Some applications of FISST to wireless communications

This paper aims at illustrating some applications of Finite Random Set (FRS) theory to the design and analysis of wireless communication receivers, and at pointing out similarities and differences between this scenario and that pertaining to multi-target tracking, where the use of FRS has been traditionally advocated. Two case studies are considered, l.e., multiuser detection in a dynamic environment, and multicarrier (OFDM) transmission on a frequency-selective channel. Detector designand performance evaluation are discussed, along with the advantages of importing FRS-based estimation techniques to the context of wireless communications.

Sequential estimation of time-varying multipath channel for MIMO-OFDM systems

In this paper, we introduce a pilot-aided multipath channel estimator for Multiple-Input Multiple-Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) systems. Typical estimation algorithms assume the number of multipath components and delays to be known and constant, while theiramplitudes may vary in time. In this work, we focus on the more realistic assumption that also the number of channel taps is unknown and time-varying. The estimation problem arising from this assumption is solved using Random Set Theory (RST), which is a probability theory of finite sets. Due to the lack of a closed form of the optimal filter, a Rao-Blackwellized Particle Filter (RBPF) implementation of the channel estimator is derived. Simulation results demonstrate the estimator effectiveness.

Large-system analysis of a CDMA dynamic channel under a Markovian input process

We study the minimum mean square error (MMSE) and the multiuser efficiency η of large dynamic multiple access communication systems in which optimal multiuser detection is performed at the receiver as the number and the identities of active users is allowed to change at each transmission time. The system dynamics are ruled by a Markov model describing the evolution of the channel occupancy and a large-system analysis is performed when the number of observations grow large. Starting on the equivalent scalar channel and the fixed-point equation tying multiuser efficiency and MMSE, we extend it to the case of a dynamic channel, and derive lower and upper bounds for the MMSE (and, thus, for η as well) holding true in the limit of large signal–to–noise ratios and increasingly large observation time T.

Generalized low-density codes with BCH constituents for full-diversity near-outage performance

A new graph-based construction of generalized low density codes (GLD-Tanner) with binary BCH constituents is described. The proposed family of GLD codes is optimal on block erasure channels and quasi-optimal on block fading channels. Optimality is considered in the outage probability sense. Aclassical GLD code for ergodic channels (e.g., the AWGN channel,the i.i.d. Rayleigh fading channel, and the i.i.d. binary erasure channel) is built by connecting bitnodes and subcode nodes via a unique random edge permutation. In the proposed construction of full-diversity GLD codes (referred to as root GLD), bitnodes are divided into 4 classes, subcodes are divided into 2 classes, and finally both sides of the Tanner graph are linked via 4 random edge permutations. The study focuses on non-ergodic channels with two states and can be easily extended to channels with 3 states or more.

Full diversity product codes for block erasure and block fading channels

We show how to build full-diversity product codes under both iterative encoding and decoding over non-ergodic channels, in presence of block erasure and block fading. The concept of a rootcheck or a root subcode is introduced by generalizing the same principle recently invented for low-density parity-check codes. We also describe some channel related graphical properties of the new family of product codes, a familyreferred to as root product codes.

What is the value of joint processing of pilots and data in block-fading channels?

The spectral efficiency achievable with joint processing of pilot and data symbol observations is compared with that achievable through the conventional (separate) approach of first estimating the channel on the basis of the pilot symbols alone, and subsequently detecting the datasymbols. Studied on the basis of a mutual information lower bound, joint processing is found to provide a non-negligible advantage relative to separate processing, particularly for fast fading. It is shown that, regardless of the fading rate, only a very small number of pilot symbols (at most one per transmit antenna and per channel coherence interval) shouldbe transmitted if joint processing is allowed.

Student modeling based on fuzzy inference mechanisms

The paper presents a competence-based instructional design system and a way to provide a personalization of navigation in the course content. The navigation aid tool builds on the competence graph and the student model, which includes the elements of uncertainty in the assessment of students. An individualized navigation graph is constructed for each student, suggesting the competences the student is more prepared to study. We use fuzzy set theory for dealing with uncertainty. The marks of the assessment tests are transformed into linguistic terms and used for assigning values to linguistic variables. For each competence, the level of difficulty and the level of knowing its prerequisites are calculated based on the assessment marks. Using these linguistic variables and approximate reasoning (fuzzy IF-THEN rules), a crisp category is assigned to each competence regarding its level of recommendation.

