Foreign Direct Investment, Clean Development Mechanism, and Environmental Management: A case of Sub-Saharan Africa

This doctoral dissertation explores the contribution of environmental management practices, the so-called clean development mechanism (CDM) projects, and foreign direct investment (FDI) in achieving sustainable development in developing countries, particularly in Sub- Saharan Africa. Because the climate change caused by greenhouse gas emissions is one of the most serious global environmental challenges, the main focus is on the causal links between carbon dioxide (CO2) emissions, energy consumption, and economic development in Sub-Saharan Africa. In addition, the dissertation investigates the factors that have affected the distribution of CDM projects in developing countries and the relationships between FDI and other macroeconomic variables of interest. The main contribution of the dissertation is empirical. One of the publications uses crosssectional data and Tobit and Poisson regressions. Three of the studies use time-series data and vector autoregressive and vector error correction models, while two publications use panel data and panel data estimation methods. One of the publications uses thus both timeseries and panel data. The concept of Granger causality is utilized in four of the publications. The results indicate that there are significant differences in the Granger causality relationships between CO2 emissions, energy consumption, economic growth, and FDI in different countries. It appears also that the causality relationships change over time. Furthermore, the results support the environmental Kuznets curve hypothesis but only for some of the countries. As to CDM activities, past emission levels, institutional quality, and the size of the host country appear to be among the significant determinants of the distribution of CDM projects. FDI and exports are also found to be significant determinants of economic growth.

Identification of characteristics for successful university-company partnership development

The importance of university-company collaboration has increased during the last decades. The drivers for that are, on the one hand, changes in business logic of companies and on the other hand the decreased state funding of universities. Many companies emphasize joint research with universities as an enabling input to their development processes, which aim at creating new innovations, products and wealth. These factors have changed universities’ operations and they have adopted several practices of dynamic business organizations, such as strategic planning, monitoring and controlling methods of internal processes etc. The objective of this thesis is to combine different characteristics of successful university-company partnership and its development. The development process starts with identifying potential partners in the university’s interest group, which requires understanding the role of different partners in the innovation system. Next, in order to find a common development basis, matching the policy and strategy between partners is needed. The third phase is to combine the academic and industrial objectives of a joint project, which is a typical form of university-company collaboration. The optimum is a win-win situation where both partners, universities and companies, can get addedvalue. For the companies added value typically means access to new research results before their competitors. For the universities added value offers a possibility to carry on high level scientific work. The research output in the form of published scientific articles is evaluated by the international science community. Because the university-company partnership is often executed by joint projects, the different forms of this kind of projects is discussed in this study. The most challenging form of collaboration is a semi-open project model, which is not based on bilateral activities between universities and companies but on a consortium of several universities, research institutes and companies. The universities and companies are core actors in the innovation system. Thus the discussion of their roles and relations to public operators like publicly funded financiers is important. In the Finnish innovation system there are at least the following doers executing strategies and policies: EU, Academy of Finland and TEKES. In addition to these, Strategic Centres for Science, Technology and Innovation which are owned jointly by companies, universities and research organizations have a very important role in their fields of business. They transfer research results into commercial actions to generate wealth. The thesis comprises two parts. The first part consists of an overview of the study including introduction, literature review, research design, synthesis of findings and conclusions. The second part introduces four original research publications.

Innovation process development and business process integration - a multiple case study

The main objective of this study was to find out the bases for innovation model formulation in an existing organization based on cases. Innovation processes can be analyzed based on their needs and based on their emphasis on the business model development or R&D. The research was conducted in energy sector within one company by utilizing its projects as cases for the study. It is typical for the field of business that development is slow, although the case company has put emphasis on its innovation efforts. Analysis was done by identifying the cases’ needs and comparing them. The results were that because of the variances in the needs of the cases, the applicability of innovation process models varies. It was discovered that by dividing the process into two phases, a uniform model could be composed. This model would fulfill the needs of the cases and potential future projects as well.

Developing construction site operations for EPC power plant projects

The purpose of this thesis is to find development areas for site operations in power plant construction projects delivered by Wärtsilä. The inspected operations are subcontractor management, site material management and work scheduling. The contractor's role in EPC project is to respond for engineering, procurement, and construction supervision. Geographical and cultural differences brings challenges for finding development areas as Wärtsilä delivers projects world-wide. Searching for development area is mainly made with survey, which answers were collected from the target company's site personnel. Based on the results, with good planning and preparation various problems would be avoided. An external view for the thesis was collected by an expert interview, which was held to three expe-rienced construction operating executives. Interviewees believed that with the se-lection of right site personnel and clearly defined areas of responsibility will great-ly affect the outcome of the project. Some of the theory has been collected from areas, which have helped to under-stand the inspected operations on site. Improving competence knowledge has been important due to the broad scope of work and the author’s inexperience of the topic. Also generally effective practices from construction projects has been col-lected to the theory part. Functionality of general practices have been reflected together with the results of empirically collected data for Wärtsilä's projects. As a result, a model was generated where development proposals and the benefits from new procedures were presented.

