Effects of age and body mass on development of diving capabilities of gray seal pups: costs and benefits of the postweaning fast

Development of adequate diving capabilities is crucial for survival of seal pups and may depend on age and body size. We tracked the diving behavior of 20 gray seal pups during their first 3 mo at sea using satellite relay data loggers. We employed quantile analysis to track upper limits of dive duration and percentage time spent diving, and lower limits of surface intervals. When pups first left the breeding colony, extreme (ninety-fifth percentile) dive duration and percentage time spent diving were positively correlated with age, but not mass, at departure. Extreme dive durations and percentage time spent diving peaked at [Formula: see text] d of age at values comparable with those of adults, but were not sustained. Greater peaks in extreme percentage time spent diving occurred in pups that had higher initial values, were older at their peak, and were heavier at departure. Pups that were smaller and less capable divers when they left the colony improved extreme dive durations and percentage time spent diving more rapidly, once they were at sea. Minimum survival time correlated positively with departure mass. Pups that were heavier at weaning thus benefitted from being both larger and older at departure, but smaller pups faced a trade-off. While age at departure had a positive effect on early dive performance, departure mass impacted on peak percentage time spent diving and longer-term survival. We speculate that once small pups have attained a minimum degree of physiological development to support diving, they would benefit by leaving the colony when younger but larger to maximize limited fuel reserves, rather than undergoing further maturation on land away from potential food resources, because poor divers may be able to "catch up" once at sea.

Development and characterization of Poly(L-lactic acid) (PLLA) platforms for bone tissue engineering

The development of scaffolds based on biomaterials is a promising strategy for Tissue Engineering and cellular regeneration. This work focuses on Bone Tissue Engineering, the aim is to develop electrically tailored biomaterials with different crystalline and electric features, and study their impacts onto cell biological behavior, so as to predict the materials output in the enhancement of bone tissue regeneration. It is accepted that bone exhibits piezoelectricity, a property that has been proved to be involved in bone growth/repair mechanism regulation. In addition electrical stimulations have been proved to influence bone growth and repair. Piezoelectric materials are therefore widely investigated for a potential use in bone tissue engineering. The main goal is the development of novel strategies to produce and employ piezoelectric biomaterials, with detailed knowledge of mechanisms involved in cell-material interaction. In the current work, poly (L-lactic) acid (PLLA), a synthetic semi-crystalline polymer, exhibiting biodegradibility, biocompatibility and piezoelectricity is studied and proposed as a promoter of enhanced tissue regeneration. PLLA has already been approved for implantation in human body by the Food and Drug Administration (FDA), and at the moment it is being used in several clinical strategies. The present study consists of first preparing films with different degrees of crystallinity and characterizing these PLLA films, in terms of surface and structural properties, and subsequently assessing the behavior of cells in terms of viability, proliferation, morphology and mineralization for each PLLA configuration. PLLA films were prepared using the solvent cast technique and submitted to different thermal treatments in order to obtain different degrees of crystallinity. Those platforms were then electrically poled, positively and negatively, by corona discharge in order to tailor their electrical properties. The cellular assays were conducted by using two different osteoblast cell lines grown directly onto the PLLA films:Human osteoblast Hob, a primary cell culture and Human osteosarcoma MG-63 cell line. This thesis gives also a comprehensive introduction to the area of Bone Tissue Engineering and provides a review of the work done in this field in the past until today, in that same field, including the one related with bone’s piezoelectricity. Then the experimental part deals with the effects of the crystallinity degrees and of the polarization in terms of surface properties and cellular bio assays. Three different degrees of crystallinity, and three different polarization conditions were prepared; which results in 9 different configurations under investigation.

New tools for cognitive and motor rehabilitation: development and clinical validation

Nervous system disorders are associated with cognitive and motor deficits, and are responsible for the highest disability rates and global burden of disease. Their recovery paths are vulnerable and dependent on the effective combination of plastic brain tissue properties, with complex, lengthy and expensive neurorehabilitation programs. This work explores two lines of research, envisioning sustainable solutions to improve treatment of cognitive and motor deficits. Both projects were developed in parallel and shared a new sensible approach, where low-cost technologies were integrated with common clinical operative procedures. The aim was to achieve more intensive treatments under specialized monitoring, improve clinical decision-making and increase access to healthcare. The first project (articles I – III) concerned the development and evaluation of a web-based cognitive training platform (COGWEB), suitable for intensive use, either at home or at institutions, and across a wide spectrum of ages and diseases that impair cognitive functioning. It was tested for usability in a memory clinic setting and implemented in a collaborative network, comprising 41 centers and 60 professionals. An adherence and intensity study revealed a compliance of 82.8% at six months and an average of six hours/week of continued online cognitive training activities. The second project (articles IV – VI) was designed to create and validate an intelligent rehabilitation device to administer proprioceptive stimuli on the hemiparetic side of stroke patients while performing ambulatory movement characterization (SWORD). Targeted vibratory stimulation was found to be well tolerated and an automatic motor characterization system retrieved results comparable to the first items of the Wolf Motor Function Test. The global system was tested in a randomized placebo controlled trial to assess its impact on a common motor rehabilitation task in a relevant clinical environment (early post-stroke). The number of correct movements on a hand-to-mouth task was increased by an average of 7.2/minute while the probability to perform an error decreased from 1:3 to 1:9. Neurorehabilitation and neuroplasticity are shifting to more neuroscience driven approaches. Simultaneously, their final utility for patients and society is largely dependent on the development of more effective technologies that facilitate the dissemination of knowledge produced during the process. The results attained through this work represent a step forward in that direction. Their impact on the quality of rehabilitation services and public health is discussed according to clinical, technological and organizational perspectives. Such a process of thinking and oriented speculation has led to the debate of subsequent hypotheses, already being explored in novel research paths.

