The radiated energy budget of Chromospheric Plasma in a major solar flare deduced from multi-wavelength observations

This paper presents measurements of the energy radiated by the lower solar atmosphere, at optical, UV, and EUV wavelengths, during an X-class solar flare (SOL2011-02-15T01:56) in response to an injection of energy assumed to be in the form of nonthermal electrons. Hard X-ray observations from RHESSI were used to track the evolution of the parameters of the nonthermal electron distribution to reveal the total power contained in flare accelerated electrons. By integrating over the duration of the impulsive phase, the total energy contained in the nonthermal electrons was found to be >2 × 1031 erg. The response of the lower solar atmosphere was measured in the free–bound EUV continua of H i (Lyman), He i, and He ii, plus the emission lines of He ii at 304 Å and H i (Lyα) at 1216 Å by SDO/EVE, the UV continua at 1600 Å and 1700 Å by SDO/AIA, and the white light continuum at 4504 Å, 5550 Å, and 6684 Å, along with the Ca ii H line at 3968 Å using Hinode/SOT. The summed energy detected by these instruments amounted to ~3 × 1030 erg; about 15% of the total nonthermal energy. The Lyα line was found to dominate the measured radiative losses. Parameters of both the driving electron distribution and the resulting chromospheric response are presented in detail to encourage the numerical modeling of flare heating for this event, to determine the depth of the solar atmosphere at which these line and continuum processes originate, and the mechanism(s) responsible for their generation.

Equality, justice and feasibility: an ethical analysis of the WBGU’s budget approach

According to the Budget Approach proposed by the German Advisory Council on Global Change (WBGU), allocating CO2 emission rights to countries on an equal per-capita basis would provide an ethically justified response to global climate change. In this paper, we will highlight four normative issues which beset the WBGU’s Budget Approach: (1) the approach’s core principle of distributive justice, the principle of equality, and its associated policy of emissions egalitarianism are much more complex than it initially appears; (2) the “official” rationale for determining the size of the budget should be modified in order to avoid implausible normative assumptions about the imposition of permissible intergenerational risks; (3) the approach heavily relies on trade-offs between justice and feasibility which should be stated more explicitly; and (4) part of the approach’s ethical appeal depends on policy instruments which are “detachable” from the approach’s core principle of distributive justice.

Balancing the (carbon) budget: Using linear inverse models to estimate carbon flows and mass-balance 13C:15N labelling experiments in low oxygen sediments.

Over 1 million km² of seafloor experience permanent low-oxygen conditions within oxygen minimum zones (OMZs). OMZs are predicted to grow as a consequence of climate change, potentially affecting oceanic biogeochemical cycles. The Arabian Sea OMZ impinges upon the western Indian continental margin at bathyal depths (150 - 1500 m) producing a strong depth dependent oxygen gradient at the sea floor. The influence of the OMZ upon the short term processing of organic matter by sediment ecosystems was investigated using in situ stable isotope pulse chase experiments. These deployed doses of ¹³C:¹⁵N labeled organic matter onto the sediment surface at four stations from across the OMZ (water depth 540 - 1100 m; [O₂] = 0.35 - 15 μM). In order to prevent experimentally anoxia, the mesocosms were not sealed. ¹³C and ¹⁵N labels were traced into sediment, bacteria, fauna and ¹³C into sediment porewater DIC and DOC. However, the DIC and DOC flux to the water column could not be measured, limiting our capacity to obtain mass-balance for C in each experimental mesocosm. Linear Inverse Modeling (LIM) provides a method to obtain a mass-balanced model of carbon flow that integrates stable-isotope tracer data with community biomass and biogeochemical flux data from a range of sources. Here we present an adaptation of the LIM methodology used to investigate how ecosystem structure influenced carbon flow across the Indian margin OMZ. We demonstrate how oxygen conditions affect food-web complexity, affecting the linkages between the bacteria, foraminifera and metazoan fauna, and their contributions to benthic respiration. The food-web models demonstrate how changes in ecosystem complexity are associated with oxygen availability across the OMZ and allow us to obtain a complete carbon budget for the stationa where stable-isotope labelling experiments were conducted.

