977 resultados para C(1) and C(6): control (1 and 6 h 100% Oxygen saturation, normoxic)


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background: Acute viral bronchiolitis is a respiratory disease with high morbidity that affects newborn in the first two years of life. Its treatment with physiotherapy has been highlighted as an important tool, however, there is no consensus regarding its effects on patients improvement. We aimed to evaluate the physiological parameters before and after the procedure respiratory therapy in newborn with acute viral bronchiolitis. Method: This was a cross sectional observational study in 30 newborns with acute viral bronchiolitis and indicated for physiotherapy care in a hospitalized Urgency and Emergency Unit. It was collected the clinical data of newborn through evaluation form, and we measured heart rate (HR), oxygen saturation (SpO2) and respiratory rate (RR). We measured the variables before physiotherapy treatment, 3, 6 and 9 minutes after the physiotherapy treatment. Results: There has been no change in HR, however, we observed a decrease in RR at 6 and 9 min compared to 3 min and increase in SpO2 at 3, 6 and 9 min compared to before physiotherapy. Conclusion: Respiratory physiotherapy may be an effective therapy for the treatment of newborn with Acute Viral Bronchitis.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this study was to evaluate cardiovascular and respiratory effects associated with neck flexion, subarachnoid puncture, cerebrospinal fluid drainage and the subarachnoid infusion of ioversol (320mgl/mL) in dogs under isoflurane general anesthesia. The dogs received infusion of: autologous cerebrospinal fluid at 38 degrees C (GC - control group); ioversol 0.3mL/ Kg at 25 degrees C (GI25) and heated to 38 degrees C (GI38). Heart rate, systolic and diastolic arterial pressure, respiratory rate, oxyhemoglobin saturation and electrocardiography readings were recorded. The results showed that cervical myelography with ioversol 320mgl/mL at 0.3mL/Kg (25 C-degrees and 38C degrees) did not significantly alter recorded parameters, except for an elevation in arterial pressure.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study focuses on metasedimentary rocks from the Passos Nappe in São Sebastião do Paraíso, southern Minas Gerais, Brazil. These rocks belong to the Internal Domain (Araxa Group) of the Southern Brasilia Belt, a Neproterozoic orogenic belt associated to the formation of the Gondwana Supercontinent. Rocks from the studied area are characterized by an inverted metamorphic gradient. Previously calculated metamorphic conditions show an increasing from geenschist facies at the base (450°C, 6 kbar), to upper amphibolite facies (750°C, 11 Kbar) at the top of the sequence. However, most of these estimates are based on Fe-Mg exchange thermometers and peak temperatures may be underestimated due to Fe-Mg exchange from cooling after peak metamorphism. In this study, we present new PT results for these rocks, based on metamorphic mineral assemblage LA-ICP-MS analyses. In the studied area, rocks from the top of the sequence have a typical granulite facies mineral assemblage: Grt+Ky+Kfs+/-Pl+liq. These rocks lack muscovite and have only minor amounts of Ti-rich, dark brown biotite. In a simplified NaKFMASH system the stability field for this mineral assemblage is bounded by the reactions Sil = Ky on the low pressure side, Ms+Ab = Ky+Kfs+liq on the low temperature side and for high-Mg bulk compositions Bt + Grt = Opx + Ky + liq on the high-temperature side. Minimum temperatures (considering post-peak reequilibration) of ca. 750°C are obtained by Fe/(Fe+Mg) values of 0.7 in garnets from a Grt+Ky+Kfs bearing sample. LA-ICP-MS results obtained for three samples show that rutiles included in garnets have up to 1847 ppm of Zr, which would translate into temperatures up to 830°C for a pressure between 12 to 15 kbar. Also for retroeclogite sample, the results indicate the contents of Zr in the garnet 537 ppm at a temperature of 708 ° C. It is noteworthy that several occurrences of retroeclogites occur in the upper part of the sequence and pressures...

