A note on the selection of priority rules in software packages for project management

Various software packages for project management include a procedure for resource-constrained scheduling. In several packages, the user can influence this procedure by selecting a priority rule. However, the resource-allocation methods that are implemented in the procedures are proprietary information; therefore, the question of how the priority-rule selection impacts the performance of the procedures arises. We experimentally evaluate the resource-allocation methods of eight recent software packages using the 600 instances of the PSPLIB J120 test set. The results of our analysis indicate that applying the default rule tends to outperform a randomly selected rule, whereas applying two randomly selected rules tends to outperform the default rule. Applying a small set of more than two rules further improves the project durations considerably. However, a large number of rules must be applied to obtain the best possible project durations.

Non-metastatic castrate-resistant prostate cancer: a call for improved guidance on clinical management.

BACKGROUND Guidelines on the clinical management of non-metastatic castrate-resistant prostate cancer (nmCRPC) generally focus on the need to continue androgen deprivation therapy and enrol patients into clinical trials of investigational agents. This guidance reflects the lack of clinical trial data with established agents in the nmCRPC patient population and the need for trials of new agents. AIM To review the evidence base and consider ways of improving the management of nmCRPC. CONCLUSION Upon the development of castrate resistance, it is essential to rule out the presence of metastases or micrometastases by optimising the use of bone scans and possibly newer procedures and techniques. When nmCRPC is established, management decisions should be individualised according to risk, but risk stratification in this diverse population is poorly defined. Currently, prostate-specific antigen (PSA) levels and PSA doubling time remain the best method of assessing the risk of progression and response to treatment in nmCRPC. However, optimising imaging protocols can also help assess the changing metastatic burden in patients with CRPC. Clinical trials of novel agents in nmCRPC are limited and have problems with enrolment, and therefore, improved risk stratification and imaging may be crucial to the improved management. The statements presented in this paper, reflecting the views of the authors, provide a discussion of the most recent evidence in nmCRPC and provide some advice on how to ensure these patients receive the best management available. However, there is an urgent need for more data on the management of nmCRPC.

Photon Management Structures for Absorption Enhancement in Intermediate Band Solar Cells and Crystalline Silicon Solar Cells