Childhood Attention Problems and the Development of Comorbid Symptoms at the Transition to High School: The Mediating Role of Parent and Peer Relationships

Children with Attention-Deficit/Hyperactivity Disorder (ADHD) are at increased risk for the development of depression and delinquent behavior. Children and adolescents with ADHD also experience difficulty creating/maintaining high quality friendships and parent-child relationships, and these difficulties may contribute to the development of co-morbid internalizing and externalizing symptoms in adolescence. However, there is limited research examining whether high quality friendships and parent-child relationships mediate the relation between ADHD and the emergence of these co-morbid symptoms at the transition to high school. This study examines the mediating role of relationship quality in the association between ADHD and depressive symptoms/delinquent behaviors at this developmentally significant transition point. Results revealed significant indirect effects of grade 6 attention problems on grade 9 depressive symptoms through friendship quality and quality of the mother-child relationship in grade 8. Interventions targeting parent and peer relationships may be valuable for youth with ADHD to promote successful transitions to high school.

Audio games: investigation of the potential through prototype development

This article discusses the potential of audio games based on the evaluation of three projects: a story-driven audio role-playing game (RPG), an interactive audiobook with RPG elements, and a set of casual sound-based games. The potential is understood, both in popularity and playability terms. The first factor is connected to the degree of players’ interest, while the second one to the degree of their engagement in sound-based game worlds. Although presented projects are embedded within the landscape of past and contemporary audio games and gaming platforms, the authors reach into the near future, concluding with possible development directions for this non-visual interactive entertainment.

Shock Train/Boundary-Layer Interaction in Rectangular Scramjet Isolators

Numerous studies of the dual-mode scramjet isolator, a critical component in preventing inlet unstart and/or vehicle loss by containing a collection of flow disturbances called a shock train, have been performed since the dual-mode propulsion cycle was introduced in the 1960s. Low momentum corner flow and other three-dimensional effects inherent to rectangular isolators have, however, been largely ignored in experimental studies of the boundary layer separation driven isolator shock train dynamics. Furthermore, the use of two dimensional diagnostic techniques in past works, be it single-perspective line-of-sight schlieren/shadowgraphy or single axis wall pressure measurements, have been unable to resolve the three-dimensional flow features inside the rectangular isolator. These flow characteristics need to be thoroughly understood if robust dual-mode scramjet designs are to be fielded. The work presented in this thesis is focused on experimentally analyzing shock train/boundary layer interactions from multiple perspectives in aspect ratio 1.0, 3.0, and 6.0 rectangular isolators with inflow Mach numbers ranging from 2.4 to 2.7. Secondary steady-state Computational Fluid Dynamics studies are performed to compare to the experimental results and to provide additional perspectives of the flow field. Specific issues that remain unresolved after decades of isolator shock train studies that are addressed in this work include the three-dimensional formation of the isolator shock train front, the spatial and temporal low momentum corner flow separation scales, the transient behavior of shock train/boundary layer interaction at specific coordinates along the isolator's lateral axis, and effects of the rectangular geometry on semi-empirical relations for shock train length prediction. A novel multiplane shadowgraph technique is developed to resolve the structure of the shock train along both the minor and major duct axis simultaneously. It is shown that the shock train front is of a hybrid oblique/normal nature. Initial low momentum corner flow separation spawns the formation of oblique shock planes which interact and proceed toward the center flow region, becoming more normal in the process. The hybrid structure becomes more two-dimensional as aspect ratio is increased but corner flow separation precedes center flow separation on the order of 1 duct height for all aspect ratios considered. Additional instantaneous oil flow surface visualization shows the symmetry of the three-dimensional shock train front around the lower wall centerline. Quantitative synthetic schlieren visualization shows the density gradient magnitude approximately double between the corner oblique and center flow normal structures. Fast response pressure measurements acquired near the corner region of the duct show preliminary separation in the outer regions preceding centerline separation on the order of 2 seconds. Non-intrusive Focusing Schlieren Deflectometry Velocimeter measurements reveal that both shock train oscillation frequency and velocity component decrease as measurements are taken away from centerline and towards the side-wall region, along with confirming the more two dimensional shock train front approximation for higher aspect ratios. An updated modification to Waltrup \& Billig's original semi-empirical shock train length relation for circular ducts based on centerline pressure measurements is introduced to account for rectangular isolator aspect ratio, upstream corner separation length scale, and major- and minor-axis boundary layer momentum thickness asymmetry. The latter is derived both experimentally and computationally and it is shown that the major-axis (side-wall) boundary layer has lower momentum thickness compared to the minor-axis (nozzle bounded) boundary layer, making it more separable. Furthermore, it is shown that the updated correlation drastically improves shock train length prediction capabilities in higher aspect ratio isolators. This thesis suggests that performance analysis of rectangular confined supersonic flow fields can no longer be based on observations and measurements obtained along a single axis alone. Knowledge gained by the work performed in this study will allow for the development of more robust shock train leading edge detection techniques and isolator designs which can greatly mitigate the risk of inlet unstart and/or vehicle loss in flight.

