Natural antimicrobial ingredients incorporated in biodegradable films based on cassava starch

Biodegradable films based on cassava starch and with addition of natural antimicrobial ingredients were prepared using the casting technique. The tensile properties tensile strength (TS) [MPa] and percent elongation (E) at break [%] and the water vapor transmission (WVT) of the biodegradable films were evaluated and compared with the control (without antimicrobial ingredients). The evaluation of the Colony Forming Units per gram [CFU/g] of pan bread slices packed with the best biodegradable films, in terms of packaging performance, was also determined. The addition onto the matrix of only clove and cinnamon powders could reduce the films WVT when compared to the control, however TS and E were lower than the control and the effect of cinnamon was milder regarding this property. Since water activity of the pan bread slices packed with the biodegradable films increased considerably during the storage period, the antimicrobial effect could not be clearly determined. (C) 2010 Published by Elsevier Ltd.

Determination of the betaine content of feed ingredients using high-performance liquid chromatography

A series of studies was conducted to establish a methodology for the accurate and efficient determination of betaine in different feed ingredients. The final methodology involves an extraction step in which the feed sample is heated for 3h in a methanolic KOH solution using a Goldfisch apparatus. Impurities are removed by the addition of activated charcoal and concentrated (36%) HCl. After centrifugation the extractant is passed through a strong cation exchange resin (Dowex 50W-X12, H+). The betaine retained in the column is eluted with 1.5 N HCl. A 2 nil aliquot of the elute is air dried and reconstituted with 1 ml of deionised water. HPLC separation with a cation exchange column (Partisil SCX-10) is used for the separation of betaine from other compounds. The mobile phase is kept constant at 50mm KH2PO4 in water, and eluted compounds are detected by UV absorbance (200nm). The flow rate is maintained at 1.5ml min(-1). This assay is very accurate over the range of betaine concentrations from 15 to 650 mug ml(-1), with a lower detection limit in feeds of approximately 500 mug g(-1) when 4g of sample is extracted. Recovery assays done with standard betaine hydrochloride and hard red wheat resulted in a consistent recovery of 80%. Betaine content was quantified in several feed ingredients, including alfalfa (1.77 mg kg(-1)), wheat (3.96 mg kg(-1)), wheat middlings (4.98 mg kg(-1)) and poultry meal (0.77 mg kg(-1)). Betaine in corn and soybean meal was not detectable by this method, even when 16g of sample was used (<125 mg kg(-1)). Betaine present in several feed ingredients should influence choline supplementation to animal feeds and may have implications for human health. (C) 2002 Society of Chemical Industry.

Physico-chemical and microstructural properties of food dispersions

The macroscopic properties of oily food dispersions, such as rheology, mechanical strength, sensory attributes (e.g. mouth feel, texture and even flavour release) and as well as engineering properties are strongly determined by their microstructure, that is considered a key parameter in the understanding of the foods behaviour . In particular the rheological properties of these matrices are largely influenced by their processing techniques, particle size distribution and composition of ingredients. During chocolate manufacturing, mixtures of sugar, cocoa and fat are heated, cooled, pressurized and refined. These steps not only affect particle size reduction, but also break agglomerates and distribute lipid and lecithin-coated particles through the continuous phase, this considerably modify the microstructure of final chocolate. The interactions between the suspended particles and the continuous phase provide information about the existing network and consequently can be associated to the properties and characteristics of the final dispersions. Moreover since the macroscopic properties of food materials, are strongly determined by their microstructure, the evaluation and study of the microstructural characteristics, can be very important for a through understanding of the food matrices characteristics and to get detailed information on their complexity. The aim of this study was investigate the influence of formulation and each process step on the microstructural properties of: chocolate type model systems, dark milk and white chocolate types, and cocoa creams. At the same time the relationships between microstructural changes and the resulting physico-chemical properties of: chocolate type dispersions model systems dark milk and white chocolate were investigated.

