Purchasing and supply management capabilities in Finnish medium-sized enterprises

Purchasing and supply management (PSM) has become increasingly important for companies to survive in current highly competitive market. Increased outsourcing has extended the role of PSM, making external resource management and supplier relationships critical success factors in business. However, the recent research has mainly concentrated on large enterprises. Therefore the PSM issues related to medium-sized enterprises represent a significant research area. The thesis aims to explore the status and role of PSM in Finnish medium-sized firms, understand how strategic companies consider PSM to be, clarify what are the competence requirements for PSM professionals, and increase the understanding of PSM capabilities needed from the points view of individual competence and organisational capabilities. The study uses data that was collected in 2007 from purchasing executives at the director/CEO level representing a sample of 94 Finnish firms. 54 % of the respondent enterprises had a supply strategy. The total supply cost was on average 60 % of firms' turnover. Centralisation of PSM and outsourcing of logistics will increase in Finnish medium-sized enterprises. The findings point out that Finnish medium-sized enterprises had strategical features of PSM. However, Finnish firms have not concentrated on making strategies that relate to PSM. The elements that explain the existence of a supply strategy could be found in this study. It can be concluded from this study that there is an advantageous base for the development of strategic PSM, because nearly all the enterprises were of the opinion that PSM capabilities have an effect on business success. When reviewing the organisational capabilities, the five most important development elements were supplier relationships, both operational and strategic processes, time management, and personnel's competence. Training in internationalisation, strategic management, and communication could help to improve competences of PSM personnel.

IEA Bioenergy Task 40 “Sustainable International Bioenergy Trade: Securing supply and demand” Country report of Finland 2008

This study considered the current situation of biofuels markets in Finland. The fact that industry consumes more than half of the total primary energy, widely applied combined heat and power production and a high share of solid biomass fuels in the total energy consumption are specific to the Finnish energy system. Wood is the most important source of bioenergy in Finland, representing 21% of the total energy consumption in 2006. Almost 80% of the wood-based energy is recovered from industrial by-products and residues. Finland has commitment itself to maintaining its greenhouse gas emissions at the 1990 level, at the highest, during the period 2008–2012. The energy and climate policy carried out in recent years has been based on the National Energy and Climate introduced in 2005. The Finnish energy policy aims to achieve the target, and a variety of measures are taken to promote the use of renewable energy sources and especially wood fuels. In 2007, the government started to prepare a new long-term (up to the year 2050) climate and energy strategy that will meet EU’s new targets for the reduction of green house gas emissions and the promotion of renewable energy sources. The new strategy will be introduced during 2008. The international biofuels trade has a substantial importance for the utilisation of bioenergy in Finland. In 2006, the total international trading of solid and liquid biofuels was approximately 64 PJ of which import was 61 PJ. Most of the import is indirect and takes place within the forest industry’s raw wood imports. In 2006, as much as 24% of wood energy was based on foreignorigin wood. Wood pellets and tall oil form the majority of export streams of biofuels. The indirect import of wood fuels increased almost 10% in 2004–2006, while the direct trade of solid and liquid biofuels has been almost constant.

Improving the effectiveness of supply chain development work – an expert role perspective

This study focuses to the intersection of three sets of activities in a company: expert work, development work and supply chain management, SCM. Experts and expert work represent a set of individuals whose efficiency and impact this study is intended to improve, while development work defines the set of organizational activities to focus on. SCM as an expertise area acts as the platform on which this study is built. The study has two aims. Firstly, it aims to derive a model helping an SCM expert to increase the effectiveness of expert work in development tasks by understanding the encountered organizational situations and processes better, reflecting his/her past and future actions to organizational processes and selecting and adjusting the processes and contents of his/her work accordingly. Secondly, it aims to develop applicable approaches and methods to understand, evaluate and manage the organizational processes and situations in development work. The integrative model on approaches and methods to improve the effectiveness of development processes is split to two aggregate dimensions: technical performance of the developed solution and consumption of resources of the development process. Six potential approaches and methods aiming at helping in the management of organizational dimensions are presented in enclosed publications. The approaches focus on three subtasks of development work: decision making, implementation and change, and knowledge accumulation. The approaches and methods have been tested in case studies representing typical development processes in the area of supply chain management. As a result, four suggestions are presented. Firstly, SCM experts are advised to consider the SCM development work to be consisting of development processes. Secondly, inside these processes they should identify and evaluate the risk of difficult decision-making related to organizational factors. Thirdly, they are prompted for an active role in implementation and change, supporting the implementation through whole process. Finally, the development should be seen in a holistic view, taking into account the stage of knowledge and organizational issues related to it, and adopt a knowledge development strategy.

