La competencia comunicativa intercultural en el aula de español de los negocios: análisis de materiales para su enseñanza

RESUMEN La adquisición de la competencia comunicativa intercultural en la enseñanza de Lenguas Extranjeras (LE) y/o Lenguas para Fines Específicos (LFE) debe ser un proceso de aprendizaje consciente y explícito cuyo fin es la transmisión de conocimientos teóricos, el desarrollo de habilidades comportamentales y de actitudes positivas a través del contacto con la/s cultura/s meta. Esta tesis tiene como objetivo general contribuir al desarrollo de la competencia comunicativa intercultural comercial del estudiante de español de los negocios (EN). Para ello se ha realizado un análisis de los manuales para su enseñanza. En concreto, hemos auditado los manuales de EN con el fin de conocer la metodología didáctica que emplean en la enseñanza de la competencia comunicativa intercultural comercial, tomando como marco de referencia el enfoque intercultural para la enseñanza de las Lenguas de los Negocios. Para alcanzar este fin se ha dividido la investigación en tres partes: 1) la revisión de los antecedentes sobre la enseñanza del componente intercultural y del análisis de materiales en los cursos de LFE; 2) la configuración de un constructo teórico que permitiera a la vez, seleccionar el objeto de estudio, diseñar el instrumento de análisis y disponer de un marco de referencia valorativo; 3) y la creación, pilotaje y aplicación del instrumento de análisis, y la auditoría de los datos. Los resultados muestran que, en líneas generales, predomina una visión tradicional de la cultura; un escaso tratamiento de la relación lengua-y-cultura; un seguimiento parcial de los principios pedagógicos para la adquisición de la competencia comunicativa intercultural; un tratamiento bajo de las habilidades interculturales específicas en las interacciones comerciales; y una cobertura parcial de las habilidades interculturales generales, las cuales se centran fundamentalmente en la adqusición de saberes teóricos. PALABRAS CLAVE: competencia comunicativa intercultural; comunicación intercultural comercial; español de los negocios; español para fines específicos; auditoria de manuales didácticos. ABSTRACT The acquisition of intercultural communicative competence in Foreign Language (FL) and / or Languages for Specific Purposes teaching (LSP) must be a conscious and explicit learning to develop knowledge, skills and positive attitudes through contact with the target culture/s. The overall objective of this thesis is to assist the development of the intercultural communicative competence of the student of Spanish for Business (SB) through the audit of the teaching textbooks published in the last decade through a multidisciplinary approach to teaching LSP. The audit was carried out in order to ascertain the underlying approach and course design for the development of the intercultural communicative competence; to state the methodological approach to culture, language-and-culture relationship, culture teaching, culture acquisition and course design. To achieve this objective, the work has been divided into four parts: 1) review of the background on teaching the intercultural component and the analysis of materials in a courses of LSP through a multidisciplinary approach, 2) configuration of a theoretical construct allowing to select the object of study, to design the analytical instrument and to have an evaluative framework, together with the selection of a corpus of Spanish for Business textbooks, 3) development of the analytical instrument and 4) application of the analytical instrument and audit of selected textbooks. The results show that, in the textbooks analyzed, dominated a traditional view of culture, a low ratio treatment of the language-and-culture relationship, a partial implementation of the pedagogical principles for the acquisition of intercultural communicative competence; poor treatment of specific intercultural skills in business interactions, and partial coverage of the general cultural skills, which focus primarily on the acquisition of theoretical knowledge. KEY WORDS: Intercultural communicative competence; Intercultural communicative competence; Spanish for Business; Spanish for Specific Purposes; Textbook audit

Alternative Assessment in Engineering Language Education: The case of the Technical University of Madrid

This article describes a research project involving students from nine different engineering degrees at the Technical university of Madrid. The purpose of the project was to analyze the use of peer and self assessment and the students? attitudes toward alternative assessment procedures.

Sputter optimization of AlN on diamond substrates for high frequency SAW resonators

The AlN/diamond structure is an attractive combination for SAW devices and its application at high frequencies. In this work, the synthesis of AlN thin films by reactive sputtering has been optimized on diamond substrates in order to process high frequency devices. Polished microcrystalline and as-grown nanocrystalline diamond substrates have been used to deposit AlN of different thickness under equal sputtering conditions. For the smoother substrates, the FWHM of the rocking curve of the (002) AlN peak varies from 3.8° to 2.7° with increasing power. SAW one port resonators have been fabricated on these films, whose electrical characterization (in terms of S11 parameters) is reported.

