986 resultados para Food utilization efficiencies
Resumo:
A model is developed to investigate the trade-offs between benefits and costs involved in zooplanktonic diel vertical migration (DVM) strategies. The 'venturous revenue' (VR) is used as the criterion for optimal trade-offs. It is a function of environmental factors and the age of zooplankter. During vertical migration, animals are assumed to check instantaneously the variations of environmental parameters and thereby select the optimal behavioral strategy to maximize the value of VR, i.e. taking up as much food as possible with a certain risk of mortality. The model is run on a diel time scale (24 h) in four possible scenarios during the animal's life history. The results show that zooplankton can perform normal DVM balancing optimal food intake against predation risk, with the profile of DVM largely modified by the age of zooplankter.
Resumo:
A 21-d laboratory experiment was conducted to study, the phosphorus (P) utilization of two different diets by redlip mullet Liza haematocheila T. & S. Sand-filtered water in salinity 30 and temperature 25 degrees C was used. Twenty-nine fish individuals were divided into three groups: 11 to group 1 (G1) fed on diet 1, 11 to group 2 (G2) fed on diet 2, and 7 to contrast group. Diet 1 was a commercial feed, more valuable in nutrition than diet 2 that similar to natural detritus. The results show the intake phosphorus (IP) of G1 was significantly higher than that of G2, and both increased linearly with body size at a certain amount of diet. The retention phosphorus (RP) in fish of G1 was lower than G2. The relationship between retention phosphorus and body size was positive and stronger in G2. Significant difference in faecal phosphorus (FP) was found between G1 and G2. Body size significantly impacted the excretion phosphorus (EP) in G1 but G2. The loss of intake phosphor-us in G1 was 10.83-20.27 mg per g fish weight gain, higher than that in G2 for 6.63-9.56. Of the phosphor-us, about 10% was allocated into growth, 50% in faeces, and the rest lost in excretion. The main part of phosphorus was lost in faeces but excretion. The phosphorus budget of the fish could be described as 100IP = 7.40RP + 47.39FP + 36.63EP (Diet 1) or 100IP = 11.93RP + 56.64FP + 21.76EP (Diet 2).
Resumo:
Objective To study the transfer of paralytic shellfish toxins (PST) using four simulated marine food chains: dinoflagellate Alexandrium tamarense -> Arterriia Artemia salina -> Mysid shrimp Neomysis awatschensis; A. tamarense-N. awatschensis: A. taniarense A. salina -> Perch Lateolabrax japonicus; and A. tamarense -> L. japonicus. Methods The ingestion of A. tamarense, a producer of PST, by L. japonicus, N. awatschensis, and A. salina was first confirmed by microscopic observation of A. tamarense cells in the intestine samples of the three different organisms, and by the analysis of Chl.a levels iii the samples. Toxin accumulation in L. japonicus and N. awatschensis directly from the feeding on A. tamarense or indirectly ibrough the vector of A. salina was then studied. The toxicity of samples was measured using the AOAC mouse bioassay method, and the toxin content and profile of A. tamarense were analyzed by the HPLC method. Results Both A. salina and N. awatschensis could ingest A. tamarense cells. However, the ingestion capability of A. salina exceeded that of N. awatschensis. After the exposure to the culture of A. tamarense (2 000 cells(.)mL(-1)) for 70 minutes, the content of ChLa in A. salina and N. awatschensis reached 0.87 and 0.024 mu g-mg(-1), respectively. Besides, A. tamarense cells existed in the intestines of L. japonicus, N. awatschensis and A. salina by microscopic observation. Therefore, the three organisms could ingest A. tamarense cells directly. A. salina could accumulate high content of PST, and the toxicity of A. salina in samples collected on days 1, 4, and 5 of the experiment was 2.18, 2.6, and 2.1 MU(.)g(-1), respectively. All extracts from the samples could lead to death of tested mice within 7 minutes, and the toxin content in arternia sample collected on the 1st day was estimated to be 1.65x10(-5) pg STX equa Vindividual. Toxin accumulation in L. japonicus and N. awatschensis directly from the feeding on A. tamarense or indirectly froin the vector of A. salina was also studied. The mice injected with extracts from L. japonicus and N. awatschensis samples that accumulated PST either directly or indirectly showed PST intoxication symptoms, indicating that low levels of PST existed in these samples. Conclusion Paralytic shellfish toxins can be transferred to L. japonicus, N. awatschensis, and A. salina from A. taniarense directly or indirectly via the food chains.
