A comparative analysis of productivity in Brazilian and Mexican manufacturing industries

This article analyses productivity trends in Brazilian and Mexican manufacturing industries between 1995 and 2009, a period in which international competition intensified sharply. A total of 14 manufacturing industries are considered, using two methods based on: (i) the Leontief (1951) model to measure the consumption of intermediate goods used in production; and (ii) the analysis of total factor productivity (TFP). The studies performed show that manufacturing trends have diverged in the two countries. In Mexico, an increased need for imported goods and services was offset by a reduction in domestic goods and service requirements, and an increase in the TFP of production. In the case of Brazil, the fact that manufactured goods markets are more isolated from foreign trade seems to have contributed to a weak productivity performance.

Análise de riscos envolvendo reações exotérmicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A emergência da agrindústria de processamento de frutas no Nordeste paraense, região metropolitana de Belém e no Marajó: uma análise do potencial da capacidade produtiva e inovativa sob a ótica de Arranjo e Sistema Produtivo Inovativo Local – ASPL

O Arranjo Produtivo Local (APL) de Processamento de Frutas do Nordeste paraense, Região Metropolitana de Belém e ilha do Marajó, na Amazônia Oriental Brasileira, se destina ao atendimento dos mercados local, regional e nacional. O APL oferta produtos a partir de frutas regionais e exóticas. A base rural agrícola apresenta capacidade produtiva crescente constituída por agricultores familiares. Esses agricultores têm, relativamente, reorientado suas produções para diversificação e complexificação, onde a fruticultura tem destaque nesse processo. O APL se diferencia tanto das estruturas informais (micro-escala) de processamento do fruto açaí (mercado local), quanto das indústrias de larga escala voltadas às exportações. O APL apresenta taxas de crescimento elevadas, porém, com potencial de rentabilidade limitado por condições estruturais. Por um lado, essas limitações refletem o baixo nível da capacidade de governança e de cooperação entre as empresas. De outro, são o resultado de uma baixa capacidade de interação do conjunto de empresas do APL com o ambiente institucional. Assim, há dificuldades para consolidar e elevar a capacidade produtiva e inovativa das empresas.

A Gestão ambiental no distrito industrial I de Maracanaú - Região metropolitana de Fortaleza-CE

Pós-graduação em Geografia - IGCE

Transformações no espaço rural do norte pioneiro paranaense: estratégias de resistência e/ou permanência dos agricultores familiares no município de Jacarezinho/PR

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alternativas para o abastecimento energético dos fornos de indústrias cerâmicas localizadas no município de São Miguel do Guamá-PA

Diferenciais econômicos e ambientais incorporados a energia da biomassa têm impulsionado a difusão do fornecimento e utilização de biocombustíveis em países desenvolvidos e em desenvolvimento. No Estado do Pará (Brasil), a crescente procura por pó de serragem, caroço de açaí e lenha legalizada, especialmente,relacionada com a atuação de indústrias cerâmicas localizadas no município de São Miguel do Guamá (Pará) e outros segmentos industriais, aponta para uma possível tendência à escassez desses recursos energéticos. Deste modo, necessitando de iniciativa para a busca de combustíveis alternativos que sejam capazes não somente de garantir o suprimento energético indispensável à produção cerâmica atual e futura dessas indústrias, mas também de assegurar a continuidade e preservação dos recursos naturais renováveis da região. Este trabalho consolida pesquisa junto a empresas associadas ao Sindicato das Indústrias Cerâmicas de São Miguel do Guamá, que estão localizadas neste município, utilizando como amostra empresas ceramistas que buscam alternativas em bioenergia, sendo também pesquisados agroindústrias e agricultores presentes nos demais Municípios do Estado do Pará. Objetiva-se a identificação de alternativas para o suprimento energético em fornos cerâmicos, considerando o aproveitamento de fontes energéticas renováveis e oportunidades para redução dos custos de sua aquisição por meio da prática do frete de retorno. Utilizou-se como estratégia de pesquisa o estudo de caso em cinco momentos de entrevistas semiestruturadas orientadas por questionários. Os resultados obtidos indicam que há oportunidade de oferta de biomassa combinante com as necessidades das empresas ceramistas pesquisadas, com potencial para atender demanda energética reprimida e permitindo a continuidade de negócios estratégicos no Pará, como neste momento, o crescente setor da construção civil.

