Bifurcation analysis of a new Lorenz-like chaotic system

In this paper we study the local codimension one and two bifurcations which occur in a family of three-dimensional vector fields depending on three parameters. An equivalent family, depending on five parameters, was recently proposed as a new chaotic system with a Lorenz-like butterfly shaped attractor and was studied mainly from a numerical point of view, for particular values of the parameters, for which computational evidences of the chaotic attractor was shown. In order to contribute to the understand of this new system we present an analytical study and the bifurcation diagrams of an equivalent three parameter system, showing the qualitative changes in the dynamics of its solutions, for different values of the parameters. (C) 2007 Elsevier Ltd. All rights reserved.

The effect of pH on horseradish peroxidase-catalyzed oxidation of melatonin: production of N-1-acetyl-N-2-formyl-5-methoxykynuramine versus radical-mediated degradation

There is a g-rowing body of evidence that melatonin and its oxidation product, N-1-acetyl-N-2-formyl-5-methoxykynuramine (AFMK), have anti-inflammatory properties. From a nutritional point of view, the discovery of melatonin in plant tissues emphasizes the importance of its relationship with plant peroxidases. Here we found that the pH of the reaction mixture has a profound influence in the reaction rate and products distribution when melatonin is oxidized by the plant enzyme horseradish peroxidase. At pH 5.5. 1 mm of melatonin was almost completely oxidized within 2 min, whereas only about 3% was consumed at pH 7.4. However, the relative yield of AFMK was higher in physiological pH. Radical-mediated oxidation products, including 2-hydroxymelatonin a dimer of, 2-hydroxymelatonin and O-demethylated dimer of melatonin account for the fast consumption of melatonin at pH 5.5. The higher production of AFMK at pH 7.4 was explained by the involvement of compound III of peroxidases as evidenced by spectral studies. on the other hand, the fast oxidative degradation at pH 5.5 was explained by the classic peroxidase cycle.

A moral kantiana entre deontologia e teleologia

This dissertation examines the Kantian moral in a teleological perspective. It consists of a reconstruction of philosophy practice that departs from the investigation of the categorical imperative, the concepts of duty, will, good will, as well as an approach on the ways of investigation of nature, which will enable the foundation to engage in the teleological argument, investigating the organized human beings, the harmonious system, its relationship with the ultimate and most important purpose, always flexing the analysis of these concepts the idea of purpose. Subsequently we will establish an argument about the end terminal and the implication of this concept to think about the real idea of the system in Kant and his relationship or support for moral theory. In essence this paper approaches the moral point of view of ethics, outlining the insufficiency of this field for the foundation of architectural moral, which will enable the final touch or the indispensability or the teleological argument as fundamental to the Kantian moral Theory

HIGH STRENGTH CONCRETE: THE REINFORCED CONCRETE OF THE CENTURY 21(ST)

This work is about the 21st century reinforced concrete analysis under the point of view of its constituent materials. First of all it is described the theoretical approach of the bending elements calculated based on the Norms BAEL 91 standarts. After that, numerical load-displacement are presented from reinforced concrete beams and plates validated by experimental data. The numerical modellings has been carried on in the program CASTEM 2000. In this program a elastoplastic model of Drucker-Prager defines the rupture surface of the concrete in non associative plasticity. The crack is smeared on the Gauss points of the finite elements with formation criterion starting from the definition of the rupture surface in the branch traction-traction of the Rankine model. The reinforcements were modeled in a discrete approach with perfect bond. Finally, a comparative analysis is made between the numerical results and calculated criteria showing the future of high performance reinforced concrete in this beginning of 21st century.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Produtividade da soja e resistência mecânica à penetração do solo sob sistema plantio direto no cerrado brasileiro

