Embedding metacognitive skills in spatial design

Metacognitive skills are considered to be essential for graduates from higher education institutions. In teaching spatial design, a fundamental aspect of student learning is the ability to ‘frame’ problems, generate solutions and explore possibilities of different solutions. This article proposes an innovative approach to design education through the implementation of strategies into the design process. The externalisation of implicit and tacit learning through metacognition connects theoretical concepts to interior design process and practice, as well as allowing students to engage and critically analyse issues surrounding theory and practice, thus equipping them with the skills as future design professionals.

Wave propagation in elastic solids undergoing damage and growth process

Modeling and analysis of wave propagation in elastic solids undergoing damage and growth process are reported in this paper. Two types of diagnostic problems, (1) the propagation of waves in the presence of a slow growth process and (2) the propagation of waves in the presence of a fast growth process, are considered. The proposed model employs a slow and a fast time scale and a homogenization technique in the wavelength scale. A detailed analysis of wave dispersion is carried out. A spectral analysis reveals certain low-frequency bands, where the interaction between the wave and the growth process produces acoustic metamaterial-like behavior. Various practical issues in designing an efficient method of acousto-ultrasonic wave based diagnostics of the growth process are discussed. Diagnostics of isotropic damage in a ductile or quasi-brittle solid by using a micro-second pulsating signal is considered for computer simulations, which is to illustrate the practical application of the proposed modeling and analysis. The simulated results explain how an estimate of signal spreading can be effectively employed to detect the presence of a steady-state damage or the saturation of a process.

BPMN process views construction

Process view technology is catching more attentions in modern business process management, as it enables the customisation of business process representation. This capability helps improve the privacy protection, authority control, flexible display, etc., in business process modelling. One of approaches to generate process views is to allow users to construct an aggregate on their underlying processes. However, most aggregation approaches stick to a strong assumption that business processes are always well-structured, which is over strict to BPMN. Aiming to build process views for non-well-structured BPMN processes, this paper investigates the characteristics of BPMN structures, tasks, events, gateways, etc., and proposes a formal process view aggregation approach to facilitate BPMN process view creation. A set of consistency rules and construction rules are defined to regulate the aggregation and guarantee the order preservation, structural and behaviour correctness and a novel aggregation technique, called EP-Fragment, is developed to tackle non-well-structured BPMN processes.

Role-based process view derivation and composition

The process view concept deploys a partial and temporal representation to adjust the visible view of a business process according to various perception constraints of users. Process view technology is of practical use for privacy protection and authorization control in process-oriented business management. Owing to complex organizational structure, it is challenging for large companies to accurately specify the diverse perception of different users over business processes. Aiming to tackle this issue, this article presents a role-based process view model to incorporate role dependencies into process view derivation. Compared to existing process view approaches, ours particularly supports runtime updates to the process view perceivable to a user with specific view merging operations, thereby enabling the dynamic tracing of process perception. A series of rules and theorems are established to guarantee the structural consistency and validity of process view transformation. A hypothetical case is conducted to illustrate the feasibility of our approach, and a prototype is developed for the proof-of-concept purpose.

A High-Resolution Transmission of the Precipitation Process in a Electron Microscopy Study Dilute Ti-N Alloy

The precipitation processes in dilute nitrogen alloys of titanium have been examined in detail by conventional transmission electron microscopy (CTEM) and high-resolution electron microscopy (HREM). The alloy Ti-2 at. pct N on quenching from its high-temperature beta phase field has been found to undergo early stages of decomposition. The supersaturated solid solution (alpha''-hcp) on decomposition gives rise to an intimately mixed, irresolvable product microstructure. The associated strong tweed contrast presents difficulties in understanding the characteristic features of the process. Therefore, HREM has been carried out with a view to getting a clear picture of the decomposition process. Studies on the quenched samples of the alloy suggest the formation of solute-rich zones of a few atom layers thick, randomly distributed throughout the matrix. On aging, these zones grow to a size beyond which the precipitate/matrix interfaces appear to become incoherent and the alpha' (tetragonal) product phase is seen distinctly. The structural details, the crystallography of the precipitation process, and the sequence of precipitation reaction in the system are illustrated.