Crisis management and risk communication: Why the food industry must get it right

There is public unease about food-related issues including food additives, food poisoning bacteria and GM ingredients. The public wants evidence of no risks, but all regulators can ever offer is no evidence of risk or evidence of a very small risk. The situation is complex because experts and non-experts can perceive the same risk in vastly different ways. The way in which the food industry manages crises and communicates risks will determine the public acceptance and success of new technologies such as GM foods and nanomaterials. There is a need for the food industry (including regulators and scientific experts) to sharpen up their risk communication skills to ensure that technical innovations are accepted by consumers, and crises such as food recalls do not undermine the public's confidence in the food industry. The AIFST has a key role to play in driving the risk communication process and allaying public unease about food-related issues.

Nanotechnology in the food industry I: applications

Nanotechnology is a multidisciplinary science that is having a boom today, providing new products with attractive physicochemical properties for many applications. In agri/feed/food sector, nanotechnology offers great opportunities for obtaining products and innovative applications for agriculture and livestock, water treatment and the production, processing, storage and packaging of food. To this end, a wide variety of nanomaterials, ranging from metals and inorganic metal oxides to organic nanomaterials carrying bioactive ingredients are applied. This review shows an overview of current and future applications of nanotechnology in the food industry. Food additives and materials in contact with food are now the main applications, while it is expected that in the future are in the field of nano-encapsulated and nanocomposites in applications as novel foods, additives, biocides, pesticides and materials food contact.

Barriers and facilitators to cooking from 'scratch' using basic or raw ingredients: A qualitative interview study

Background: Previous research has highlighted an ambiguity in understanding cooking related terminology and a number of barriers and facilitators to home meal preparation. However, meals prepared in the home still include convenience products (typically high in sugars, fats and sodium) which can have negative effects on health. Therefore, this study aimed to qualitatively explore: (1) how individuals define cooking from ‘scratch’, and (2) their barriers and facilitators to cooking with basic ingredients.
Methods: 27 semi-structured interviews were conducted with participants (aged 18-58 years) living on the island of Ireland, eliciting definitions of ‘cooking from scratch’ and exploring the reasons participants cook in a particular way. The interviews were professionally transcribed verbatim and Nvivo 10 was used for an inductive thematic analysis.
Results: Our results highlighted that although cooking from ‘scratch’ lacks a single definition, participants viewed it as optimal cooking. Barriers to cooking with raw ingredients included: 1) time pressures; (2) desire to save money; (3) desire for effortless meals; (4) family food preferences; and (5) effect of kitchen disasters. Facilitators included: 1) desire to eat for health and well-being; (2) creative inspiration; (3) ability to plan and prepare meals ahead of time; and (4) greater self-efficacy in one’s cooking ability.
Conclusions: Our findings contribute to understanding how individuals define cooking from ‘scratch’, and barriers and facilitators to cooking with raw ingredients. Interventions should focus on practical sessions to increase cooking self-efficacy; highlight the importance of planning ahead and teach methods such as batch cooking and freezing to facilitate cooking from scratch.

Fast and sensitive aflatoxin B1 and total aflatoxins ELISAs for analysis of peanuts, maize and feed ingredients

Aflatoxins are a group of carcinogenic compounds produced by Aspergillus fungi that can grow on different agricultural crops. Both acute and chronic exposure to these mycotoxins can cause serious illness. Due to the high occurrence of aflatoxins in crops worldwide fast and cost-effective analytical methods are required for the identification of contaminated agricultural commodities before they are processed into final products and placed on the market. In order to provide new tools for aflatoxin screening two prototype fast ELISA methods: one for the detection of aflatoxin B₁ and the other for total aflatoxins were developed. Seven monoclonal antibodies with unique high sensitivity and at the same time good cross-reactivity profiles were produced. The monoclonal antibodies were characterized and two antibodies showing IC₅₀ of 0.037 ng/mL and 0.031 ng/mL for aflatoxin B₁ were applied in simple and fast direct competitive ELISA tests. The methods were validated for peanut matrix as this crop is one of the most affected by aflatoxin contamination. The detection capabilities of aflatoxin B₁ and total aflatoxins ELISAs were 0.4 μg/kg and 0.3 μg/kg for aflatoxin B₁, respectively, which are one of the lowest reported values. Total aflatoxins ELISA was also validated for the detection of aflatoxins B₂, G₁ and G₂. The application of the developed tests was demonstrated by screening 32 peanut samples collected from the UK retailers. Total aflatoxins ELISA was further applied to analyse naturally contaminated maize porridge and distiller's dried grain with solubles samples and the results were correlated with these obtained by UHPLC-MS/MS method.

