Salient Pole Synchronous Machine Modelling in an Industrial Direct Torque Controlled Drive Application

Synchronous motors are used mainly in large drives, for example in ship propulsion systems and in steel factories' rolling mills because of their high efficiency, high overload capacity and good performance in the field weakening range. This, however, requires an extremely good torque control system. A fast torque response and a torque accuracy are basic requirements for such a drive. For large power, high dynamic performance drives the commonly known principle of field oriented vector control has been used solely hitherto, but nowadays it is not the only way to implement such a drive. A new control method Direct Torque Control (DTC) has also emerged. The performance of such a high quality torque control as DTC in dynamically demanding industrial applications is mainly based on the accurate estimate of the various flux linkages' space vectors. Nowadays industrial motor control systems are real time applications with restricted calculation capacity. At the same time the control system requires a simple, fast calculable and reasonably accurate motor model. In this work a method to handle these problems in a Direct Torque Controlled (DTC) salient pole synchronous motor drive is proposed. A motor model which combines the induction law based "voltage model" and motor inductance parameters based "current model" is presented. The voltage model operates as a main model and is calculated at a very fast sampling rate (for example 40 kHz). The stator flux linkage calculated via integration from the stator voltages is corrected using the stator flux linkage computed from the current model. The current model acts as a supervisor that prevents only the motor stator flux linkage from drifting erroneous during longer time intervals. At very low speeds the role of the current model is emphasised but, nevertheless, the voltage model always stays the main model. At higher speeds the function of the current model correction is to act as a stabiliser of the control system. The current model contains a set of inductance parameters which must be known. The validation of the current model in steady state is not self evident. It depends on the accuracy of the saturated value of the inductances. Parameter measurement of the motor model where the supply inverter is used as a measurement signal generator is presented. This so called identification run can be performed prior to delivery or during drive commissioning. A derivation method for the inductance models used for the representation of the saturation effects is proposed. The performance of the electrically excited synchronous motor supplied with the DTC inverter is proven with experimental results. It is shown that it is possible to obtain a good static accuracy of the DTC's torque controller for an electrically excited synchronous motor. The dynamic response is fast and a new operation point is achieved without oscillation. The operation is stable throughout the speed range. The modelling of the magnetising inductance saturation is essential and cross saturation has to be considered as well. The effect of cross saturation is very significant. A DTC inverter can be used as a measuring equipment and the parameters needed for the motor model can be defined by the inverter itself. The main advantage is that the parameters defined are measured in similar magnetic operation conditions and no disagreement between the parameters will exist. The inductance models generated are adequate to meet the requirements of dynamically demanding drives.

Change of Electricity Distribution Industry: Drivers and Opening Business Opportunities

As a result of the recent regulatory amendments and other development trends in the electricity distribution business, the sector is currently witnessing radical restructuring that will eventually impact the business logics of the sector. This report represents upcoming changes in the electricity distribution industry and concentrates on the factors that are expected to be the most fundamental ones. Electricity network companies nowadays struggle with legislative and regulatory requirements that focus on both the operational efficiency and the reliability of electricity distribution networks. The forces that have an impact on the distribution network companies can be put into three main categories that define the transformation at a general level. Those are: (1) a requirement for a more functional marketplace for energy, (2) environmental aspects (combating climate change etc.), and (3) a strongly emphasized requirement for the security of energy supply. The first point arises from the legislators’ attempt to increase competition in electricity retail markets, the second one concerns both environmental protection and human safety issues, and the third one indicates societies’ reduced willingness to accept interruptions in electricity supply. In the future, regulation of electricity distribution business may lower the threshold for building more weather-resistant networks, which in turn means increased underground cabling. This development pattern is reinforced by tightening safety and environmental regulations that ultimately make the overhead lines expensive to build and maintain. The changes will require new approaches particularly in network planning, construction, and maintenance. The concept for planning, constructing, and maintaining cable networks is necessary because the interdependencies between network operations are strong, in other words, the nature of the operation requires a linkage to other operations.

Biodiversidade flavonoídica e aspectos farmacológicos em espécies dos gêneros Ouratea e Luxemburgia (Ochnaceae)

This work describes the flavonoids and biflavonoids found in species of Ouratea and Luxemburgia as chemical markers that serve to detect the difference between these taxa according to the linkage between the flavonoidal units. A rational nomenclature is proposed and the pharmacological potencial is discussed.