Towards a budget approach to Pleistocene terraces: preliminary studies using the River Exe in South West England, UK

This paper presents a first approach to using a sediment budget methodology for paired terrace staircase sediments in SW England. Although a budget approach has become firmly established in Holocene fluvial studies, it has not been used in Pleistocene sequences due to the problems of temporal resolution, catchment changes and downstream loss from the system. However, this paper uses a budget approach in a paired non-glaciated basin, primarily as a method of interrogating the terrace record concerning the degree of reworking and new sediment input required to produce the reconstructed terrace sequences. In order to apply a budget approach a number of assumptions have to be made and these are justified in the paper. The results suggest that the Exe system can most parsimoniously be explained principally by the reworking of a Middle Pleistocene floodplain system with relatively little input of new resistant clasts required and a cascade-type model in geomorphological terms. Whilst this maybe partially a result of the specific geology of the catchment, it is likely to be representative of many Pleistocene terrace systems in NW Europe due to their litho-tectonic similarities. This cascade-type model of terrace formation has archaeological implications and sets the context for the Palaeolithic terrace record in the UK. Future work will involve the testing of this and similar budget models using a combination of landscape modelling and chronometric dating. ?? 2009 The Geologists' Association.

Behaviour-time budget and functional habitat use of a free-ranging European badger (Meles meles)

Background: The European badger (Melesmeles) is involved in the maintenance of bovine tuberculosis infection and onward spread to cattle. However, little is known about how transmission occurs. One possible route could be through direct contact between infected badgers and cattle. It is also possible that indirect contact between cattle and infected badger excretory products such as faeces or urine may occur either on pasture or within and around farm buildings. A better understanding of behaviour patterns in wild badgers may help to develop biosecurity measures to minimise direct and indirect contact between badgers and cattle. However, monitoring the behaviour of free-ranging badgers can be logistically challenging and labour intensive due to their nocturnal and semi-fossorial nature.We trialled a GPS and tri-axial accelerometer-equipped collar on a free-ranging badger to assess its potential value to elucidate behaviour-time budgets and functional habitat use. Results: During the recording period between 16:00 and 08:00 on a single night, resting was the most commonly identified behaviour (67.4%) followed by walking (20.9%), snuffling (9.5%) and trotting (2.3%).When examining accelerometer data associated with each GPS fix and habitat type (occurring 2 min 30 s before and after), walking was themost common behaviour in woodland (40.3%) and arable habitats (53.8%), while snuffling was themost common behaviour in pasture (61.9%). Several nocturnal resting periods were also observed. The total distance travelled was 2.28 km. Conclusions: In the present report, we demonstrate proof of principle in the application of a combined GPS and accelerometer device to collect detailed quantitative data on wild badger behaviour. Behaviour-time budgets allow us to investigate how badgers allocate energy to different activities and how thismight change with disease status. Such information could be useful in the development of measures to reduce opportunities for onward transmission of bovine tuberculosis from badgers to cattle.

Budget 2016: experts respond

Fairness

The LOICZ biogeochemical budget approach applied to Ria Formosa lagoon, - Algarve, South Portugal

Dissertação mest., Gestão da Água e da Costa, Universidade do Algarve, 2007

Executive budget, state of South Carolina Fiscal Year 2016-17

Each year the Office of the Governor presents an Executive Budget to the General Assembly, consisting of a "complete and itemized plan of all proposed expenditures for each state department, bureau, division, officer, board, commission, institution, or other agency or undertaking."

Analysing energy use in supply chains: the case of fruits & vegetables and furniture

An increasing number of producers, retailers and third-party logistics providers are interested in carrying out energy assessments of their product supply chain. This is due to sensitivity about climate change and carbon emissions, but also to high energy prices. This paper presents an analytical approach developed to measure energy use in logistics activities in product supply chains. The approach (based on the Life Cycle Approach) quantifies energy use in transport and logistics activities at all stages of a product supply chain. The work has demonstrated that such an assessment approach based on the supply chain is useful in comparing the energy use implications of different strategies. This supply chain approach can be used to consider options such as sourcing and distribution centre locations, transport modes, road freight vehicle types and weights, vehicle load factors, empty running, transport distance and the balance between consumer shopping trips and delivery to the home.