Between Bacchus and Dionysus: European Union policies on rural development: the cases of Nemea and Basto wine regions

A actividade vitivinícola possui um conjunto diverso de características presentes no solo, território e comunidade que fazem parte do património cultural de uma determinada região. Quando a tradição se traduz num conceito como terroir que é formado por características territoriais, sociais e culturais de uma região rural, o vinho apresenta uma “assinatura” que se escreve “naturalmente” no paladar regionalmente identificado. Os vinhos da Região de Nemea, na Grécia e de Basto (Região dos Vinhos Verdes) em Portugal, estão ambos sob a proteção dos regulamentos das Denominações de Origem. No entanto, apesar de ambos serem regulados por sistemas institucionais de certificação e controlo de qualidade, afigura-se a necessidade de questionar se o património cultural e a identidade territorial específica, “impressa” em ambos os terroirs, pode ser protegida num sentido mais abrangente do que apenas origem e qualidade. Em Nemea, a discussão entre os produtores diz respeito ao estabelecimento de sub-zonas, isto é incluir na regulação PDO uma diferente categorização territorial com base no terroir. Ou seja, para além de estar presente no rótulo a designação PDO, as garrafas incluirão ainda informação certificada sobre a área específica (dentro do mesmo terroir) onde o vinho foi produzido. A acontecer resultaria em diferentes status de qualidade de acordo com as diferentes aldeias de Nemea onde as vinhas estão localizadas. O que teria possíveis impactos no valor das propriedades e no uso dos solos. Para além disso, a não participação da Cooperativa de Nemea na SON (a associação local de produtores de vinho) e como tal na discussão principal sobre as mudanças e os desafios sobre o terroir de Nemea constitui um problema no sector vitivinícola de Nemea. Em primeiro lugar estabelece uma relação de não-comunicação entre os dois mais importantes agentes desse sector – as companhias vinícolas e a Cooperativa. Em segundo lugar porque constituiu uma possibilidade real, não só para os viticultores ficarem arredados dessa discussão, como também (porque não representados pela cooperativa) ficar impossibilitado um consenso sobre as mudanças discutidas. Isto poderá criar um ‘clima’ de desconfiança levando a discussão para ‘arenas’ deslocalizadas e como tal para decisões ‘desterritorializadas’ Em Basto, há vários produtores que começaram a vender a sua produção para distribuidoras localizadas externamente à sub-região de Basto, mas dentro da Região dos Vinhos Verdes, uma vez que essas companhias tem um melhor estatuto nacional e internacional e uma melhor rede de exportações. Isto está ainda relacionado com uma competição por uma melhor rede de contactos e status mais forte, tornando as discussões sobre estratégias comuns para o desenvolvimento rural e regional de Basto mais difícil de acontecer (sobre isto a palavra impossível foi constantemente usada durante as entrevistas com os produtores de vinho). A relação predominante entre produtores é caracterizada por relações individualistas. Contudo foi observado que essas posições são ainda caracterizadas por uma desconfiança no interior da rede interprofissional local: conflitos para conseguir os mesmos potenciais clientes; comprar uvas a viticultores com melhor rácio qualidade/preço; estratégias individuais para conseguir um melhor status político na relação com a Comissão dos Vinhos Verdes. Para além disso a inexistência de uma activa intermediação institucional (autoridades municipais e a Comissão de Vinho Verde), a inexistência entre os produtores de Basto de uma associação ou mesmo a inexistência de uma cooperativa local tem levado a região de Basto a uma posição de subpromoção nas estratégias de promoção do Vinho Verde em comparação com outras sub-regiões. É também evidente pelos resultados que as mudanças no sector vitivinícolas na região de Basto têm sido estimuladas de fora da região (em resposta também às necessidades dos mercados internacionais) e raramente de dentro – mais uma vez, ‘arenas’ não localizadas e como tal decisões desterritorializadas. Nesse sentido, toda essa discussão e planeamento estratégico, terão um papel vital na preservação da identidade localizada do terroir perante os riscos de descaracterização e desterritorialização. Em suma, para ambos os casos, um dos maiores desafios parece ser como preservar o terroir vitivinícola e como tal o seu carácter e identidade local, quando a rede interprofissional em ambas as regiões se caracteriza, tanto por relações não-consensuais em Nemea como pelo modus operandi de isolamento sem comunicação em Basto. Como tal há uma necessidade de envolvimento entre os diversos agentes e as autoridades locais no sentido de uma rede localizada de governança. Assim sendo, em ambas as regiões, a existência dessa rede é essencial para prevenir os efeitos negativos na identidade do produto e na sua produção. Uma estratégia de planeamento integrado para o sector será vital para preservar essa identidade, prevenindo a sua desterritorialização através de uma restruturação do conhecimento tradicional em simultâneo com a democratização do acesso ao conhecimento das técnicas modernas de produção vitivinícola.