Resumo:
Food Sources of three filter-feeding bivalves from two habitats (intertidal oyster Crassostrea gigas, mussel Mytilus galloprovincialis. and subtidal cultured scallop Chlamys farreri) of Jiaozhou Bay (Qingdao,China) were determined by fatty acid and stable isotope in analysis. Cultured scallop was characterized by significant diatom markets such as 16:1/16:0 close to 1 and high ratio of 20:5(n - 3)/22:6(n - 3), hence we assume that the scallop mainly feeds on diatoms. Fatty acid biomarkers specific to bacteria and terrestrial materials were also found in considerable amounts in scallop tissue, which suggested that there were Substantial bacterial and terrestrial input into the food of the species. Intertidal oyster and mussel, however, exhibited significant flagellate marker. 22:6(n - 3). and lower level of diatom markers. which indicated that flagellates are also part of intertidal bivalves' Planktonic food Sources: meanwhile, high level of Chlorophyta fatty acid marker, Sigma 18:2(n - 6) + 18:3(n - 3), suggested that Ulva pertusa (Chlorophyta) seaweed bed supplied important food sources to intertidal bivalves. Additionally, result of stable isotope analysis showed that phytoplankton contributed 86.2 to 89.0% to intertidal bivalves' carbon budget; macroalga U. pertusa origin source had a contribution of MIX, to 11.0%, which indicated its role Lis in important supplemental food source to intertidal bivalves. From this study. it is concluded that the dietary difference of three bivalves probably relates to the different potential food sources in the scallop farm and intertidal zone in Jiaozhou Bay.
Resumo:
Planktonic microbial community structure and classical food web were investigated in the large shallow eutrophic Lake Taihu (2338 km(2), mean depth 1.9 m) located in subtropical Southeast China. The water column of the lake was sampled biweekly at two sites located 22 km apart over a period of twelve month. Site 1 is under the regime of heavy eutrophication while Site 2 is governed by wind-driven sediment resuspension. Within-lake comparison indicates that phosphorus enrichment resulted in increased abundance of microbial components. However, the coupling between total phosphorus and abundance of microbial components was different between the two sites. Much stronger coupling was observed at Site 1 than at Site 2. The weak coupling at Site 2 was mainly caused by strong sediment resuspension, which limited growth of phytoplankton and, consequently, growth of bacterioplankton and other microbial components. High percentages of attached bacteria, which were strongly correlated with the biomass of phytoplankton, especially Microcystis spp., were found at Site 1 during summer and early autumn, but no such correlation was observed at Site 2. This potentially leads to differences in carbon flow through microbial food web at different locations. Overall, significant heterogeneity of microbial food web structure between the two sites was observed. Site-specific differences in nutrient enrichment (i.e. nitrogen and phosphorus) and sediment resuspension were identified as driving forces of the observed intra-habitat differences in food web structure.
Resumo:
Proven by the petroleum exploration activities, the karsts-fissure reservoir in carbonate rocks is significant to find out the large scale oil & gas field. They are made up of the four reservoir types: karsts-cave, karsts-crack, crack-cave and fracture-pore-cave. Each reservoir space and each reservoir bed has different features of reservoir heterogeneity and small scale of pore-crack-cave. The fracture-cave reservoir in carbonate rocks is characteristic by multi-types and long oiliness well. The reservoir shape is controlled by the irregular pore-crack-cave. The development level of fracture and karst-cave is the key element of hydrocarbon enriching, high productivity and stable production. However, most of Carbonate formation are buried deeply and the signal-ration-noise of seismic reflection are very low. It is reason why the fracture-cave reservoir are difficult to be predicted effectively. In terms of surveyed and studied lots of the former research outcome, The author applied the methods of synthetical reservoir geophysical prediction from two ways including macrosopic and microcomic technics in terms of the reservoir-cap condition, geophysics and geology feature and difficulty of prediction in carbonate rocks. It is guiden by the new ideas of stratigraphy, sedimentology, sedimentography, reservoir geology and karst geology. The geophysics technology is key technics. In aspects of macroscopic studies, starting off the three efficiencies of controlling the reservoir distribution including sedimental facies, karst and fracture, by means of comprehensive utilization of geology, geophysics, boring well and well log, the study of reservoir features and karst inside story are developed in terms of data of individual well and multiple well. Through establishing the carbonate deposition model, karstic model and fracture model, the macro-distribution laws of carbonatite are carried out by the study of coherence analysis, seismic reflection feature analysis and palaeotectonics analysis. In aspects of microcosmic studies, starting off analysis in reservoir geophysical response feature of fracture and karst-cave model according to guidance of the macroscopic geological model in carbonate reservoir, the methods of the carbonate reservoir prediction are developed by comprehensively utilization of seismic multi-attribution intersection analysis, seismic inversion restricted by log, seismic discontinuity analysis, seimic spectrum attenuation gradient, moniliform reflection feature analysis and multiparameter karst reservoir appraisement.Through application of carbonate reservoir synthetical geophysics prediction, the author r successfully develops the beneficial reservoir distribution province in Ordovician of Katake block 1in middle Tarim basin. The fracture-cave reservoir distributions are delineated. The prospect direction and favorable aims are demonstrated. There are a set of carbonate reservoir prediction methods in middle Tarim basin. It is the favorable basic technique in predicting reservoir of the Ordovician carbonate in middle Tarim. Proven by exploration drilling, the favorable region of moniliform reflection fracture and pore-cave and cave-fracture in lower-middle Ordovician are coincidence with the region of hydrocarbon show. It’s indicated that the reservoir prediction methods described in the study of Ordovician carbonate formation are feasible practicably.