Physicochemical characterisation of protein ingredients prepared from milk by ultrafiltration or microfiltration for application in formulated nutritional products

Formulated food systems are becoming more sophisticated as demand grows for the design of structural and nutritional profiles targeted at increasingly specific demographics. Milk protein is an important bio- and techno-functional component of such formulations, which include infant formula, sports supplements, clinical beverages and elderly nutrition products. This thesis outlines research into ingredients that are key to the development of these products, namely milk protein concentrate (MPC), milk protein isolate (MPI), micellar casein concentrate (MCC), β-casein concentrate (BCC) and serum protein concentrate (SPC). MPC powders ranging from 37 to 90% protein (solids basis) were studied for properties of relevance to handling and storage of powders, powder solubilisation and thermal processing of reconstituted MPCs. MPC powders with ≥80% protein were found to have very poor flowability and high compressibility; in addition, these high-protein MPCs exhibited poor wetting and dispersion characteristics during rehydration in water. Heat stability studies on unconcentrated (3.5%, 140°C) and concentrated (8.5%, 120°C) MPC suspensions, showed that suspensions prepared from high-protein MPCs coagulated much more rapidly than lower protein MPCs. β-casein ingredients were developed using membrane processing. Enrichment of β-casein from skim milk was performed at laboratory-scale using ‘cold’ microfiltration (MF) at <4°C with either 1000 kDa molecular weight cut-off or 0.1 µm pore-size membranes. At pilot-scale, a second ‘warm’ MF step at 26°C was incorporated for selective purification of micellised β-casein from whey proteins; using this approach, BCCs with β-casein purity of up to 80% (protein basis) were prepared, with the whey protein purity of the SPC co-product reaching ~90%. The BCC ingredient could prevent supersaturated solutions of calcium phosphate (CaP) from precipitating, although the amorphous CaP formed created large micelles that were less thermo-reversible than those in CaP-free systems. Another co-product of BCC manufacture, MCC powder, was shown to have superior rehydration characteristics compared to traditional MCCs. The findings presented in this thesis constitute a significant advance in the research of milk protein ingredients, in terms of optimising their preparation by membrane filtration, preventing their destabilisation during processing and facilitating their effective incorporation into nutritional formulations designed for consumers of a specific age, lifestyle or health status

Retail Food Establishments: Guide to HACCP Plans

A Hazard Analysis and Critical Control Point (HACCP) system is a plan to reduce the risk of safety hazards in food. The HACCP System identifies potential biological, chemical and physical hazards from the time the food enters the facility to when it is served. The Hazard Analysis identifies critical control points based on the ingredients, raw materials and processes. Control measures are then identified, implemented and monitored to ensure the ongoing safety of the finished products.

Chestnut and lemon balm based ingredients as natural preserving agents of the nutritional profile in matured “Serra da Estrela” cheese

Chestnut flowers, lemon balm plants and their decoctions were incorporated into "Serra da Estrela" cheese, to assess their potential to preserve its nutritional properties and provide new foodstuffs. The analyses were carried out after the normal ripening period of 1month and after 6months of storage. The most abundant nutrients were proteins and fats. The most abundant minerals were Ca and Na, while C16:0 and C18:1 were the main fatty acids. Saturated fatty acids were the most abundant, followed by the monounsaturated. Moisture seemed to be lower in the samples with the plants incorporated. The dried plants, when incorporated, seemed to be more efficient as preservers then the decoctions, although these better preserved the proteins. These plants can be regarded as promising natural preservers in foodstuffs cheese, given the preservation of key parameters and the slight impact on the nutritional value.