Efeitos de descontinuidades na propagação de ondas em estruturas unidimensionais

Pós-graduação em Engenharia Mecânica - FEIS

Simulation-based ultrasound-guided central venous cannulation training program

PURPOSE: To propose a simulation-based ultrasound-guided central venous cannulation skills' training program, during residency.METHODS: This study describes the strategies for learning the ultrasound-guided central venous cannulation on low-fidelity bench models. The preparation of bench models, educational goals, processes of skill acquisition, feedback and evaluation methods were also outlined. The training program was based on key references to the subject.RESULTS: It was formulated a simulation-based ultrasound-guided central venous cannulation teaching program on low-fidelity bench models.CONCLUSION: A simulation-based inexpensive, low-stress, no-risk learning program on low-fidelity bench models was proposed to facilitate acquisition of ultrasound-guided central venous cannulation skills by residents-in-training before exposure to the living patient.

Evaluation of Bone Heating, Drill Deformation, and Drill Roughness After Implant Osteotomy: Guided Surgery and Classic Drilling Procedure

Purpose: This study evaluated and compared bone heating, drill deformation, and drill roughness after several implant osteotomies in the guided surgery technique and the classic drilling procedure. Materials and Methods: The tibias of 20 rabbits were used. The animals were divided into a guided surgery group (GG) and a control group (CG); subgroups were then designated (G0, G1, G2, G3, and G4, corresponding to drills used 0, 10, 20, 30 and 40 times, respectively). Each animal received 10 sequential osteotomies (5 in each tibia) with each technique. Thermal changes were quantified, drill roughness was measured, and the drills were subjected to scanning electron microscopy. Results: Bone temperature generated by drilling was significantly higher in the GG than in the CG. Drill deformation in the GG and CG increased with drill use, and in the CG a significant difference between GO and groups G3 and G4 was observed. In the GG, a significant difference between GO and all other groups was found. For GG versus CG, a significant difference was found in the 40th osteotomy. Drill roughness in both groups was progressive in accordance with increased use, but there was no statistically significant difference between subgroups or between GG and CG overall. Conclusion: During preparation of implant osteotomies, the guided surgery technique generated a higher bone temperature and deformed drills more than the classic drilling procedure. The increase in tissue temperature was directly proportional to the number of times drills were used, but neither technique generated critical necrosis-inducing temperatures. Drill deformation was directly proportional to the number of times the drills were used. The roughness of the drills was directly proportional to the number of reuses in both groups but tended to be higher in the GG group.

Comparison of the performance of natural latex membranes prepared with different procedures and PTFE membrane in guided bone regeneration (GBR) in rabbits

This work assessed the performance of membranes made of natural latex extracted from Hevea brasiliensis prepared with three different methods: polymerized immediately after collection without the use of ammonia (L1); polymerized after preservation in ammonia solution (L2); and polymerized after storage in ammonia, followed by Soxhlet technique for the extraction of substances (L3). Polytetrafluoroethylene (PTFE) membrane was used as control. Two 10-mm diameter bone defects were surgically made in the calvaria of thirty adult male New Zealand rabbits. Defects (total n = 60) were treated with guided bone regeneration (GBR) using L1, L2, L3 or PTFE membranes (n = 15 for each membrane). Ten animals were euthanized after 7, 20 and 60 days postoperatively so that five samples (n = 5) of each treatment were collected at each time, and bone regeneration was assessed microscopically. The microscopic analysis revealed defects filled with blood clot and new bone formation at the margins of the defect in all 7-day samples, while 20-day defects were mainly filled with fibrous connective tissue. After 60 days defects covered with L1 membranes showed a significantly larger bone formation area in comparison to the other groups (P < 0.05, ANOVA, Tukey). Additionally, bone tissue hypersensitization for L1 and PTFE membranes was also investigated in six additional rabbits. The animals were subjected to the same surgical procedure for the confection of one 10-mm diameter bone defect that was treated with L1 (n = 3) or PTFE (n = 3). Fifty-three days later, a second surgery was performed to make a second defect, which was treated with the same type of membrane used in the first surgery. Seven days later, the animals were euthanized and samples analyzed. No differences among L1 and PTFE samples collected from sensitized and non-sensitized animals were found (P > 0.05, Kruskal-Wallis). Therefore, the results demonstrated that latex membranes presented performance comparable to PTFE membranes, and that L1 membranes induced higher bone formation. L1 and PTFE membranes produced no hypersensitization in the bone tissue.

