Computação em nuvem no governo: caminhos para a formação de uma agenda governamental

This work aims to understand how cloud computing contextualizes the IT government and decision agenda, in the light of the multiple streams model, considering the current status of public IT policies, the dynamics of the agenda setting for the area, the interface between the various institutions, and existing initiatives on the use of cloud computing in government. Therefore, a qualitative study was conducted through interviews with a group of policy makers and the other group consists of IT managers. As analysis technique, this work made use of content analysis and analysis of documents, with some results by word cloud. As regards the main results to overregulation to the area, usually scattered in various agencies of the federal government, which hinders the performance of the managers. Identified a lack of knowledge of standards, government programs, regulations and guidelines. Among these he highlighted a lack of understanding of the TI Maior Program, the lack of effectiveness of the National Broadband Plan in view of the respondents, as well as the influence of Internet Landmark as an element that can jam the advances in the use of computing cloud in the Brazilian government. Also noteworthy is the bureaucratization of the acquisition of goods to IT services, limited, in many cases, technological advances. Regarding the influence of the actors, it was not possible to identify the presence of a political entrepreneur, and it was noticed a lack of political force. Political flow was affected only by changes within the government. Fragmentation was a major factor for the theme of weakening the agenda formation. Information security was questioned by the respondents pointed out that the main limitation coupled with the lack of training of public servants. In terms of benefits, resource economy is highlighted, followed by improving efficiency. Finally, the discussion about cloud computing needs to advance within the public sphere, whereas the international experience is already far advanced, framing cloud computing as a responsible element for the improvement of processes, services and economy of public resources

Otimização da extração de polissacarídeos sulfatados da alga vermelha Gracilaria birdiae e análise da atividade anticoagulante e antioxidante

The sulfated polysaccharides (SP) from the edible red seaweed Gracilaria birdiae were obtained using five different condition extraction (GB1: Water; GB1p: Water/proteolysis; GB1s: Water/sonication; GB1sp: Water/sonication/proteolysis; GB2s: NaOH/sonication; GB2sp: NaOH/sonication/proteolysis. The yield (g) increased in the following order GB2sp>GB1sp>GB1p>GB2s>GB1s>GB1. However, the amount of SP extracted increased in different way GB2sp>GB1p>GB1>GB1sp>GB1s>GB2s. Infrared and electrophoresis analysis showed that all conditions extracted the same SP. In addition, monosaccharide composition showed that ultrasound promotes the extraction of other polysaccharides than SP. In the prothrombin time (PT) test, which evaluates the extrinsic coagulation pathway, none of the samples showed anticoagulant activity. While in the activated partial thromboplastin time (aPTT) test, which evaluates the intrinsic coagulation pathway, all samples showed anticoagulant activity, except GB2s. The aPTT activity decreased in the order of GB1sp>GB2sp>GB1p>GB1>GB1s>GB2s. Total capacity antioxidant (TCA) of the SP was also affected by condition extraction, since GB2s and GB1 showed lower activity in comparison to the other conditions. In conclusion, the conditions of SP extraction influence their biological activities and chemical composition. The data showed NaOH/sonication/proteolysis was the best condition to extract anticoagulant and antioxidant SPs from Gracilaria birdiae.

Otimização do sistema de supervisão e controle de uma planta de tratamento de resíduos utilizando plasma

A major and growing problems faced by modern society is the high production of waste and related effects they produce, such as environmental degradation and pollution of various ecosystems, with direct effects on quality of life. The thermal treatment technologies have been widely used in the treatment of these wastes and thermal plasma is gaining importance in processing blanketing. This work is focused on developing an optimized system of supervision and control applied to a processing plant and petrochemical waste effluents using thermal plasma. The system is basically composed of a inductive plasma torch reactors washing system / exhaust gases and RF power used to generate plasma. The process of supervision and control of the plant is of paramount importance in the development of the ultimate goal. For this reason, various subsidies were created in the search for greater efficiency in the process, generating events, graphics / distribution and storage of data for each subsystem of the plant, process execution, control and 3D visualization of each subsystem of the plant between others. A communication platform between the virtual 3D plant architecture and a real control structure (hardware) was created. The goal is to use the concepts of mixed reality and develop strategies for different types of controls that allow manipulating 3D plant without restrictions and schedules, optimize the actual process. Studies have shown that one of the best ways to implement the control of generation inductively coupled plasma techniques is to use intelligent control, both for their efficiency in the results is low for its implementation, without requiring a specific model. The control strategy using Fuzzy Logic (Fuzzy-PI) was developed and implemented, and the results showed satisfactory condition on response time and viability