Non-fermented and fermented jabuticaba (Myrciaria cauliflora Mart.) pomaces as valuable sources of functional ingredients

abuticaba (Myrciaria cauliflora. Mart) is a highly perishable fruit native to Brazil, which is consumed both fresh and industrially processed in the form of juices, jams, wines and distilled liqueurs. This processing generates a large amount of waste by-products, which represent approximately 50% of the fruit weight. The by-products are of interest for obtaining valuable bioactive compounds that could be used as nutraceuticals or functional ingredients. In this study, fermented and non-fermented jabuticaba pomaces were studied regarding their hydrophilic and lipophilic compounds, as well as their antioxidant properties, including: soluble sugars, organic acids and tocopherols (using high performance liquid chromatography coupled to refraction index, diode array and fluorescence detector, respectively); phenolics and anthocyanins, (using liquid chromatography coupled to diode array detection, and mass spectrometry with electrospray ionization); and fatty acids (using gas-liquid chromatography with flame ionization detection). The analytical data demonstrated that jabuticaba pomaces are a rich source of bioactive compounds such as tocopherols, polyunsaturated fatty acids and phenolic compounds (namely hydrolyzable tannins and anthocyanins) with antioxidant potential. Therefore, jabuticaba pomace may have good potential as a functional ingredient in the fabrication of human foods and animal feed.

Macroalgae and commercial macroalgal polysaccharides as potential functional ingredients in muscle foods

Ulva rigida (UR) and Palmaria palmata (PP) were included in farmed Atlantic salmon diets at levels of 0-15% for 19 and 16 weeks, respectively. Quality and shelf-life parameters of salmon fillets stored in modified atmosphere packs (MAP) (60% N2 : 40% CO2) at 4ºC were compared to controls fed astaxanthin. Salmon fillets were enhanced with a yellow/orange colour. Proximate composition, pH and lipid oxidation were unaffected by dietary UR and PP. Salmon fed 5% UR and 5-15% PP did not influence sensory descriptors (texture, odour, oxidation flavour and overall acceptability) of cooked salmon fillets. Pig diets were supplemented with commercial wet- and spray-dried macroalgal (Laminaria digitata) polysaccharide extracts containing laminarin (L, 500 mg/kg feed) and fucoidan (F, 420 mg/kg feed) (L/F-WS, L/F-SD) for 3 weeks and quality and shelf-life parameters of fresh pork steaks (longissimus thoracis et lumborum) stored in MAP (80% O2 : 20% CO2) were examined. Level (450 or 900 mg L and F/kg feed) and duration (3 or 6 weeks) of dietary L/F-WS and mechanisms of antioxidant activities in pork were investigated. L/F-WS reduced (p < 0.05) lipid oxidation and lowered levels of saturated fatty acids in fresh pork after 3 weeks feeding. L/F-SD was added directly to mince pork (0.01 - 0.5%) and quality and shelf-life parameters of fresh pork patties stored in MAP (80% O2 : 20% CO2) were assessed. Direct addition of the L/F-SD increased levels of lipid oxidation and decreased surface redness (a* values) of fresh pork patties. Lipid oxidation was reduced in cooked patties due to the formation of Maillard reaction products. Cooked pork patties containing L/F-SD were subjected to an in vitro digestion and a cellular transwell model to confirm bioaccessibility and uptake of antioxidant compounds. In mechanistic studies, fucoidan demonstrated antiand pro-oxidant activities on muscle lipids and oxymyoglobin, respectively.

Emerging plant-based proteins: comparison from extraction to functional properties and food application