A resistência mecânica à penetração do solo pode influenciar, negativamente, o crescimento radicular da soja, afetando, sobremaneira, sua produtividade. No ano agrícola 2008/2009, no município de Selvíria (MS), no Cerrado brasileiro, foi analisada a produtividade da soja, em função da resistência mecânica à penetração de um Latossolo Vermelho distroférrico, no sistema de semeadura direta. O objetivo foi selecionar, entre os atributos pesquisados do solo, aquele com a melhor correlação, linear e espacial, para explicar a variabilidade da produtividade da soja. Foi instalada uma malha geoestatística, para a coleta de dados do solo e da planta, com 120 pontos amostrais, em área de 8,34 ha e declive homogêneo de 0,055 m m-1. Dessa forma, visando-se a auxiliar futuros trabalhos voltados à agricultura de precisão, os quais venham a utilizar os mesmos atributos do presente estudo, os valores dos alcances da dependência espacial a serem empregados deverão estar compreendidos entre 38,1 m e 114,7 m. do ponto de vista linear, a resistência mecânica à penetração do solo, quando avaliada na camada 0,10-0,20 m, apresentou boa correlação exponencial inversa com a produtividade de grãos de soja. Entretanto, do ponto de vista espacial, o número de vagens por planta apresentou-se como bom indicador da produtividade de grãos de soja.

O problema biobjetivo da árvore geradora quadrática em adjacência de arestas

The Quadratic Minimum Spanning Tree Problem (QMST) is a version of the Minimum Spanning Tree Problem in which, besides the traditional linear costs, there is a quadratic structure of costs. This quadratic structure models interaction effects between pairs of edges. Linear and quadratic costs are added up to constitute the total cost of the spanning tree, which must be minimized. When these interactions are restricted to adjacent edges, the problem is named Adjacent Only Quadratic Minimum Spanning Tree (AQMST). AQMST and QMST are NP-hard problems that model several problems of transport and distribution networks design. In general, AQMST arises as a more suitable model for real problems. Although, in literature, linear and quadratic costs are added, in real applications, they may be conflicting. In this case, it may be interesting to consider these costs separately. In this sense, Multiobjective Optimization provides a more realistic model for QMST and AQMST. A review of the state-of-the-art, so far, was not able to find papers regarding these problems under a biobjective point of view. Thus, the objective of this Thesis is the development of exact and heuristic algorithms for the Biobjective Adjacent Only Quadratic Spanning Tree Problem (bi-AQST). In order to do so, as theoretical foundation, other NP-hard problems directly related to bi-AQST are discussed: the QMST and AQMST problems. Bracktracking and branch-and-bound exact algorithms are proposed to the target problem of this investigation. The heuristic algorithms developed are: Pareto Local Search, Tabu Search with ejection chain, Transgenetic Algorithm, NSGA-II and a hybridization of the two last-mentioned proposals called NSTA. The proposed algorithms are compared to each other through performance analysis regarding computational experiments with instances adapted from the QMST literature. With regard to exact algorithms, the analysis considers, in particular, the execution time. In case of the heuristic algorithms, besides execution time, the quality of the generated approximation sets is evaluated. Quality indicators are used to assess such information. Appropriate statistical tools are used to measure the performance of exact and heuristic algorithms. Considering the set of instances adopted as well as the criteria of execution time and quality of the generated approximation set, the experiments showed that the Tabu Search with ejection chain approach obtained the best results and the transgenetic algorithm ranked second. The PLS algorithm obtained good quality solutions, but at a very high computational time compared to the other (meta)heuristics, getting the third place. NSTA and NSGA-II algorithms got the last positions

The informational turn in Philosophy: any novelty in the study of Mind?

