Remediação de solos contaminados com óleo diesel utilizando um sistema de lavagem com microemulsão

The underground reservoirs of fuel retailing system represent an environmental threat, because once in bad conservation, these tanks allow fuel leakage and infiltration. For soil contaminated with fuel, such as diesel oil, the present study introduces the microemulsion systems used by the method of washing. In tests carried out in column with a sample of sandy soil artificially contaminated and previously characterized as to its void level to porosity, to permeability which is an important parameter concerning the study of the method of washing. While microemulsions were characterized for their viscosity and wettability, a variation of active matter was also done departing from the original formulation. The hydraulic diffusivity of the microemulsion was studied so as the injection of such fluid in a soil with sandy characteristics. The results of the extractions revealed the excellent performance of these systems which get to remove around 95% of diesel fuel. This proves the efficiency of the microemulsion in the process of removal of diesel fuel from the soil with the advantage of being a system easily obtainable and less aggressive to the environment when compared to organic solvents.

Qualidade pós-colheita de goiabas 'Branca de Kumagai', tratadas com cloreto de cálcio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de sistemas microemulsionados utilizando água do mar na recuperação avançada de petróleo

Petroleum exists in the nature in certain underground formations where it is adsorbed into the rocks pores. For the conventional recovery methods usually only 30% of the oil is extracted and this can be credited, basically, to three aspects: high viscosity of the oil, geology of the formation and high interfacial tensions between the reservoir s fluids. The enhanced recovery methods use the injection of a fluid or fluids mixture in a reservoir to act in points where the conventional process didn't reach the recovery rates. Microemulsion flooding, considered an enhanced method, has the purpose to desorb the oil from the rock formation and to attain an efficient displacement of the oil emulsion. With this in mind, this work was accomplished with two main objectives: the study of the parameters effect that influence a microemulsified system (surfactant and cosurfactant types, C/S rate and salinity) and the evaluation of displacement efficiency with the microemulsions that showed stability in the rich aqueous area. For the analyzed parameters it was chose the microemulsions composition used in the recovery stage: 25% water, 5% kerosene, 46.7% of butanol as cosurfactant and 23.3% of BC or SCO cosurfactant. The core plugs of Assu and Botucatu sandstones were appraised in porosity and permeability tests and then submitted to the steps of saturation with seawater and oil, conventional recovery with water and enhanced recovery with the selected microemulsions. The Botucatu sandstone presented better recovery parameters, and the microemulsion composed with BS surfactant had larger recovery efficiency (26.88%)

Extração, caracterização e aplicação do corante de urucum (Bixa orellana L.) no tingimento de fibras naturais

The increasing demand for natural dyes in place of synthetic ones is justified by the non-toxicity or low toxicity of the former. The synthetic dyes are associated with diseases like cancer as well as when released in the environment takes longer to degrade and the intermediates could be still more toxic. The Annatto (Bixa Orellana L.) is a carotenoid and one of the more important natural dyes used in the food industry. In the form of dye, it represents nearly 70% of the world natural dye production and 90% in Brazil. In the present work, annatto seeds were used of the species peruana paulista, which had nearly 2.1% of bixin. The process of dye extraction with ethyl alcohol showed 4% of dye in the form of powder with particle diameter of 28mm. The extraction process did not alter the chemical composition of the dye, which was confirmed by the electronic spectrum of absorption. Dyeings were carried out with different mordents to study the total colour difference as well as the wash fastness properties and friction fastness properties under wet and dry conditions. The samples treated with copper sulphate showed colour difference but at the same time showed better fastness results. The samples treated with resin (no formaldehyde) did not alter the colour significantly still better the fastness properties. From the results, it could be stated that the resin could be an alternative for heavy metallic mordents

Desenvolvimento de um secador spray para obtenção de pós finos de precursores de nióbio

