who intend to honor and inscriptions. The thought of inherent design of this work put on one side the intricate set of emotions that this type of product can generate, and other components more affordable, and concerning the form, function and object interactions with users and with use environments. In the definition of the problem it was regarded as mandatory requirements: differentiation, added value and durability as key objectives.The first two should be manifested in the various components / product attributes. The aesthetic and material/structural durability of product necessarily imply the introduction of qualifying terms and quantitative weights, which positively influence the generation and evaluation of concepts based on the set of 10 principles for the project that originated a matrix as a tool to aid designing products. The concrete definition of a target audience was equally important. At this stage, the collaboration of other experts in the fields of psychology and sociology as disciplines with particular ability to understand individuals and social phenomena respectively was crucial. It was concluded that a product design to honor someone post mortem, should abandon the more traditional habits and customs to focus on identifying new audiences. Although at present it can be considered a niche market, it is believed that in the future may grow as well as their interest in this type of products.

Engineering design of an integrated sustainable process system for cassava biobased materials

Cassava contributes significantly to biobased material development. Conventional approaches for its bio-derivative-production and application cause significant wastes, tailored material development challenges, with negative environmental impact and application limitations. Transforming cassava into sustainable value-added resources requires redesigning new approaches. Harnessing unexplored material source, and downstream process innovations can mitigate challenges. The ultimate goal proposed an integrated sustainable process system for cassava biomaterial development and potential application. An improved simultaneous release recovery cyanogenesis (SRRC) methodology, incorporating intact bitter cassava, was developed and standardized. Films were formulated, characterised, their mass transport behaviour, simulating real-distribution-chain conditions quantified, and optimised for desirable properties. Integrated process design system, for sustainable waste-elimination and biomaterial development, was developed. Films and bioderivatives for desired MAP, fast-delivery nutraceutical excipients and antifungal active coating applications were demonstrated. SRRC-processed intact bitter cassava produced significantly higher yield safe bio-derivatives than peeled, guaranteeing 16% waste-elimination. Process standardization transformed entire root into higher yield and clarified colour bio-derivatives and efficient material balance at optimal global desirability. Solvent mass through temperature-humidity-stressed films induced structural changes, and influenced water vapour and oxygen permeability. Sevenunit integrated-process design led to cost-effectiveness, energy-efficient and green cassava processing and biomaterials with zero-environment footprints. Desirable optimised bio-derivatives and films demonstrated application in desirable in-package O2/CO2, mouldgrowth inhibition, faster tablet excipient nutraceutical dissolutions and releases, and thymolencapsulated smooth antifungal coatings. Novel material resources, non-root peeling, zero-waste-elimination, and desirable standardised methodology present promising process integration tools for sustainable cassava biobased system development. Emerging design outcomes have potential applications to mitigate cyanide challenges and provide bio-derivative development pathways. Process system leads to zero-waste, with potential to reshape current style one-way processes into circular designs modelled on nature's effective approaches. Indigenous cassava components as natural material reinforcements, and SRRC processing approach has initiated a process with potential wider deployment in broad product research development. This research contributes to scientific knowledge in material science and engineering process design.

A test of basic psychological needs theory in young soccer players: Time-lagged design at the individual and team levels

Within the framework of basic psychological needs theory (Deci & Ryan, 2000), multilevel structural equation modeling (MSEM) with a time-lagged design was used to test a mediation model examining the relationship between perceptions of coaches’ interpersonal styles (autonomy supportive and controlling), athletes’ basic psychological needs (satisfaction and thwarting), and indicators of well-being (subjective vitality) and ill-being (burnout), estimating separately between and within effects. The participants were 597 Spanish male soccer players aged between 11 and 14 years (M = 12.57, SD = 0.54) from 40 teams who completed a questionnaire package at two time points in a competitive season. Results revealed that at the individual level, athletes’ perceptions of autonomy support positively predicted athletes’ need satisfaction (autonomy, competence, and relatedness), whereas athletes’ perceptions of controlling style positively predicted athletes’ need thwarting (autonomy, competence, and relatedness). In turn, all three athletes’ need satisfaction dimensions predicted athletes’ subjective vitality and burnout (positively and negatively, respectively), whereas competence thwarting negatively predicted subjective vitality and competence and relatedness positively predicted burnout. At the team level, team perceptions of autonomy supportive style positively predicted team autonomy and relatedness satisfaction. Mediation effects only appeared at the individual level.

Determinants of the Design and Use of PMS in Portuguese Government Agencies: A Complementary Theoretical Approach

Performance measurement is seen as a main pillar of public management reforms. However, prior research did not mitigate the level of ambiguity on PMS development and use and many questions left unanswered. Our findings provide knowledge on the design and use of PMS in the public sector answer- ing to calls for a complementary approach among institutional and contingency factors. The authors find that the design of PMS and the use of performance information for external purposes are increased to legitimate the organizational’ work and to obtain external support. Moreover, structural variables such as type of agency and management autonomy are also determinants on the organizational responses. Finally, the authors find some coupling between the design of PMS and outcomes. So, both contingent and institutional approaches play an important role on the empirical model.