Analysis of the mismatch between school furniture and children

The characteristics of school furniture are strongly associated with back and neck pain, referred by school-aged children. In Portugal, about 60% of the adolescents involved in a recent study reported having felt back pain at least once in the last three months. The aim of this study was to compare furniture sizes of the 2 types indicated for primary schools, within 9 schools, with the anthropometric characteristics of Portuguese students, in order to evaluate the mismatch between them. The sample consisted of 432 volunteer students. Regarding the methodology, 5 anthropometric measures were gathered, as well as 5 dimensions from the school furniture. For the evaluation of classroom furniture, a (mis)match criterion equation was defined. Results indicated that there is a significant mismatch between furniture dimensions and the anthropometric characteristics of the students.

Risk Acceptance in the Furniture Sector: Analysis of Acceptance Level and Relevant Influence Factors

Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in regard to occupational accidents in furniture industries. The safety climate analysis was conducted through the application of the Safety Climate in Wood Industries questionnaire. Judgments about risk acceptance, trust, risk perception, benefit perception, emotions, and moral values were measured. Several models were tested to explain occupational risk acceptance. The results showed that the level of risk acceptance decreased as the risk level increased. High-risk and death scenarios were assessed as unacceptable. Risk perception, emotions, and trust had an important influence on risk acceptance. Safety climate was correlated with risk acceptance and other variables that influence risk acceptance. These results are important for the risk assessment process in terms of defining risk acceptance criteria and strategies to reduce risks.

Safety climate and its relationship with furniture companies’ safety performance and workers’ risk acceptance

This study aims to analyse the relationship between safety climate and the level of risk acceptance, as well as its relationship with workplace safety performance. The sample includes 14 companies and 403 workers. The safety climate assessment was performed by the application of a Safety Climate in Wood Industries questionnaire and safety performance was assessed with a checklist. Judgements about risk acceptance were measured through questionnaires together with four other variables: trust, risk perception, benefit perception and emotion. Safety climate was found to be correlated with workgroup safety performance, and it also plays an important role in workers’ risk acceptance levels. Risk acceptance tends to be lower when safety climate scores of workgroups are high, and subsequently, their safety performance is better. These findings seem to be relevant, as they provide Occupational, Safety and Health practitioners with a better understanding of workers’ risk acceptance levels and of the differences among workgroups.

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Hankinnan kokonaiskustannukset hankintapäätösten tukena. Case: Incap Furniture Oy

Tämän pro gradu -tutkielman tavoitteena oli tehdä hankinnan kokonaiskustannusmalli tietylle case-yrityksen tuotteelle. Tarkoituksena oli selvittää, mikä on hankinnan kokonaiskustannusten merkitys strategisen kustannusten hallinnan osana ja mitä mahdollisia työkaluja voidaan käyttää hankinnan kokonaiskustannusten mittaamiseen. Lisäksi tutkimuksessa selvitettiin kuinka hankinnan kokonaiskustannuspäätökset voivat auttaa hankintapäätösten teossa. Tutkimus on kvalitatiivinen ja muodostuu teoreettisesta ja empiirisestä osasta.Teoriaosa on luonteeltaan käsiteanalyyttinen ja empiriaosa vertaileva case-tutkimus. Teoreettisessa osassa selvitetään hankinnan kokonaiskustannusten teoriaa ja empiriaosassa tutkimus kohdennetaan case-yrityksen Forsby-jalkaan. Tutkimuksentuloksena syntyi case-yritykselle hankinnan kokonaiskustannusten malli, jota yritys käyttää ensisijaisesti toimittajien arviointiin. Hankinnan kokonaiskustannukset osoittautuivat tärkeäksi osaksi yrityksen strategista kustannusten hallintaa. Tutkimuksessa ilmeni, että kohdeyrityksen erityispiirteiden ja käytössä olevien resurssien huomioiminen on erittäin merkittävä asia hankinnan kokonaiskustannusmallia muodostettaessa. Lisäksi tutkimuksen teon aikana nousi esiin useita asioita, joita case-yrityksen on jatkossa kehitettävä.