This work presents a spray-dryer designed to oxalate-niobate precursors and suitable for the production of Niobium Carbide. The dryer was intended to produce powders of controlled particle size. First, the precursor is dissolved in water to produce a solution of known concentration and then it is atomized on the spray-dryer to produce the powder. This equipment consists of a 304 stainless steel chamber, 0.48 m x 1.9 m (diameter x length), with a conical shape at the lower portion, which is assembled on a vertical platform. The chamber is heated by three 4 kW electrical resistances. In this process, drying air is heated as it flows inside a serpentine surrounding the chamber, in contrary to more traditional processes in which the hot drying air is used to heat the component. The air enters the chamber at the same temperature of the chamber, thus avoiding adherence of particles on the internal surface. The low speed flow is concurrent, directed from the top to the bottom portion of the chamber. Powders are deposited on a 0.4 m diameter tray, which separates the cylindrical portion from the conical portion of the chamber. The humid air is discharged though a plug placed underneath the collecting tray. A factorial experimental planning was prepared to study the influence of five parameters (concentration, input flow, operation temperature, drying air flow and spray air flow) on the characteristics of the powders produced. Particle size distribution and shape were measured by laser granulometry and scanning electronic microscopy. Then, the powders are submitted to reaction in a CH4 / H2 atmosphere to compare the characteristics of spray-dried powders with powders synthetizided by conventional methods

Avaliação do comportamento de fluidos micelares na recuperação avançada de petróleo

In heavy oil fields there is a great difficulty of the oil to flow from the reservoir to the well, making its production more difficult and with high cost. Most of the original volumes of oil found in the world are considered unrecoverable by the use of the current methods. The injection of micellar solutions has a direct action in the oil interfacial properties, resulting in an enhanced oil recovery. The objective of this research was the study and selection of micellar solutions with ability to decrease the interfacial interactions between fluids and reservoir formation, increasing oil production. The selected micellar solutions were obtained using commercial surfactants and surfactants synthesized in laboratory, based on the intrinsic properties of these molecules, to use in the enhanced oil recovery. Petroleum Reservoirs were simulated using sandstone plugs from Botucatu formation. Experiments with conventional and enhanced oil recovery techniques were accomplished. The obtained results showed that all micellar solutions were able to enhance oil recovery, and the micellar solution prepared with a SB anionic surfactant, at 2% KCl solution, showed the best recovery factor. It was also accomplished an economic analysis with the SB surfactant solution. With the injection of 20% porous volume of micellar solution, followed by brine injection, the increment in petroleum recovery can reach 81% recovery factor in the 3rd porous volume injected. The increment in the total cost by the addition of surfactant to the injection water represents R$ 7.50/ton of injected fluid

Desenvolvimento de tensoativos e sistemas microemulsionados para recuperação de petróleo

The high concentration of residual oil is one of the greatest problems found in petroleum mature fields. In these reservoirs, different enhanced oil recovery methods (EOR) can be used, highlighting the microemulsion injection. The microemulsion has showed to be efficient in petroleum recovery due to its ability to promote an efficient displacement of the petroleum, acting directly in the residual oil. In this way, this research has as objective the study of microemulsion systems obtained using a commercial surfactant (TP), determining microemulsion thermal stabilities and selecting points inside the pseudoternary phases diagram, evaluating its efficiencies and choosing the best system, that has the following composition: TP as surfactant (S), isopropyl alcohol as co-surfactant (C), kerosene as oil phase, water as aqueous phase, C/S ratio = 1, and 5% sodium p-toluenesulfonate as hydrotope; being observed the following parameters for the selection of the best pseudoternary phases diagram: C/S ratio, co-surfactant nature and addition of hydrotope to the system. The efficiency in petroleum recovery was obtained using two sandstone formation systems: Assu and Botucatu. The study of thermal stabilities showed that as the concentration of active matter in the system increased, the thermal stability also increased. The best thermal stability was obtained using point F (79.56 0C). The system that presented the best recovery percentile between the three selected (3) was composed by: 70% C/S, 2% kerosene and 28% water, with 94% of total recovery efficiency and 60% with microemulsion injection, using the Botucatu formation, that in a general way presented greater efficiencies as compared with the Assu one (81.3% of total recovery efficiency and 38.3% with microemulsion injection)