Otimização dos parâmetros de um modelo de bomba em sistemas de bombeio centrífugo submerso

One of several techniques applied to production processes oil is the artificial lift, using equipment in order to reduce the bottom hole pressure, providing a pressure differential, resulting in a flow increase. The choice of the artificial lift method depends on a detailed analysis of the some factors, such as initial costs of installation, maintenance, and the existing conditions in the producing field. The Electrical Submersible Pumping method (ESP) appears to be quite efficient when the objective is to produce high liquid flow rates in both onshore and offshore environments, in adverse conditions of temperature and in the presence of viscous fluids. By definition, ESP is a method of artificial lift in which a subsurface electric motor transforms electrical into mechanical energy to trigger a centrifugal pump of multiple stages, composed of a rotating impeller (rotor) and a stationary diffuser (stator). The pump converts the mechanical energy of the engine into kinetic energy in the form of velocity, which pushes the fluid to the surface. The objective of this work is to implement the optimization method of the flexible polyhedron, known as Modified Simplex Method (MSM) applied to the study of the influence of the modification of the input and output parameters of the centrifugal pump impeller in the channel of a system ESP. In the use of the optimization method by changing the angular parameters of the pump, the resultant data applied to the simulations allowed to obtain optimized values of the Head (lift height), lossless efficiency and the power with differentiated results.

Processos criativos com alunos-atores idosos: caminhos de uma dramaturgia de pertencimento

The present work is to present an experience artistic and pedagogical means of a laboratory-developed with senescent students from their memory files. Unlike other works developed with students of the third age, we make use of the archives of memory, where the drama takes from improvisations developed memories, in other words, the text is built not just recollected by students. Our work, however, is built by a look from the outside. The affective memories narrated by students serve as an engine for text construction and spectacle titled Vamos Falar de Amor. In this experiment the teacher-director also becomes an dramaturgista, and uses her imagination, that also comes filled with her own memories, in order to complete the gaps of the narrative, in a hybrid process in which the collective memory interlace the individual memory, transforming epic into dramatic. Here the route designed to get to the construction of the text and left the text for the second scripture, the spectacle. We want to show that old age is comprised of various hues, and that this phase of human development brings aspects that differ from old to old, and that education and theater can be a resumption of the social role of the elderly in contemporary surroundings. Therefore, the dramaturgy of memory creates the dramaturgy of belonging, facilitating in many aspects the Scenic Play with the elderly ones.

Formação do profissional sanitarista: caminhos e percalços

The public health is a project that struggles for a fair, resolutive and democratic health and that aims to help the collective and social bodies starting from their real needs, being totally involved with inequality and social determination issues. Thus, it is of fundamental importance to form a professional commited to this project. This current study aims to understand the perception of teachers/militants of Public Health about the graduation of Healthcare professionals. Therefore, we look forward answering the following question: Which elements are relevant to the formation of the sanitarian professional? This is a field research, descriptive and exploratory, with a qualitative approach. For data collection, we used a semi-structured interview technique with veteran professionals as sanitarians and teachers of Public Health area. The data were analyzed based on the technique of thematic analysis of subject. This technique consists in structuring the text in units, in categories according analogic reunification. In this sense, were organized three analysis categories, whose titles were guided according to the study objectives, namely: "The Institutional Formation of Sanitarians"; "Elements that contribute to the Sanitarian formation " and "Possible Paths in Sanitarian Formation". Four main elements of sanitarian formation were emphasized: technical capacity to develop a sanitation work, based on three conceptual pillars of Public Health; Framework, foundation and support on Social Sciences, in the social concepts of health; Life history of the student, implication of this with the Public Health object; Field operation, in the territory, directly integrated to the service and the health system. The intervieweds imagine a path to the sanitarian formation: the Public Health should be well explored in its theory and practice in graduation, in any health area and obviously in the graduation of Public Health; the Lato Sensu courses, especially residency, would need a theoretical upgrading, given the creation of undergraduate courses on the area; the Stricto Sensu courses, while forming researchers and teachers in the area, should develop productions involved with the health system and the object of Public Health, in order to bring an effective return, in terms of applicability, in the health system. It is suggested that such a path should be complementary, in a sense of adding knowledge as it travels through graduation, postgraduation Lato Sensu and post-graduation Stricto Sensu. The idea, in general, is that the graduate-residence set / specialization-mastering / PhD compose a linear formation, ascending and complementary. To follow all this process effectively, it is necessary, and urgent, to think of regulation strategies of the formating procedures. It is also recommended that more studies are conducted in this area, specially a more careful evaluation of the undergraduate courses in Public Health, which is a current and relatively new issue on formation in the area.