El objetivo de la tesis es investigar los beneficios que el atrapamiento de la luz mediante fenómenos difractivos puede suponer para las células solares de silicio cristalino y las de banda intermedia. Ambos tipos de células adolecen de una insuficiente absorción de fotones en alguna región del espectro solar. Las células solares de banda intermedia son teóricamente capaces de alcanzar eficiencias mucho mayores que los dispositivos convencionales (con una sola banda energética prohibida), pero los prototipos actuales se resienten de una absorción muy débil de los fotones con energías menores que la banda prohibida. Del mismo modo, las células solares de silicio cristalino absorben débilmente en el infrarrojo cercano debido al carácter indirecto de su banda prohibida. Se ha prestado mucha atención a este problema durante las últimas décadas, de modo que todas las células solares de silicio cristalino comerciales incorporan alguna forma de atrapamiento de luz. Por razones de economía, en la industria se persigue el uso de obleas cada vez más delgadas, con lo que el atrapamiento de la luz adquiere más importancia. Por tanto aumenta el interés en las estructuras difractivas, ya que podrían suponer una mejora sobre el estado del arte. Se comienza desarrollando un método de cálculo con el que simular células solares equipadas con redes de difracción. En este método, la red de difracción se analiza en el ámbito de la óptica física, mediante análisis riguroso con ondas acopladas (rigorous coupled wave analysis), y el sustrato de la célula solar, ópticamente grueso, se analiza en los términos de la óptica geométrica. El método se ha implementado en ordenador y se ha visto que es eficiente y da resultados en buen acuerdo con métodos diferentes descritos por otros autores. Utilizando el formalismo matricial así derivado, se calcula el límite teórico superior para el aumento de la absorción en células solares mediante el uso de redes de difracción. Este límite se compara con el llamado límite lambertiano del atrapamiento de la luz y con el límite absoluto en sustratos gruesos. Se encuentra que las redes biperiódicas (con geometría hexagonal o rectangular) pueden producir un atrapamiento mucho mejor que las redes uniperiódicas. El límite superior depende mucho del periodo de la red. Para periodos grandes, las redes son en teoría capaces de alcanzar el máximo atrapamiento, pero sólo si las eficiencias de difracción tienen una forma peculiar que parece inalcanzable con las herramientas actuales de diseño. Para periodos similares a la longitud de onda de la luz incidente, las redes de difracción pueden proporcionar atrapamiento por debajo del máximo teórico pero por encima del límite Lambertiano, sin imponer requisitos irrealizables a la forma de las eficiencias de difracción y en un margen de longitudes de onda razonablemente amplio. El método de cálculo desarrollado se usa también para diseñar y optimizar redes de difracción para el atrapamiento de la luz en células solares. La red propuesta consiste en un red hexagonal de pozos cilíndricos excavados en la cara posterior del sustrato absorbente de la célula solar. La red se encapsula en una capa dieléctrica y se cubre con un espejo posterior. Se simula esta estructura para una célula solar de silicio y para una de banda intermedia y puntos cuánticos. Numéricamente, se determinan los valores óptimos del periodo de la red y de la profundidad y las dimensiones laterales de los pozos para ambos tipos de células. Los valores se explican utilizando conceptos físicos sencillos, lo que nos permite extraer conclusiones generales que se pueden aplicar a células de otras tecnologías. Las texturas con redes de difracción se fabrican en sustratos de silicio cristalino mediante litografía por nanoimpresión y ataque con iones reactivos. De los cálculos precedentes, se conoce el periodo óptimo de la red que se toma como una constante de diseño. Los sustratos se procesan para obtener estructuras precursoras de células solares sobre las que se realizan medidas ópticas. Las medidas de reflexión en función de la longitud de onda confirman que las redes cuadradas biperiódicas consiguen mejor atrapamiento que las uniperiódicas. Las estructuras fabricadas se simulan con la herramienta de cálculo descrita en los párrafos precedentes y se obtiene un buen acuerdo entre la medida y los resultados de la simulación. Ésta revela que una fracción significativa de los fotones incidentes son absorbidos en el reflector posterior de aluminio, y por tanto desaprovechados, y que este efecto empeora por la rugosidad del espejo. Se desarrolla un método alternativo para crear la capa dieléctrica que consigue que el reflector se deposite sobre una superficie plana, encontrándose que en las muestras preparadas de esta manera la absorción parásita en el espejo es menor. La siguiente tarea descrita en la tesis es el estudio de la absorción de fotones en puntos cuánticos semiconductores. Con la aproximación de masa efectiva, se calculan los niveles de energía de los estados confinados en puntos cuánticos de InAs/GaAs. Se emplea un método de una y de cuatro bandas para el cálculo de la función de onda de electrones y huecos, respectivamente; en el último caso se utiliza un hamiltoniano empírico. La regla de oro de Fermi permite obtener la intensidad de las transiciones ópticas entre los estados confinados. Se investiga el efecto de las dimensiones del punto cuántico en los niveles de energía y la intensidad de las transiciones y se obtiene que, al disminuir la anchura del punto cuántico respecto a su valor en los prototipos actuales, se puede conseguir una transición más intensa entre el nivel intermedio fundamental y la banda de conducción. Tomando como datos de partida los niveles de energía y las intensidades de las transiciones calculados como se ha explicado, se desarrolla un modelo de equilibrio o balance detallado realista para células solares de puntos cuánticos. Con el modelo se calculan las diferentes corrientes debidas a transiciones ópticas entre los numerosos niveles intermedios y las bandas de conducción y de valencia bajo ciertas condiciones. Se distingue de modelos de equilibrio detallado previos, usados para calcular límites de eficiencia, en que se adoptan suposiciones realistas sobre la absorción de fotones para cada transición. Con este modelo se reproducen datos publicados de eficiencias cuánticas experimentales a diferentes temperaturas con un acuerdo muy bueno. Se muestra que el conocido fenómeno del escape térmico de los puntos cuánticos es de naturaleza fotónica; se debe a los fotones térmicos, que inducen transiciones entre los estados excitados que se encuentran escalonados en energía entre el estado intermedio fundamental y la banda de conducción. En el capítulo final, este modelo realista de equilibrio detallado se combina con el método de simulación de redes de difracción para predecir el efecto que tendría incorporar una red de difracción en una célula solar de banda intermedia y puntos cuánticos. Se ha de optimizar cuidadosamente el periodo de la red para equilibrar el aumento de las diferentes transiciones intermedias, que tienen lugar en serie. Debido a que la absorción en los puntos cuánticos es extremadamente débil, se deduce que el atrapamiento de la luz, por sí solo, no es suficiente para conseguir corrientes apreciables a partir de fotones con energía menor que la banda prohibida en las células con puntos cuánticos. Se requiere una combinación del atrapamiento de la luz con un incremento de la densidad de puntos cuánticos. En el límite radiativo y sin atrapamiento de la luz, se necesitaría que el número de puntos cuánticos de una célula solar se multiplicara por 1000 para superar la eficiencia de una célula de referencia con una sola banda prohibida. En cambio, una