Personal and household care giving for adult children to parents and social stratification

Using SHARE database the paper explores the factors conditioning personalcare giving from adult children to their parents. Frequency and intensity ofpersonal care is contrasted with the reciprocal expectations that children haveabout wealth inheritance from their parents and with the opportunity costs of helping, as well as with the capacity of parents of getting help from othersources of personal care. The results may help to understand how inequalitiesin accessing to formal services relate with intergenerational solidarity.

Assessment of construct validity of a virtual reality laparoscopy simulator.

BACKGROUND: The aim of this study was to assess whether virtual reality (VR) can discriminate between the skills of novices and intermediate-level laparoscopic surgical trainees (construct validity), and whether the simulator assessment correlates with an expert's evaluation of performance. METHODS: Three hundred and seven (307) participants of the 19th-22nd Davos International Gastrointestinal Surgery Workshops performed the clip-and-cut task on the Xitact LS 500 VR simulator (Xitact S.A., Morges, Switzerland). According to their previous experience in laparoscopic surgery, participants were assigned to the basic course (BC) or the intermediate course (IC). Objective performance parameters recorded by the simulator were compared to the standardized assessment by the course instructors during laparoscopic pelvitrainer and conventional surgery exercises. RESULTS: IC participants performed significantly better on the VR simulator than BC participants for the task completion time as well as the economy of movement of the right instrument, not the left instrument. Participants with maximum scores in the pelvitrainer cholecystectomy task performed the VR trial significantly faster, compared to those who scored less. In the conventional surgery task, a significant difference between those who scored the maximum and those who scored less was found not only for task completion time, but also for economy of movement of the right instrument. CONCLUSIONS: VR simulation provides a valid assessment of psychomotor skills and some basic aspects of spatial skills in laparoscopic surgery. Furthermore, VR allows discrimination between trainees with different levels of experience in laparoscopic surgery establishing construct validity for the Xitact LS 500 clip-and-cut task. Virtual reality may become the gold standard to assess and monitor surgical skills in laparoscopic surgery.

The Big Band Theory : català col·loquial i humor científic. Proposta de traducció del capítol pilot

Aquest treball elabora una proposta de traducció per al doblatge del capítol pilot de The Big Bang Theory, que combina llenguatge col•loquial i llenguatge científic.L’objectiu és doble: elaborar un llenguatge col•loquial creïble però a la vegada genuí i emprar els equivalents catalans adequats per als termes científics originals.

Luovuus näyttelijäntyössä

This thesis considers creativity in acting and performing. The original question is how to construct roles creatively. The thesis also considers the quality of creativity at a general level. In addition, the question expands to consider directing and, briefly, the ethics of making theatre. The first section discusses acceptation as a tool for opening the blocks that restrain creativity. It also discusses what the use of acceptation causes and what challenges it brings when creativity begins. The second and the third sections deal with two productions that have changed the author's view of creativity and theatre. The first production is "Medeia Goes Karaoke". This section considers the influence of listening and being in contact when making the role of Medeia. The second production is about directing, "My Roots are Water and Blood". This section considers revising performing and directing and especially the influence of the Alexander-technique. The last section concerns the definition of what good acting is. It also discusses the differences between performing and acting and presents the author's opinions concerning the ethics of acting. The aim of this work is to define creativity in acting, performing and theatre-making, through the author' s personal experiences.