Thermodynamic characterization of the conformational stability of the homodimeric protein, pea lectin

The conformational stability of the homodimeric pea lectin was determined by both isothermal urea-induced and thermal denaturation in the absence and presence of urea. The denaturation profiles were analyzed to obtain the thermodynamic parameters associated with the unfolding of the protein. The data not only conform to the simple A(2) double left right arrow 2U model of unfolding but also are well described by the linear extrapolation model for the nature of denaturant-protein interactions. In addition, both the conformational stability (Delta G(s)) and the Delta C-p for the protein unfolding is quite high, at about 18.79 kcal/ mol and 5.32 kcal/(mol K), respectively, which may be a reflection of the relatively larger size of the dimeric molecule (M-r 49 000) and, perhaps, a consequent larger buried hydrophobic core in the folded protein. The simple two-state (A(2) double left right arrow 2U) nature of the unfolding process, with the absence of any monomeric intermediate, suggests that the quaternary interactions alone may contribute significantly to the conformational stability of the oligomer-a point that may be general to many oligomeric proteins.

Different phenomenological theories and their abilities to describe the interdiffusion process in a binary system during multiphase growth

There are essentially two different phenomenological models available to describe the interdiffusion process in binary systems in the olid state. The first of these, which is used more frequently, is based on the theory of flux partitioning. The second model, developed much more recently, uses the theory of dissociation and reaction. Although the theory of flux partitioning has been widely used, we found that this theory does not account for the mobility of both species and therefore is not suitable for use in most interdiffusion systems. We have first modified this theory to take into account the mobility of both species and then further extended it to develop relations or the integrated diffusion coefficient and the ratio of diffusivities of the species. The versatility of these two different models is examined in the Co-Si system with respect to different end-member compositions. From our analysis, we found that the applicability of the theory of flux partitioning is rather limited but the theory of dissociation and reaction can be used in any binary system.

Removal Of Chromium From Electroplating Effluents By The Sulfide Process

A method has been developed for the removal of chromium using ferrous sulphide generated in situ. The effects of experimental parameters such as pH, reagent dosages, interference from cations and chelating agents have been investigated. Under optimum conditions, removal efficiencies of 99 and 97% for synthetic and industrial samples have been obtained. The method offers all the advantages of sulphide precipitation process and can be adopted easily for industrial effluents.

Effects of the filling process on the evolution of the mushy zone and macrosegregation in alloy casting

A numerical model of the entire casting process starting from the mould filling stage to complete solidification is presented. The model takes into consideration any phase change taking place during the filling process. A volume of fluid method is used for tracking the metal–air interface during filling and an enthalpy based macro-scale solidification model is used for the phase change process. The model is demonstrated for the case of filling and solidification of Pb–15 wt%Sn alloy in a side-cooled two-dimensional rectangular cavity, and the resulting evolution of a mushy region and macrosegregation are studied. The effects of process parameters related to filling, namely degree of melt superheat and filling velocity on macrosegregation in the cavity, are also investigated. Results show significant differences in the progress of the mushy zone and macrosegregation pattern between this analysis and conventional analysis without the filling effect.