célula con red de difracción precisaría un incremento del número de puntos en un factor 10 a 100, dependiendo del nivel de la absorción parásita en el reflector posterior. Abstract The purpose of this thesis is to investigate the benefits that diffractive light trapping can offer to quantum dot intermediate band solar cells and crystalline silicon solar cells. Both solar cell technologies suffer from incomplete photon absorption in some part of the solar spectrum. Quantum dot intermediate band solar cells are theoretically capable of achieving much higher efficiencies than conventional single-gap devices. Present prototypes suffer from extremely weak absorption of subbandgap photons in the quantum dots. This problem has received little attention so far, yet it is a serious barrier to the technology approaching its theoretical efficiency limit. Crystalline silicon solar cells absorb weakly in the near infrared due to their indirect bandgap. This problem has received much attention over recent decades, and all commercial crystalline silicon solar cells employ some form of light trapping. With the industry moving toward thinner and thinner wafers, light trapping is becoming of greater importance and diffractive structures may offer an improvement over the state-of-the-art. We begin by constructing a computational method with which to simulate solar cells equipped with diffraction grating textures. The method employs a wave-optical treatment of the diffraction grating, via rigorous coupled wave analysis, with a geometric-optical treatment of the thick solar cell bulk. These are combined using a steady-state matrix formalism. The method has been implemented computationally, and is found to be efficient and to give results in good agreement with alternative methods from other authors. The theoretical upper limit to absorption enhancement in solar cells using diffractions gratings is calculated using the matrix formalism derived in the previous task. This limit is compared to the so-called Lambertian limit for light trapping with isotropic scatterers, and to the absolute upper limit to light trapping in bulk absorbers. It is found that bi-periodic gratings (square or hexagonal geometry) are capable of offering much better light trapping than uni-periodic line gratings. The upper limit depends strongly on the grating period. For large periods, diffraction gratings are theoretically able to offer light trapping at the absolute upper limit, but only if the scattering efficiencies have a particular form, which is deemed to be beyond present design capabilities. For periods similar to the incident wavelength, diffraction gratings can offer light trapping below the absolute limit but above the Lambertian limit without placing unrealistic demands on the exact form of the scattering efficiencies. This is possible for a reasonably broad wavelength range. The computational method is used to design and optimise diffraction gratings for light trapping in solar cells. The proposed diffraction grating consists of a hexagonal lattice of cylindrical wells etched into the rear of the bulk solar cell absorber. This is encapsulated in a dielectric buffer layer, and capped with a rear reflector. Simulations are made of this grating profile applied to a crystalline silicon solar cell and to a quantum dot intermediate band solar cell. The grating period, well depth, and lateral well dimensions are optimised numerically for both solar cell types. This yields the optimum parameters to be used in fabrication of grating equipped solar cells. The optimum parameters are explained using simple physical concepts, allowing us to make more general statements that can be applied to other solar cell technologies. Diffraction grating textures are fabricated on crystalline silicon substrates using nano-imprint lithography and reactive ion etching. The optimum grating period from the previous task has been used as a design parameter. The substrates have been processed into solar cell precursors for optical measurements. Reflection spectroscopy measurements confirm that bi-periodic square gratings offer better absorption enhancement than uni-periodic line gratings. The fabricated structures have been simulated with the previously developed computation tool, with good agreement between measurement and simulation results. The simulations reveal that a significant amount of the incident photons are absorbed parasitically in the rear reflector, and that this is exacerbated by the non-planarity of the rear reflector. An alternative method of depositing the dielectric buffer layer was developed, which leaves a planar surface onto which the reflector is deposited. It was found that samples prepared in this way suffered less from parasitic reflector absorption. The next task described in the thesis is the study of photon absorption in semiconductor quantum dots. The bound-state energy levels of in InAs/GaAs quantum dots is calculated using the effective mass approximation. A one- and four- band method is applied to the calculation of electron and hole wavefunctions respectively, with an empirical Hamiltonian being employed in the latter case. The strength of optical transitions between the bound states is calculated using the Fermi golden rule. The effect of the quantum dot dimensions on the energy levels and transition strengths is investigated. It is found that a strong direct transition between the ground intermediate state and the conduction band can be promoted by decreasing the quantum dot width from its value in present prototypes. This has the added benefit of reducing the ladder of excited states between the ground state and the conduction band, which may help to reduce thermal escape of electrons from quantum dots: an undesirable phenomenon from the point of view of the open circuit voltage of an intermediate band solar cell. A realistic detailed balance model is developed for quantum dot solar cells, which uses as input the energy levels and transition strengths calculated in the previous task. The model calculates the transition currents between the many intermediate levels and the valence and conduction bands under a given set of conditions. It is distinct from previous idealised detailed balance models, which are used to calculate limiting efficiencies, since it makes realistic assumptions about photon absorption by each transition. The model is used to reproduce published experimental quantum efficiency results at different temperatures, with quite good agreement. The much-studied phenomenon of thermal escape from quantum dots is found to be photonic; it is due to thermal photons, which induce transitions between the ladder of excited states between the ground intermediate state and the conduction band. In the final chapter, the realistic detailed balance model is combined with the diffraction grating simulation method to predict the effect of incorporating a diffraction grating into a quantum dot intermediate band solar cell. Careful optimisation of the grating period is made to balance the enhancement given to the different intermediate transitions, which occur in series. Due to the extremely weak absorption in the quantum dots, it is found that light trapping alone is not sufficient to achieve high subbandgap currents in quantum dot solar cells. Instead, a combination of light trapping and increased quantum dot density is required. Within the radiative limit, a quantum dot solar cell with no light trapping requires a 1000 fold increase in the number of quantum dots to supersede the efficiency of a single-gap reference cell. A quantum dot solar cell equipped with a diffraction grating requires between a 10 and 100 fold increase in the number of quantum dots, depending on the level of parasitic absorption in the rear reflector.