Meeting on Provisions in Licensing Incorporating new developments in daily licensing practice: Setting conditions for open access, patron driven access, and data & text mining

Following the workshop on new developments in daily licensing practice in November 2011, we brought together fourteen representatives from national consortia (from Denmark, Germany, Netherlands and the UK) and publishers (Elsevier, SAGE and Springer) met in Copenhagen on 9 March 2012 to discuss provisions in licences to accommodate new developments. The one day workshop aimed to: present background and ideas regarding the provisions KE Licensing Expert Group developed; introduce and explain the provisions the invited publishers currently use;ascertain agreement on the wording for long term preservation, continuous access and course packs; give insight and more clarity about the use of open access provisions in licences; discuss a roadmap for inclusion of the provisions in the publishers’ licences; result in report to disseminate the outcome of the meeting. Participants of the workshop were: United Kingdom: Lorraine Estelle (Jisc Collections) Denmark: Lotte Eivor Jørgensen (DEFF), Lone Madsen (Southern University of Denmark), Anne Sandfær (DEFF/Knowledge Exchange) Germany: Hildegard Schaeffler (Bavarian State Library), Markus Brammer (TIB) The Netherlands: Wilma Mossink (SURF), Nol Verhagen (University of Amsterdam), Marc Dupuis (SURF/Knowledge Exchange) Publishers: Alicia Wise (Elsevier), Yvonne Campfens (Springer), Bettina Goerner (Springer), Leo Walford (Sage) Knowledge Exchange: Keith Russell The main outcome of the workshop was that it would be valuable to have a standard set of clauses which could used in negotiations, this would make concluding licences a lot easier and more efficient. The comments on the model provisions the Licensing Expert group had drafted will be taken into account and the provisions will be reformulated. Data and text mining is a new development and demand for access to allow for this is growing. It would be easier if there was a simpler way to access materials so they could be more easily mined. However there are still outstanding questions on how authors of articles that have been mined can be properly attributed.

FRAMEWORK SYNTHESIS FOR SYMBOLIC EXECUTION OF EVENT-DRIVEN FRAMEWORKS

Symbolic execution is a powerful program analysis technique, but it is very challenging to apply to programs built using event-driven frameworks, such as Android. The main reason is that the framework code itself is too complex to symbolically execute. The standard solution is to manually create a framework model that is simpler and more amenable to symbolic execution. However, developing and maintaining such a model by hand is difficult and error-prone. We claim that we can leverage program synthesis to introduce a high-degree of automation to the process of framework modeling. To support this thesis, we present three pieces of work. First, we introduced SymDroid, a symbolic executor for Android. While Android apps are written in Java, they are compiled to Dalvik bytecode format. Instead of analyzing an app’s Java source, which may not be available, or decompiling from Dalvik back to Java, which requires significant engineering effort and introduces yet another source of potential bugs in an analysis, SymDroid works directly on Dalvik bytecode. Second, we introduced Pasket, a new system that takes a first step toward automatically generating Java framework models to support symbolic execution. Pasket takes as input the framework API and tutorial programs that exercise the framework. From these artifacts and Pasket's internal knowledge of design patterns, Pasket synthesizes an executable framework model by instantiating design patterns, such that the behavior of a synthesized model on the tutorial programs matches that of the original framework. Lastly, in order to scale program synthesis to framework models, we devised adaptive concretization, a novel program synthesis algorithm that combines the best of the two major synthesis strategies: symbolic search, i.e., using SAT or SMT solvers, and explicit search, e.g., stochastic enumeration of possible solutions. Adaptive concretization parallelizes multiple sub-synthesis problems by partially concretizing highly influential unknowns in the original synthesis problem. Thanks to adaptive concretization, Pasket can generate a large-scale model, e.g., thousands lines of code. In addition, we have used an Android model synthesized by Pasket and found that the model is sufficient to allow SymDroid to execute a range of apps.