Temperature measurements in the boron carbide manufacturing process - A hot model study

Boron carbide is produced in a heat resistance furnace using boric oxide and petroleum coke as the raw materials. The product yield is very low. Heat transfer plays an important role in the formation of boron carbide. Temperature at the core reaches up to 2600 K. No experimental study is available in the open literature for this high temperature process particularly in terms of temperature measurement and heat transfer. Therefore, a laboratory scale hot model of the process has been setup to measure the temperatures in harsh conditions at different locations in the furnace using various temperature measurement devices such as pyrometer and various types of thermocouple. Particular attention was paid towards the accuracy and reliability of the measured data. The recorded data were analysed to understand the heat transfer process inside the reactor and the effect of it on the formation of boron carbide.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

Turning the Kaleidoscope - (E)FL Educational Experience and Inquiry as Auto/biography

This book is a study on learning, teaching/counselling, and research on the two. My quest has been to find a pedagogically-motivated way of researching learning and teaching interaction, and in particular counselling, in an autonomous language-learning environment. I have tried to develop a method that would make room for lived experience, meaning-making and narrating, because in my view these all characterise learning encounters between language learners and counsellors, and learners and their peers. Lived experience as a source of meaning, telling and co-telling becomes especially significant when we try to listen to the diverse personal and academic voices of the past as expressed in autobiographical narratives. I have aimed at researching various ALMS dialogues (Autonomous Learning Modules, University of Helsinki Language Centre English course and programme), and autobiographical narratives within them, in a way that shows respect for the participants, and that is relevant, reflective and, most importantly, self-reflexive. My interest has been in autobiographical telling in (E)FL [(English as a) foreign language], both in students first-person written texts on their language- learning histories and in the sharing of stories between learners and a counsellor. I have turned to narrative inquiry in my quest and have written the thesis as an experiential narrative. In particular, I have studied learners and counsellors in one and the same story, as characters in one narrative, in an attempt to avoid the impression that I am telling yet another separate, anecdotal story, retrospectively. Through narrative, I have shed light on the subjective dimensions of language learning and experience, and have come closer to understanding the emotional aspects of learning encounters. I have questioned and rejected a distanced and objective approach to describing learning and teaching/counselling. I have argued for a holistic and experiential approach to (E)FL encounters in which there is a need to see emotion and cognition as intertwined, and thus to appreciate learners and counsellors emotionally-charged experiences as integral to their identities. I have also argued for a way of describing such encounters as they are situated in history, time, autobiography, and the learning context. I have turned my gaze on various constellations of lived experience: the data was collected on various occasions and in various settings during one course and consists of videotaped group sessions, individual counselling sessions between students and their group counsellor, biographic narrative interviews with myself, open-ended personally-inspired reflection texts written by the students about their language-learning histories, and student logs and diaries. I do not consider data collection an unproblematic occasion, or innocent practice, and I defend the integrity of the research process. Research writing cannot be separated from narrative field work and analysing and interpreting the data. The foci in my work have turned to be the following: 1) describing ALMS encounters and specifying their narrative aspects; 2) reconceptualising learner and teacher autonomy in ALMS and in (E)FL; 2) developing (E)FL methodologically through a teacher-researcher s identity work; 4) research writing as a dialogical narrative process, and the thesis as an experiential narrative. Identity and writing as inquiry, and the deeply narrative and autobiographical nature of the (E)FL teaching/counselling/researching have come to the fore in this research. Research writing as a relational activity and its implications for situated ways of knowing and knowledge turned out to be important foci. I have also focussed on the context-bound and local teacher knowledge and ways of knowing about being a teacher, and I have argued for personal ways of knowing about, and learning and studying foreign languages. I discuss research as auto/biography: as a practising counsellor I use my own life and (E)FL experience to understand and interpret the stories of the research participants even though I was not involved in their course work. The supposedly static binaries of learner/teacher, and also learner autonomy/teacher autonomy, are thus brought into the discussion. I have highlighted the infinite variability and ever-changing nature of learning and teaching English, but the book is also of relevance to foreign language education in general.