The optimal allocation rule and the water market as the most effective tools of managing water shortage in an irrigation district

The conference program will cover all areas of environmental and resource economics, ranging from topics prevailing in the general debate, such as climate change, energy sources, water management and ecosystem services evaluation, to more specialized subjects such as biodiversity conservation or persistent organic pollutants. The congress will be held on the Faculty of Economics of the University of Girona, located in Montilivi, a city quarter situated just few minutes from the city center, conveniently connected by bus lines L8 and L11.

A responsabilidade civil dos administradores de companhias abertas: artigo 159, § 6°, LSA e a Business Judgment Rule

O estudo da responsabilidade civil dos administradores de companhias abertas na doutrina nacional trata usualmente dos deveres fiduciários, do ato regular de gestão e da teoria ultra vires, da culpa ou dolo do administrador, das ações ut universi e ut singuli e da solidariedade entre a responsabilidade do administrador e a da companhia. Poucos abordam as causas extintivas dessa responsabilidade, e raro são os que tratam da hipótese de exclusão de responsabilidade do artigo 159, § 6º, da Lei nº 6.404/76. Como a disciplina dos deveres fiduciários prevista na lei societária brasileira tem forte influência do Direito norte-americano, buscou-se na legislação, doutrina e jurisprudência daquele país os fundamentos necessários à melhor interpretação e aplicação da regra de exclusão e, em especial, na business judgment rule, doutrina que protege os administradores contra responsabilização por prejuízos à companhia decorrentes de decisões por eles adotadas, proteção esta também conferida pela hipótese do artigo 159, § 6º, da Lei nº 6.404/76, ao administrador leal e de boa-fé.

Comment on Rule 14a-8(i)(9), Securities and Exchange Commission, June 30, 2015

The Securities and Exchange Commission has been analyzing its interpretation under Subsection (i)(9) of Rule 14a-8. This provision allows for the exclusion of shareholder proposals that conflict with those submitted by management. The staff has been examining its interpretation since instructed to do so by the chair of the SEC following a no action appeal in a case involving Whole Foods. A number of letters and memos submitted in connection with the review have analyzed the issue. At least one asserted that any change in interpretation required the Commission to go through the process of notice and comment. This letter asserts that notice and comment is not required, relying extensively on Perez v. Mortgage Bankers Association.