Caminhos para a avaliação da formação em odontologia: desenvolvimento, validação e aplicação de critérios

The need for universal access to health and the failure of the pedagogical model centered on the transmission of knowledge has led to changes in the training of health professionals. The objective of this study was to provide a new alternative for evaluating dental students through the development, validation and application of evaluation criteria based on the National Curriculum Guidelines (DCN in Brazil). Therefore, the study was conducted in three phases: development and validation of evaluation criteria of Dentistry courses based on the DCN; a pilot study to verify the applicability of the validated criteria and evaluation of the dentistry courses in the Northeast. In the first stage, a logical model was formulated, allowing for the construction of a criteria matrix, validated by a modified Delphi consensus technique. The validated matrix has the following dimensions: Profile of graduates, health care guidance, teaching and service integration, and pedagogical approach. The pilot study was conducted in five dental courses through a documentary study of the pedagogical project course (PPC), and application of validated questionnaires and interviews with course coordinators. The results of the pilot study indicate the possibility of being verified by means of validated criteria and using different methodological proposals, advances and curricular limitations facing the proposed reorientation of training recommended by DCN. The evaluation of Northeast Dentistry courses was carried out by applying a questionnaire validating a matrix of 30 course coordinators, including public and private institutions. The data were submitted to descriptive analysis, and also tested the difference between means and the correlation between the assessment of the coordinators in the dimensions and sub-dimensions with each other, among the general evaluation of courses and between the following variables: administrative category, time since last curriculum updating, participation in reorienting the training of health professionals programs, ENADE and CPC (Preliminary Concepts of the Course) scores in the year 2013. Positive correlation (p <0.01) was found between the means obtained by the perception of the coordinators in most dimensions, and also between them and the overall performance of the course. There were no significant differences between the coordinators’ perception about course performance and the administrative category (public / private). This difference is slightly higher when the average performance is compared with respect to time due to the last curriculum update, getting better performance in courses with the latest updated curriculum, even with there not 11 being this significant difference between dimensions. Better averages of performance were obtained in courses that do not participate in reorientation programs of professional training, with a significant difference (p<0.05) for the overall score and for all dimensions except the dimensions of teaching-service Integration (p = 0.064). There was no significant correlation between the assessment of coordinators in all dimensions, in the overall assessment or ENADE and CPC scores in 2013. The final instrument proposed in this study is a different alternative assessment for health training of both dentists and other professionals, considering that the DCN providing for the training and graduation of professionals is focused on the health needs of the population, integrated with the SUS (the National Brazilian Health System) and based on student-centered learning.

Semeando a cultura audiovisual no Rio Grande do Norte: a experiência das oficinas de vídeos do Coletivo Caminhos, Comunicação & Cultura

The audiovisual media is an instrument of communication that plays an important role in the cultural, social and political understanding of society. This survey was done intenting to identify the contribution of the audiovisual media to the culture in the Rio Grande do Norte and trying to understand the process of producing audiovisual in this state. To reach the aim, a case report was done regard the activities of Caminhos, Comunicação & Cultura – CC&C – a group that conducts cultural activities in the state since 2006 and has 76% of its activities related to audiovisual production, in which 47% of them, are video workshops. The video workshop project "Sowing Culture", held by the group in the city of Venha Ver/RN in January 2013, was observed and analised from its conception to its realization. The research pursued to reveal how the initiatives of independent producers, such as the CC&C group, can promote the access to audiovisual culture in regions where such knowledge is limited or nonexistent, due to the poor state policies related to the culture. Methodologically, the research was structured by performing a historical and descriptive analysis of hypothetical-deductive method through participant observation. For the conceptual and theoretical development, it was addressed the Sociability, Ethnography and media activism. The research proved that the independent audiovisual producers are promoting changes in the RN audiovisual practices. Before the background featured in the research, it is proposed a prognostic from researching to opening the RN Audiovisual Observatory, a communicational tool projected as space of sharing information, thinking, speaking, contacting and promoting the audiovisual productions of the state.