Determinação teórica das conformações mais estáveis da trealose em solução aquosa

In this work the most abundant trehalose conformers for the isolated molecule as well as for the water solvated system are selected. The theoretical tecniques employed are ab initio calculations in the gas phase and in aqueous solution using the PCM model. A conformational map is built for the glycosidic angles (phi and psi) and the search for the most abundant structures is explained. The final structures are validated by the agreement found between experimental and theoretical values for ³J H,C along the glycosidic linkage.

The Importance of Semantics: Visual World Studies on Drawing Inferences and Resolving Anaphors

The present thesis investigated the importance of semantics in generating inferences during discourse processing. Three aspects of semantics, gender stereotypes, implicit causality information and proto-role properties, were used to investigate whether semantics is activated elaboratively during discourse comprehension and what its relative importance is in backward inferencing compared to discourse/structural cues. Visual world eye-tracking studies revealed that semantics plays an important role in both backward and forward inferencing: Gender stereotypes and implicit causality information is activated elaboratively during online discourse comprehension. Moreover, gender stereotypes, implicit causality and proto-role properties of verbs are all used in backward inferencing. Importantly, the studies demonstrated that semantic cues are weighed against discourse/structural cues. When the structural cues consist of a combination of cues that have been independently shown to be important in backward inferencing, semantic effects may be masked, whereas when the structural cues consist of a combination of fewer prominent cues, semantics can have an earlier effect than structural factors in pronoun resolution. In addition, the type of inference matters, too: During anaphoric inferencing semantics has a prominent role, while discourse/structural salience attains more prominence during non-anaphoric inferencing. Finally, semantics exhibits a strong role in inviting new inferences to revise earlier made inferences even in the case the additional inference is not needed to establish coherence in discourse. The findings are generally in line with the Mental Model approaches. Two extended model versions are presented that incorporate the current findings into the earlier literature. These models allow both forward and backward inferencing to occur at any given moment during the course of processing; they also allow semantic and discourse/structural cues to contribute to both of these processes. However, while the Mental Model 1 does not assume interactions between semantic and discourse/structural factors in forward inferencing, the Mental Model 2 does assume such a link.

Saako historiasta selvää? Monikulttuuriset yläkoululaiset historian lähteillä historian taidot motiivien, seurauksien, historian tulkintojen ja lähteiden luotettavuuden arvioinneissa

