999 resultados para Optimal experience
Resumo:
The aim of this study is to form the experience-based knowledge of diabetics. The broader intent is to be able to transform this experience-based knowledge as an asset within caring. In this study, a theoretical contact for the empirical data is presented through phronesis, i.e. practical wisdom. Phronesis can be seen as the most suitable form of knowledge to be able to deepen the individual's understanding of experiencebased knowledge. For this research, hermeneutic phenomenology was chosen. Abductive reasoning was the method chosen to approach the data collected through repeated deep interviews with individuals with personal experience of diabetes and the use of insulin pumps. The abductive approach fascilitates a broader interpretation of the primary empirical results via a theory of philosophy of science, such as phronesis, the life-world and the negativity of the experience. The latent message of the empirical data is thereby also additionally highlighted. The synthesis reveals that experience-based knowledge arrives with time, it is personified and praxis-oriented, and before this time, the knowledge and security must be provided by the established care, by people close to the individual or by other external sources. The experience-based knowledge has strenghts and weaknesses. The knowledge is further categorized by the individual's ability to discern and make judgement. Additionally, the experience-based kowledge is a reflecting and action-based knowledge striving to improve the care provided. The experience-based knowledge held by the individual is potentially a great instrument towards improving general knowledge with possible practical applications within the diabetic care. Furthermost, in practical suggestions to fascilitate care. In generally applying knowledge gathered from the individual's experiental point of view, there are inherent risks. These risks could potentially be eliminated through the adoption of a concept where the established care could function as a quality guarantor. A concept taking into account the experiencebased knowledge as a source of information and knowledge in the care for diabetics. Co-created knowledge and understanding is a position found in both self-care and pump-treatment. It is also found through the optimal application of the experience-based knowledge of the individual as well as the knowledge found within the established care, in order to fascilitate well-being. This as expressed by the individual's phronesis-based knowledge.
Resumo:
This study investigates futures market efficiency and optimal hedge ratio estimation. First, cointegration between spot and futures prices is studied using Johansen method, with two different model specifications. If prices are found cointegrated, restrictions on cointegrating vector and adjustment coefficients are imposed, to account for unbiasedness, weak exogeneity and prediction hypothesis. Second, optimal hedge ratios are estimated using static OLS, and time-varying DVEC and CCC models. In-sample and out-of-sample results for one, two and five period ahead are reported. The futures used in thesis are RTS index, EUR/RUB exchange rate and Brent oil, traded in Futures and options on RTS.(FORTS) For in-sample period, data points were acquired from start of trading of each futures contract, RTS index from August 2005, EUR/RUB exchange rate March 2009 and Brent oil October 2008, lasting till end of May 2011. Out-of-sample period covers start of June 2011, till end of December 2011. Our results indicate that all three asset pairs, spot and futures, are cointegrated. We found RTS index futures to be unbiased predictor of spot price, mixed evidence for exchange rate, and for Brent oil futures unbiasedness was not supported. Weak exogeneity results for all pairs indicated spot price to lead in price discovery process. Prediction hypothesis, unbiasedness and weak exogeneity of futures, was rejected for all asset pairs. Variance reduction results varied between assets, in-sample in range of 40-85 percent and out-of sample in range of 40-96 percent. Differences between models were found small, except for Brent oil in which OLS clearly dominated. Out-of-sample results indicated exceptionally high variance reduction for RTS index, approximately 95 percent.
Resumo:
OBJECTIVE: to evaluate the impact of stress in patients undergoing major surgeries under general anesthesia, relating their physical and psychic reactions to the different stages of stress. METHODS: we studied 100 adult patients of both genders, who were divided into two groups: Group 1 - 22 patients without experience with surgery; Group 2 - 78 patients previously submitted to medium and major surgery. To investigate the stress, we used the Inventory of Stress Symptoms for Adults, developed by Lipp, the day before the procedure and two days and seven days after the operation. The comparison of groups with respect to gender, pain, and percentage of stress were performed using the Chi-square test, and for the age variable the Student's t test was used. Differences were considered significant at p<0.05. RESULTS: the groups were not homogeneous as for the overall percentage of stress on the three measurements. G1 had decreased postoperative stress, whilst in G2 it increased. Psychological symptoms of stress prevailed in both groups. CONCLUSION: previous surgery reduced preoperative stress but did not affect postoperative emotional disorders.