Contract manufacturing networks structure and supply chain management

The usual objectives that companies have for subcontracting are studied in this thesis. The case company’s objectives for contract manufacturing now and in the future are identified. The main objective of the thesis is to create a focused model for the structure and supply chain management in the contract manufacturing network. This model is made for case company’s certain profit center. The different possibilities and their advantages and disadvantages for the structure and supply chain management are examined trough a theoretical review of literature. The possibilities found are then examined from the case company’s point of view. The case company point of view is established based on the opinions of the case company’s representatives. The outcome of the thesis is that the star shaped structure with supply chain management centralized to case company would be the best choice for the case company to manage the contract manufacture network.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.

The influence of substratum type and nutrient supply on biofilm organic matter utilization in streams

We investigated the effect of benthic substratum type (sand and rocks) and nutrient supply (N and P) on biofilm structure and heterotrophic metabolism in a field experiment in a forested Mediterranean stream (Fuirosos). Rock and sand colonization and biofilm formation was intensively studied for 44 d at two stream reaches: control and experimental (continuous addition of phosphate, ammonia, and nitrate). Structural (C, N, and polysaccharide content and bacterial and chlorophyll density) and metabolic biofilm parameters (b-glucosidase, peptidase, and phosphatase enzyme activities) were analyzed throughout the colonization process. The epilithic biofilm (grown on rocks) had a higher peptidase activity at the impacted reach, together with a higher algal and bacterial biomass. The positive relationship between the peptidase activity per cell and the N content of the epilithic biofilm suggested that heterotrophic utilization of proteinaceous compounds from within the biofilm was occurring. In contrast, nutrient addition caused the epipsammic biofilm (grown on sand) to exhibit lower b-glucosidase and phosphatase activities, without a significant increase in bacterial and algal biomass. The differential response to nutrient addition was related to different structural characteristics within each biofilm. The epipsammic biofilm had a constant and high C:N ratio (22.7) throughout the colonization. The epilithic biofilm had a higher C:N ratio at the beginning of the colonization (43.2) and evolved toward a more complex structure (high polysaccharide content and low C:N ratio) during later stages. The epipsammic biofilm was a site for the accumulation and degradation of organic matter: polysaccharides and organic phosphorus compounds had higher degradation activities

Converter Supply Transformer For LVDC Distribution System

This master’s thesis is focused on optimizing the parameters of a distribution transformer with respect to low voltage direct current (LVDC) distribution system. One of the main parts of low voltage direct current (LVDC) distribution system is transformer. It is studied from several viewpoints like filtering capabilities of harmonics caused by rectifier, losses and short circuit current limiting Determining available short circuit currents is one of the most important aspects of designing power distribution systems. Short circuits and their effects must be considered in selecting electrical equipment, circuit protection and other devices.

Supply Risk Management in Pharmaceutical

Fast development in the operating environment and fierce competition have driven companies to pursue efficiency and success through lean and global supply chains. At the same time overall uncertainty has increased in the business environment and supply chains have become a priority in risk management since their vulnerability may endanger business continuity. Although risk management should start at procurement strategy development phase, proactive contingency planning is also essential because it enables correct reaction and fast changes in process execution in the case of risk realization. This thesis is a case study conducted in the pharmaceutical industry where purchasing and materials management organizations face a number of challenges and limitations that have to be considered in supply risk management. The goal of the study was to discuss the operating environment, and identify and analyze supply risks and potential risk management practices. The study was concluded with suggestions for purchasing strategy development that take risk management considerations into account. This copy is the public version of the thesis.

A panel data analysis of FDI and informal labor markets

The objective of this paper is to examine whether informal labor markets affect the flows of Foreign Direct Investment (FDI), and also whether this effect is similar in developed and developing countries. With this aim, different public data sources, such as the World Bank (WB), and the United Nations Conference on Trade and Development (UNCTAD) are used, and panel econometric models are estimated for a sample of 65 countries over a 14 year period (1996-2009). In addition, this paper uses a dynamic model as an extension of the analysis to establish whether such an effect exists and what its indicators and significance may be.

Plan de seguridad y salud para el suministro y montaje del Parque Eólico Rancho Viejo en el T.M. de Medina-Sidonia (Cádiz)