The increasing demand for alternatives to meat food products, which is linked to ethical and environmental reasons, highlights the necessity of using different protein sources. Plant proteins provide a valid option, thanks to the relative low costs, high availability and wide supply sources. The current process used to produce plant concentrates and isolates is the alkaline extraction followed by isoelectric precipitation. However, despite the high purity of the proteins, it presents some drawbacks. Innovative protein extraction processes are emerging, with the aim of reducing the environmental impact and the costs, as well as improving the functional properties. In this study, the traditional wet protein extraction and another simplified wet process were used to obtain protein-rich extracts out of different plants. The sources considered in the project were de-oiled sunflower and canola, chickpea, lentils, and the camelina meal, an emerging oleaginous seed interesting for its high content of omega 3. The extracts obtained from the two processes were then analysed for their capacities to hold water and fat, to form gel and a stable foam. Results highlighted strong differences concerning the protein content, yield and functionalities. The extracts obtained with the alkaline process confirmed the literature data about the four plant sources (sunflower, canola, chickpea and lentils) and allow to obtain a camelina concentrate with a protein content of 63 % and a protein recovery of 41 %. The second easiest process was not effective to obtain a protein enrichment in oleaginous sources, whereas an enrichment of 10 and 15 % was obtained in chickpea and lentils, respectively. The functional properties were also completely different: the easiest process produced protein ingredients completely water-soluble at pH 7, with a discrete foaming capacity compared to the extracts obtained with alkaline process. These characteristics could make these extracts suitable for the plant milk-analogue products.

Evaluation of the real nutritional value of processed food to improve their effect on health and increase their sustainability

Cured meats and dairy products are criticized for their salt content and synthetic additives. This has led to the development of strategies to reduce and replace these ingredients. Since the food matrix and technological processes can affect the bioaccessibility of nutrients, it is necessary to study their release during digestion to determine the real nutritional value of foods. In the first part of this PhD project, the impact on the nutritional quality of the reduction of sodium content and of the replacement of synthetic nitrates/nitrites with a combination of innovative formulations was evaluated in Parmigiano Reggiano Cheese and salami. For this purpose, an in vitro digestion model combined with different analytical techniques was used. The results showed that fatty acids and proteins release increased over time during digestion. At the end of digestion, the innovative formulation/processing did not negatively affect fatty acids release and protein hydrolysis, and led to the formation of bioactive peptides. The excessive intake of sugars is correlated with metabolic diseases. After the intestinal uptake, their release in the blood stream depends on their metabolic fate within the enterocyte. In the second part of this PhD project, the absorption and metabolism of glucose, fructose and sucrose was evaluated using intestinal cell line. A faster absorption of fructose than glucose was observed, and a different modulation of the synthesis/transport of other metabolites by monosaccharides was shown. Intestinal cells were also used to verify the stability and intestinal uptake of vitamins (A and D3) delivered to cells through two vehicles. It was shown that the presence of lipids protected the vitamin from external factors such as light, heat and oxygen, and improved their bioavailability Overall, the results obtained in this PhD project confirmed that considering only the chemical composition of foods is not sufficient to determine their nutritional value.

Biotechnological approaches to valorize alternative protein source, waste and by-products from food industries

The PhD research project was a striking example of the enhancement of milling by-product and alternative protein sources from house cricket (Acheta domesticus), conceived as sustainable and renewable sources, to produce innovative food products. During milling processing of wheat and rye, several by-products with high technological and functional potential, are produced. The use of selected microbial consortia, allowed to obtain a pre-fermented ingredient for use in the bakery. The pre-ferments obtained were characterized by a high technological, functional and nutritional value, also interesting from a nutraceutical point of view. Bakery products obtained by the addition of pre-fermented ingredients were characterized by a greater quantity of aromatic molecules and an increase in SCFA, antioxidant activity, total amino acids and total phenols resulting in positive effect on the functionality. Moreover, the industrial scaling-up of pre-ferment and innovative bakery goods production, developed in this research, underlined the technological applicability of pre-fermented ingredients on a large scale. Moreover, the identification of innovative protein sources, can address the request of new sustainable ingredients able to less impact on the environment and to satisfy the food global demand. To upscale the insect production and ensure food safety of insect-based products, biotechnological formulations based on Acheta domesticus powder were optimized. The use of Yarrowia lipolytica in the biotechnological transformation of cricket powder led to the achievement of a cricket-based food ingredient characterized by a reduced content of chitin and an increase of antimicrobial and health-promoting molecules. The innovative bakery products containing cricket-based hydrolysates from Y. lipolytica possessed specific sensory, qualitative and functional characteristics to the final product. Moreover, the combination of Y. lipolytica hydrolysis and baking showed promising results regarding a reduced allergenicity in cricket-based baked products. Thus, the hydrolysate of cricket powder may represent a versatile and promising ingredient in the production of innovative foods.