A Project Portfolio Tool for Forecasting Small Projects Profitability

The case company in this study is a large industrial engineering company whose business is largely based on delivering a wide-range of engineering projects. The aim of this study is to create and develop a fairly simple Excel-based tool for the sales department. The tool’s main function is to estimate and visualize the profitability of various small projects. The study also aims to find out other possible and more long-term solutions for tackling the problem in the future. The study is highly constructive and descriptive as it focuses on the development task and in the creation of a new operating model. The developed tool focuses on estimating the profitability of the small orders of the selected project portfolio currently on the bidding-phase (prospects) and will help the case company in the monthly reporting of sales figures. The tool will analyse the profitability of a certain project by calculating its fixed and variable costs, then further the gross margin and operating profit. The bidding phase of small project is a phase that has not been covered fully by the existing tools within the case company. The project portfolio tool can be taken into use immediately within the case company and it will provide fairly accurate estimate of the profitability figures of the recently sold small projects.

Development of modular roll service concepts

The goal of this study was to find and develop new or improved service concepts for rolls in a paper machine and secondary targets were to find out what the KPIs and values of the concepts are. Two methodologies were utilized in researching this problem; firstly sales personnel were interviewed about customer values and KPIs and a questionnaire about service modules were sent out to four BSI (basic sales item) responsible persons. Throughout the research process differences in geographic regions were identified and several customer KPIs and values were discovered. The interviews showed that the main concern for customers is the cost of operations. The goal is to produce the same or in some cases more tons with smaller operating costs. The questionnaire standardized the data about service modules and made it possible to link these values, KPIs and concerns of customers to Valmet’s service offering. Eventually these service modules were used to create a service concepts that offer flexibility, cost savings, safety and peace of mind for the customers. With this new conceptual approach Valmet can more flexibly answer to customer quotations and modify the offering to better generate customer value and customer satisfaction. In addition a new BSI was defined and proposed for pilot projects.

Applying software performance engineering methods to development of IT device management systems

Ohjelmiston suorituskyky on kokonaisvaltainen asia, johon kaikki ohjelmiston elinkaaren vaiheet vaikuttavat. Suorituskykyongelmat johtavat usein projektien viivästymisiin, kustannusten ylittymisiin sekä joissain tapauksissa projektin täydelliseen epäonnistumiseen. Software performance engineering (SPE) on ohjelmistolähtöinen lähestysmistapa, joka tarjoaa tekniikoita suorituskykyisen ohjelmiston kehittämiseen. Tämä diplomityö tutkii näitä tekniikoita ja valitsee niiden joukosta ne, jotka soveltuvat suorituskykyongelmien ratkaisemiseen kahden IT-laitehallintatuotteen kehityksessä. Työn lopputuloksena on päivitetty versio nykyisestä tuotekehitysprosessista, mikä huomioi sovellusten suorituskykyyn liittyvät haasteet tuotteiden elinkaaren eri vaiheissa.

Consumer-led new product development. Case: Dairy Industry

This thesis focuses on consolidation the recommendations on the integration of consumer in new product development (NPD) given in the academic literature, and on the example of the three NPD projects in the case company. The empirical findings advocate that the case company fulfills the principles of consumer-led NPD, and it is only one-step away of the full consumer empowerment strategy. Therefore, its NPD can be seen as an example of consumer-led NPD implementation. The findings also suggest that the product can be developed in consumer-led way regardless of the source of an idea (product- or need-driven), the target audience and resources assigned, in case when consumer mindset is integrated on all levels of organisation: strategic, cultural, operational and process. It is possible with top-management commitment, internal consumer research group, and the sophisticated consumer research methods. The specific managerial recommendations are given on developing consumer-led culture, strategy, NPD process and the appropriate consumer research methods and techniques.