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pós-graduação em Biociências - FCLAS

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction: The study of graft donor sites, whether from the anatomical, physiological or morphological point of view, has become a topic of current interest, due to the increasing number of patients needing facial bone reconstruction for various reasons. Purpose: In view of the need to constantly improve surgical techniques for autogenous bone graft harvesting, still considered the best choice for facial bone reconstruction, this paper describes an anatomical study on dry skulls in order to evaluate the average thickness of the parietal bone. Material and Methods: Measurements of this bone were taken with a goniometer, at four previously defined points, in the region that is often used as a donor site, in 49 dry skulls (98 parietal bones). The results were evaluated using the T test. Results: Thickness was measured at four predetermined points. The mean values (Point A = 4898mm, B = 4517mm, C = 6185mm, D = 4280mm) show that the bone can be even thinner than previously reported in the literature in other studies of the same nature. The largest bone thickness is in the medial and posterior region. Conclusion: A knowledge of these anatomical characteristics is helpful in preventing possible surgical complications, as well as making it safer for the surgeon to remove this graft and providing more information on whether or not to indicate this region as a bone graft donor site.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this study was to evaluate the effect of occlusal contact area for loading on the cuspal defection and stress distribution in a first premolar restored with a high elastic modulus restorative material. The Rhinoceros 4.0 software was used for modeling the three-dimensional geometries of dental and periodontal structures and the inlay restoration. Thus, two different models, intact and restored teeth with three occlusal contact areas, 0.1, 0.5 and 0.75 mm(2), on enamel at the occlusal surface of buccal and lingual cusps. Finite element analysis (FEA) was performed with the program ANSYS (Workbench 13.0), which generated a mesh with tetrahedral elements with greater refinement in the regions of interest, and was constrained at the bases of cortical and trabecular bone in all axis and loaded with 100 N normal to each contact area. To analysis of maximum principal stress, the smaller occlusal contact area showed greater compressive stress in region of load application for both the intact and inlay restored tooth. However, tensile stresses at the occlusal isthmus were similar for all three tested occlusal contact areas (60 MPa). To displacement of the cusps was higher for teeth with inlay (0.46-0.48 mm). For intact teeth, the smaller contact area showed greater displacement (0.10 mm). For teeth with inlays, the displacement of the cusps were similar in all types of occlusal area. Cuspal displacement was higher in the restored tooth when compared to the intact tooth, but there were no significant variations even with changes in the occlusal contact area. RELEVANCE CLINICAL: Occlusal contacts have a great influence on the positioning of teeth being able to maintain the position and stability of the mandible. Axial loads would be able to generate more uniform stress at the root presenting a greater concentration of load application in the point and the occlusal surface. Thus, is necessary to analyze the relationship between these occlusal contacts as dental wear and subsequent occlusal interferences.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study aimed at evaluating the effect of swimming before and during pregnancy on rats born with intrauterine growth restriction (IUGR) and their offspring. For this, nondiabetic and streptozotocin-induced severely diabetic (SD) pregnant rats were mated and generated offspring with appropriate (control, C) and small (IUGR) for pregnancy age, respectively. Following that, C and IUGR groups were further distributed into nonexercised control (C), exercised control (Cex), nonexercised IUGR (IUGR), and exercised IUGR (IUGRex). IUGR rats presented lower mating rate than control rats. Regardless of physical exercise IUGR rats presented decreased body weight from birth to lactation. At 90 days of life, IUGR rats presented glucose intolerance. Maternal organ weights were increased and relative adiposity of IUGRex rats was lower than Cex. IUGR and IUGRex offspring presented reduced body weight than C and Cex, respectively. IUGRex dams presented an increased rate of appropriate for pregnancy age newborns. IUGEex male and female offspring relative brain weight was increased compared with Cex. Therefore, swimming before and during pregnancy prevented glucose intolerance, reduced general adiposity, and increased maternal and offspring organ weight in rats, showing the benefit of physical exercise for IUGR rats.