The Economic impact of proposed regulation 79-11 to allow a relaxation of APC rule 203 (g) for particulate matter /

"Project no. 10.088."

A rule based model for the objective determination of the e-business requirements of a manufacturing organisation

The starting point of this research was the belief that manufacturing and similar industries need help with the concept of e-business, especially in assessing the relevance of possible e-business initiatives. The research hypotheses was that it should be possible to produce a systematic model that defines, at a useful level of detail, the probable e-business requirements of an organisation based on objective criteria with an accuracy of 85%-90%. This thesis describes the development and validation of such a model. A preliminary model was developed from a variety of sources, including a survey of current and planned e-business activity and representative examples of e-business material produced by e-business solution providers. The model was subject to a process of testing and refinement based on recursive case studies, with controls over the improving accuracy and stability of the model. Useful conclusions were also possible as to the relevance of e-business functions to the case study participants themselves. Techniques were evolved to synthesise the e-business requirements of an organisation and present them at a management summary level of detail. The results of applying these techniques to all the case studies used in this research were discussed. The conclusion of the research was that the case study methodology employed was successful. A model was achieved suitable for practical application in a manufacturing organisation requiring help with a requirements definition process.

CloudMPL:a domain specific language for describing management policies for an autonomic cloud infrastructure

To benefit from the advantages that Cloud Computing brings to the IT industry, management policies must be implemented as a part of the operation of the Cloud. Among others, for example, the specification of policies can be used for the management of energy to reduce the cost of running the IT system or also for security policies while handling privacy issues of users. As cloud platforms are large, manual enforcement of policies is not scalable. Hence, autonomic approaches for management policies have recently received a considerable attention. These approaches allow specification of rules that are executed via rule-engines. The process of rules creation starts by the interpretation of the policies drafted by high-rank managers. Then, technical IT staff translate such policies to operational activities to implement them. Such process can start from a textual declarative description and after numerous steps terminates in a set of rules to be executed on a rule engine. To simplify the steps and to bridge the considerable gap between the declarative policies and executable rules, we propose a domain-specific language called CloudMPL. We also design a method of automated transformation of the rules captured in CloudMPL to the popular rule-engine Drools. As the policies are changed over time, code generation will reduce the time required for the implementation of the policies. In addition, using a declarative language for writing the specifications is expected to make the authoring of rules easier. We demonstrate the use of the CloudMPL language into a running example extracted from a management energy consumption case study.

Restaurant Industry Perspectives on Pro-social Rule Breaking: Intent versus Action

The resounding message extracted from the service literature is that employees serve pivotal functions in the overall guest experience. This is of course due to the simultaneous delivery of personalized service provision with resultant consumption of those services. This simultaneous delivery and consumption cycle is at times challenged by a perceived desire to accommodate guest request that may violate, to a greater or lesser degree, an organizational rule. This is important to note because increased interactions with customers enable frontline employees to have a better sense of what customers want from the company as well as from the company itself (Bitner, et al, 1994). With that platform established, then why are some employees willing to break organizational rules and risk disciplinary action to better service a customer? This study examines the employee personality, degree of autonomy, job meaning, and co-worker influence on an employee's decision to break organizational rules. The results of this study indicate that co-worker influence exerted a minimal influence on employee decision to break rules while the presence of societal consciousness exerted a much stronger influence. Women reported that they were less likely to engage in rule divergence, and significant correlations were present when filtered by years in current position, and years in the industry.