Avaliação do acesso aos serviços de reabilitação física para vítimas de acidentes de trânsito: caminhos para melhoria da qualidade do sistema de saúde

The Physical Rehabilitation services (PR) are of fundamental importance in combating the global epidemic of Traffic Accidents (TA). Considering the numerous physical and social consequences of the survivors, quality problems in access to PR are a hazard to recovery of victims. It is necessary to improve the management of quality of services, assessing priority dimensions and intervening in their causes, to ensure rehabilitation available in time and suitable conditions. This study aimed to identify barriers to access to rehabilitation considering the perception of TA victims and professionals. The aim is also to estimate the access to rehabilitation and their associated factors. This is a qualitative and quantitative study of exploratory nature developed in Natal / RN with semi-structured interviews with 19 health professionals and telephone survey to 155 victims of traffic accidents. To explore barriers to access the speeches were transcribed and analyzed using the Alceste software (version 4.9). During the interviews used the following guiding question: “What barriers hinder or prevent access to physical rehabilitation for victims of traffic accidents?”. The names of classes and axes resulting from Alceste was performed by ad hoc query to three external researchers with subsequent consensus of the most representative name of analysis. We conducted multivariate analysis of the influence of the variables of the accident, sociodemographic, clinical and assistance on access to rehabilitation. Associations with p <0.20 in the bivariate analysis were submitted to logistic regression, step by step, with p <0.05 and confidence interval (CI) of 95%. The main barriers identified were: “Bureaucratic regulation”, “Long time to start rehabilitation”, “No post-surgery referral” and “inefficiency of public services”. These barriers were divided into a theoretical model built from the cause-effect diagram, in which we observed that insufficient access to rehabilitation is the product of causes related to organizational structure, work processes, professional and patients. Was constructed two logistic regression models: “General access to rehabilitation” and “Access to rehabilitation to public service”. 51.6% of patients had access to rehabilitation, and 32.9% in public and 17.9% in the private sector. The regression model “General access to rehabilitation” included the variables Income (OR:3.7), Informal Employment (OR:0.11), Unemployment (OR:0.15), Perceived Need for PR (OR:10) and Referral (OR: 27.5). The model “Access to rehabilitation in the public service” was represented by the “Referral to Public Service” (OR: 23.0) and “Private Health Plan” (OR: 0.07). Despite the known influence of social determinants on access to health services, a situation difficult to control by the public administration, this study found that the organizational and bureaucratic procedures established in health care greatly determine access to rehabilitation. Access difficulties show the seriousness of the problem and the factors suggest the need for improvements in comprehensive care for TA survivors and avoid unnecessary prolongation of the suffering of the victims of this epidemic.

Otimização do controle do diagrama de radiação de radares de varredura para rastreio de foguetes usando o método GAMMC para o Caso Planar (GAMMC-P)

Launching centers are designed for scientific and commercial activities with aerospace vehicles. Rockets Tracking Systems (RTS) are part of the infrastructure of these centers and they are responsible for collecting and processing the data trajectory of vehicles. Generally, Parabolic Reflector Radars (PRRs) are used in RTS. However, it is possible to use radars with antenna arrays, or Phased Arrays (PAs), so called Phased Arrays Radars (PARs). Thus, the excitation signal of each radiating element of the array can be adjusted to perform electronic control of the radiation pattern in order to improve functionality and maintenance of the system. Therefore, in the implementation and reuse projects of PARs, modeling is subject to various combinations of excitation signals, producing a complex optimization problem due to the large number of available solutions. In this case, it is possible to use offline optimization methods, such as Genetic Algorithms (GAs), to calculate the problem solutions, which are stored for online applications. Hence, the Genetic Algorithm with Maximum-Minimum Crossover (GAMMC) optimization method was used to develop the GAMMC-P algorithm that optimizes the modeling step of radiation pattern control from planar PAs. Compared with a conventional crossover GA, the GAMMC has a different approach from the conventional one, because it performs the crossover of the fittest individuals with the least fit individuals in order to enhance the genetic diversity. Thus, the GAMMC prevents premature convergence, increases population fitness and reduces the processing time. Therefore, the GAMMC-P uses a reconfigurable algorithm with multiple objectives, different coding and genetic operator MMC. The test results show that GAMMC-P reached the proposed requirements for different operating conditions of a planar RAV.