Visuomotor processing and hand force coordination in dyslexic children during a visually guided manipulation task

Developmental Dyslexia negatively affects children's reading and writing ability and, in most cases, performance in sensorimotor tasks. These deficits have been associated with structural and functional alterations in the cerebellum and the posterior parietal cortex (PPC). Both neural structures are active during visually guided force control and in the coordination of load force (LF) and grip force (GF) during manipulation tasks. Surprisingly, both phenomena have not been investigated in dyslexic children. Therefore, the aim of this study was to compare dyslexic and non-dyslexic children regarding their visuomotor processing ability and GF-LF coordination during a static manipulation task. Thirteen dyslexic (8-14YO) and 13 age- and sex-matched non-dyslexic (control) children participated in the study. They were asked to grasp a fixed instrumented handle using the tip of all digits and pull the handle upward exerting isometric force to match a ramp-and-hold force profile displayed in a computer monitor. Task performance (i.e., visuomotor coordination) was assessed by RMSE calculated in both ramp and hold phases. GF-LF coordination was assessed by the ratio between GF and LF (GF/LF) calculated at both phases and the maximum value of a cross-correlation function (r(max)) and its respective time lag calculated at ramp phase. The results revealed that the RMSE at both phases was larger in dyslexic than in control children. However, we found that GF/LF, rmax, and time lags were similar between groups. Those findings indicate that dyslexic children have a mild deficit in visuomotor processing but preserved GF-LF coordination. Altogether, these findings suggested that dyslexic children could present mild structural and functional alterations in specific PPC or cerebellum areas that are directly related to visuomotor processing. (C) 2014 Elsevier Ltd. All rights reserved.

Effect of platele-rich plasma on healing of class III furcation defects treated with autogenous bone grafting and guided tissue regeneration: a histomorphometric sutdy in dogs

Objective: The purpose of this study was to evaluate the effects of the platelet-rich plasma (PRP) when used in combination with autogenous bone graft and bioabsorbable membrane (Resolut® ) in the treatment of Class  III furcation defects in dogs. Material and method: Class III furcation defects (5 mm in height and in depth) were surgically created in the mandibular third premolars of five mongrel dogs. After nine weeks, the lesions were treated with scaling and root planning and each defect received one of the following treatments: autogenous bone graft + membrane (group C) or PRP + autogenous bone graft + membrane (group T). After a healing period of 90 days, the animals were sacrificed. Routine histological processing and staining with hematoxilyn and eosin and Masson trichrome were performed and a histomorphometric analysis determined the effect of the treatments on periodontal tissue regereneration. Data were analyzed by Hotelling’s T-squared (p < 0.05). Result: No statistically significant difference between C and T groups was observed by the histomorphometric analysis of the furcation area. Both treatment groups demonstrated similar regenerative results with the furcation defects partially filled and periodontal regeneration limited to the experimental notches of the lesions. (p > 0.05). Conclusion: According to the present results, PRP does not enhance the periodontal regeneration in class III furcation defects treated with autogenous bone graft and bioabsorbable membrane.

Connective tissue graft as a biological barrier for guided tissue regeneration in intrabony defects: a histological study in dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of platelet-rich plasma on healing of class III furcation defects treated with autogenous bone grafting and guided tissue regeneration: a histomorphometric study in dogs

The purpose of this study was to evaluate the effects of the platelet-rich plasma (PRP) when used in combination with autogenous bone graft and bioabsorbable membrane (Resolut® ) in the treatment of Class  III furcation defects in dogs. Material and method: Class III furcation defects (5 mm in height and in depth) were surgically created in the mandibular third premolars of five mongrel dogs. After nine weeks, the lesions were treated with scaling and root planning and each defect received one of the following treatments: autogenous bone graft + membrane (group C) or PRP + autogenous bone graft + membrane (group T). After a healing period of 90 days, the animals were sacrificed. Routine histological processing and staining with hematoxilyn and eosin and Masson trichrome were performed and a histomorphometric analysis determined the effect of the treatments on periodontal tissue regereneration. Data were analyzed by Hotelling’s T-squared (p < 0.05). Result: No statistically significant difference between C and T groups was observed by the histomorphometric analysis of the furcation area. Both treatment groups demonstrated similar regenerative results with the furcation defects partially filled and periodontal regeneration limited to the experimental notches of the lesions. (p > 0.05). Conclusion: According to the present results, PRP does not enhance the periodontal regeneration in class III furcation defects treated with autogenous bone graft and bioabsorbable membrane.