Increased salivary immunoglobulin A and reduced alpha-amylase activity in whole saliva from spastic cerebral palsy individuals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Live High-Train High increases hemoglobin mass in Olympic swimmers

This study tested whether 3-4 weeks of classical Live High-Train High (LHTH) altitude training increases swim-specific VO2max through increased hemoglobin mass (Hb(mass)).Ten swimmers lived and trained for more than 3 weeks between 2,130 and 3,094 m of altitude, and a control group of ten swimmers followed the same training at sea-level (SL). Body composition was examined using dual X-ray absorptiometry. Hb(mass) was determined by carbon monoxide rebreathing. Swimming VO2peak was determined and swimming trials of 4 x 50, 200 and 3,000 m were performed before and after the intervention.Hb(mass) (n = 10) was increased (P < 0.05)after altitude training by 6.2 +/- A 3.9 % in the LHTH group, whereas no changes were apparent in the SL group (n = 10). Swimming VO2peak was similar before and after training camps in both groups (LHTH: n = 7, SL: n = 6). Performance of 4 x 50 m at race pace was improved to a similar degree in both groups (LHTH: n = 10, SL: n = 10). Maximal speed reached in an incremental swimming step test (P = 0.051), and time to complete 3,000 m tended (P = 0.09) to be more improved after LHTH (n = 10) than SL training (n = 10).In conclusion, 3-4 weeks of classical LHTH is sufficient to increase Hb(mass) but exerts no effect on swimming-specific VO2peak. LHTH may improve performance more than SL training.

PLA/PGA copolymer as a bone substitute in maxillary sinus augmentation: histological, histometric and immunohistochemistry study in rabbits

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Study of temperature variation in cortical bone during osteotomies with trephine drills

The purpose of this study was to compare temperature variation during osteotomies with trephine drills under different irrigation conditions: without irrigation, external irrigation, and double irrigation.Synthetic blocks of bone (type I density) were used for drilling procedures with an experimental computed machine, which measured the maximum temperature in the cortical bone during osteotomy with a bone cut that was 5 mm in both diameter and depth. Three groups were formed depending on the irrigation conditions: no irrigation (G1), external irrigation (G2), and double irrigation (G3). Fifty drillings were performed for each group.The average thermal increase in the groups was 21.7 +/- 1.52 A degrees C in G1, 14.2 A +/- 0.70 A degrees C in G2, and 12.4 A +/- 0.75 A degrees C in G3. The results presented statistically significant differences among all groups (alpha = 0.05).The double irrigation technique resulted in a smaller increase in temperature in the cortical bone model, demonstrating a greater efficiency, which may be beneficial when compared to external irrigation alone.The trephine has been widely used in removing small blocks for bone graft, especially the posterior mandible, where the possibility of heating may be higher due to the density of cortical bone in this area. So it is important that the professionals select instruments that can reduce the risks of complications in the proposed treatment.

Effects of coronal leakage on concentration of hydrogen ions and calcium hydroxide release of several calcium hydroxide pastes over different periods of time

Purpose: To evaluate the effects of coronal leakage on concentration of hydrogen ions (pH) and calcium release of several calcium hydroxide pastes, over different periods of time. Material and Methods: Fifty extracted human mandibular central incisors (n=10) were instrumented up to the F2 instrument and assigned to the following intracanal dressing: G1- Calen, G2- Calen with 0.4% chlorhexidine (CHX), G3- Calcium hydroxide with camphorated paramonochlorophenol (CPMC) and glycerin, G4- Calen, but temporary filling material maintained during all test (positive control) and G5- Root canal without intracanal dressing (negative control). All groups were immersed in distilled water for 7 days. In sequence, the temporary filling materials were removed, except in controls groups. All specimens were individually mounted on a specific device and only its root again immersed in distilled water. Concentration of hydrogen ions and calcium release by calcium hydroxide pastes in distilled water were evaluated in 24h, 7, 14 and 28 days. The results were submitted to ANOVA test (p = 0.05). After 28 days, root canals from experimental groups were examined in SEM. Results: G1, G2, G3 and G4 presented similar pH values and calcium release and did not differ from each other (p>0.05), up to 7 days. After this time G1, G2 and G3 presented values lower values than G4 (p<0.05). In SEM analysis, calcium hydroxide residues were observed in all experimental groups. Conclusions: After 7 days, coronal leakage decreased the concentration of hydrogen ions and calcium ion release provided by all calcium hydroxide pastes.