Database As A Tool For Hospitality Management

In his discussion - Database As A Tool For Hospitality Management - William O'Brien, Assistant Professor, School of Hospitality Management at Florida International University, O’Brien offers at the outset, “Database systems offer sweeping possibilities for better management of information in the hospitality industry. The author discusses what such systems are capable of accomplishing.” The author opens with a bit of background on database system development, which also lends an impression as to the complexion of the rest of the article; uh, it’s a shade technical. “In early 1981, Ashton-Tate introduced dBase 11. It was the first microcomputer database management processor to offer relational capabilities and a user-friendly query system combined with a fast, convenient report writer,” O’Brien informs. “When 16-bit microcomputers such as the IBM PC series were introduced late the following year, more powerful database products followed: dBase 111, Friday!, and Framework. The effect on the entire business community, and the hospitality industry in particular, has been remarkable”, he further offers with his informed outlook. Professor O’Brien offers a few anecdotal situations to illustrate how much a comprehensive data-base system means to a hospitality operation, especially when billing is involved. Although attitudes about computer systems, as well as the systems themselves have changed since this article was written, there is pertinent, fundamental information to be gleaned. In regards to the digression of the personal touch when a customer is engaged with a computer system, O’Brien says, “A modern data processing system should not force an employee to treat valued customers as numbers…” He also cautions, “Any computer system that decreases the availability of the personal touch is simply unacceptable.” In a system’s ability to process information, O’Brien suggests that in the past businesses were so enamored with just having an automated system that they failed to take full advantage of its capabilities. O’Brien says that a lot of savings, in time and money, went un-noticed and/or under-appreciated. Today, everyone has an integrated system, and the wise business manager is the business manager who takes full advantage of all his resources. O’Brien invokes the 80/20 rule, and offers, “…the last 20 percent of results costs 80 percent of the effort. But times have changed. Everyone is automating data management, so that last 20 percent that could be ignored a short time ago represents a significant competitive differential.” The evolution of data systems takes center stage for much of the article; pitfalls also emerge.

Current State of Management/Union Relations in Hospitality Sector

Labor management relations in the hospitality sector is an important aspect of effective management. Increasingly, unions are becoming proactive in organizing hospitality workers. This manifests itself in strikes, boycotts, picketing, sexual harassment complaints, and complaints to OSHA regarding safety and health workplace violations. This research monitors the current scene with respect to labor management relations and analyzes work issues that have been brought up for third-party resolution by NLRB staff or arbitrators. The study reports on 66 NLRB cases and 104 arbitration cases. Issues brought before the NLRB include mostly contract interpretations. In arbitration, there were mostly discipline issues, including work rule violations, disorderly conduct, poor performance and employee theft. Quite often, the proposed job action on the part of the employer was discharge. In NLRB cases, the employee usually prevailed, while in arbitration the employer usually prevailed.

Comparing novice designer performance using a rule -based approach versus a pattern -based approach in conceptual data modeling tasks

Conceptual database design is an unusually difficult and error-prone task for novice designers. This study examined how two training approaches---rule-based and pattern-based---might improve performance on database design tasks. A rule-based approach prescribes a sequence of rules for modeling conceptual constructs, and the action to be taken at various stages while developing a conceptual model. A pattern-based approach presents data modeling structures that occur frequently in practice, and prescribes guidelines on how to recognize and use these structures. This study describes the conceptual framework, experimental design, and results of a laboratory experiment that employed novice designers to compare the effectiveness of the two training approaches (between-subjects) at three levels of task complexity (within subjects). Results indicate an interaction effect between treatment and task complexity. The rule-based approach was significantly better in the low-complexity and the high-complexity cases; there was no statistical difference in the medium-complexity case. Designer performance fell significantly as complexity increased. Overall, though the rule-based approach was not significantly superior to the pattern-based approach in all instances, it out-performed the pattern-based approach at two out of three complexity levels. The primary contributions of the study are (1) the operationalization of the complexity construct to a degree not addressed in previous studies; (2) the development of a pattern-based instructional approach to database design; and (3) the finding that the effectiveness of a particular training approach may depend on the complexity of the task.

Restaurant Industry Perspectives on Pro-social Rule Breaking: Intent versus Action

The resounding message extracted from the service literature is that employees serve pivotal functions in the overall guest experience. This is of course due to the simultaneous delivery of personalized service provision with resultant consumption of those services. This simultaneous delivery and consumption cycle is at times challenged by a perceived desire to accommodate guest request that may violate, to a greater or lesser degree, an organizational rule. This is important to note because increased interactions with customers enable frontline employees to have a better sense of what customers want from the company as well as from the company itself (Bitner, et al, 1994). With that platform established, then why are some employees willing to break organizational rules and risk disciplinary action to better service a customer? This study examines the employee personality, degree of autonomy, job meaning, and co-worker influence on an employee's decision to break organizational rules. The results of this study indicate that co-worker influence exerted a minimal influence on employee decision to break rules while the presence of societal consciousness exerted a much stronger influence. Women reported that they were less likely to engage in rule divergence, and significant correlations were present when filtered by years in current position, and years in the industry.