Primary characterization of genes involved in the colony development of the insect pathogenic fungus Metarhizium anisopliae /

Strain improvement of the insect pathogenic fungus Metarhizium anisopUae is necessary to increase its virulence towards agricultural pests and thus improve its commercial efficacy. Nevertheless, the release of genetically modified conidia in crop fields may negatively affect the ecosystem. Controlling conidiation is a potential means of limiting the release of engineered strains since conidia are the infective propagules and the means of dispersal. The purpose of this study was to research the colony development of M. anisopUae to identify potential targets for genetic manipulation to control conidiation. Following Agrobacterium tumefaciem insertional mutagenesis, phenotypic mutants were characterized using Y-shaped adaptor dependent extension PCR. Four of 1 8 colony development recombinants had T-DNA flanking sequences with high homology to genes encoding known signaling pathway proteins that regulate pathogenesis and/or asexual development in filamentous fungi. Conidial density counts and insect bioassays suggested that a Serine/Threonine protein kinase COTl homolog is not essential for conidiation or virulence. Furthermore, a choline kinase homolog is important for conidiation, but not virulence. Finally, the regulator of G protein signaling CAG8 and a NADPH oxidase NoxA homolog are necessary for conidiation and virulence. These genes are candidates for further investigation into the regulatory pathways controlling conidiation to yield insight into promising gene targets for biocontrol strain improvement.

Niagara alternative food projects : networks, discourses and nature /

This thesis undertakes an exploration of the nature of alternative food projects in Niagara. A review of various theoretical approaches to the study of food and agriculture, suggests that actor-network theory offers the most useful lens through which to understand these projects. In particular, actor-network theory facilitates non-dualistic theorisations of power and scale and a commitment to the inclusion of non-humans in the 'social' sciences. The research is based on 19 in-depth interviews with actors involved in various urban and rural projects including community supported agriculture, community gardens, chefs using local seasonal food, a winery that grows organically, the good food box, a value-added small business, and organic producers. The analysis consists of four themes. The first analytical section pays special attention to the prominence of agri-tourism in Niagara, and examines the ways in which the projects in the sample interact with agri-tourist networks. In the second section the discussion focuses on the discourses and practices of resistance among Niagara alternative food actors. The participants' interviews suggest there are more discourses of resistance toward agri-tourist than toward dominant food networks. The third section questions commodity chain theorisations of alternative food projects. In particular, this section shows how the inclusion of non-human actors in an analysis confounds conceptualisations of 'short' and 'local' chains. The final analytical section assesses relations of power in Niagara alternative food projects. Three important conclusions arise from this research. First, Niagara alternative food projects cannot be conceptualised as operating at the 'local' scale. Broadening the scope of analysis to include non-human actors, it becomes apparent that these projects actually draw on a variety of extra-local actors. They are at once local and global. Second, the projects in this sample are simultaneously part of alternative, dominant and agri-tourist networks. While Niagara alternative food projects do perform many of the roles characteristic of alternative food systems, they are also involved in practices of development, business, and class distinction. Thus, alternative food networks should not be understood as separate from and in direct opposition to dominant food networks. Despite the second conclusion, this research determines that Niagara alternative food projects have made significant strides in the reworking of power. The projects represented in this thesis do engage in resistant practices and are associated with increased levels ofjustice.

Preservation of Agricultural Lands Society (PALS) fonds, 1954-2015, n.d.

Preservation of Agricultural Lands Society [PALS] held its first meeting at Brock University on June 21, 1976. Its first executive consisted of Robert Hoover, Rick Teather, Debbie Kehler and Bill Forster. Some objectives of the organization were "to seek the preservation of valuable farm areas from non-agricultural expansion and development and to foster development and support of federal, provinicial and local policy which will provide a secure financial future for farming." Gracia Janes and John Bacher are some of the organizations' well known advocates. The organization was active in raising public awareness of the issues surrounding encroaching development onto existing agricultural lands. The organization is still active today [2016] in educating the public and attempting to influence governments at all levels to protect valuable agricultural lands.

Managing Antimicrobial Resistance In Food Production : Conflicts Of Interest And Politics In The Development Of Public Health Policy

Antimicrobial resistance is a growing public health concern and is associated with the over or inappropriate use of antimicrobials in both humans and agriculture. While there has been recognition of this problem on the part of agricultural and public health authorities, there has nonetheless been significant difficulty in translating policy recommendations into practical guidelines. In this paper, we examine the process of public health policy development in Quebec agriculture, with a focus on the case of pork production and the role of food animal veterinarians in policy making. We argue that a tendency to employ strictly techno-scientific risk analyses of antimicrobial use ignores the fundamental social, economic and political realities of key stakeholders and so limits the applicability of policy recommendations developed by government advisory groups. In particular, we suggest that veterinarians’ personal and professional interests, and their ethical norms of practice, are key factors to both the problem of and the solution to the current over-reliance on antimicrobials in food production.