The concept of information is analyzed starting from Adams' hypothesis in The Informational Turn in Philosophy, according to which there has been a far-reaching turn in Philosophy following the publication of Turing's article "Computing Machinery and Intelligence". Adams maintains that new guidelines are being indicated in philosophical research, having the concept of "information" as the basis for treatment of classical problems, such as the relationships between mind-body, perception-action, and the nature of knowledge, amongst others. Partially agreeing with Adams, we believe, however, that his hypothesis faces difficulties, the most fundamental of which concerns the different meanings given to the concept of information. We argue that even though the concept of information underlying the mechanicist proposal of Turing, according to which "to think is to compute", is indeed being employed in Philosophy, this is not because of its mechanistic nature, but mainly due to the representationist presupposition dominant in this area. From this point of view, the informational turn in philosophy would not provide any great novelty, given that since the earliest days philosophical approaches to the nature of mind have always been mainly representationist. The novelty would not lie specifically in the Turing thesis, but in reflections on the nature of information, especially ecological information, and its relation to action.

Comunicação em saúde: algumas reflexões a partir da percepção de pacientes acamados em uma enfermaria

Investigam-se imagens e significados sobre experiências vivenciadas por pacientes no processo de atendimento/tratamento em uma enfermaria, visando problematizar questões éticas no cotidiano das práticas de saúde, que possam contribuir para refletir, no espaço da formação profissional, sobre situações que, muitas vezes, se naturalizam pela urgência da rotina. O trabalho consistiu em entregar câmaras fotográficas a cinco pacientes acamados, internados em uma Enfermaria de Ortopedia de um hospital universitário, no segundo semestre do ano de 2001, para que registrassem, pela fotografia, experiências que vivenciavam na condição de pacientes, procurando responder às perguntas: o que significa estar na cama sem poder sair dela? O que é bom e o que é ruim em sua rotina na Enfermaria? Buscando compreender o material pela ótica dos pacientes, apresenta-se aqui parte da experiência registrada e relatada. Os resultados obtidos apontam que entre as maiores dificuldades enfrentadas pelos pacientes entrevistados estão a dependência, gerando constrangimento e desconforto, e a falta de informação, gerando insegurança e ampliando a dependência.

On Fuzzy Implication Classes - Towards Extensions of Fuzzy Rule-Based Systems

Atualmente, há diferentes definições de implicações fuzzy aceitas na literatura. Do ponto de vista teórico, esta falta de consenso demonstra que há discordâncias sobre o real significado de "implicação lógica" nos contextos Booleano e fuzzy. Do ponto de vista prático, isso gera dúvidas a respeito de quais "operadores de implicação" os engenheiros de software devem considerar para implementar um Sistema Baseado em Regras Fuzzy (SBRF). Uma escolha ruim destes operadores pode implicar em SBRF's com menor acurácia e menos apropriados aos seus domínios de aplicação. Uma forma de contornar esta situação e conhecer melhor os conectivos lógicos fuzzy. Para isso se faz necessário saber quais propriedades tais conectivos podem satisfazer. Portanto, a m de corroborar com o significado de implicação fuzzy e corroborar com a implementação de SBRF's mais apropriados, várias leis Booleanas têm sido generalizadas e estudadas como equações ou inequações nas lógicas fuzzy. Tais generalizações são chamadas de leis Boolean-like e elas não são comumente válidas em qualquer semântica fuzzy. Neste cenário, esta dissertação apresenta uma investigação sobre as condições suficientes e necessárias nas quais três leis Booleanlike like — y ≤ I(x, y), I(x, I(y, x)) = 1 e I(x, I(y, z)) = I(I(x, y), I(x, z)) — se mantém válidas no contexto fuzzy, considerando seis classes de implicações fuzzy e implicações geradas por automorfismos. Além disso, ainda no intuito de implementar SBRF's mais apropriados, propomos uma extensão para os mesmos