Viabilidade técnica de uma rota não convencional para a produção de leite de cabra em pó em cooperativas do Rio Grande do Norte

Nowadays, Brazil has both the greatest goat herd and the greatest goat milk production of South America. The state of Rio Grande do Norte, located in northeast of Brazil, has an average year production of three thousand cubic meters of goat milk in natura. Part of this milk production is homemade and it comes from small farms, which unite in rural cooperatives created to encourage the production and implementation of industrial processes for preservation and processing of milk. Results presented by literature and obtained from preliminary essays in this thesis show that non conventional dryer of spouted bed with inert particles is able to produce powder milk from in natura milk (cattle or goat), with the same quality of spray dryer, however, operating at low cost. The method of drying in spouted bed consists of injecting milk emulsion on the bed of inert particles gushed by hot air. This emulsion covers the particles with a thin film, which dries and is reduced to powder during the circulation of inerts inside the bed. The powder is dragged by exhaustion air and separated in the cyclone. The friction among particles resulted from the particles circulation, encourages high taxes of shear in the thin film of emulsion, breaking the cohesive forces and making this process possible. Studying the drying process and the powder goat milk production in one unit of spouted bed with inert particles, seeing the development of a low cost technological route for powder milk production is the aim of this thesis. The powder milk produced by this route must attend the local demand of food industries which need an intermediate product to be used as a food ingredient (ice-cream, milk candy). In order to reach this aim, this thesis approaches the aspects related to physical, thermodynamics and physic-chemicals characteristics of goat milk, whose complete data are still inexistent in the literature. The properties of materials are of great importance to the project of any process which involves the operations of transportation of movement, heat and mass quantity, such as the dryers which operate in fluid dynamically active regime, like the spouted bed. It was obtained new data related to the goat milk properties in function of concentration of solids and temperature. It is also important to mention the study developed about the kinetic of solids retention in the bed of inert particles during the drying of goat milk. It was found more adequate processes conditions to the proposed technological route to be implemented in small and micro-industries, with simplifications in the system of milk injection as well as in the form of operation of the dryer. Important data were obtained for a posterior stage of this research which involves the v modeling, simulation, control and optimization of the process. The results obtained in this thesis, in relation to process performance as well as to the quality of produced powder milk validate the proposal of using the spouted bed dryer in the production of powder goat milk

Utilização de membranas no pós-tratamento de esgotos para reuso do permeado e aproveitamento do concentrado

The use of membrane filters in the post-treatment of sewage has been increasingly employed to obtain water quality, applicable to various forms of reuse. Despite the advantages presented using the permeate membranes, such as saving water and reducing water pollution, the concentrate generated in the process ends up being an inconvenience to the deployment of this technology due to lack of sustainable solutions for their management. Thus, the main objective of this research was to evaluate the use of membranes for microfiltration, ultrafiltration, nanofiltration and reverse osmosis concentrated in agriculture, using it as liquid fertilizer. The permeated membranes were also assessed in order to identify activities in which they could be reused. Five configurations were established from four types of membranes, so that each configuration represents a different system. The tests were conducted in batch mode, with triplicate for each configuration. The results indicated that permeated the microfiltration and ultrafiltration can be used in urban areas, in non-potable uses. Have the nanofiltration permeate can be reused in the industry, replacement cooling towers, and other non -potable uses required in the manufacturing unit. The permeate obtained in reverse osmosis met the intended uses for nanofiltration as well as the standards required for boiler feed, adding alkalizing being required to raise the pH to the recommended value. Concentrates generated in nanofiltration and reverse osmosis can be availed as liquid fertilizer in agriculture, but they must be diluted in the irrigation water, in order to adjust the salt concentration allowed for the least tolerant crops patterns

Educação científica no contexto pós-ontológico: por uma concepção plural de conhecimento e educação