Fabrication of high frequency SAW resonators using AlN/Diamond/Si technology

The synthesis of AlN on diamond is a great challenge, not only because of the between an AlN/diamond interface, but also because of the high surface roughness of the diamond layers [8, 9]. In the case of microcrystalline diamond, the last problem was solved by polishing. However, polishing nanocrystalline diamond is not straightforward. For the diamond synthesis by CVD, silicon was used as a substrate. The diamond/Si interface presents a smoother diamond than the diamond/air interface. This paper reports on the fabrication of high frequency SAW resonators using AlN/Diamond/Si technology.

Herramienta software para el aprendizaje de la generación de la cardiode en un entorno AutoCAD

This article presents a novel application which has been developed in Visual LISP for an AutoCAD environment, and which shows intuitively and quickly the generation of the Cardioid curve in five different ways (conchoid of a circumference, pedal curve of a circumference, inverse of a parabola, orthoptic curve of a circumference and epicycloid of a circumference). This cyclic curve has a large number of artistic and technical applications, among them the profile of some cams.

Analysing written production competence descriptors for academic and professional purposes and their calibration to the CEFR

The Common European Framework of Reference for Languages (CEFR) "describes in a comprehensive way what language learners have to learn to do in order to use a language for communication and what knowledge and skills they have to develop so as to be able to act effectively" (Council of Europe, 2001: 1). This paper reports on the findings of two studies whose purpose was to assess written production competence descriptors meant for their inclusion into the Academic and Professional English Language Portfolio KELP) for students of engineering and architecture. The main objective of these studies was to establish whether the language competence descriptors were a satisfactory valid tool in their language programmes from the point of view of clarity, relevance and reliability, as perceived by the students and fellow English for Academic Purposes (RAP) / English for Science and Technology (EST) instructors. The studies shed light on how to improve unsatisfactory descriptors. Results show that the final descriptor lists were on the whole well calibrated and fairly well written: the great majority was considered valid for both teachers and students involved.

Improving the competitiveness of the Spanish port system by optimising the cargo handling service

Port services, and in particular the cargo handling service, are responsible for the greatest share of costs incurred during the passage of cargo through a port. The provision of these services reliably and efficiently is crucial in a sector in which there is great opacity. This study has provided the responsible administration ? the Port Authority ? with a tool enabling objective decision making both when it comes to issuing the corresponding licenses and during the period of service provision. Furthermore, we have proposed a series of measures whose application would improve the conditions of service provision and reduce the costs incurred by the passage of cargo through the port.

Optimization of AlN thin layers on diamond substrates for high frequency SAW resonators

AlN/diamond heterostructures are very promising for high frequency surface acoustic wave (SAW) resonators. In their design, the thickness of the piezoelectric film is one of the key parameters. On the other hand, the film material quality and, hence, the device performance, also depend on that thickness. In this work, polished microcrystalline diamond substrates have been used to deposit AlN films by reactive sputtering, from 150 nm up to 3 μm thick. A high degree of the c-axis orientation has been obtained in all cases. SAW one port resonators at high frequency have been fabricated on these films with a proper combination of the film thickness and transducer size.

Proposal for a semantic hierarchy of terminological metaphors in science and technology

Cognitive linguistics is considered as one of the most appropriate approaches to the study of scientific and technical language formation and development, where metaphor is accepted to play an essential role. This paper, based on the Cognitive Theory of Metaphor, takes as the starting point the terminological metaphors established in the research project METACITEC(Note 1), which was developed with the purpose of unfolding constitutive metaphors and their function in the language of science and technology. After the analysis of metaphorical terms and using a mixed corpus from the fields of Agriculture, Geology, Mining, Metallurgy, and other related technical fields, this study presents a proposal for a hierarchy of the selected metaphors underlying the scientific conceptual system, based on the semantic distance found in the projection from the source domain to the target domain. We argue that this semantic distance can be considered as an important parameter to take into account in order to establish the metaphoricity of science and technology metaphorical terms. The findings contribute to expand on the CTM stance that metaphor is a matter of cognition by reviewing the abstract-concrete conceptual relationship between the target and source domains, and to determine the role of human creativity and imagination in the language of science and technology configuration

Rocks are human beings: researching the humanizing metaphor in earth science scientific texts

This paper describes a corpus-based analysis of the humanizing metaphor and supports that constitutive metaphor in science and technology may be highly metaphorical and active. The study, grounded in Lakoff’s Theory of Metaphor and in Langacker’s relational networks, consists of two phases: firstly, Earth Science metaphorical terms were extracted from databases and dictionaries and, then, contextualized by means of the “Wordsmith” tool in a digitalized corpus created to establish their productivity. Secondly, the terms were classified to disclose the main conceptual metaphors underlying them; then, the mappings and the relational networks of the metaphor were described. Results confirm the systematicity and productivity of the metaphor in this field, show evidence that metaphoricity of scientific terms is gradable, and support that Earth Science metaphors are not only created in terms of their concrete salient properties and attributes, but also on abstract human anthropocentric projections.