Development of ultra-high-performance concrete (UHPC) using waste glass materials ─ towards innovative eco-friendly concrete

Le béton conventionnel (BC) a de nombreux problèmes tels que la corrosion de l’acier d'armature et les faibles résistances des constructions en béton. Par conséquent, la plupart des structures fabriquées avec du BC exigent une maintenance fréquent. Le béton fibré à ultra-hautes performances (BFUP) peut être conçu pour éliminer certaines des faiblesses caractéristiques du BC. Le BFUP est défini à travers le monde comme un béton ayant des propriétés mécaniques, de ductilité et de durabilité supérieures. Le BFUP classique comprend entre 800 kg/m³ et 1000 kg/m³ de ciment, de 25 à 35% massique (%m) de fumée de silice (FS), de 0 à 40%m de poudre de quartz (PQ) et 110-140%m de sable de quartz (SQ) (les pourcentages massiques sont basés sur la masse totale en ciment des mélanges). Le BFUP contient des fibres d'acier pour améliorer sa ductilité et sa résistance aux efforts de traction. Les quantités importantes de ciment utilisées pour produire un BFUP affectent non seulement les coûts de production et la consommation de ressources naturelles comme le calcaire, l'argile, le charbon et l'énergie électrique, mais affectent également négativement les dommages sur l'environnement en raison de la production substantielle de gaz à effet de serre dont le gas carbonique (CO[indice inférieur 2]). Par ailleurs, la distribution granulométrique du ciment présente des vides microscopiques qui peuvent être remplis avec des matières plus fines telles que la FS. Par contre, une grande quantité de FS est nécessaire pour combler ces vides uniquement avec de la FS (25 à 30%m du ciment) ce qui engendre des coûts élevés puisqu’il s’agit d’une ressource limitée. Aussi, la FS diminue de manière significative l’ouvrabilité des BFUP en raison de sa surface spécifique Blaine élevée. L’utilisation du PQ et du SQ est également coûteuse et consomme des ressources naturelles importantes. D’ailleurs, les PQ et SQ sont considérés comme des obstacles pour l’utilisation des BFUP à grande échelle dans le marché du béton, car ils ne parviennent pas à satisfaire les exigences environnementales. D’ailleurs, un rapport d'Environnement Canada stipule que le quartz provoque des dommages environnementaux immédiats et à long terme en raison de son effet biologique. Le BFUP est généralement vendu sur le marché comme un produit préemballé, ce qui limite les modifications de conception par l'utilisateur. Il est normalement transporté sur de longues distances, contrairement aux composantes des BC. Ceci contribue également à la génération de gaz à effet de serre et conduit à un coût plus élevé du produit final. Par conséquent, il existe le besoin de développer d’autres matériaux disponibles localement ayant des fonctions similaires pour remplacer partiellement ou totalement la fumée de silice, le sable de quartz ou la poudre de quartz, et donc de réduire la teneur en ciment dans BFUP, tout en ayant des propriétés comparables ou meilleures. De grandes quantités de déchets verre ne peuvent pas être recyclées en raison de leur fragilité, de leur couleur, ou des coûts élevés de recyclage. La plupart des déchets de verre vont dans les sites d'enfouissement, ce qui est indésirable puisqu’il s’agit d’un matériau non biodégradable et donc moins respectueux de l'environnement. Au cours des dernières années, des études ont été réalisées afin d’utiliser des déchets de verre comme ajout cimentaire alternatif (ACA) ou comme granulats ultrafins dans le béton, en fonction de la distribution granulométrique et de la composition chimique de ceux-ci. Cette thèse présente un nouveau type de béton écologique à base de déchets de verre à ultra-hautes performances (BEVUP) développé à l'Université de Sherbrooke. Les bétons ont été conçus à l’aide de déchets verre de particules de tailles variées et de l’optimisation granulaire