The development of this work arises from the research of sociological and philosophical characters contemplating also other approaches which aims to answer the followingquestions: what is the responsibility of science teaching for the image one has about science? ; which scientific education should be designed for nowadays? . After considering the assumptions brought along by rationalism and the criticisms to the illuminist model proposed by sociology and philosophy of science, as well by the biology of the knowing process, going through discussions concerning post-modernity issues, one is given to understand that the image of science has become the central point of discussion in the last hundred years, including what concerns the area of science teaching, and that practically none of those discussions really reached natural science classes indeed. We adopt the term postontological to characterize the recent proposals on philosophy and sociology, because we evaluate that this term allows a better identification of the scientific realism crisis, which supports the existence of an ontological domain which science, and only science, is able to understand. One notices that the general public is not aware of those discussions, mainly if they are science teachers and students. So we believe that discussing the logic in which science is structured, the new understandings concerning the scientific undertaking, especially those of an externalist character, and the relationship between science and society, all of this contributes to build up a science teaching which contemplates a reflective contribution, besides allowing the inclusion of the study of other epistemologies in the educational practice. We argue that a revisionist posture seems to be the most appropriate for the contemporary scientific education, contemplating, besides the teaching of the usual science contents, discussions on the issues involving that knowledge, as well as respecting epistemologies alternative to the modern Western scientific one, in order one can work on the perception of local knowledge generated from other epistemological bases. We describe here practical activities we did involving teachers (short-term courses) and high-school students in an inland school in the Rio Grande do Norte state, in Brazil, as a way to demonstrate the possibility of interventions which can take those conceptions, discussions and changes to the classroom

A formação pós-graduada em ensino de ciências naturais e matemática de docentes do IFRN: implicações na atuação docente

This research part of the educational context of the Federal Rio Grande do Norte, through the resumption of legal frameworks that characterize it as an institution belonging to the Federal Network of Professional Education and Technology Brazilian, with a focus on continued education policies for the servers who work there specifically teachers, especially those who have their work in the Teaching of Natural Science and Mathematics. To do this the cut in an agreement between the IFRN and UFRN PPGECNM through the professional master's degree Teaching of Natural Sciences and Mathematics. This agreement as we have research collaborators 08 master teachers who graduated in the period 2004 to 2010, so we undertook a qualitative and quantitative research aimed to conduct the study in general terms of description and analysis of the impacts caused by the formation of masters IFRN in PPGECNM UFRN, taking into account the production of the same academic (dissertation), his performance in the context of the institution and the historical, social, economic and political aspects involved, and also meet the guidelines of the project at the Observatory in 2008 - MEC / CAPES / BSD-P. We used the theoretical options methodological elements of Comprehensive Interview and multireferentiality, our data collection instrument was the main interview, we also performed the analysis of dissertations by lecturers and teachers featured, from the specific descriptors used in catalogs USP / IFUSP (1992, 1996) and UNICAMP / FE / CEDOC (1998) and by other researchers. In analyzing and understanding the speech of the interviewees were able to identify the implications of teacher education in the school context, the motivation to seek the Master; how was the construction of the object of study of the educational product and its use in teaching practice and intervention, the question of the role of master teachers in the school environment to the post master taking into account changes in professional performance and influence in the working groups, how does the use of research and investigation in the classroom after training and between training and educational quality in the context of IFRN. In reading and analysis of the dissertations were able to identify the main focus and under-explored thematic focus as well as the theoretical methodological references. At the end of the research developed a product that could be used for technical analysis studies and assessment in quantitative terms the results achieved by the master teachers IFRN through his training in PPGECNM UFRN

Propriedades mecânicas do músculo de ratos adultos e idosos, exercitado pós-imobilização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ventilação mecânica não-invasiva no pós-operatório de cirurgia cardíaca: atualização da literatura