The research assesses the skills of upper comprehensive school pupils in history. The focus is on locating personal motives, assessing wider reasons hidden in historical sources and evaluating source reliability. The research also questions how a wide use of multiple sources affects pupils’ holistic understanding of historical phenomena. The participants were a multicultural group of pupils. The origins of their cultures can be traced to the Balkan, the Middle East, Asia and Europe. The number of native Finnish speakers and pupils speaking Finnish as their second language was almost equal. The multicultural composition provides opportunities to assess how culturally responsive learning history from sources is. The intercultural approach to learning in a multicultural setting emphasizes equality as a precondition for learning. In order to set assignments at least to some extent match with all participants only those answers were taken into account which were produced by pupils who had studied history for a similar period of time in the Finnish comprehensive school system. Due to the small number of participants (41), the study avoids wide generalizations. Nevertheless, possible cultural blueprints in pupils’ way of thinking are noted. The first test examined the skills of pupils to find motives for emigration. The results showed that for 7th graders finding reasons is not a problematic task. However, the number of reasons noticed and justifications varied. In addition, the way the pupils explained their choices was a distinguishing factor. Some pupils interpreted source material making use of previous knowledge on the issue, while other pupils based their analysis solely on the text handed and did not try to add their own knowledge. Answers were divided into three categories: historical, explanatory and stating. Historical answers combined smoothly previously learned historical knowledge to one’s own source analysis; explanatory answers often ignored a wider frame, although they were effective when explaining e.g. historical concepts. The stating answers only noticed motives from the sources and made no attempts to explain them historically. Was the first test culturally responsive? All pupils representing different cultures tackled the first source exam successfully, but there were some signs of how historical concepts are understood in a slightly different way if the pupil’s personal history has no linkage to the concepts under scrutiny. The second test focused on the history of Native Americans. The test first required pupils to recognize whether short source extracts (5) were written by Indians or Caucasians. Based on what they had already learned from North American history, the pupils did not find it hard to distinguish between the sources. The analysis of multiphase causes and consequences of the disputes between Native Americans and white Americans caused dispersion among pupils. Using two historical sources and combining historical knowledge from both of them simultaneously was cumbersome for many. The explanations of consequences can be divided into two groups: the ones emphasizing short term consequences and those placing emphasis on long term consequences. The short term approach was mainly followed by boys in every group. The girls mainly paid attention to long term consequences. The result suggests that historical knowledge in sources is at least to some extent read through role and gender lenses. The third test required pupils to explain in their own words how the three sources given differed in their account of living conditions in Nazi Germany, which turned out to be demanding for many pupils. The pupils’ stronghold was rather the assessment of source reliability and accounts why the sources approached the same events differently. All participants wrote critical and justified comments on reliability and aspects that might have affected the content of the sources. The pupils felt that the main reasons that affected source reliability were the authors’ ethnic background, nationality and profession. The assessment showed that pupils were well aware that position in a historical situation has an impact on historical accounts, but in certain cases the victim’s account was seen as a historical truth. The account of events by a historian was chosen most often as the most reliable source, but it was often justified leniently with an indication to professionalism rather than with clear ideas of how historians conduct accounts based on sources. In brief, the last source test demonstrates that pupils have a strong idea that the ethnicity or nationalism determines how people explained events of the past. It is also an implication that pupils understand how historical knowledge is interpretative. The results also imply that history can be analyzed from a neutral perspective. One’s own membership in an ethnical or religious group does not automatically mean that a person’s cultural identity excludes historical explanations if something in them contradicts with his or her identity. The second method of extracting knowledge of pupils’ historical thinking was an essay analysis. The analysis shows that an analytical account of complicated political issues, which often include a great number of complicated political concepts, leads more likely to an inconsistent structure in the written work of pupils. The material also demonstrates that pupils have a strong tendency to take a critical stance when assessing history. Historical empathy in particular is shown if history somehow has a linkage to young people, children or minorities. Some topics can also awake strong feelings, especially among pupils with emigrant background, if there is a linkage between one’s own personal history and that of the school; and occasionally a student’s historical experience or thoughts replaced school history. Using sources during history lessons at school seems to have many advantages. It enhances the reasoning skills of pupils and their skills to assess the nature of historical knowledge. Thus one of the main aims and a great benefit of source work is to encourage pupils to express their own ideas and opinions. To conclude, when assessing the skills of adolescents in history - their work with sources, comments on history, historical knowledge and finally their historical thinking - one should be cautious and avoid cut off score evaluations. One purpose of pursuing history with sources is to encourage pupils to think independently, which is a useful tool for further identity construction. The idea that pupils have the right to conduct their own interpretations of history can be partially understood as part of a wider learning process, justification to study history comes from extrinsic reasons. The intrinsic reason is history itself; in order to understand history one should have a basic understanding of history as a specific domain of knowledge. Using sources does not mean that knowing history is of secondary importance. Only a balance between knowing the contextual history, understanding basic key concepts and working with sources is a solid base to improve pupils’ historical understanding.

Improving Intraorganizational Knowledge Sharing

The objective of this research was to find how the critical factors enabling intraorganizational knowledge sharing could be implemented to be part of case organization’s actions. The theoretical framework of the research was constituted based on previous scientific discussions concerning knowledge and its dimensions, knowledge sharing and its linkage to organizational learning. The intraorganizational knowledge sharing critical factors form an essential part of the theoretical framework. The study was a qualitative case study. The data was collected using focus group interviews and analyzed using theme analysis. In the empirical part of the study case organizations characteristics to the intraorganizational knowledge sharing were researched, intraorganizational knowledge sharing goals were mapped and finally improvement actions were suggested. The most significant suggestions were creating an organization wide knowledge sharing strategy, facilitating the development of social networks and communicating the top management support for knowledge sharing activities.

Synthesis and biological activity of n-{5-(4-methylphenyl) diazenyl-4-phenyl-1, 3-thiazol-2-yl}benzamide derivatives

In the present study, various amides of 2-amino-5-(4-methylphenyl)-diazenyl-4-phenyl-1, 3-thiazole was synthesized and their biological activities were evaluated. All the synthesized compounds were characterized by the combination of elemental analysis and standard spectroscopic methods. They are screened for anti-bacterial activity against Escherichia coli and Staphylococcus aureus as well as screened for antifungal activity against Aspergillus niger and Apergillus oryzae by cup plate method at 1 µg/ mL concentration in DMF.

