Regional potential for collaborative implementation of small CHP plants in bioenergy technology

This thesis is a preliminary study targeting South-Eastern Finland. The objective was to find out the financial and functional readiness and willingness of the small and medium-sized enterprises of the region to manufacture and sell distributed bioenergy solutions collaboratively as a business network. In this case these solutions mean small-scale (0.5 - 3 MW) woodchips-operated combined heat and power (CHP) plants. South-Eastern Finland has suffered from a decline in the recent years, mostly due to the problems of the traditionally strong industrial know-how area of the region, the paper industry. Local small and medium-sized companies will have to find new ways to survive the toughening competition. A group of 40 companies from suitable industries were selected and financial and comparative analysis was performed on them. Additionally 19 managing directors of the companies were selected for an interview to find out their views on networking, its requirements, advantages and the general interest in it. The studied companies were found to be generally in fairly good financial condition and in that sense, fit for networking activities. The interviews revealed that the companies were capable of producing all the needed elements for the plants in question, and the managers appeared to be very interested in and have a positive attitude towards such business networks. Thus it can be said that the small and medium-sized companies of the region are capable of and interested in manufacturing small bio-CHP plants as a production network.

The Possibilities and Dosimetric Limitations of MLC-Based Intensity-Modulated Radiotherapy Delivery and Optimization Techniques

The use of intensity-modulated radiotherapy (IMRT) has increased extensively in the modern radiotherapy (RT) treatments over the past two decades. Radiation dose distributions can be delivered with higher conformality with IMRT when compared to the conventional 3D-conformal radiotherapy (3D-CRT). Higher conformality and target coverage increases the probability of tumour control and decreases the normal tissue complications. The primary goal of this work is to improve and evaluate the accuracy, efficiency and delivery techniques of RT treatments by using IMRT. This study evaluated the dosimetric limitations and possibilities of IMRT in small (treatments of head-and-neck, prostate and lung cancer) and large volumes (primitive neuroectodermal tumours). The dose coverage of target volumes and the sparing of critical organs were increased with IMRT when compared to 3D-CRT. The developed split field IMRT technique was found to be safe and accurate method in craniospinal irradiations. By using IMRT in simultaneous integrated boosting of biologically defined target volumes of localized prostate cancer high doses were achievable with only small increase in the treatment complexity. Biological plan optimization increased the probability of uncomplicated control on average by 28% when compared to standard IMRT delivery. Unfortunately IMRT carries also some drawbacks. In IMRT the beam modulation is realized by splitting a large radiation field to small apertures. The smaller the beam apertures are the larger the rebuild-up and rebuild-down effects are at the tissue interfaces. The limitations to use IMRT with small apertures in the treatments of small lung tumours were investigated with dosimetric film measurements. The results confirmed that the peripheral doses of the small lung tumours were decreased as the effective field size was decreased. The studied calculation algorithms were not able to model the dose deficiency of the tumours accurately. The use of small sliding window apertures of 2 mm and 4 mm decreased the tumour peripheral dose by 6% when compared to 3D-CRT treatment plan. A direct aperture based optimization (DABO) technique was examined as a solution to decrease the treatment complexity. The DABO IMRT technique was able to achieve treatment plans equivalent with the conventional IMRT fluence based optimization techniques in the concave head-and-neck target volumes. With DABO the effective field sizes were increased and the number of MUs was reduced with a factor of two. The optimality of a treatment plan and the therapeutic ratio can be further enhanced by using dose painting based on regional radiosensitivities imaged with functional imaging methods.

Peltipoliisista hengenpelastajaksi : Automaattisen liikenneturvallisuusvalvonnan tarveselvitys 2011 – 2015