Este estudo objetivou atualizar os conhecimentos em relação à utilização da ventilação mecânica não-invasiva (VMNI) no pós-operatório de cirurgia cardíaca e identificar se há indícios da superioridade de uma forma de modalidade de VMNI em relação à outra. Foi realizada revisão da literatura entre 2006 a 2011, a partir das bases de dados PubMed, SciELO e Lilacs, utilizando os descritores respiração artificial, pressão positiva contínua nas vias aéreas, ventilação com pressão positiva intermitente e cirurgia cardíaca, e seus correspondentes na língua inglesa, os quais foram pesquisados em cruzamentos. A partir dos critérios adotados, foram selecionados nove artigos, dos quais seis demonstraram aplicações de VMNI, por meio de modalidades como pressão positiva contínua nas vias aéreas, pressão positiva com dois níveis pressóricos e respiração com pressão positiva intermitente, no pós-operatório de cirurgia cardíaca, e, três realizaram comparações entre as diferentes modalidades. As modalidades de VMNI descritas na literatura foram utilizadas com resultados satisfatórios. Estudos que comparam diferentes modalidades são escassos, contudo alguns demonstraram superioridade de uma modalidade de VMNI, como é o caso da respiração com pressão positiva intermitente na reversão da hipoxemia e da pressão positiva com dois níveis pressóricos na melhora da oxigenação, da frequência respiratória e frequência cardíaca desses pacientes, em comparação a outras modalidades.

Métodos de recuperação pós-exercício: uma revisão sistemática

A recuperação pós-exercício consiste em restaurar os sistemas do corpo a sua condição basal, proporcionando equilíbrio e prevenindo a instalação de lesões e, nesse sentido, torna-se aspecto importante de todo programa de condicionamento físico, em quaisquer níveis de desempenho, mas, sobretudo nos mais elevados. O objetivo desta revisão foi reunir informações e descrever as respostas proporcionadas por métodos recuperativos pós-exercício, como crioterapia, contraste, massagem e recuperação ativa, constituindo uma fonte de atualização do referido tema. Utilizaram-se os bancos de dados MedLine, Scielo e Lilacs, como lista de periódicos, o SportsDiscus. Foram incluídos no estudo somente ensaios clínicos randomizados controlados e não-controlados, além de artigos de revisão referentes ao tema proposto. Optou-se por procurar os termos: cryotherapy, massage, active recovery, thermotherapy, immersion e exercise, individualmente e em cruzamentos. Como achado, observou-se que alguns estudos relatam que a crioterapia é prejudicial em se tratando de recuperação pós-exercício, pois reduz o desempenho imediatamente após a aplicação da técnica. Por outro lado, estudos apontam como sendo benéfica, pois reduzem o nível de creatinaquinase após alta intensidade de esforço, evitando danos musculares. Para o contraste, embora apresente significância em se tratando de remoção de lactato sanguíneo, sua efetividade necessita ser mais bem discutida. Na massagem e na recuperação ativa, os principais vieses descritos dizem respeito à pressão exercida e à intensidade do exercício, respectivamente. Entre as técnicas, as que parecem ter efeitos semelhantes são o contraste e a recuperação ativa, no que tange à remoção de lactato e diminuição da creatinaquinase. Ressalta-se que o tempo de exposição é de fundamental importância para todos os métodos. Entretanto, diversos estudos não se propõem a identificar os reais efeitos fisiológicos promovidos pelas técnicas, utilizando-as de modo inipiente. Portanto, a inconsistência dos resultados encontrados sugere que a análise das variáveis utilizadas como método de recuperação deve ser mais bem controlada.

Relações entre mídia e lazer:o capitalismo, os meios e a apropriação do tempo livre nas sociedades industrial e pós-industrial

This research aims to understand the relationship between media, capitalism and ownership of free time for leisure practices in industrial societies and postindustrial. Searching is thus a conceptual framework that takes into account the kind of ideology that naturalizes the relationship of leisure with the foundations of contemporary media, and the media only with leisure, forgetting their insertion in the labor and industrial relations in society. We intend to demonstrate that every mode of production, in the capitalist system, entails a mode of reproduction. Methodologically, this is a first approximation, from theoretical concerns already performed, constituting a theoretical research, bibliographic and descriptive character. The results of the text drives us to the conclusion that the work and leisure spheres tend to be less and less differentiated, since both remain as activities of product management with the same intellective protocols, based on information and communication technology, and that accordingly, the media favors an expansion of productive activity even during leisure time