Symmetristen komponenttien mallinnus

Tässä insinöörityössä suunniteltiin Helsingin ammattikorkeakoululle jakeluverkoissa tapahtuvien oikosulkujen symmetristen komponenttien laskutavan havainnollistamiseen sopiva sijaiskytkentä. Sijaiskytkennässä tärkeitä huomioitavia asioita olivat mm. jännitetaso, havainnollistavien muuntajien oikosulkukestoisuus, jatkokäyttö laboratoriotyönä ja yleinen havainnollistavuus. Työssä on aluksi perehdytty symmetristen komponenttien ja jakeluverkoissa tapahtuvien oikosulkujen teoriaan. Tämän jälkeen mitoitettiin tarvittavan kytkennän komponenttien jännite- ja virtakestoisuudet mahdolliset lisäkäytöt huomioiden. Näiden rajoitusten mukaan perusteella työtä ruvettiin toteuttamaan. Työssä tilattiin sähkön 40 V:n pääjännitetasolle alentava muuntaja syöttämään oikosulun kestävää muuntajaa, jolla simuloitiin jakeluverkon yleisimpiä vikatyyppejä. Jälkimmäiselle muuntajalle mitoitettiin ja hankittiin sisäistä impedanssia vastaava induktanssi. Tämän avulla rakennettiin kokonaisuus, jonka avulla voidaan simuloida kaikkia tapahtuvia oikosulkuja vastaavat sijaiskytkennät. Työhön jätettiin kehittämisvaraa ja muita laboratoriotyön rakentamismahdollisuuksia tulevien insinööritöiden tekijöille.

Naiskomiikka : huumorista stand upiin, naurusta valtaan

The final project deals with the question of female comedy and the comedy made by women. Comedy has traditionally been made by men and the woman has been the one who laughs. A funny woman has been a rare phenomenon. Although times have changed and gender roles have become more flexible, female comedians still remain in a minority compared to their male colleagues. The essay reviews the social and historical structures that influence the position of women in general and on the field of comedy in particular. The teoretical basis to this is feminist theory. Female comedy and humour have features of their own, that are being examined in the essay. It also makes a difference between feminine comedy and feminist comedy. Largely the project handles stand up comedy. The popularity of stand up comedy has changed the field of professional entertainment and brought a number of widely gifted comedians to a common knowledge. Stand up has an opportunity to be a political tool, which is essential for marginal comedians, which also includes female comedians. One of the fundamental subjects of the project is the political character of comedy. The essay also portrays the historical roots of stand up comedy in the Finnish and in the American tradition. It reflects on the fore mothers of the modern female comedian. The reasons that make a woman become a comedian are under consideration, as well as the strategies that help her to get her voice and message delivered. Since a woman is still held in the marginal, it gives female comedy a feature of its own. This way comedy can become a tool for a feminist battle.

ACS800-kaappimoduulien pakkaamon ulkoistaminen

Tässä insinöörityössä selvitetään ABB Oy System AC -liiketoimintayksikön pakkaamon ulkoistamiseen liittyviä ongelmia sekä mahdollisia ratkaisuja näihin ongelmiin. Koko ongelman käsittely on liian laaja projektin yhdelle insinöörityölle. Tässä työssä keskitytään ratkaisemaan ko. ulkoistamiseen liittyvät keskeisimmät ACS800-kaappimoduulien kuljetuslogistiset ongelmat. Näitä ongelmia ovat kaappimoduulien kiinnitystarve kuljetusalustaansa sekä kuljetuspaketoinnin puuttuessa kaappimoduulien suojaaminen maantiekuljetuksen ajaksi. Työssä on otettu huomioon viranomaisten maantiekuljetuksia koskevat vaatimukset. Työssä on suunniteltu uusia kiinnitysvälineitä sekä muutoksia olemassa oleviin kuljetusalustoihin, joita käytetään tehtaan sisäisissä kaappimoduulien siirroissa. Kiinnitysvälineistä on tehty lujuuslaskelmia ja määritelty kiristysmomentteja. Tuotettavuuden ja kustannustehokkuuden kannalta on selvitetty kiinnitysvälineisiin soveltuvia materiaalivaihtoehtoja. Kuljetusalustojen muutoksista on myös tehty ohjeistusta. Tämän työn tulos on uusien kiinnitysvälineiden ja kuljetusalustojen mekaanisten muutosten suunnittelu. Samalla on todistettu, että kaappimoduulien siirto tehtaan ulkopuoliseen pakkaamoon ilman kuljetuspaketointia on teoriassa mahdollista.