Työssä laadittiin automaattisen liikenneturvallisuusvalvonnan kehittämis- ja investointisuunnitelma vuosille 2011-2015 Varsinais-Suomen ja Satakunnan maantieverkolle. Suunnitelmaan kuului nykyisen toimintamallin ja kehittämistarpeiden arviointi sekä vuosina 2011-2015 toteutettavien automaattivalvontajaksojen ja hankkeiden priorisointi. Lisäksi työssä kuvattiin Ruotsissa käytössä olevaa automaattivalvontatekniikkaa ja -toimintamallia sekä esitettiin toimenpide-ehdotuksia automaattivalvonnan hyväksyttävyyden lisäämiseksi. Nykyistä toimintamallia ja automaattivalvonnan kehittämistarpeita arvioitiin asiantuntijahaastattelujen perusteella. Asiantuntijat pitivät nykyistä toimintamallia pääasiassa toimivana ja tehokkaana, sillä suhteellisen pienillä kustannuksilla on päästy tehokkaisiin tuloksiin. Automaattivalvonnassa on kuitenkin asiantuntijoiden mielestä vielä kehitettävää ja Ruotsin toimintamallia pidettiin hyvänä suuntana ja esimerkkinä. Suurimpina kehittämiskohteina pidettiin tekniikan kehittämistä sekä tiedon käsittelyn nopeuttamista ja automatisointia, mikä lisäisi poliisin resursseja valvonnan suorittamiseen. Vuosina 2011-2015 toteutettavat automaattivalvotut tiejaksot priorisoitiin ensisijaisesti onnettomuustiheyksien, onnettomuusmäärien, Tarva-laskentatulosten, nopeustietojen ja liikennemäärien perusteella. Onnettomuustilastoista huomioitiin lähinnä henkilövahinkoon johtaneet onnettomuudet. Lisäksi Tarva-laskentatuloksia hyödynnettiin automaattivalvonnan vaikutusten ja tehokkuuden arvioinnissa. Haastateltujen asiantuntijoiden mielestä tärkeimmät keinot hyväksyttävyyden lisäämiseksi olivat valvonnan avoimuus, valvontalaitteiden näkyvyys ja jatkuva valvonnasta tiedottaminen. Tiedottamisella tuodaan esille järjestelmän hyödyt ja sen merkitys liikenteelle ja liikenneturvallisuuteen. Myös automaattivalvontakameran brändin muuttamista Ruotsin mallin mukaisesti turvallisuuskameraksi pidettiin hyvänä. Tässä työssä esitettiin suunnitelma automaattivalvonnan hyväksyttävyyden lisäämiseksi.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Sawfly larval poisoning in cattle: Report on new outbreaks and brief review of the literature

Sawfly larval poisoning (SLP) is an acute hepatotoxicosis documented in livestock in Australia, Denmark and in countries of South America. It is caused by the ingestion of the larval stage of insects of the suborder Symphyta, order Hymenoptera, commonly known as "sawfly". Three species of sawfly are reportedly involved in the toxicosis. The insect involved in Australian SLP is Lophyrotoma interrupta (Pergidae), in Denmark the cause of SLP is the ingestion of the larvae Arge pullata (Argidae), and in South American countries documented outbreaks of SLP were caused by the ingestion of yet another sawfly, Perreyia flavipes (Pergidae). In all geographical areas where it occurred, SLP causes important livestock losses. In cattle, as well as in other affected species, the disease has a short clinical course and in many outbreaks affected cattle can be found dead. When observed, clinical signs include apathy, recumbence, tremors, paddling movements and death in 24-48 hours. Neurological signs such aggressiveness attributable to hepatic encephalopathy are also observed. In cases with a more protracted course icterus and photodermatitis may develop. Gross findings included ascites, petechiae and ecchymosis over serosal surfaces of thoracic and abdominal cavities, and an enlarged liver that displays accentuation of the lobular pattern and edema of the gall bladder wall. Sawfly larval body fragments and heads are consistently found in the fore stomachs and occasionally abomasum of affected cattle. Main microscopic lesions are restricted to the liver and consist of centrolobular (periacinar) to massive hepatocellular necrosis. In most lobules necrotic areas extended up to the portal triads where only a few viable hepatocytes remain. Mild to moderate lymphocyte necrosis is seen in lymphatic tissues. Cases occur in the winter months when the larval stages of the sawfly are developing. D-amino acid-containing peptides have been found to be the toxic principle in each sawfly involved in SLP. The octapeptide lophyrotomin is the major toxin in the in the larvae of Australian and Danish sawflies and is present in small amounts in the larvae of South American sawfly. The heptadecapeptide pergidin is the main toxin in the South American sawfly while small amounts of pergidin have been found in the other two species of toxic sawfly. During the winter of 2011 (July-August) four outbreaks of SLP were diagnosed in the State of Rio Grande do Sul, Brazil. The findings in those outbreaks are reported here and a brief review of the literature regarding SLP around the world is provided.