Resumo:
We performed a systematic review of the literature on the surgical treatment of cleft lip, emphasizing the prevalence, complications associated with the treatment and the points of disagreement between authors. We conducted a literature cross-sectional search that analyzed publications in books, articles and on the databases SciELO - Scientific Electronic Library Online, PubMed, of the National Center for Biotechnology Information. We conclude that: 1) the severity of the cleft will indicate the technique presenting more advantages; 2) the different approaches indicate that there is no consensus on the optimal technique; and 3) the surgeon experience contributes to choosing the best option.
Resumo:
OBJECTIVE: To analyze the profile of patients served by the air medical rescue system in the Metropolitan Region of Campinas, evaluating: triage and mobilization criteria; response time; on-site care and transport time; invasive procedures performed in the Pre-Hospital Care (PHC); severity of patients; morbidity and mortality.METHODS: We conducted a prospective, descriptive study in which we analyzed medical records of patients rescued between July 2010 and December 2012. During this period, 242 victims were taken to the HC-Unicamp. Of the 242 patients, 22 were excluded from the study.RESULTS: of the 220 cases evaluated, 173 (78.6%) were male, with a mean age of 32 years. Blunt trauma was the most prevalent (207 cases - 94.1%), motorcycle accidents being the most common mechanisms of injury (66 cases - 30%), followed by motor vehicle collisions (51 cases - 23.2%). The average response time was 10 ± 4 minutes and the averaged total pre-hospital time was 42 ± 11 minutes. The mean values of the trauma indices were: RTS = 6.2 ± 2.2; ISS = 19.2 ± 12.6; and TRISS = 0.78 ± 0.3. Tracheal intubation in the pre-hospital environment was performed in 77 cases (35%); 43 patients (19.5%) had RTS of 7.84 and ISSd"9, being classified as over-triaged. Of all patients admitted, the mortality was 15.9% (35 cases).CONCLUSION: studies of air medical rescue in Brazil are required due to the investments made in the pre-hospital care in a country without an organized trauma system. The high rate of over-triage found highlights the need to improve the triage and mobilization criteria.
Resumo:
OBJECTIVE: to evaluate the outcome of abdominal wall integrity of both techniques. METHODS: a retrospective study was carried out at the Hospital das Clínicas, Faculdade de Medicina, Universidade de São Paulo, identifying the patients undergoing temporary abdominal closure (TAC) from January 2005 to December 2011. Data were collected through the review of clinical charts. Inclusion criteria were indication of TAC and survival to definitive abdominal closure. In the post-operative period only a group of three surgeons followed all patients and performed the reoperations. RESULTS: Twenty eightpatients were included. The difference in primary closure rates and mean time for fascial closure did not reach statistical significance (p=0.98 and p=0.23, respectively). CONCLUSION: VAC and Bogota Bag do not differ significantly regarding the outcome of abdominal wall integrity, due to the monitoring of a specific team and the adoption of progressive closure
Resumo:
Objective: To evaluate patients with chest trauma submitted to videothoracoscopy during hospitalization. In 2007, the Trauma Surgery Group was created in the General Surgery Department of the Hospital Municipal Lourenço Jorge of Rio de Janeiro-RJ, and started following all trauma victims who were admitted to the Hospital. Methods : We conducted a retrospective analysis of patients submitted to thoracoscopy from July 2007 to May 2015, based on a database started at the beginning of this period and on data collection from patients who underwent thoracoscopy. We evaluated the following parameters: procedure effectiveness, indication of the procedure, conversion rate, complications and mortality. We included patients who presented post-traumatic pleural collections, such as retained hemothorax and pleural empyema, and penetrating injury in the thoracoabdominal transition. All patients were hemodynamic stable and signed an informed consent. Results: In the analyzed period 53 patients were submitted to videothoracoscopy; 24 had penetrating trauma (45.3%) and 29, blunt (54.7%), with a predominance of males (75.5%). The procedure was performed in 26 cases of retained hemothorax (49%), 14 cases of empyema (26.5%) and in 13 patients for evaluation of injury in the thoracoabdominal transition (24.5%). The thoracoscopy was effective in resolution of 36 cases (80%), without need for further procedure. There was a conversion rate of 15.5% and 3 procedure complications related (6.6%). Mortality was nil. Conclusion: In this series, videothoracoscopy proved that this diagnostic and therapeutic procedure is safe and effective, if performed by a surgeon with appropriate training, especially when it is indicated in cases of retained hemothorax and evaluation of penetrating thoracoabdominal trauma.