Vers une transition forestière en Thaïlande? : analyse causale de l’avancée des forêts à partir du cas de Phetchabun

Selon des thèses développées au cours des années 1990 et 2000, le développement économique constitue à la fois la source et la solution aux problèmes environnementaux. Au sujet des forêts, les transitions forestières (c’est-à-dire le passage de la déforestation à la reforestation) documentées dans certains pays développés seraient causées par des dynamiques universelles intrinsèques au développement et à la modernisation des sociétés. Nos travaux ont porté sur l’application de cette vision optimiste et controversée à l’évolution des superficies forestières en Thaïlande. S’appuyant sur une recension de la littérature, sur des données secondaires ainsi que nos travaux de terrain dans la région de Phetchabun, la thèse offre les apports suivants. Elle démontre que contrairement à l’idée répandue en Thaïlande, le ralentissement de la déforestation a été suivi par une expansion forestière substantielle entre environ 1995 et 2005. Ce regain forestier est lié à la disparition presque complète de l’expansion agricole, à l’établissement de plantations sylvicoles et, surtout, à l’abandon de terres agricoles. Cet abandon agricole découle d’abord et avant tout de la faible et incertaine rentabilité de l’agriculture dans certaines zones non irriguées. Ce phénomène s’explique, entre autres, par la dégradation des sols et par l’incapacité des agriculteurs à contrer l’impact des transformations économiques internes et externes à la Thaïlande. L’accroissement de la pression de conservation n’a pu contribuer à l’expansion forestière que dans certains contextes (projets de reforestation majeurs appuyés par l’armée, communautés divisées, terres déjà abandonnées). Sans en être une cause directe, l’intensification agricole et la croissance des secteurs non agricoles ont rendu moins pénibles la confiscation et l’abandon des terres et ont permis que de tels phénomènes surviennent sans entraîner d’importants troubles sociaux. Dans un contexte d’accroissement des prix agricoles, notamment celui du caoutchouc naturel, une partie du regain forestier aurait été perdu depuis 2005 en raison d’une ré-expansion des surfaces agricoles. Cela illustre le caractère non permanent de la transition forestière et la faiblesse des mesures de conservation lorsque les perspectives de profit sont grandes. La thèse montre que, pour être robuste, une théorie de la transition forestière doit être contingente et reconnaître que les variables macro-sociales fréquemment invoquées pour expliquer les transitions forestières (ex. : démocratisation, intensification agricole, croissance économique) peuvent aussi leur nuire. Une telle théorie doit également prendre en compte des éléments d’explication non strictement économiques et souvent négligés (menaces à la sécurité nationale, épuisement des terres perçues comme arables et libres, degré d’attachement aux terres et capacité d’adaptation et résilience des systèmes agricoles). Finalement, les écrits sur la transition forestière doivent reconnaître qu’elle a généralement impliqué des impacts sociaux et même environnementaux négatifs. Une lecture de la transition forestière plus nuancée et moins marquée par l’obsession de la seule reforestation est seule garante d’une saine gestion de l’environnement en respect avec les droits humains, la justice sociale et le développement durable.

Design thinking and the precautionary principle : development of a theoretical model complementing preventive judgment for design for sustainability enriched through a study of architectural competitions adopting LEED