Från plåtpolis till livräddare : Behovsanalys för automatisk trafiksäkerhetskontroll 2011 – 2015

I det här arbetet utformades en utvecklings- och investeringsplan för automatisk trafiksäkerhetsövervakning för åren 2011-2015 för landsvägsnätet i Egentliga Finland och Satakunta. Planen innehåller analys av den nuvarande verksamhetsmodellen och förslag hur verksamhetsmodellen kunde förbättras samt förslag om vilka vägavsnitt som ska få automatisk övervakning och vilka projekt som ska prioriteras under åren 2011-2015. Vidare beskrivs i planen den automatiska övervakningsteknik och verksamhetsmodell som används i Sverige samt åtgärdsförslag för att öka den automatiska trafikövervakningens acceptans. Den nuvarande verksamhetsmodellen och behovet av att utveckla den automatiska trafikövervakningen har utvärderats på basis av intervjuer med experter. Experterna ansåg att den nuvarande verksamhetsmodellen i huvudsak är funktionell och effektiv, eftersom man med relativt små kostnader har uppnått effektiva resultat. Den automatiska trafikövervakningen måste dock fortfarande utvecklas och Sveriges verksamhetsmodell ansågs vara en bra förebild och ett gott exempel. De viktigaste utvecklingsområdena ansågs vara utveckling av tekniken, snabbare informationsbehandling och automatisering, vilket skulle öka polisens resurser att verkställa övervakningen. Vägavsnitten som ska få automatisk övervakning under åren 2011-2015 prioriterades främst på basis av olycksfrekvens, antal olyckor, Tarva-beräkningsresultat, hastighetsdata och trafikmängder. Av olycksstatistiken har man främst uppmärksammat personskadeolyckor. Tarva-beräkningarna användes också för att utvärdera den automatiska trafikövervakningens inverkan och effektivitet. Enligt de intervjuade experterna är öppenhet kring övervakningen, synlig övervakningsapparatur och kontinuerlig informationsförmedling bland de viktigaste sätten att öka acceptansen. Genom att informera för man fram systemets fördelar och dess betydelse för trafiksäkerheten. Att förändra övervakningskamerans varumärke till säkerhetskamera enligt Sveriges modell ansågs även vara bra. I detta arbete presenteras en plan för att utveckla acceptansen för automatisk trafiksäkerhetsövervakning.

Influence of seed size and ecological factors on the germination and emergence of field bindweed (Convolvulus arvensis)

An understanding of seed germination ecology of weeds can assist in predicting their potential distribution and developing effective management strategies. Influence of environmental factors and seed size on germination and seedling emergence of Convolvulus arvensis (field bindweed) was studied in laboratory and greenhouse conditions. Germination occurred over a wide range of constant temperatures, between 15 and 40 ºC, with optimum germination between 20 and 25 ºC. Time to start germination, time to 50% germination and mean germination time increased while germination percentage and germination index decreased with an increase in temperature from 20 ºC, salinity and osmotic stress. However, germination was tolerant to low salt (25 mM) or osmotic stress (0.2 MPa), but as salinity and osmotic stress increased, germination percentage and germination index decreased. Seeds of C. arvensis placed at soil surface showed maximum emergence and decreased as seeding depth increased. Seeds of C. arvensis germinated over a wide range of pH (4 to 9) but optimum germination occurred at pH 6 to 8. Under highly alkaline and acidic pH, time to start germination, time to 50% germination and mean germination time increased while germination percentage and germination index decreased. Increase in field capacity caused decreased time to start germination, time to 50% germination and mean germination time but increased germination percentage and germination index. Bigger seeds had low time to start germination, time to 50% germination and mean germination time but high germination percentage and germination index. Smaller seeds were more sensitive to environmental factors as compared to larger or medium seeds. It can be concluded that except for pH, all environmental factors and seed sizes adversely affect C. arvensis as regards seed germination or emergence and germination or emergence traits, and larger seeds result in improved stand establishment and faster germination than small seeds, regardless of moisture stress or deeper seeding depth.

Bisnesenkelien sijoituskriteerit aikaisen vaiheen yrityksiin

Diplomityössä tutkitaan bisnesenkelien sijoituskriteereitä aikaisen vaiheen yrityksiin. Työn tavoitteena on selvittää, mitkä ovat keskeiset tekijät, jotka vaikuttavat bisnesenkelien sijoituspäätöksiin aikaisen vaiheen yrityksiin. Työssä tarkastellaan myös bisnesenkelien sijoitusaktiivisuutta. Tutkimuksen tuloksena kävi ilmi, että sijoituspäätökseen vaikuttavat merkittävimmät tekijät olivat yrityksen ydintiimi, tuotteen tai palvelun innovatiivisuus, markkinoiden kasvu ja skaalautuvuus sekä markkinoilla oleva kilpailu. Sijoituskriteerien ymmärtäminen on keskeistä aikaisen vaiheen yritysten hakiessa ulkopuolista rahoitusta.