Resumo:
Sequestration of carbon dioxide in mineral rocks, also known as CO2 Capture and Mineralization (CCM), is considered to have a huge potential in stabilizing anthropogenic CO2 emissions. One of the CCM routes is the ex situ indirect gas/sold carbonation of reactive materials, such as Mg(OH)2, produced from abundantly available Mg-silicate rocks. The gas/solid carbonation method is intensively researched at Åbo Akademi University (ÅAU ), Finland because it is energetically attractive and utilizes the exothermic chemistry of Mg(OH)2 carbonation. In this thesis, a method for producing Mg(OH)2 from Mg-silicate rocks for CCM was investigated, and the process efficiency, energy and environmental impact assessed. The Mg(OH)2 process studied here was first proposed in 2008 in a Master’s Thesis by the author. At that time the process was applied to only one Mg-silicate rock (Finnish serpentinite from the Hitura nickel mine site of Finn Nickel) and the optimum process conversions, energy and environmental performance were not known. Producing Mg(OH)2 from Mg-silicate rocks involves a two-staged process of Mg extraction and Mg(OH)2 precipitation. The first stage extracts Mg and other cations by reacting pulverized serpentinite or olivine rocks with ammonium sulfate (AS) salt at 400 - 550 oC (preferably < 450 oC). In the second stage, ammonia solution reacts with the cations (extracted from the first stage after they are leached in water) to form mainly FeOOH, high purity Mg(OH)2 and aqueous (dissolved) AS. The Mg(OH)2 process described here is closed loop in nature; gaseous ammonia and water vapour are produced from the extraction stage, recovered and used as reagent for the precipitation stage. The AS reagent is thereafter recovered after the precipitation stage. The Mg extraction stage, being the conversion-determining and the most energy-intensive step of the entire CCM process chain, received a prominent attention in this study. The extraction behavior and reactivity of different rocks types (serpentinite and olivine rocks) from different locations worldwide (Australia, Finland, Lithuania, Norway and Portugal) was tested. Also, parametric evaluation was carried out to determine the optimal reaction temperature, time and chemical reagent (AS). Effects of reactor types and configuration, mixing and scale-up possibilities were also studied. The Mg(OH)2 produced can be used to convert CO2 to thermodynamically stable and environmentally benign magnesium carbonate. Therefore, the process energy and life cycle environmental performance of the ÅAU CCM technique that first produces Mg(OH)2 and the carbonates in a pressurized fluidized bed (FB) were assessed. The life cycle energy and environmental assessment approach applied in this thesis is motivated by the fact that the CCM technology should in itself offer a solution to what is both an energy and environmental problem. Results obtained in this study show that different Mg-silicate rocks react differently; olivine rocks being far less reactive than serpentinite rocks. In summary, the reactivity of Mg-silicate rocks is a function of both the chemical and physical properties of rocks. Reaction temperature and time remain important parameters to consider in process design and operation. Heat transfer properties of the reactor determine the temperature at which maximum Mg extraction is obtained. Also, an increase in reaction temperature leads to an increase in the extent of extraction, reaching a maximum yield at different temperatures depending on the reaction time. Process energy requirement for producing Mg(OH)2 from a hypothetical case of an iron-free serpentine rock is 3.62 GJ/t-CO2. This value can increase by 16 - 68% depending on the type of iron compound (FeO, Fe2O3 or Fe3O4) in the mineral. This suggests that the benefit from the potential use of FeOOH as an iron ore feedstock in iron and steelmaking should be determined by considering the energy, cost and emissions associated with the FeOOH by-product. AS recovery through crystallization is the second most energy intensive unit operation after the extraction reaction. However, the choice of mechanical vapor recompression (MVR) over the “simple evaporation” crystallization method has a potential energy savings of 15.2 GJ/t-CO2 (84 % savings). Integrating the Mg(OH)2 production method and the gas/solid carbonation process could provide up to an 25% energy offset to the CCM process energy requirements. Life cycle inventory assessment (LCIA) results show that for every ton of CO2 mineralized, the ÅAU CCM process avoids 430 - 480 kg CO2. The Mg(OH)2 process studied in this thesis has many promising features. Even at the current high energy and environmental burden, producing Mg(OH)2 from Mg-silicates can play a significant role in advancing CCM processes. However, dedicated future research and development (R&D) have potential to significantly improve the Mg(OH)2 process performance.