DERIVATIZACIÓN Y CARACTERIZACIÓN ESPECTROSCÓPICA DE UN BIOPOLÍMERO A BASE DE L -LISINA CON ANÁLOGOS DE LA D-BIOTINA: CO -POLI(L-LISINA)-GRAFT -(ε-N-[X-D -BIOTINIL]-L-LISINA)

We report the single-step derivatization reaction of a biopolymer based onL -lysine with D -biotin analogs:Co -poly(L -lysine)-graft-(ε-N -[X-D-biotinyl]-L -lysine) (PLL-X-Biotin). The valeric acid carboxylate of D -biotin is activated to an NHS ester for direct modification of amine groups in proteins and other macromolecules. NHS esters react by nucleophilic attack of an amine in the carbonyl group, releasing the NHS group, and forming a stable amide linkage. NHS-X-Biotin is the simplest biotinylation reagent commercially available. In contrast withD -biotin, it has a longer spacer arm off the valeric acid side chain allowing better binding potential for avidin or streptavidin probes. Derivatization of poly(L -lysine) (PLL) with NHS-X-Biotin led to a copolymer PLL-X-Biotin. UV-Visible, IR-FT and 1H NMR characteristics derived from synthesis are briefly discussed.

Utilization of Incident Reporting in The Finnish Maritime Industry

Marine traffic is expected to increase rapidly in the future, both in the Baltic Sea and in the Gulf of Finland. As the number of vessels in the area increases, so does the risk of serious marine accidents. To help prevent such accidents in the future, the International Maritime Organization (IMO) has put forth the International Safety Management Code (the ISM Code), which aims to improve the safety of the vessels. The second work package of the Development of maritime safety culture (METKU) project investigates the effects of the ISM Code and potential areas of improvement in maritime safety. The first phase in the work package used a literature review to determine how maritime safety culture could be improved. Continuous improvement, management commitment and personnel empowerment and motivation were found to be essential. In the second phase, shipping companies and administrators were interviewed. It was discovered that especially incident reporting based on continuous improvement was felt to be lacking. This third phase aims to take a closer look at incident reporting and suggest improvements based on the findings. Both the IMO and national legislation encourage shipping companies in incident reporting, and on the national level a shared incident reporting system (ForeSea) is being pushed forward. The objective of this research project was to find out the IMO’s attitude towards incident reporting, to establish a theoretical framework of reference in incident reporting, and to observe how reporting is actually being employed on the seas. Existing incident reporting systems were also researched. The study was carried out using a literature review and the results previously gathered in interviews. The results of phase two were elaborated further for themes relating to incident reporting. According to the findings of this research, the theoretical background of incident reporting dates back to the early 20th century. Although some theories are widely accepted, some have also received criticism. The lack of a concise, shared terminology poses major difficulties in maritime incident reporting and in determining its efficiency. A central finding is the fact that existing incident reporting focuses mostly on information flow away from the ship, whereas the backward information flow is much less planned and monitored. In incident reporting, both nationally and internationally, stakeholders are plenty. The information produced by these parties is scattered, however, and thus not very usable. Based on this research, the centralizing of this information should be made a priority. Traditionally, the success of incident reporting has been determined statistically, from the number of reported incidents. Yet existing reporting systems have not been designed with such statistical analysis in mind, so different methodologies might yield a more comprehensive view. The previous findings of seafarers and management (including shipping companies and administration) having differing views on safety work and safety management were backed up by the results of this study. Seafarers find seamanship and storytelling important, while management wants a more systematic and broad approach on safety matters. The research project was carried out by the Centre for Maritime Studies of the University of Turku, in the Kotka unit (Maritime Logistics Research), with coordination by the Kotka Maritime Research Centre. The major financiers of the project were the European Union and the city of Kotka. The financing authority was the Regional Council of Päijät-Häme. Partners in the project were the shipping companies Finnlines Oyj, Kristina Cruises Oy, Meriaura Oy and VG-Shipping Oy, and the ports of Helsinki, Kotka and Hamina. The partners provided both funding for the project and information for the research.