Factors Affecting Consumer Investment Intentions. Empirical Evidence from Finland

The thesis aims to build a theoretical model to explain consumer investment intentions in stocks and investment funds. The model examines the relationships between subjective investment knowledge, expected sacrifice, expected investment value, compatibility, perceived behavioral control and investment intentions. The data was collected via web-based survey and consisted of 45- to 65-year-old Finnish consumers (n=154). Confirmatory factor analysis (CFA), structural equation modeling (SEM) and t-tests were applied in analyzing the data. The results suggest that among average household consumers expected investment value consists of three dimensions, namely, economic, functional, and emotional, whereas expected sacrifice consists of effort, financial risk, source risk, and psychological risk. Two structural models were assessed, one for stock investments and one for investment funds. Whereas the models presented somewhat different outcomes, in both models compatibility had an essential role in explaining consumer investment intentions. Compatibility was affected by expected investment value and expected sacrifice. Subjective investment knowledge impacted consumers’ evaluations of the value and sacrifices. The effect of perceived behavioral control on investment intentions was rather small, however significant. Moreover, the results suggest that there are significant differences between consumers with no investment experience and consumers with investment experience in subjective investment knowledge, the dimensions of expected sacrifices and expected investment value, perceived behavioral control, compatibility and investment intentions.

Lean Innovation in Large Companies: a Case of Implementation in R&D

The main objective of the study is to evaluate the impact of Lean Innovation management philosophy on the creativity potential of the large multinational enterprise. A theory of Lean Innovation indicates that the modern company in any industry can successfully combine both waste-decreasing approach and innovative potential promotion through creativity cultivation or, at least, preservation. The theoretical part of the work covers the main factors, pros and cons of Lean thinking and Innovation management separately, along with generalized new product development overview. While the modern international market becomes more accessible for entrepreneural initiatives, small enterprises and start-ups, large international corporations are more subject to adopt the Lean Innovation approach in both operational and product development sectors due to extended resources and capabilities. Moreover, a multinational enterprise is a highly probable pioneer in Lean innovation implementation. The empirical part of the thesis refers to a case of large European enterprise, operating in many markets around the globe, that currently undergoes innovation management adjustments and implementations in product development while already have related themselves with operational process optimization process through Lean thinking. A goal of the work is to understand what kind of difficulties and consequences a large international firm faces when dealing with Lean Innovation to improve own performance, if they can be sealed for generalized approach.

Spatial and temporal variation in fish populations and assemblages in coastal waters of the northern Baltic Proper

The distribution and traits of fish are of interest both ecologically and socio-economically. In this thesis, phenotypic and structural variation in fish populations and assemblages was studied on multiple spatial and temporal scales in shallow coastal areas in the archipelago of the northern Baltic Proper. In Lumparn basin in Åland Islands, the fish assemblage displayed significant seasonal variation in depth zone distribution. The results indicate that investigating both spatial and temporal variation in small scale is crucial for understanding patterns in fish distribution and community structure in large scale. The local population of Eurasian perch Perca fluviatilis L displayed habitat-specific morphological and dietary variation. Perch in the pelagic zone were on average deeper in their body shape than the littoral ones and fed on fish and benthic invertebrates. The results differ from previous studies conducted in freshwater habitats, where the pelagic perch typically are streamlined in body shape and zooplanktivorous. Stable isotopes of carbon and nitrogen differed between perch with different stomach contents, suggesting differentiation of individual diet preferences. In the study areas Lumparn and Ivarskärsfjärden in Åland Islands and Galtfjärden in Swedish east coast, the development in fish assemblages during the 2000’s indicated a general shift towards higher abundances of small-bodied lower-order consumers, especially cyprinids. For European pikeperch Sander lucioperca L., recent declines in adult fish abundances and high mortalities (Z = 1.06–1.16) were observed, which suggests unsustainably high fishing pressure on pikeperch. Based on the results it can be hypothesized that fishing has reduced the abundances of large predatory fish, which together with bottom-up forcing by eutrophication has allowed the lower-order consumer species to increase in abundances. This thesis contributes to the scientific understanding of aquatic ecosystems with new descriptions on morphological and dietary adaptations in perch in brackish water, and on the seasonal variation in small-scale spatial fish distribution. The results also demonstrate anthropogenic effects on coastal fish communities and underline the urgency of further reducing nutrient inputs and regulating fisheries in the Baltic Sea region.