Efeitos da flutamida na morfologia dos órgãos reprodutivos e fígado de Rhinella schneideri (Anura: Bufonidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tratamento cirúrgico comparado ao tratamento clínico na miastenia gravis: revisão sistemática e matanálise

Pós-graduação em Bases Gerais da Cirurgia - FMB

Adjuvant therapy with sodium alendronate for the treatment of experimental periodontitis in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação comparativa da mecânica ventilatória de pacientes com lesão renal aguda submetidos a hemodiálise diária ou a diálise peritoneal contínua

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização morfológica e cristalográfica da zircônia após desgaste com pedra diamantada e elaboração de um protocolo para tratamento térmico regenerativo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Strength Training with Blood Flow Restriction Diminishes Myostatin Gene Expression

LAURENTINO, G. C., C. UGRINOWITSCH, H. ROSCHEL, M. S. AOKI, A. G. SOARES, M. NEVES JR, A. Y. AIHARA, A. DA ROCHA CORREA FERNANDES, and V. TRICOLI. Strength Training with Blood Flow Restriction Diminishes Myostatin Gene Expression. Med. Sci. Sports Exerc., Vol. 44, No. 3, pp. 406-412, 2012. Purpose: The aim of the study was to determine whether the similar muscle strength and hypertrophy responses observed after either low-intensity resistance exercise associated with moderate blood flow restriction or high-intensity resistance exercise are associated with similar changes in messenger RNA (mRNA) expression of selected genes involved in myostatin (MSTN) signaling. Methods: Twenty-nine physically active male subjects were divided into three groups: low-intensity (20% one-repetition maximum (1RM)) resistance training (LI) (n = 10), low-intensity resistance exercise associated with moderate blood flow restriction (LIR) (n = 10), and high-intensity (80% 1RM) resistance exercise (HI) (n = 9). All of the groups underwent an 8-wk training program. Maximal dynamic knee extension strength (1RM), quadriceps cross-sectional area (CSA), MSTN, follistatin-like related genes (follistatin (FLST), follistatin-like 3 (FLST-3)), activin IIb, growth and differentiation factor-associated serum protein 1 (GASP-1), and MAD-related protein (SMAD-7) mRNA gene expression were assessed before and after training. Results: Knee extension 1RM significantly increased in all groups (LI = 20.7%, LIR = 40.1%, and HI = 36.2%). CSA increased in both the LIR and HI groups (6.3% and 6.1%, respectively). MSTN mRNA expression decreased in the LIR and HI groups (45% and 41%, respectively). There were no significant changes in activin IIb (P > 0.05). FLST and FLST-3 mRNA expression increased in all groups from pre- to posttest (P < 0.001). FLST-3 expression was significantly greater in the HI when compared with the LIR and LI groups at posttest (P = 0.024 and P = 0.018, respectively). GASP-1 and SMAD-7 gene expression significantly increased in both the LIR and HI groups. Conclusions: We concluded that LIR was able to induce gains in 1RM and quadriceps CSA similar to those observed after traditional HI. These responses may be related to the concomitant decrease in MSTN and increase in FLST isoforms, GASP-1, and SMAD-7 mRNA gene expression.

In vitro evaluation of the odontogenic potential of mouse undifferentiated pulp cells

The aim of this study was to evaluate the odontogenic potential of undifferentiated pulp cells (OD-21 cell line) through chemical stimuli in vitro. Cells were divided into uninduced cells (OD-21), induced cells (OD-21 cultured in supplemented medium/OD-21+OM) and odontoblast-like cells (MDPC-23 cell line). After 3, 7, 10 and 14 days of culture, it was evaluated: proliferation and cell viability, alkaline phosphatase activity, total protein content, mineralization, immunolocalization of dentin matrix acidic phosphoprotein 1 (DMP1), alkaline phosphatase (ALP) and osteopontin (OPN) and quantification of genes ALP, OSTERIX (Osx), DMP1 and runt-related transcription factor 2 (RUNX2) through real-time polymerase chain reaction (PCR). Data were analyzed by Kruskal-Wallis and Mann-Whitney U tests (p<0.05). There was a decrease in cell proliferation in OD-21 + OM, whereas cell viability was similar in all groups, except at 7 days. The amount of total protein was higher in group OD-21 + OM in all periods; the same occurred with ALP activity after 10 days when compared with OD-21, with no significant differences from the MDPC-23 group. Mineralization was higher in OD-21+OM when compared with the negative control. Immunolocalization demonstrated that DMP1 and ALP were highly expressed in MDPC-23 cells and OD-21 + OM cells, whereas OPN was high in all groups. Real-time PCR revealed that DMP1 and ALP expression was higher in MDPC-23 cell cultures, whereas RUNX2 was lower for these cells and higher for OD-21 negative control. Osx expression was lower for OD-21 + OM. These results suggest that OD-21 undifferentiated pulp cells have odontogenic potential and could be used in dental tissue engineering.