Teaching writing through reading: a text-centred approach

Se comparan y contrastan las destrezas requeridas para la comprensión lectora con aquellas que se necesitan para la producción de escritos correctos, en inglés, coherentes y bien cohesionados. Se comentan las actividades didácticas relacionadas con ello.The aim of this article is to establish the relevance of teaching reading and writing skills to students at Madrid Polytechnic University, and to show the relationship and interdependence of these activities in EAP courses. The skills involved in reading and writing processes for academic purposes for L2 students are compared and commented on from a rhetorical point of view. Learning tasks based on text-type analysis are recommended as adequate activities to build schemata for writing and represent a synthesis of the teaching objectives proposed for reading and writing English courses.

Los géneros lingüísticos científicos y técnicos. Aspectos pragmáticos y convencionales

Se analiza el concepto de género lingüístico contrastándolo con el de tipo de texto. Se describen las características de los géneros científicos y se relacionan y comentan los más frecuentemente utilizados por la comunidad científica. Se detallan los aspectos organizativos de cada género de acuerdo con las convenciones establecidas por la comunidad discursiva a la que se alude.This paper deals with the concepts of discourse, text, text-type and genre within the context of English for Science and Technology. There is an attempt to establish their boundaries, at times unclear, with the purpose of their clarification, following contextual reference and conventional aspects of the discourse community. Examples of the use of these terms by different authors are discussed, reaching the conclusion that texts are the material realisation of discourse whereas genre represents the pragmatic dimension of a type of text, constructed according to the purpose assigned to it by the discourse community. Taking into account the communicative purpose of the text producer and the scientific community where they occur, several genre texts are described, which should be of interest for the teaching of English in academic settings.

Exploring cognition processes in second language acquisition: the case of cognates and false-friends in EST

This article explores one aspect of the processing perspective in L2 learning in an EST context: the processing of new content words, in English, of the type ‘cognates’ and ‘false friends’, by Spanish speaking engineering students. The paper does not try to offer a comprehensive overview of language acquisition mechanisms, but rather it is intended to review more narrowly how our conceptual systems, governed by intricately linked networks of neural connections in the brain, make language development possible, creating, at the same time, some L2 processing problems. The case of ‘cognates and false friends’ in specialised contexts is brought here to illustrate some of the processing problems that the L2 learner has to confront, and how mappings in the visual, phonological and semantic (conceptual) brain structures function in second language processing of new vocabulary. Resumen Este artículo pretende reflexionar sobre un aspecto de la perspectiva del procesamiento de segundas lenguas (L2) en el contexto del ICT: el procesamiento de palabras nuevas, en inglés, conocidas como “cognados” y “falsos amigos”, por parte de estudiantes de ingeniería españoles. No se pretende ofrecer una visión completa de los mecanismos de adquisición del lenguaje, más bien se intenta mostrar cómo nuestro sistema conceptual, gobernado por una complicada red de conexiones neuronales en el cerebro, hace posible el desarrollo del lenguaje, aunque ello conlleve ciertas dificultades en el procesamiento de segundas lenguas. El caso de los “cognados” y los “falsos amigos”, en los lenguajes de especialidad, se trae para ilustrar algunos de los problemas de procesamiento que el estudiante de una lengua extranjera tiene que afrontar y el funcionamiento de las correspondencias entre las estructuras visuales, fonológicas y semánticas (conceptuales) del cerebro en el procesamiento de nuevo vocabulario.

Estrategias metacognitivas y metalingüísticas empleadas en la redacción de los informes técnicos

Este trabajo presenta un análisis de las estrategias cognitivas, metacognitivas y metalingüísticas implicadas en la elaboración de los informes técnicos en las asignaturas de IPA, para alumnos de ciencias e ingenierías. Las aplicaciones didácticas se formulan en relación con los niveles comunicativos del Marco de Referencia Europeo para las lenguas, teniendo en cuenta uno de los géneros lingüísticos más frecuentes dentro de los ámbitos de la ciencia y la técnica.. ABSTRACT. This paper presents an analysis of cognitive, metacognitive and metalinguistic strategies implied in the written production of technical reports, as they may be considered in academic writing courses for science and engineering students. Methodological applications are made bearing in mind the European Framework of Reference for Languages in relation to one of the most frequent genres produced by scientists and engineers..