de la des matrices granulaires et cimentaires. Les BEVUP peuvent être conçus avec une quantité réduite de ciment (400 à 800 kg/m³), de FS (50 à 220 kg/m³), de PQ (0 à 400 kg/m³), et de SQ (0-1200 kg/m³), tout en intégrant divers produits de déchets de verre: du sable de verre (SV) (0-1200 kg/m³) ayant un diamètre moyen (d[indice inférieur 50]) de 275 µm, une grande quantité de poudre de verre (PV) (200-700 kg/m³) ayant un d50 de 11 µm, une teneur modérée de poudre de verre fine (PVF) (50-200 kg/m³) avec d[indice inférieur] 50 de 3,8 µm. Le BEVUP contient également des fibres d'acier (pour augmenter la résistance à la traction et améliorer la ductilité), du superplastifiants (10-60 kg/m³) ainsi qu’un rapport eau-liant (E/L) aussi bas que celui de BFUP. Le remplacement du ciment et des particules de FS avec des particules de verre non-absorbantes et lisse améliore la rhéologie des BEVUP. De plus, l’utilisation de la PVF en remplacement de la FS réduit la surface spécifique totale nette d’un mélange de FS et de PVF. Puisque la surface spécifique nette des particules diminue, la quantité d’eau nécessaire pour lubrifier les surfaces des particules est moindre, ce qui permet d’obtenir un affaissement supérieur pour un même E/L. Aussi, l'utilisation de déchets de verre dans le béton abaisse la chaleur cumulative d'hydratation, ce qui contribue à minimiser le retrait de fissuration potentiel. En fonction de la composition des BEVUP et de la température de cure, ce type de béton peut atteindre des résistances à la compression allant de 130 à 230 MPa, des résistances à la flexion supérieures à 20 MPa, des résistances à la traction supérieure à 10 MPa et un module d'élasticité supérieur à 40 GPa. Les performances mécaniques de BEVUP sont améliorées grâce à la réactivité du verre amorphe, à l'optimisation granulométrique et la densification des mélanges. Les produits de déchets de verre dans les BEVUP ont un comportement pouzzolanique et réagissent avec la portlandite générée par l'hydratation du ciment. Cependant, ceci n’est pas le cas avec le sable de quartz ni la poudre de quartz dans le BFUP classique, qui réagissent à la température élevée de 400 °C. L'addition des déchets de verre améliore la densification de l'interface entre les particules. Les particules de déchets de verre ont une grande rigidité, ce qui augmente le module d'élasticité du béton. Le BEVUP a également une très bonne durabilité. Sa porosité capillaire est très faible, et le matériau est extrêmement résistant à la pénétration d’ions chlorure (≈ 8 coulombs). Sa résistance à l'abrasion (indice de pertes volumiques) est inférieure à 1,3. Le BEVUP ne subit pratiquement aucune détérioration aux cycles de gel-dégel, même après 1000 cycles. Après une évaluation des BEVUP en laboratoire, une mise à l'échelle a été réalisée avec un malaxeur de béton industriel et une validation en chantier avec de la construction de deux passerelles. Les propriétés mécaniques supérieures des BEVUP a permis de concevoir les passerelles avec des sections réduites d’environ de 60% par rapport aux sections faites de BC. Le BEVUP offre plusieurs avantages économiques et environnementaux. Il réduit le coût de production et l’empreinte carbone des structures construites de béton fibré à ultra-hautes performances (BFUP) classique, en utilisant des matériaux disponibles localement. Il réduit les émissions de CO[indice inférieur 2] associées à la production de clinkers de ciment (50% de remplacement du ciment) et utilise efficacement les ressources naturelles. De plus, la production de BEVUP permet de réduire les quantités de déchets de verre stockés ou mis en décharge qui causent des problèmes environnementaux et pourrait permettre de sauver des millions de dollars qui pourraient être dépensés dans le traitement de ces déchets. Enfin, il offre une solution alternative aux entreprises de construction dans la production de BFUP à moindre coût.