Resumo:
PURPOSE: To evaluate changes to the pelvic floor of primiparous women with different delivery modes, using three-dimensional ultrasound. METHODS: A prospective cross-sectional study on 35 primiparae divided into groups according to the delivery mode: elective cesarean delivery (n=10), vaginal delivery (n=16), and forceps delivery (n=9). Three-dimensional ultrasound on the pelvic floor was performed on the second postpartum day with the patient in a resting position. A convex volumetric transducer (RAB4-8L) was used, in contact with the large labia, with the patient in the gynecological position. Biometric measurements of the urogenital hiatus were taken in the axial plane on images in the rendering mode, in order to assess the area, anteroposterior and transverse diameters, average thickness, and avulsion of the levator ani muscle. Differences between groups were evaluated by determining the mean differences and their respective 95% confidence intervals. The proportions of levator ani muscle avulsion were compared between elective cesarean section and vaginal birth using Fisher's exact test. RESULTS: The mean areas of the urogenital hiatus in the cases of vaginal and forceps deliveries were 17.0 and 20.1 cm², respectively, versus 12.4 cm² in the Control Group (elective cesarean). Avulsion of the levator ani muscle was observed in women who underwent vaginal delivery (3/25), however there was no statistically significant difference between cesarean section and vaginal delivery groups (p=0.5). CONCLUSION: Transperineal three-dimensional ultrasound was useful for assessing the pelvic floor of primiparous women, by allowing pelvic morphological changes to be differentiated according to the delivery mode.
Resumo:
Potilaan hoitamisessa korostuvat mm. triagen tekeminen, potilaan voinnin seuranta ja hoitoa koskevien päätösten tekeminen nopeasti potilaan voinnin mukaan sekä potilaan jatkohoidon turvaaminen. Tämä kaksivaiheinen koulutustutkimus kohdistui päivystyshoitotyön osaamiseen. Tutkimuksen ensimmäisessä vaiheessa määriteltiin päivystyshoitotyön osaaminen ja toisessa vaiheessa arvioitiin valmistuvien sairaanhoitajaopiskelijoiden päivystyshoitotyön osaamista ja osaamiseen yhteydessä olevia tekijöitä. Osaamisen arvioinnin suorittivat opiskelijat itse ja vertailuperustana opiskelijoiden päivystyshoitotyön osaamiselle käytettiin ammatissa toimivien sairaanhoitajien päivystyshoitotyön osaamista. Tutkimuksen tavoitteena oli arvioinnin perusteella määrittää päivystyshoitotyön osaamisen nykytaso ja tehdä tarvittavat ehdotukset päivystyshoitotyön osaamisen kehittämiseen. Tutkimuksen ensimmäisessä vaiheessa (2006–2012) tiedonkeruumenetelminä oli kirjallisuuskatsaus ja asiantuntija-arviointi hyödyntäen delphi-menetelmää. Kirjallisuuskatsauksen perusteella muodostettiin päivystyshoitotyön osaamista kuvaavat pääkategoriat, yläkategoriat ja alakategoriat.Alakategoriat (n=61) annettiin asiantuntijoille (sairaanhoitajat, opettajat, ylihoitajat) arvioitavaksi.Kaksivaiheisen asiantuntija-arvioinnin perusteella muodostui 92 päivystyshoitotyön osaamista kuvaavaa alakategoriaa. Tutkimuksen toisessa vaiheessa (2007–2012) valmistuvien suomalaisten sairaanhoitaja-opiskelijoiden (N=382, n=208, vastausprosentti 55 %) päivystyshoitotyön osaamista arvioitiin tätä tutkimusta varten kehitetyllä mittarilla (Päivystyshoitotyön osaaminen -mittari). Mittari perustui tutkimuksen ensimmäisessä vaiheessa muodostettuun määrittelyyn päivystyshoitotyön osaamisesta. Osaamista mitattiin VAS-janalla (asteikko 0–100) arvon 100 ollessa optimaalinen taso, johon pyrittiin. Sairaanhoitajaopiskelijoiden tavoiteltavaksi osaamisen tasoksi asetettiin 80 olettaen opiskelijoiden osaamisen vielä kehittyvän työkokemuksen myötä. Ammatissa toimivien sairaanhoitajien (N=586, n=280, vastausprosentti 48 %) itsearvioitua osaamista käytettiin vertailuperustana opiskelijoiden osaamiselle. Aineisto analysoitiin tilastollisin menetelmin. Valmistuvien sairaanhoitajaopiskelijoiden itsearvioitu päivystyshoitotyön osaaminen oli alle tavoiteltavan osaamisen tason. Opiskelijoilla oli mielestään eniten eettistä osaamista sekä vuorovaikutus- ja yhteistyöosaamista ja vähiten päätöksenteko-osaamista ja kliinistä osaamista. Myös ammatissa toimivilla sairaanhoitajilla oli mielestään eniten vuorovaikutus- ja yhteistyöosaamista. Vähiten heillä oli ohjausosaamista ja päätöksenteko-osaamista. Sairaanhoitajilla oli tilastollisesti merkitsevästi enemmän päivystyshoitotyön osaamista kuin opiskelijoilla. Opiskelijoiden päivystyshoitotyön osaamista selitti eniten aikaisempi terveysalan tutkinto. Päivystyshoitotyön osaamisen kehittämisehdotukset kohdistuvat ammatillisen peruskoulutuksen ja täydennyskoulutuksen opetuksen sisältöihin ja määrään, opetus- ja opiskelumenetelmiin, osaamisen arviointiin sekä urasuunnitteluun. Jatkotutkimusehdotukset kohdistuvat päivystyshoitotyön osaamisen määrittelyn ja osaamista arvioivan mittarin edelleen kehittämiseen, erilaisten arviointimenetelmien kehittämiseen sekä osaamiseen yhteydessä olevien tekijöiden edelleen tutkimiseen.