Suunnittelukapasiteettien seurantamallin kehittäminen

The first main objective of this study was to develop a planning capacity management model for a chocolate and confectionary company in Finland. The second objective was to analyze how capacity updates would affect cost accounting practices. In addition, a creation of an update and maintenance process of planning capacities was determined as a sub-objective of developing the capacity management model. The thesis was started with analyzing the needs, requirements and constraints of the capacity management model and model’s connection with cost accounting. This was done by interviewing key officials like production planners, managers and controllers. A thorough literature review was also done at an early phase. Furthermore, internal systems and software architecture got to be acquainted with. The model was constructed as an Excel-based platform which will get its input data from Enterprise Resource Planning system and Production Performance Measurement system. The main purpose of the planning capacity management model is to make sure that the production planners can utilize more precise parameters but it also offers tools for the production managers to assess production performance and effectiveness at the product level. In addition to production planning, planning capacities are also tightly involved with cost accounting as many direct and indirect costs are allocated to the products utilizing planning capacities. For this reason, the linkage between product costing and capacity is also diversely examined in the thesis. Development suggestions conclude the report by giving some guidelines for more precise and consistent production planning and cost accounting between the factories.

Kinetic modeling of mechanisms of industrially important organic reactions in gas and liquid phase

This dissertation is based on 5 articles which deal with reaction mechanisms of the following selected industrially important organic reactions: 1. dehydrocyclization of n-butylbenzene to produce naphthalene 2. dehydrocyclization of 1-(p-tolyl)-2-methylbutane (MB) to produce 2,6-dimethylnaphthalene 3. esterification of neopentyl glycol (NPG) with different carboxylic acids to produce monoesters 4. skeletal isomerization of 1-pentene to produce 2-methyl-1-butene and 2-methyl-2-butene The results of initial- and integral-rate experiments of n-butylbenzene dehydrocyclization over selfmade chromia/alumina catalyst were applied when investigating reaction 2. Reaction 2 was performed using commercial chromia/alumina of different acidity, platina on silica and vanadium/calcium/alumina as catalysts. On all catalysts used for the dehydrocyclization, major reactions were fragmentation of MB and 1-(p-tolyl)-2-methylbutenes (MBes), dehydrogenation of MB, double bond transfer, hydrogenation and 1,6-cyclization of MBes. Minor reactions were 1,5-cyclization of MBes and methyl group fragmentation of 1,6- cyclization products. Esterification reactions of NPG were performed using three different carboxylic acids: propionic, isobutyric and 2-ethylhexanoic acid. Commercial heterogeneous gellular (Dowex 50WX2), macroreticular (Amberlyst 15) type resins and homogeneous para-toluene sulfonic acid were used as catalysts. At first NPG reacted with carboxylic acids to form corresponding monoester and water. Then monoester esterified with carboxylic acid to form corresponding diester. In disproportionation reaction two monoester molecules formed NPG and corresponding diester. All these three reactions can attain equilibrium. Concerning esterification, water was removed from the reactor in order to prevent backward reaction. Skeletal isomerization experiments of 1-pentene were performed over HZSM-22 catalyst. Isomerization reactions of three different kind were detected: double bond, cis-trans and skeletal isomerization. Minor side reaction were dimerization and fragmentation. Monomolecular and bimolecular reaction mechanisms for skeletal isomerization explained experimental results almost equally well. Pseudohomogeneous kinetic parameters of reactions 1 and 2 were estimated by usual least squares fitting. Concerning reactions 3 and 4 kinetic parameters were estimated by the leastsquares method, but also the possible cross-correlation and identifiability of parameters were determined using Markov chain Monte Carlo (MCMC) method. Finally using MCMC method, the estimation of model parameters and predictions were performed according to the Bayesian paradigm. According to the fitting results suggested reaction mechanisms explained experimental results rather well. When the possible cross-correlation and identifiability of parameters (Reactions 3 and 4) were determined using MCMC method, the parameters identified well, and no pathological cross-correlation could be seen between any parameter pair.