O circuito espacial da indústria de cerâmica vermelha no seridó potiguar

This research has as an empirical universe, the productive territory of red ware in the Seridó region of Rio Grande do Norte. In the last years this territory has gone through a process of appropriation that has been substantially changing the environmental and social dynamism of the place. However, the industry of red ware has been focusing in some areas, mainly, in the county of Parelhas and Carnaúba dos Dantas. From this point of view, the aim of this work consists in analyze the use of these areas by the red ware industry and the transformations occurred with the expansion of the number of industries and the productivity raise, that requires bigger amounts of earthenware and wood, resources that are low in referred territory. As the result of this process, the suitable alternative has been to acquire inputs in other Rio Grande do Norte counties, as well as in Paraíba counties. To reach the proposed objective, the methodology of this work was consisted of bibliographic and empirical research, regarding the occupation that this activity covers in the Seridó region. From the information obtained during the research, it can be stated that the inputs to the production execution in the red ware industry are acquired in the geographic nearby lands. The analysis of the stages of the production(acquisition of raw material, production and commercialization) showed that the activity acts in a continuous area, having as principal consumer market other northeastern states and the state of Pará. The present study revealed that the pottery activity is set as untenable, because of non-stopping use of the argil and wood, resources that are vanishing from the area, which consume causes a many problems such as deforestation and erosion. Besides, the sale of productive lands for the red ware industries makes harder its good use by the familiar agriculturists in the development of agriculture and cattle raising activity, which for many times is the main economic activity of the place. The precariousness reveals in the constant accidents at work, that most of them are neglected by the local authorities, without any penalty to the industries. Therefore, the industry of red ware in Seridó uses the territory as a resource, leaving its environmental problems that my compromise the quality of life of the actual and future generations

Relevance of Budgerigars (Melopsittacus undulatus) in Experimental Epidemiology of Newcastle Disease.

This study was carried out to clarify the real role that was played by the budgerigars (Melopsittacus undulatus) in the epidemiological plan, under the perspective of its being an infection source of the Newcastle Disease Virus (NDV). For this, the study used Specific-Pathogen-Free chicks (SPF) that were housed with budgerigars that were inoculated with a pathogenic strain (velogenic viscerotropic) of NDV (EID5o =10815/0.1 mL) pathogenic to chickens, by the ocular-nasal via. Each group was composed by 10 SPF chicks and 5 budgerigars. After 5 days of the inoculation of the budgerigars with NDV, SPF chicks were put together with each group of budgerigars, so that there was a direct contact between both species. Cloaca) swabs and blood samples were collected in both species (budgerigars and SPF chicks) after 13 and 19 days post-challenge, respectively, for genome viral excretion by Reverse Transcription Polymerase Chain Reaction (RTPCR) and antibody's search by the inhibition of hemmaglutination test (HI). Budgerigars did not demonstrate any clinical signs of Newcastle Disease (ND). They were refractory to the clinical disease with the NDV. However, antibody titres from inhibition of Hemagglutination (HI) test were detected 9 and 21 days after challenge. Therefore, it was demonstrated the state of carrier of NDV in this species. In SPF chicks allocated with infected budgerigars, NDV genome was detected 13 and 19 days after challenge. Thus, the transmission of the pathogenic virus from the budgerigars to SPF chicks that were housed together was evident until 19 days of the experimental infection with this pathogen. This reveals the importance of the budgerigars from the epidemiological point of view as a potential source of infection of the NDV to commercial chickens that could be raised near this species.

Effect of Superstructure Materials and Misfit on Stress Distribution in a Single Implant-Supported Prosthesis: A Finite Element Analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Maxillary osteosarcoma in a young patient undergoing postorthodontic treatment follow-up: The importance of ongoing oral examinations

Osteosarcoma is a common primary malignant tumor in long bones; it generally occurs in young adults. It is considered infrequent in the head and neck regions, where it is usually associated with poor outcomes and rates of survival. From a histopathologic point of view, osteosarcomas are commonly classified as osteoblastic, chondroblastic, or fibroblastic, although several unusual microscopic subtypes have also been reported. The purpose of this article was to present a case report of a maxillary chondroblastic osteosarcoma involving the maxillary sinus and the maxilla of a young woman who was diagnosed during early postorthodontic treatment follow-up. Treatment, prosthetic rehabilitation, and follow-up details are provided. Most importantly, this patient shows the importance of complete and systematic oral examinations during any routine dental treatment. (Am J Orthod Dentofacial Orthop 2011;139:845-8)