Resumo:
Platinum utilization in the gas-diffusion catalyst layer and thin-film catalyst layer is investigated. The morphology of PTFE and Nafion in a simulated catalyst layer is examined by scanning electronmicroscopy (SEM) and transmission electron microscopy (TEM). The results show that the platinum utilization of the thin-film catalyst layer containing only Pt/C and Nafion is 45.4%. The low utilization is attributed to the fact that the electron conduction of many catalyst particles is impaired by some thick Nafion layers or clumps. For the gas-diffusion (E-TEK) electrode, the platinum utilization is mainly affected by the proton conduction provided by Nafion. The blocking effect of PTFE on the active sites is not serious. When the electrode is sufficiently impregnated with Nafion by an immersion method, the platinum utilization can reach 77.8%. Transmission electron micrographs reveal that although some thick Nafion layers and clumps are observed in the Pt/C + Nafion layer, the distribution of Nafion in the catalyst layer is basically uniform. The melted PTFE disperses in the catalyst layer very uniformly. No large PTFE clumps or wide net-like structure is observed. The reactant gas may have to diffuse evenly in the catalyst layer. (C) 1999 Elsevier Science S.A. All rights reserved.
Resumo:
The aim of the present study was to assess the factors which may influence the timing of the introduction of solid food to infants. The design was a prospective cohort study by interview and postal questionnaire. Primiparous women (n 541) aged between 16 and 40 years were approached in the Forth Park Maternity Hospital, Fife, Scotland. Of these, 526 women agreed to participate and seventy-eight were used as subjects in the pilot study. At 12 weeks we interviewed 338 women of the study sample. The postal questionnaire was returned by 286 of 448 volunteers. At 12 weeks 133 of 338 mothers said that they had introduced solids. Those that said that they had introduced solids early (<12 weeks) were compared with those who had introduced solids late (>12 weeks) by bivariate and multiple regression analysis. Psychosocial factors influencing the decision were measured with the main outcome measure being the time of introduction of solid food. The early introduction of solids was found to be associated with: the opinions of the infant's maternal grandmother; living in a deprived area; personal disagreement with the advice to wait until the baby was 4 months; lack of encouragement from friends to wait until the baby was 4 months; being in receipt of free samples of manufactured food. Answers to open-ended questions indicated that the early introduction appeared to be influenced by the mothers’ perceptions of the baby's needs. Some of the factors influencing a woman's decision to introduce solids are amenable to change, and these could be targeted in educational interventions.
Resumo:
Purpose –The research examines the sales process practised by SMEs, and barriers and enablers that hinder and support effective selling practices from the selling organisation’s perspective in Scottish-based Food and Drink firms. Design/methodology approach - – The paper adopts an interpretivist perspective with qualitative data gathered through face-to-face semi-structured interviews. 20 people involved in selling activities were interviewed from 15 SMEs across Scotland. Thematic analysis established key findings regarding the sales process practice. Findings – Five themes emerged that affect the operationalisation of the selling process: the owner manager has considerable involvement in the sales process, SMEs with some degree of sales knowledge take a more systematic approach, SMEs lack awareness of how CRM technology can assist them, power is tipped in favour of the buyer and, the geographic location of the SME places constraints on how SMEs conduct business Research limitation/implication – Thematic analysis was chosen over other more traditional methods due to the lack of relevant quantitative data. The phenomenon of the research and research methodology means that it will not be possible to repeat this study and replicate its findings. However, the process that has been adopted does provide a basis for future research. Originality/value - The paper identifies areas where future research is required in the field alongside suggestions where policy makers and government business agencies might focus intervention to assist SMEs improve delivery of the sales process and selling effectiveness
Resumo:
T. G. Williams, J.J. Rowland, and Lee M.H., Robotic Assembly of Naturally Varying Food Items via Teaching by Example, 9th Int. Symp. on Intelligent Robotic Systems (SIRS 2001), July 2001, France, pp133-142.
Resumo:
T. G. Williams, J.J. Rowland, and Lee M.H., Teaching from Examples in Assembly and Manipulation of Snack Food Ingredients by Robot, Proc. IEEE/RSJ Int. Conf. on Robots and Systems (IROS 2001), Nov., 2001, pp2300-2305.
Resumo:
T. G. Williams, J.J. Rowland, Lee M.H. and M.J. Neal Teaching by Example in Food Assembly by Robot, Proc. 2000 IEEE Int. Conf. On Robotics and Automation, San Francisco, April 2000, pp3247-52.
Resumo:
C.R. Bull, R. Zwiggelaar and R.D. Speller, 'Review of inspection techniques based on the elastic and inelastic scattering of X-rays and their potential in the food and agricultural industry', Journal of Food Engineering 33 (1-2), 167-179 (1997)
Resumo:
R. Zwiggelaar, C.R. Bull, and M.J. Mooney, 'X-ray simulations for imaging applications in the agricultural and food industry', Journal of Agricultural Engineering Research 63(2), 161-170 (1996)
Resumo:
A European Perspective on the Precautionary Principle, Food Safety and the Free Trade Imperative of the WTO. European Law Review, Vol.27, No.2. April 2002, pp.138-155. RAE2008