DATA DRIVEN APPROACHES TO IDENTIFY DETERMINANTS OF HEART DISEASES AND CANCER RESISTANCE

Cancer and cardio-vascular diseases are the leading causes of death world-wide. Caused by systemic genetic and molecular disruptions in cells, these disorders are the manifestation of profound disturbance of normal cellular homeostasis. People suffering or at high risk for these disorders need early diagnosis and personalized therapeutic intervention. Successful implementation of such clinical measures can significantly improve global health. However, development of effective therapies is hindered by the challenges in identifying genetic and molecular determinants of the onset of diseases; and in cases where therapies already exist, the main challenge is to identify molecular determinants that drive resistance to the therapies. Due to the progress in sequencing technologies, the access to a large genome-wide biological data is now extended far beyond few experimental labs to the global research community. The unprecedented availability of the data has revolutionized the capabilities of computational researchers, enabling them to collaboratively address the long standing problems from many different perspectives. Likewise, this thesis tackles the two main public health related challenges using data driven approaches. Numerous association studies have been proposed to identify genomic variants that determine disease. However, their clinical utility remains limited due to their inability to distinguish causal variants from associated variants. In the presented thesis, we first propose a simple scheme that improves association studies in supervised fashion and has shown its applicability in identifying genomic regulatory variants associated with hypertension. Next, we propose a coupled Bayesian regression approach -- eQTeL, which leverages epigenetic data to estimate regulatory and gene interaction potential, and identifies combinations of regulatory genomic variants that explain the gene expression variance. On human heart data, eQTeL not only explains a significantly greater proportion of expression variance in samples, but also predicts gene expression more accurately than other methods. We demonstrate that eQTeL accurately detects causal regulatory SNPs by simulation, particularly those with small effect sizes. Using various functional data, we show that SNPs detected by eQTeL are enriched for allele-specific protein binding and histone modifications, which potentially disrupt binding of core cardiac transcription factors and are spatially proximal to their target. eQTeL SNPs capture a substantial proportion of genetic determinants of expression variance and we estimate that 58% of these SNPs are putatively causal. The challenge of identifying molecular determinants of cancer resistance so far could only be dealt with labor intensive and costly experimental studies, and in case of experimental drugs such studies are infeasible. Here we take a fundamentally different data driven approach to understand the evolving landscape of emerging resistance. We introduce a novel class of genetic interactions termed synthetic rescues (SR) in cancer, which denotes a functional interaction between two genes where a change in the activity of one vulnerable gene (which may be a target of a cancer drug) is lethal, but subsequently altered activity of its partner rescuer gene restores cell viability. Next we describe a comprehensive computational framework --termed INCISOR-- for identifying SR underlying cancer resistance. Applying INCISOR to mine The Cancer Genome Atlas (TCGA), a large collection of cancer patient data, we identified the first pan-cancer SR networks, composed of interactions common to many cancer types. We experimentally test and validate a subset of these interactions involving the master regulator gene mTOR. We find that rescuer genes become increasingly activated as breast cancer progresses, testifying to pervasive ongoing rescue processes. We show that SRs can be utilized to successfully predict patients' survival and response to the majority of current cancer drugs, and importantly, for predicting the emergence of drug resistance from the initial tumor biopsy. Our analysis suggests a potential new strategy for enhancing the effectiveness of existing cancer therapies by targeting their rescuer genes to counteract resistance. The thesis provides statistical frameworks that can harness ever increasing high throughput genomic data to address challenges in determining the molecular underpinnings of hypertension, cardiovascular disease and cancer resistance. We discover novel molecular mechanistic insights that will advance the progress in early disease prevention and personalized therapeutics. Our analyses sheds light on the fundamental biological understanding of gene regulation and interaction, and opens up exciting avenues of translational applications in risk prediction and therapeutics.

Shape and chemically anisotropic colloidal particles: A theoretical study of their structure, phase behavior, and slow dynamics

A detailed non-equilibrium state diagram of shape-anisotropic particle fluids is constructed. The effects of particle shape are explored using Naive Mode Coupling Theory (NMCT), and a single particle Non-linear Langevin Equation (NLE) theory. The dynamical behavior of non-ergodic fluids are discussed. We employ a rotationally frozen approach to NMCT in order to determine a transition to center of mass (translational) localization. Both ideal and kinetic glass transitions are found to be highly shape dependent, and uniformly increase with particle dimensionality. The glass transition volume fraction of quasi 1- and 2- dimensional particles fall monotonically with the number of sites (aspect ratio), while 3-dimensional particles display a non-monotonic dependence of glassy vitrification on the number of sites. Introducing interparticle attractions results in a far more complex state diagram. The ideal non-ergodic boundary shows a glass-fluid-gel re-entrance previously predicted for spherical particle fluids. The non-ergodic region of the state diagram presents qualitatively different dynamics in different regimes. They are qualified by the different behaviors of the NLE dynamic free energy. The caging dominated, repulsive glass regime is characterized by long localization lengths and barrier locations, dictated by repulsive hard core interactions, while the bonding dominated gel region has short localization lengths (commensurate with the attraction range), and barrier locations. There exists a small region of the state diagram which is qualified by both glassy and gel localization lengths in the dynamic free energy. A much larger (high volume fraction, and high attraction strength) region of phase space is characterized by short gel-like localization lengths, and long barrier locations. The region is called the attractive glass and represents a 2-step relaxation process whereby a particle first breaks attractive physical bonds, and then escapes its topological cage. The dynamic fragility of fluids are highly particle shape dependent. It increases with particle dimensionality and falls with aspect ratio for quasi 1- and 2- dimentional particles. An ultralocal limit analysis of the NLE theory predicts universalities in the behavior of relaxation times, and elastic moduli. The equlibrium phase diagram of chemically anisotropic Janus spheres and Janus rods are calculated employing a mean field Random Phase Approximation. The calculations for Janus rods are corroborated by the full liquid state Reference Interaction Site Model theory. The Janus particles consist of attractive and repulsive regions. Both rods and spheres display rich phase behavior. The phase diagrams of these systems display fluid, macrophase separated, attraction driven microphase separated, repulsion driven microphase separated and crystalline regimes. Macrophase separation is predicted in highly attractive low volume fraction systems. Attraction driven microphase separation is charaterized by long length scale divergences, where the ordering length scale determines the microphase ordered structures. The ordering length scale of repulsion driven microphase separation is determined by the repulsive range. At the high volume fractions, particles forgo the enthalpic considerations of attractions and repulsions to satisfy hard core constraints and maximize vibrational entropy. This results in site length scale ordering in rods, and the sphere length scale ordering in Janus spheres, i.e., crystallization. A change in the Janus balance of both rods and spheres results in quantitative changes in spinodal temperatures and the position of phase boundaries. However, a change in the block sequence of Janus rods causes qualitative changes in the type of microphase ordered state, and induces prominent features (such as the Lifshitz point) in the phase diagrams of these systems. A detailed study of the number of nearest neighbors in Janus rod systems reflect a deep connection between this local measure of structure, and the structure factor which represents the most global measure of order.