Resumo:
I min avhandling undersöker jag av kriget framkallade psykiska störningar hos finländska soldater under fortsättningskriget. Vilka var de psykiskt invalidiserade soldaterna och hurudana var deras traumatiska erfarenheter? Vilken var den bredare upplevelsevärlden vid fronten där störningarna uppstod, och hur kan man förklara att majoriteten av soldaterna ändå klarade sig utan mentala rubbningar i denna av våld präglade miljö? Hur förhöll sig Finlands armé i allmänhet och den krigspsykiatri som utvecklades under kriget specifikt till soldaternas psykiska störningar? Som Matti Ponteva redan 1977 utredde, det totala antalet psykiatriska soldatpatienter under fortsättningskriget var ca 15 700 män. I min undersökning betonar jag att den siffran omfattar endast en del av fenomenet: långt ifrån alla finländska soldater som uppvisade psykiska symptom förpassades från fronten i psykiatrisk vård. De finländska psykiatrerna hade före vinterkriget inte kommit i direkt kontakt med av krig orsakade psykiska störningar. Deras kunskaper kom nästan uteslutande från den tyska krigspsykiatrin, där den ledande tanken framför allt efter första världskriget var att förklara psykiska störningar med soldaternas personliga brister och svagheter. Slutligen resonerar jag, varför synen på soldaternas psykiska störningar på ett så markant sätt skilde sig från synen på andra krigsskador. Att soldater stupade eller sårades fysiskt kunde framställas som yttringar av manligt hjältemod och offervillighet. Att brytas ner psykiskt av kriget blev däremot en tom symbol för våldet och saknade annat innehåll än uttryckligen en meningslöshet. Psykiska störningar associerades med ett moraliskt fördömande och ett stigma av skam, och förutom att man tenderade att förneka och marginalisera deras existens försökte man göra en skillnad mellan dem och den egentliga krigsupplevelsen. Det har varit problematiskt att inkludera de psykiskt rubbade soldaterna i den nationella historieskrivningen fram till våra dagar.
Resumo:
Heli Kautonen's presentation in the LIBER Conference 27 June, 2013 in Munich, Germany.
Resumo:
In this Master’s thesis agent-based modeling has been used to analyze maintenance strategy related phenomena. The main research question that has been answered was: what does the agent-based model made for this study tell us about how different maintenance strategy decisions affect profitability of equipment owners and maintenance service providers? Thus, the main outcome of this study is an analysis of how profitability can be increased in industrial maintenance context. To answer that question, first, a literature review of maintenance strategy, agent-based modeling and maintenance modeling and optimization was conducted. This review provided the basis for making the agent-based model. Making the model followed a standard simulation modeling procedure. With the simulation results from the agent-based model the research question was answered. Specifically, the results of the modeling and this study are: (1) optimizing the point in which a machine is maintained increases profitability for the owner of the machine and also the maintainer with certain conditions; (2) time-based pricing of maintenance services leads to a zero-sum game between the parties; (3) value-based pricing of maintenance services leads to a win-win game between the parties, if the owners of the machines share a substantial amount of their value to the maintainers; and (4) error in machine condition measurement is a critical parameter to optimizing maintenance strategy, and there is real systemic value in having more accurate machine condition measurement systems.
Resumo:
In recent years the analysis and synthesis of (mechanical) control systems in descriptor form has been established. This general description of dynamical systems is important for many applications in mechanics and mechatronics, in electrical and electronic engineering, and in chemical engineering as well. This contribution deals with linear mechanical descriptor systems and its control design with respect to a quadratic performance criterion. Here, the notion of properness plays an important role whether the standard Riccati approach can be applied as usual or not. Properness and non-properness distinguish between the cases if the descriptor system is exclusively governed by the control input or by its higher-order time-derivatives additionally. In the unusual case of non-proper systems a quite different problem of optimal control design has to be considered. Both cases will be solved completely.