El videojuego League of legends y su efecto en memoria de trabajo visual y solución de problemas

El propósito de este estudio es medir los efectos que tiene el videojuego League of Legends en los procesos cognitivos de memoria de trabajo visual (MVT) y solución de problemas (SP). Para medir dichos efectos se implementó un diseño pre test-post con un grupo experimental y uno control, compuestos cada uno por siete participantes, en donde se evaluaron los procesos previamente mencionados utilizando los cubos de Corsi para MVT y las matrices del WAIS III para SP. Después de realizar los respectivos entrenamientos se encontraron resultados significativos en los diferentes momentos de aplicación. En el grupo experimental se encontraron diferencias en la variable dependiente SP, mientras que en el grupo control en MVT, pero no en la interacción entre grupos ni diferencias entre grupos, lo que sugiere un efecto de familiarización a la prueba.

Journal of Architecture and Urbanism - Rethinking Le Corbusier: Urban Design and History

This is much more than a mere compilation of texts about Corbusian architecture. The articles gathered here focus on Le Corbusier’s reflections about the public space of earlier times and its influence upon his own output, the relationship of his designs with the pre-existing city, and other subjects drawn from all periods of his career and training that clarify the affinity that he established with the past through urban design. They are very heterogeneous, pointing off in different directions and marking the most diverse interests. But at the same time they are interconnected, in that they seek to shed light on the affinity that Le Corbusier established with the past from the point of view of urban design, and open up new perspectives about the public space in his work and its controversial relationship with history. This special issue thus bears witness once again to Le Corbusier’s inexhaustible legacy, but also to the usefulness of research on his work and thought – a subject about which it seemed that everything had already been said when, paradoxically, we now know that there is still almost everything left to say.

Long term performance evaluation of small-diameter vascular grafts based on polyvinyl alcohol hydrogel and dextran and MSCs-based therapies using the ovine pre-clinical animal model.

The functional and structural performance of a 5 cm synthetic small diameter vascular graft (SDVG) produced by the copolymerization of polyvinyl alcohol hydrogel with low molecular weight dextran (PVA/Dx graft) associated to mesenchymal stem cells (MSCs)-based therapies and anticoagulant treatment with heparin, clopidogrel and warfarin was tested using the ovine model during the healing period of 24 weeks. The results were compared to the ones obtained with standard expanded polyetetrafluoroethylene grafts (ePTFE graft). Blood flow, vessel and graft diameter measurements, graft appearance and patency rate (PR), thrombus, stenosis and collateral vessel formation were evaluated by B-mode ultrasound, audio and color flow Doppler. Graft and regenerated vessels morphologic evaluation was performed by scanning electronic microscopy (SEM), histopathological and immunohistochemical analysis. All PVA/Dx grafts could maintain a similar or higher PR and systolic / diastolic laminar blood flow velocities were similar to ePTFE grafts. CD14 (macrophages) and α-actin (smooth muscle) staining presented similar results in PVA/Dx/MSCs and ePTFE graft groups. Fibrosis layer was lower and endothelial cells were only detected at graft-artery transitions where it was added the MSCs. In conclusion, PVA/Dx graft can be an excellent scaffold candidate for vascular reconstruction, including clinic mechanically challenging applications, such as SDVGs, especially when associated to MSCs-based therapies to promote higher endothelialization and lower fibrosis of the vascular prosthesis, but also higher PR values.

Design of biobased additives for tuning the properties of biopolymers

This work mainly arises from the necessity to support the rapid introduction of different biobased polymers that the industrial sector has been facing lately. Indeed, while considerable efforts are being made to find environmentally and economically sustainable materials, less attention is paid to their need to be properly compounded to fulfil increasingly rigorous technical and quality requirements. Therefore, there is a strong demand for the development of a novel generation of compatible additives able to improve the properties of biobased polymers while respecting sustainability. With this in mind, a new class of biobased plasticizers is herein proposed. Five different ketal-diesters were selectively synthesized starting from levulinic acid, a promising renewable chemical platform. These molecules were added to poly(vinyl chloride) as model polymer to test their plasticizing effectiveness. Complete morphological, thermal and viscoelastic characterizations showed a clear correlation between the structural features of the ketal-esters and the properties of the material. In addition, no significant leaching was found in both hydrophilic and lipophilic environments. Importantly, the proposed ketal-diesters performed comparably and, in some cases, even better than commercial plasticizers. The same molecules were then added to bacterial poly(3-hydroxybutyrate), a semicrystalline polyester characterized by poor thermal and mechanical properties. Morphology assessments showed no phase separation and the plasticizing effectiveness was confirmed by thermal and viscoelastic analyses, while leaching tests showed low extraction values. Readily usable fractions with controlled structure and tailored properties were obtained from highly heterogeneous industrial grade Kraft lignin. These fractions were then added to poly(vinyl alcohol). Promising preliminary results in terms of compatibility were achieved, with thermograms showing only one glass transition temperature. Finally, a fully biobased glycerol-trilevulinate was successfully synthesized by means of a mild and solvent-free route. Its plasticizing effectiveness was evaluated on poly(vinyl chloride), showing a significant decrease of the glass transition temperature of the material.