Customer involvement in new service development

This case study aims at filling the research gap in the literature, by researching how customers experience customer involvement in new service development, in addition to giving insight on what are the organisational customers’ motivations to become involved in service development. These subjects are studied by conducting three interviews. The thesis gives a review of previous findings regarding customer-driven new service development, customer involvement, customer roles, modes of involvement, communication in the involvement process, what is the role of customer engagement and what are the motivational drivers for customers. The thesis also explains what new service development is and makes a distinction between new service development and new service design. The results revealed that organisational customers want to be involved throughout the development process, with active involvement in the beginning and end phases. Moreover, customers prefer face-to-face methods and active and bidirectional communication throughout the process. The findings propose seven motivational factors, a new framework for customer-driven new service development and communication process map. The managerial implications list five themes for service providers to take into consideration when involving customers to the service development process.

Global change and climate-driven invasion of the Pacific oyster (Crassostrea gigas) along European coasts: a bioenergetics modelling approach

Aim The spread of non-indigenous species in marine ecosystems world-wide is one of today's most serious environmental concerns. Using mechanistic modelling, we investigated how global change relates to the invasion of European coasts by a non-native marine invertebrate, the Pacific oyster Crassostrea gigas. Location Bourgneuf Bay on the French Atlantic coast was considered as the northern boundary of C. gigas expansion at the time of its introduction to Europe in the 1970s. From this latitudinal reference, variations in the spatial distribution of the C. gigas reproductive niche were analysed along the north-western European coast from Gibraltar to Norway. Methods The effects of environmental variations on C. gigas physiology and phenology were studied using a bioenergetics model based on Dynamic Energy Budget theory. The model was forced with environmental time series including in situ phytoplankton data, and satellite data of sea surface temperature and suspended particulate matter concentration. Results Simulation outputs were successfully validated against in situ oyster growth data. In Bourgneuf Bay, the rise in seawater temperature and phytoplankton concentration has increased C. gigas reproductive effort and led to precocious spawning periods since the 1960s. At the European scale, seawater temperature increase caused a drastic northward shift (1400 km within 30 years) in the C. gigas reproductive niche and optimal thermal conditions for early life stage development. Main conclusions We demonstrated that the poleward expansion of the invasive species C. gigas is related to global warming and increase in phytoplankton abundance. The combination of mechanistic bioenergetics modelling with in situ and satellite environmental data is a valuable framework for ecosystem studies. It offers a generic approach to analyse historical geographical shifts and to predict the biogeographical changes expected to occur in a climate-changing world.

Training civic bridge builders: Outcomes of community leadership development programs

As rural communities experience rapid economic, demographic, and political change, program interventions that focus on the development of community leadership capacity could be valuable. Community leadership development programs have been deployed in rural U.S. communities for the past 30 years by university extension units, chambers of commerce, and other nonprofit foundations. Prior research on program outcomes has largely focused on trainees’ self-reported change in individual leadership knowledge, skills, and attitudes. However, postindustrial leadership theories suggest that leadership in the community relies not on individuals but on social relationships that develop across groups akin to social bridging. The purpose of this study is to extend and strengthen prior evaluative research on community leadership development programs by examining program effects on opportunities to develop bridging social capital using more rigorous methods. Data from a quasi-experimental study of rural community leaders (n = 768) in six states are used to isolate unique program effects on individual changes in both cognitive and behavioral community leadership outcomes. Regression modeling shows that participation in community leadership development programs is associated with increased leadership development in knowledge, skills, attitudes, and behaviors that are a catalyst for social bridging. The community capitals framework is used to show that program participants are significantly more likely to broaden their span of involvement across community capital asset areas over time compared to non-participants. Data on specific program structure elements show that skills training may be important for cognitive outcomes while community development learning and group projects are important for changes in organizational behavior. Suggestions for community leadership program practitioners are presented.