Desenvolvimento da célula base de microestruturas periódicas de compósitos sob otimização topológica

This thesis develops a new technique for composite microstructures projects by the Topology Optimization process, in order to maximize rigidity, making use of Deformation Energy Method and using a refining scheme h-adaptative to obtain a better defining the topological contours of the microstructure. This is done by distributing materials optimally in a region of pre-established project named as Cell Base. In this paper, the Finite Element Method is used to describe the field and for government equation solution. The mesh is refined iteratively refining so that the Finite Element Mesh is made on all the elements which represent solid materials, and all empty elements containing at least one node in a solid material region. The Finite Element Method chosen for the model is the linear triangular three nodes. As for the resolution of the nonlinear programming problem with constraints we were used Augmented Lagrangian method, and a minimization algorithm based on the direction of the Quasi-Newton type and Armijo-Wolfe conditions assisting in the lowering process. The Cell Base that represents the composite is found from the equivalence between a fictional material and a preescribe material, distributed optimally in the project area. The use of the strain energy method is justified for providing a lower computational cost due to a simpler formulation than traditional homogenization method. The results are presented prescription with change, in displacement with change, in volume restriction and from various initial values of relative densities.

Otimização de parâmetros mecânicos e microestruturais dos moldes em areia de sílica ligados quimicamente pelo processo de cura a frio em fundição de aço

Surface defects on steel parts borne costs of smelting industries due to the need of rework. Sand molds are frequently used in foundry industries and largely responsible for providing surface defects. This study aims to optimize the levels of the molding process variables to minimize the occurrence of surface defects in steel castings in silica sand molds chemically linked by cold cure process. The methodology used the experimental design with split plot, being considered in the study the resin percentage factors in the mold formulation, addition of iron oxide, type of paint, the paint application method, amount of ink layers, use of hot air along the lines and waiting time of the mold before casting. They were analyzed as response variables erosion defects, sand inclusion, penetration, porosity and surface finish. Tensile strength tests were performed to evaluate the influence of factors on mechanical parameters and the microstructural parameters were carried out the analysis of X-ray diffraction, scanning electron microscopy (SEM) and thermal analysis (TG / DSC / dilatometry). The results elucidate that for the faulty erosion, the only significant factor with a 95% confidence level was the type of ink and the ink alumina-based superior results obtained. For the sand inclusion of defect, there were three significant factors, with best results obtained with alumina-based paint and spray applied using hot air in the mold before casting the metal. For the defect penetration, there were four significant factors, the best results being achieved with 0.8% of resin and addition of iron oxide in the molding formulation, the paint being applied by brush and standby time of 24 hours before leak. For the defect porosity with a 95% confidence level, no significant factors. For the defect surface finish, the best results were achieved with the 0.8% formulation of the resin in the mold and application of the paint brush. To obtain the levels of the factors that optimize all defects simultaneously, we performed a weighted average of the results of each type of fault, concluding that the best levels of the factors were: 0.8% resin and addition of iron oxide in the formulation of the template, application of two coats of paint applied with a brush or spray, using hot air in the mold before casting and 24 hours of waiting ready the mold before casting. These levels of the optimized factors were used in an experiment to confirm that ratified the results, helping to reduce rework and consequently reducing costs of cast steel parts.