No hace más de 3 años se podía leer en las revistas especializadas que España había pasado a ocupar el tercer puesto en el ranking mundial por potencia eólica instalada. La industria eólica española a su vez ha pasado a ocupar el tercer puesto en la fabricación e instalación de aerogeneradores, con una cuota de mercado del 13%, siendo así un sector con gran capacidad de exportación. Por otra parte, tras diez años de promulgación de la Ley 31/95, de 8 de noviembre, de Prevención de Riesgos Laborales, y después su desarrollo reglamentario, es un hecho incontestable que, pese a todo, y a los ingentes esfuerzos realizados por los distintos actores implicados en la prevención de riesgos laborales (Estado, Comunidades Autónomas, Agentes Sociales, Entidades especializadas, etcetera), existe un sector como el de la construcción que, constituyendo uno de los ejes del crecimiento económico de nuestro país, está sometido a unos riesgos especiales y continúa registrando una siniestralidad laboral muy notoria por sus cifras y gravedad. La legislación de prevención, los manuales sobre las distintas disciplinas preventivas, los libros especializados, los expertos... han abordado ya, con mayor o menor acierto, muchas de las cuestiones generales y específicas que afectan a la seguridad y salud: la evaluación de riesgos, las medidas higiénicas, los equipos de trabajo y equipos de protección individual, la planificación, la formación, los servicios de prevención , los sistemas de gestión de la prevención, las auditorías ... forman parte de los contenidos que se han ido creando en torno a este tema. No obstante, resulta de gran interés la elaboración de un estudio de Seguridad y Salud, en el que partiendo de un desarrollo técnico concreto, pero sobre todo integral, es decir, que comprenda todas las fases para el suministrp e instalación de aerogeneradores para un parque eólico, vayamos desgranando cada uno de los puntos desarrollados en su construcción. Entre las conclusiones más destacadas de este trabajo, se encuentra la definición de las condiciones relativas a la prevención de accidentes y enfermedades laborales durante la ejecución de los trabajos de suministro e instalación de un parque eólico y la gestión de su prevención, las características de las instalaciones preceptivas para higiene y bienestar de los trabajadores, así como directrices básicas mínimas, que deben reflejarse y desarrollarse en el Plan de Seguridad y Salud que las empresas contratistas deberán presentar para su aprobación por el director de obra, antes del comienzo de los trabajos, de forma que sea posible la disminución de accidentes laborales así como evitar las posibles sanciones administrativas y/o penales.

Supply chain costs of a small board lot: sheet cutting and logistics

Succeeding in small board lot (0-20 tons) deliveries, is not always prosperous and failures as well as extra costs compared to standard costs arise. Failure deliveries from converting plants to customer locations tie a lot of unwanted and unexpected costs. Extra costs are handled as quality costs and more precise, internal failure costs. These costs revolve from unsuccessful truck payloads, redundant warehousing or unfavorable routing as examples. Quality costs are becoming more and more important factor in company’s financial decision making. Actual, realized truck payload correlates with the extra costs occurring, so filling the truck payload all get-out well is a key to lower the extra costs. Case company in this study is Corporation A, business segment Boards. Boards have outsourced half of their converting in order to gain better customer service via flexibility, lead time reductions and logistics efficiency improvements. Examination period of the study is first two quarters of year 2008 and deliveries examined are from converters to the customer locations. In Corporation A’s case, the total loss in failure deliveries is hundreds of thousands of Euros during the examination period. So, the logistics goal of getting the right product to the right place and right time for the least cost, does not completely realize.

Unitizing in Supply Chain – Case SECU Container

The aim of this thesis is to analyze how increasing the level of unitizing affects to the costs in the transport system of a Finnish paper and board company. The parts of the supply chain where costs are analyzed are limited to domestic inland transport and port operations. Supply Chain management is important aspect of modern day companies’ strategies. Intermodal transport and different transport systems are the key items which are studied in the theory part of this thesis. In the case study the payload simulations for SECU container (Stora Enso Cargo Unit) stuffed in mills sites are base of the cost analyze of this thesis. Thesis also makes a glance for the restrictions and development trends in Finnish railroads. In analyze SECU containers are moved up to the mill site for stuffing. This increases the level of unitizing in supply chain. Analyze is made for three variation of current traffic lines. Analyze shows that when idea of intermodalism is well used there is considerable cost savings to gather in pre-transportation and port operations. But also effects to mill sites and destination ports needs to be take under considering. In analyze the effects of increased axle weight for SECU container transportation in Finnish railroads is studied. When transport unit is stuffed in earliest possible point supply chain and unloaded the last possible point the savings made in chain can be considerable. In case study of this thesis almost 40% savings in total costs could be reached in pre transportation and port operations when unitizing level is increased in supply chain.

Energy Supply of Detached Houses in Russia and Finland

The problem of choosing the heating system is always relevant when building new houses. Type of energy source (solid fuel, liquid fuel, gas, electricity, alternative sources) is the main issue in choosing the heating system. The work gives a comprehensive overview of heating methods, determines their advantages and disadvantages taking into account economical and ecological situations in Finland and Russia. Quantitative contribution of single Finnish and Russian detached houses in the overall level of carbon dioxide emissions is estimated when using each method. Comparison of Russian and Finnish energy markets and their impact on electricity pricing is made in the work. The influence of air pollution on environmental offsets according to Russian and Finnish legislative and normative acts is determined.

Frequency converter protection against supply network phenomena

This master’s thesis is focused on power supply network disturbances and their effects on the frequency converter – one of the components of modern process crane electrical system. The most critical disturbance types, their causes and the effect they bring to crane electrical system was determined in this work. Variety of protective devices used for mitigation of disturbances is investigated. Device protection solutions for the frequency converter used in crane applications are presented. Analyses of the power supply requirements for frequency converter and various components of crane electrical system were carried out and as a result the crane power supply requirements list that guarantees normal crane operation was built. This list is to be included in crane projects for troubleshooting purposes in order to determine potentially dangerous network.