Solving the cooling flow problem through mechanical AGN feedback

A fundamental gap in the current understanding of collapsed structures in the universe concerns the thermodynamical evolution of the ordinary, baryonic component. Unopposed radiative cooling of plasma would lead to the cooling catastrophe, a massive inflow of condensing gas toward the centre of galaxies, groups and clusters. The last generation of multiwavelength observations has radically changed our view on baryons, suggesting that the heating linked to the active galactic nucleus (AGN) may be the balancing counterpart of cooling. In this Thesis, I investigate the engine of the heating regulated by the central black hole. I argue that the mechanical feedback, based on massive subrelativistic outflows, is the key to solving the cooling flow problem, i.e. dramatically quenching the cooling rates for several billion years without destroying the cool-core structure. Using an upgraded version of the parallel 3D hydrodynamic code FLASH, I show that anisotropic AGN outflows can further reproduce fundamental observed features, such as buoyant bubbles, cocoon shocks, sonic ripples, metals dredge-up, and subsonic turbulence. The latter is an essential ingredient to drive nonlinear thermal instabilities, which cause cold gas condensation, a residual of the quenched cooling flow and, later, fuel for the AGN feedback engine. The self-regulated outflows are systematically tested on the scales of massive clusters, groups and isolated elliptical galaxies: in lighter less bound objects the feedback needs to be gentler and less efficient, in order to avoid drastic overheating. In this Thesis, I describe in depth the complex hydrodynamics, involving the coupling of the feedback energy to that of the surrounding hot medium. Finally, I present the merits and flaws of all the proposed models, with a critical eye toward observational concordance.

Synthese und 18 F-Fluorierung von Aromataseinhibitoren

ZusammenfassungrnrnrnZwei 18F-markierte Derivate des Aromataseinhibitors Letrozol 5, [18F]FML 17 und [18F]FEL 18, sowie die benötigten Markierungsvorläufer sollten im Rahmen dieser Arbeit hergestellt werden. Die Referenzverbindungen [19F]FML 17 und [19F]FEL 18 wurden synthetisiert und bei Novartis bereits auf ihre in vitro Eigenschaften untersucht. Nach erfolgreicher Radiomarkierung der beiden Derivate sollten erste in vitro und in vivo Untersuchungen mit den radiomarkierten Verbindungen durchgeführt werden. Zusätzlich zu diesen beiden Derivaten wurde ein drittes radiofluoriertes Letrozolderivat, [18F]FPL 19, und der entsprechende Markierungsvorläufer synthetisiert.rnrnZur Direktmarkierung von [18F]FML 17 mit [18F]Fluorid wurden drei Markierungsvorläufer mit verschiedenen Abgangsgruppen (TosMV-FML 7, MesMV-FML 8 and BrMV-FML 20) in 68 %, 66 % und 30 % Ausbeute hergestellt. Die Radiomarkierung von TosMV-FML 7 lieferte [18F]FML 17 in max. 30 % Ausbeute. Die Markierungsausbeuten waren unstabil und nicht reproduzierbar. Versuche, die Markierungsausbeuten durch Variation von Reaktionsparametern wie Temperatur, Lösungsmittel und Basensystem zu optimieren und zu stabilisiern, blieben erfolglos. Die Radiomarkierungsversuche der beiden anderen Markierungsvorläufer, MesMV-FML 8 und BrMV-FML 20, ergaben ebenfalls nicht das gewünschte Produkt [18F]FML 17.rnrnUm radiofluoriertes [18F]FEL 18 zu erhalten, wurden zwei Strategien untersucht. Ein Ansatz ist eine 18F-Direktmarkierung geeigneter Markierungsvorläufer, die andere Strategie eine 18F Fluoralkylierung von Letrozol 5 mit prosthetischen Gruppen wie 2-[18F]Fluorethyltosylat ([18F]FETos) oder 1-Brom-2-[18F]fluorethan ([18F]BFE). Im letzten Schritt der Synthese der Direktmarkierungsvorläufer konnten die benötigten Markierungsvorläufer nicht isoliert werden. Stattdessen wurde die Bildung von Nebenprodukten beobachtet. Die Radiomarkierung von Letrozol 5 mit [18F]FETos oder [18F]BFE ergab kein [18F]FEL 18. Im Verlauf der Radiomarkierung wurde die Bildung eines nicht radioaktiven Nebenproduktes beobachtet. Die Verwendung von Iodid-Salzen zur in situ-Bildung von 1-[18F]Fluor-2-iodethan, eines noch reaktiveren Fluoralkylierungsagens, konnte das Ergebnis der Radiomarkierungsreaktionen nicht verbessern.rnrnDie Synthese des dritten Letrozolderivates, [18F]FPL 19, verlief erfolgreich. Der benötigte Markierungsvorläufer zur Direktmarkierung mit 18F, TosMV-FPL 16, konnte in 59 % Ausbeute hergestellt werden. Das Einfügen einer dritten Methylengruppe zwischen dem Letrozolrest und dem radioaktiven Label führte zu stabilen, reproduzierbaren radiochemischen Ausbeuten zwischen 30 % und 45 %.rnrnDa die radiochemischen Ausbeuten der 18F-Direktmarkierung des TosMV-FML 7 zur Herstellung von [18F]FML 17 nicht stabilisiert werden konnten, wurden keine weitereführenden in vitro oder in vivo Untersuchungen vorgenommen. Die radiomarkierte Verbindung [18F]FEL 18 konnte über keine der beiden Markierungsstrategien synthetisiert werden. Daher konnten keine in vitro oder in vivo Experimente durchgeführt werden. Die erfolgreiche Radiomarkierung des neuen dritten Letrozolderivates, [18F]FPL 19, macht nun weitere in vitro und in vivo Testungen der 19F Referenzverbindung und des 18F-Analogs erforderlich. Ähnliche Eigenschaften wie für die beiden bereits evaluierten Verbindungen, FML 17 and FEL 18, können erwartet werden.rnrnDiese Arbeit entstand im Rahmen einer Kooperation zwischen der Novartis International AG, Basel und der Johannes Gutenberg-Universität Mainz.rnrn