Biosynthesis of Yersinia enterocolitica serotype O:3 lipopolysaccharide outer core

Lipopolysacharide (LPS) present on the outer leaflet of Gram-negative bacteria is important for the adaptation of the bacteria to the environment. Structurally, LPS can be divided into three parts: lipid A, core and O-polysaccharide (OPS). OPS is the outermost and also the most diverse moiety. When OPS is composed of identical sugar residues it is called homopolymeric and when it is composed of repeating units of oligosaccharides it is called heteropolymeric. Bacteria synthesize LPS at the inner membrane via two separate pathways, Lipid A-core via one and OPS via the other. These are ligated together in the periplasmic space and the completed LPS molecule is translocated to the surface of the bacteria. The genes directing the OPS biosynthesis are often clustered and the clusters directing the biosynthesis of heteropolymeric OPS often contain genes for i) the biosynthesis of required NDP-sugar precursors, ii) glycosyltransferases needed to build up the repeating unit, iii) translocation of the completed O-unit to the periplasmic side of the inner membrane (flippase) and iv) polymerization of the repeating units to complete OPS. The aim of this thesis was to characterize the biosynthesis of the outer core (OC) of Yersinia enterocolitica serotype O:3 (YeO3). Y. enterocolitica is a member of the Gram-negative Yersinia genus and it causes diarrhea followed sometimes by reactive arthritis. The chemical structure of the OC and the nucleotide sequence of the gene cluster directing its biosynthesis were already known; however, no experimental evidence had been provided for the predicted functions of the gene products. The hypothesis was that the OC biosynthesis would follow the pathway described for heteropolymeric OPS, i.e. a Wzy-dependent pathway. In this work the biochemical activities of two enzymes involved in the NDP-sugar biosynthesis was established. Gne was determined to be a UDP-N-acetylglucosamine-4-epimerase catalyzing the conversion of UDP-GlcNAc to UDP-GalNAc and WbcP was shown to be a UDP-GlcNAc- 4,6-dehydratase catalyzing the reaction that converts UDP-GlcNAc to a rare UDP-2-acetamido- 2,6-dideoxy-d-xylo-hex-4-ulopyranose (UDP-Sugp). In this work, the linkage specificities and the order in which the different glycosyltransferases build up the OC onto the lipid carrier were also investigated. In addition, by using a site-directed mutagenesis approach the catalytically important amino acids of Gne and two of the characterized glycosyltranferases were identified. Also evidence to show the enzymes involved in the ligations of OC and OPS to the lipid A inner core was provided. The importance of the OC to the physiology of Y. enterocolitica O:3 was defined by determining the minimum requirements for the OC to be recognized by a bacteriophage, bacteriocin and monoclonal antibody. The biological importance of the rare keto sugar (Sugp) was also shown. As a conclusion this work provides an extensive overview of the biosynthesis of YeO3 OC as it provides a substantial amount of information of the stepwise and coordinated synthesis of the Ye O:3 OC hexasaccharide and detailed information of its properties as a receptor.

Political philosophy, ethnology, and time: a study of the notion of historical handicap

This article starts by identifying the crucial importance of the notion of historical handicap for the present-day social sciences of Latin America. Such notion is not an original invention made by Latinamericanists. On the contrary, I demonstrate that the genealogy of the notion of historical handicap must be sought in the tradition of Western political philosophy. Such genealogy must take into account the way it was integrated into ethnological descriptions. When and how did the Other become the backward, the primitive? While this relation was secondary for ancient Greek thought, theories of historical development became the main source of ethnological categories in the modern era. Interestingly enough, this modern synthesis suited the practical purpose of justifying two successive waves of European imperialistic: the era of discoveries, and 19th century colonialism. The article concludes by raising questions about the present role and application of the social sciences.

The structures of the honeydew oligosaccharides synthesized by Claviceps africana

The structures of the principal oligosaccharides in the honeydew exudate of the sorghum ergot pathogen Claviceps africana, which has become epidemic in the Americas, have been characterized through linkage analysis using FAB-MS and GC-MS techniques, as 1,6-di-b-D-fructofuranosyl-D-mannitol and 1,5-di-b-D-fructofuranosyl-D-arabitol trisaccharides, 1-b-D-fructofuranosyl-D-mannitol and 5-b-D-fructofuranosyl-D-arabitol disaccharides and other minor disaccharides and trisaccharides. Their structural diversity is explained according to perceived biosynthetic interrelationships in pathways that appear to be unique amongst ergot fungi, particularly concerning intra-molecular reduction of fructose. The oligosaccharide, 1,6-di-b-D-fructofuranosyl-D-mannitol, which inhibits C. africana macrospore germination at a concentration in water of 1 g/mL or more, forms together with other slightly less bioactive oligosaccharides, the basis of a novel strategy to limit ergot disease losses in hybrid sorghum seed production.