Cette thèse contribue à une théorie générale de la conception du projet. S’inscrivant dans une demande marquée par les enjeux du développement durable, l’objectif principal de cette recherche est la contribution d’un modèle théorique de la conception permettant de mieux situer l’utilisation des outils et des normes d’évaluation de la durabilité d’un projet. Les principes fondamentaux de ces instruments normatifs sont analysés selon quatre dimensions : ontologique, méthodologique, épistémologique et téléologique. Les indicateurs de certains effets contre-productifs reliés, en particulier, à la mise en compte de ces normes confirment la nécessité d’une théorie du jugement qualitatif. Notre hypothèse principale prend appui sur le cadre conceptuel offert par la notion de « principe de précaution » dont les premières formulations remontent du début des années 1970, et qui avaient précisément pour objectif de remédier aux défaillances des outils et méthodes d’évaluation scientifique traditionnelles. La thèse est divisée en cinq parties. Commençant par une revue historique des modèles classiques des théories de la conception (design thinking) elle se concentre sur l’évolution des modalités de prise en compte de la durabilité. Dans cette perspective, on constate que les théories de la « conception verte » (green design) datant du début des années 1960 ou encore, les théories de la « conception écologique » (ecological design) datant des années 1970 et 1980, ont finalement convergé avec les récentes théories de la «conception durable» (sustainable design) à partir du début des années 1990. Les différentes approches du « principe de précaution » sont ensuite examinées sous l’angle de la question de la durabilité du projet. Les standards d’évaluation des risques sont comparés aux approches utilisant le principe de précaution, révélant certaines limites lors de la conception d’un projet. Un premier modèle théorique de la conception intégrant les principales dimensions du principe de précaution est ainsi esquissé. Ce modèle propose une vision globale permettant de juger un projet intégrant des principes de développement durable et se présente comme une alternative aux approches traditionnelles d’évaluation des risques, à la fois déterministes et instrumentales. L’hypothèse du principe de précaution est dès lors proposée et examinée dans le contexte spécifique du projet architectural. Cette exploration débute par une présentation de la notion classique de «prudence» telle qu’elle fut historiquement utilisée pour guider le jugement architectural. Qu’en est-il par conséquent des défis présentés par le jugement des projets d’architecture dans la montée en puissance des méthodes d’évaluation standardisées (ex. Leadership Energy and Environmental Design; LEED) ? La thèse propose une réinterprétation de la théorie de la conception telle que proposée par Donald A. Schön comme une façon de prendre en compte les outils d’évaluation tels que LEED. Cet exercice révèle cependant un obstacle épistémologique qui devra être pris en compte dans une reformulation du modèle. En accord avec l’épistémologie constructiviste, un nouveau modèle théorique est alors confronté à l’étude et l’illustration de trois concours d'architecture canadienne contemporains ayant adopté la méthode d'évaluation de la durabilité normalisée par LEED. Une série préliminaire de «tensions» est identifiée dans le processus de la conception et du jugement des projets. Ces tensions sont ensuite catégorisées dans leurs homologues conceptuels, construits à l’intersection du principe de précaution et des théories de la conception. Ces tensions se divisent en quatre catégories : (1) conceptualisation - analogique/logique; (2) incertitude - épistémologique/méthodologique; (3) comparabilité - interprétation/analytique, et (4) proposition - universalité/ pertinence contextuelle. Ces tensions conceptuelles sont considérées comme autant de vecteurs entrant en corrélation avec le modèle théorique qu’elles contribuent à enrichir sans pour autant constituer des validations au sens positiviste du terme. Ces confrontations au réel permettent de mieux définir l’obstacle épistémologique identifié précédemment. Cette thèse met donc en évidence les impacts généralement sous-estimés, des normalisations environnementales sur le processus de conception et de jugement des projets. Elle prend pour exemple, de façon non restrictive, l’examen de concours d'architecture canadiens pour bâtiments publics. La conclusion souligne la nécessité d'une nouvelle forme de « prudence réflexive » ainsi qu’une utilisation plus critique des outils actuels d’évaluation de la durabilité. Elle appelle une instrumentalisation fondée sur l'intégration globale, plutôt que sur l'opposition des approches environnementales.

Vers des aménagements multifonctionnels en zone d'intensification agricole : portée et limites des politiques et pratiques québécoises

Certains territoires caractérisés par une concentration et une intensification de l’agriculture se trouvent aujourd’hui devant des défis environnementaux et sociaux, notamment en ce qui a trait à la qualité des cadres de vie. À cet effet, une panoplie de mesures agroenvironnementales et de cohabitation (lois, programmes, etc.) sont aujourd’hui à la disposition des professionnels de l’aménagement au Québec. Cette recherche s’interroge sur le potentiel de ces outils à réintroduire le caractère multifonctionnel des territoires, c'est-àdire à assurer la prise en compte simultanée de plusieurs fonctions. Pour ce faire, la mise en oeuvre hypothétique de scénarios d’aménagement multifonctionnel issus d’une recherche antérieure est utilisée comme test. La première étape identifie et analyse les outils favorisant la multifonctionnalité des territoires agricoles et formule des hypothèses quant aux blocages qui pourraient limiter la mise en oeuvre des scénarios multifonctionnels. La deuxième étape teste ces hypothèses en faisant intervenir des groupes de discussion rassemblant divers professionnels de l’aménagement à l’échelle supra locale (municipalité régionale de comté). Les résultats témoignent du potentiel des projets d’aménagement conçus à l’échelle du territoire, notamment ceux visant des regroupements de producteurs. Toutefois, l’étude montre que les blocages ne tiennent pas seulement aux caractéristiques des outils en place, mais aussi à la réticence des professionnels à prendre en compte la notion de cadre de vie en zone d’intensification agricole. Quant à l’utilité pour le monde de la pratique de scénarios d’aménagement multifonctionnel issus d’une recherche universitaire, elle s’en trouverait grandement accrue dans un contexte où les professionnels de l’aménagement participeraient à leur construction.