Effects of the digital subtitling software on the subtitling process : A survey among Finnish professional television subtitlers

Tutkielma käsittelee suomalaisten televisiotekstittäjien ammatillisuutta, käännösprosessia ja digitaalisten tekstitysohjelmien vaikutuksia tekstitysprosessiin ammattitekstittäjien näkökulmasta. Suomen television digitalisoituminen on aiheuttanut mullistuksia myös tekstitysalalla kun tekstitettävä kuvamateriaali on ryhdytty toimittamaan käännöstoimistoille ja tekstittäjille digitaalisena. Teoriaosuudessa käsitellään käännös- ja tekstitystutkimusta sekä koulutusta Suomessa, ammattitaitoa ja ammatillisuutta sekä kääntämisen apukeinoja. Tekstittäminen esitellään erikoistuneena kääntämisen muotona. On kuitenkin myös huomioitava, että kääntäminen on yksi vaihe tekstitysprosessissa. Teoriaosuus päättyy suomalaisten televisiotekstittäjien arjen ja työkentän nykytilanteen käsittelyyn – tekstittäjät työskentelevät monenlaisilla työehdoilla ja laadun kriteerit saatetaan joutua arvioimaan uudelleen. Empiirisen osan alussa esitetään, että suomalaisia televisiotekstittäjiä on haastateltu yllättävän vähän, ja Jääskeläisen ajatuksiin nojaten mainitaan, että tekstittämisen alalla on vielä paljon tutkimatta – etenkin suomalaisesta tekstitysprosessista löytyy tutkittavaa. Tutkimuskohde on ammatikseen televisioon tekstityksiä tekevät kääntäjät. Suomalaiselle tekstitykseen erikoistuneelle käännöstoimistolle työskenteleville tekstittäjille lähetettiin alkutalvesta 2008 kyselylomake, jolla kartoitettiin sekä monivalintakysymyksillä että avoimilla kysymyksillä heidän ammatillisuuttaan, työmenetelmiään, käännös- ja tekstitysprosessiaan, ammattiylpeyttään ja -identiteettiään, ajanhallintaansa, sekä heidän käyttämäänsä digitaalista tekstitysohjelmaa. Tutkimuksessa kävi ilmi, että lähes kolmanneksella vastaajista on ammatistaan neutraali tai jopa negatiivinen käsitys. Näitä tekstittäjiä yhdistää se seikka, että kaikilla on alle 5 vuotta kokemusta alalta. Valtaosa vastanneista on kuitenkin ylpeitä siitä, että toimivat suomen kielen ammattilaisina. Tekstitysprosessi oli lomakkeessa jaettu esikatseluvaiheeseen, käännösvaiheeseen, ajastamisvaiheeseen ja korjauskatseluvaiheeseen. Tekstittäjät pyydettiin mm. arvioimaan tekstitysprosessinsa kokonaiskestoa. Kestoissa ilmeni suuria eroavaisuuksia, joista ainakin osa korreloi kokemuksen kanssa. Runsas puolet vastaajista on hankkinut digitaalisen tekstitysohjelmiston käyttöönsä ja osa ajastaa edelleen käännöstoimistossa muun muassa ohjelmiston kalleuden vuoksi. Digitaalisen ohjelmiston myötä tekstitysprosessiin ja työkäytänteisiin on tullut muutoksia, kun videonauhureista ja televisioista on siirrytty pelkän tietokoneen käyttöön. On mahdollista tehdä etätyötä kaukomailta käsin, kääntää ja ajastaa lomittain tai tehdä esiajastus ja kääntää sitten. Digitaalinen tekniikka on siis mahdollistanut tekstitysprosessin muuttumisen ja vaihtoehtoiset työmenetelmät, mutta kaikista menetelmistä ei välttämättä ole tekstittäjälle hyötyä. Perinteinen tekstitysprosessi (esikatselu, repliikkijakojen merkitseminen käsikirjoitukseen, kääntäminen ja repliikkien laadinta, korjaukset ja tarkastuskatselu) vaikuttaa edelleen tehokkaimmalta. Vaikka työkäytänteet eroavat toisistaan, kokonaiskäsitys on se, että digitalisoitumisen alkukangertelujen jälkeen tekstittäjien työskentely on tehostunut.