Aplicação e otimização de métodos eletroquímicos combinados para remoção e determinação de cromo hexavalente em efluentes simulados

Hexavalent chromium is a heavy metal present in various industrial effluents, and depending on its concentration may cause irreparable damage to the environment and to humans. Facing this surrounding context, this study aimed on the application of electrochemical methods to determine and remove the hexavalent chromium (Cr6+) in simulated wastewater. To determine was applied to cathodic stripping voltammetry (CSV) using ultra trace graphite electrodes ultra trace (work), Ag/AgCl (reference) and platinum (counter electrode), the samples were complexed with 1,5- diphenylcarbazide and then subjected to analysis. The removal of Cr6+ was applied electrocoagulation process (EC) using Fe and Al electrodes. The variables that constituted the factorial design 24, applied to optimizing the EC process, were: current density (5 and 10 mA.cm-2), temperature (25 and 60 ºC), concentration (50 and 100 ppm) and agitation rate (400 and 600 RPM). Through the preliminary test it was possible the adequacy of applying the CSV for determining of Cr6+, removed during the EC process. The Fe and Al electrodes as anodes sacrifice showed satisfactory results in the EC process, however Fe favored complete removal in 30 min, whereas with Al occurred at 240 min. In the application of factorial design 24 and analysis of Response Surface Methodology was possible to optimize the EC process for removal of Cr6+ in H2SO4 solution (0.5 mol.L-1), in which the temperature, with positive effect, was the variable that presented higher statistical significance compared with other variables and interactions, while in optimizing the EC process for removal of Cr6+ in NaCl solution (0.1 mol.L-1) the current density, with positive effect, and concentration, with a negative effect were the variables that had greater statistical significance with greater statistical significance compared with other variables and interactions. The utilization of electrolytes supports NaCl and Na2SO4 showed no significant differences, however NaCl resulted in rapid improvement in Cr6+ removal kinetics and increasing the NaCl concentration provided an increase in conductivity of the solution, resulting in lower energy consumption. The wear of the electrodes evaluated in all the process of EC showed that the Al in H2SO4 solution (0.5 mol.L-1), undergoes during the process of anodization CE, then the experimental mass loss is less than the theoretical mass loss, however, the Fe in the same medium showed a loss of mass greater experimental estimated theoretically. This fact is due to a spontaneous reaction of Fe with H2SO4, and when the reaction medium was the NaCl and Na2SO4 loss experimental mass approached the theoretical mass loss. Furthermore, it was observed the energy consumption of all processes involved in this study had a low operating cost, thus enabling the application of the EC process for treating industrial effluents. The results were satisfactory, it was achieved complete removal of Cr6+ in all processes used in this study.

Trajetórias construídas em caminhos (não) planejados: os sentidos formativos da escrita no estágio supervisionado obrigatório do curso de Pedagogia da UFMA

This research is taking as study aim the mediatory teaching action, its involvement with educational guidance reports of Supervised Obligatory Student Teaching in curriculum managing by formal teachers is more related to the form as each one understands the mediatory action of the pedagogy teaching activities than to the adherence of a common project, that is: the Course Pedagogy Project (CPP). Thus, our aim is meant to understand the attribution from the formal teachers to curriculum managing process, having as forms its action in the supervised obligatory student teaching at UFMA Pedagogy Course. On one side, we look for traces about established relation by them between their professional experience and their report guidance in current course. On the other hand, a research concern comes up to us on the forming meaning of the report writing by UFMA Pedagogy Teachers Course. In order to do that, we used interviews interpreted by means of methodology understanding interview. Starting from oral speeches, we understand that the managing formation in this course is linked to postures not identical and adjustable to conditions the teachers have access. We identify a curriculum subject group and a group that by their conformation adapted is considered as object group of curriculum practices. As for the mediatory action in writing formation process, we noticed that they contribute to teacher information at UFMA in the reflexive critic perspective and or in the bureaucratic reproduction perspective. The report writing at the end of the Supervised Obligatory internship is characteristic of quality quantity assessment display, as bureaucratic process and as reflexive display and didactic pedagogy activity intervention. We defend that the teachers´ guidance under critical reflections, where the writing has a social role, must overcome individual dimension, they must be debated as collective and organized practices. We hope to contribute with such a research on teacher mediatory actions and their implementing with help of reporting writing guidance in the Supervised Obligatory Student Teaching in the Curriculum Teacher managing process.

Comparação de modelos estáticos, otimização dos determinantes da estrutura de capital das PME's portuguesas

Dissertação, Mestrado, Contabilidade e Fiscalidade, Instituto Politécnico de Santarém, Escola Superior de Gestão e Tecnologia, 2016