MikroSISAK für die Chemie der schwersten Elemente

ZusammenfassungrnDie vorliegende Arbeit beschreibt Experimente mit einer Apparatur namens Mikro-rnSISAK, die in der Lage ist, eine Flüssig-Flüssig-Extraktion im Mikroliter-Maßstab durchzuführen. Dabei werden zwei nicht mischbare Flüssigkeiten in einer Mikrostruktur emulgiert und anschließend über eine Teflonmembran wieder entmischt.rnIn ersten Experimenten wurden verschiedene Extraktionssysteme für Elemente derrnGruppen 4 und 7 des Periodensystems der Elemente untersucht und die Ergebnisse mit denen aus Schüttelversuchen verglichen. Da die zunächst erreichten Extraktionsausbeuten nicht ausreichend waren, wurden verschiedene Maßnahmen zu deren Verbesserung herangezogen.rnZunächst hat man mit Hilfe eines an die MikroSISAK-Apparatur angelegten Heizelements die dort für die Extraktion herrschende Temperatur erhöht. Dies führte wie erhofft zu einer höheren Extraktionsausbeute.rnDes Weiteren wurde MikroSISAK vom Institut für Mikrotechnik Mainz, welches derrnEntwickler und Konstrukteur der Apparatur ist, durch eine Erweiterung modifiziert, um den Kontakt der beiden Phasen zwischen Mischer und Separationseinheit zu verlängern. Auch dies verbesserte der Extraktionsausbeute.rnNun erschienen die erzielten Ergebnisse als ausreichend, um die Apparatur für online-Experimente an den TRIGA-Reaktor Mainz zu koppeln. Hierfür wurden durch Kernreaktion erzeugte Spaltprodukte des Technetiums MikroSISAK zugeführt, um sie dort abzutrennen und anschließend über ihren Zerfall an einem Detektor nachzuweisen. Neben erfolgreichen Ergebnissen lieferten diese Experimente auch die Belege für die Funktionsfähigkeit eines neuen Entgasers und für die Möglichkeit sowohl diesen als auch ein adäquates Detektorsystem an die MikroSISAK-Apparatur anzuschließen.rnDies schafft die Voraussetzung für die eigentliche Anwendungsidee, die hinter der Entwicklung von MikroSISAK steckt: Die Untersuchung der chemischen Eigenschaften von kurzlebigen superschweren Elementen (SHE) an einem Schwerionenbeschleuniger. Es liegt nahe, solche Experimente für das schwere Homologe des Technetiums, Element 107, Bohrium, ins Auge zu fassen.