Early life, current socioeconomic position and serum lipids in young adulthood of participants in a cohort study initiated in 1978/1979

The association between socioeconomic position (SEP) and serum lipids has been little studied and the results have been controversial. A total of 2063 young adults born in 1978/79 were evaluated at 23-25 years of age in the fourth follow-up of a cohort study carried out in Ribeirão Preto, SP, Brazil, corresponding to 31.8% of the original sample. Total serum cholesterol (TC), triglycerides, high-density cholesterol (HDL cholesterol) and low-density cholesterol (LDL cholesterol) were analyzed according to SEP at birth and during young adulthood. SEP was classified into tertiles of family income and a cumulative score of socioeconomic disadvantage was created. TC was 11.85 mg/100 mL lower among men of lower SEP in childhood (P < 0.01) but no difference was found in women, whereas it was 8.46 lower among men (P < 0.01) and 8.21 lower among women of lower SEP in adulthood (P < 0.05). Individuals of lower SEP had lower LDL and HDL cholesterol, with small differences between sexes and between the two times in life. There was no association between SEP and triglyceride levels. After adjustment of income at one time point in relation to the other, some associations lost significance. The greater the socioeconomic disadvantage accumulated along life, the lower the levels of TC, LDL and HDL cholesterol (P < 0.05). The socioeconomic gradient of TC and LDL cholesterol was inverse, representing a lower cardiovascular risk for individuals of lower SEP, while the socioeconomic gradient of HDL cholesterol indicated a lower cardiovascular risk for individuals of higher SEP.

Lipopolysaccharide-induced expression of cell surface receptors and cell activation of neutrophils and monocytes in whole human blood

Lipopolysaccharide (LPS) activates neutrophils and monocytes, inducing a wide array of biological activities. LPS rough (R) and smooth (S) forms signal through Toll-like receptor 4 (TLR4), but differ in their requirement for CD14. Since the R-form LPS can interact with TLR4 independent of CD14 and the differential expression of CD14 on neutrophils and monocytes, we used the S-form LPS from Salmonella abortus equi and the R-form LPS from Salmonella minnesota mutants to evaluate LPS-induced activation of human neutrophils and monocytes in whole blood from healthy volunteers. Expression of cell surface receptors and reactive oxygen species (ROS) and nitric oxide (NO) generation were measured by flow cytometry in whole blood monocytes and neutrophils. The oxidative burst was quantified by measuring the oxidation of 2',7'-dichlorofluorescein diacetate and the NO production was quantified by measuring the oxidation of 4-amino-5-methylamino-2',7'-difluorofluorescein diacetate. A small increase of TLR4 expression by monocytes was observed after 6 h of LPS stimulation. Monocyte CD14 modulation by LPS was biphasic, with an initial 30% increase followed by a 40% decrease in expression after 6 h of incubation. Expression of CD11b was rapidly up-regulated, doubling after 5 min on monocytes, while down-regulation of CXCR2 was observed on neutrophils, reaching a 50% reduction after 6 h. LPS induced low production of ROS and NO. This study shows a complex LPS-induced cell surface receptor modulation on human monocytes and neutrophils, with up- and down-regulation depending on the receptor. R- and S-form LPS activate human neutrophils similarly, despite the low CD14 expression, if the stimulation occurs in whole blood.

Purchasing Process of Industrial Solutions – Added Value, Difficulties and Good Practices

Purpose of this study is to clarify the industrial solutions purchasing process from purchaser companies’ point of view. Also customer’s view on value generating aspects and difficulties in purchases will be discussed as well as different purchas-ing entities where customers have ended up in their solution purchases. Current solution literature is mainly concentrated in supplier views and customer perspec-tive has been left without adequate attention. However, knowledge of the customer and the identification of customer need are at the core of a successful solution business. The focus of this thesis is on Finnish companies’ solution purchases that have been realized during last five years. Industrial solutions in this case are facto-ries or other large industrial plants. Industrial solutions’ purchasing process will be opened all the way from discovering the need until the start-up of the plant. Of in-terest is the customer experience of the success of the acquisition and the pur-chaser’s view on good practices allowing a successful procurement project.

Guidelines for small embedded system companies aiming to enter the space industry

This guide summarizes useful information about the European Space Agency (ESA), the European space industry, the ECSS standards and product assurance for small and medium enterprises that are aiming to enter the industry. Additionally, the applicability of agile development in space projects is discussed.