Simulação Monte Carlo no ensino de luminescência e cinética de decaimento de estados excitados

A software based in the Monte Carlo method have been developed aiming the teaching of important cases of mechanisms found in luminescence and in excited states decay kinetics, including: multiple decays, consecutive decays and coupled systems decays. The Monte Carlo Method allows the student to easily simulate and visualize the luminescence mechanisms, focusing on the probabilities of the related steps. The software CINESTEX was written for FreeBASIC compiler; it assumes first-order kinetics and any number of excited states, where the pathways are allowed with probabilities assigned by the user.

Simulação Monte Carlo de mecanismo de transferência de energia de excitação eletrônica: modelo de Perrin para a supressão estática da luminescência

A software based in the Monte Carlo method has been developed aiming the teaching of the Perrin´s model for static luminescence quenching. This software allows the student to easily simulate the luminescence decays of emissive molecules in the presence of quenching ones. The software named PERRIN was written for FreeBASIC compiler and it can be applied for systems where the molecules remain static during its excited state lifetime. The good agreement found between the simulations and the expected theoretical results shows that it can be used for the luminescence and excited states decay kinetic teaching.

Software para simulação de mecanismo de supressão da luminescência: modelo cinético de Stern-Volmer

A software that includes both Stochastic and Molecular Dynamics procedures has been developed with the aim of visualizing the Stern-Volmer kinetic mechanism of dynamic luminescence quenching. The software allows the student to easily simulate and graphically visualize the molecular collisions, the molecular speed distributions, the luminescence decay curves, and the Stern-Volmer graphs. The software named "SternVolmer" is written for the FreeBASIC compiler and can be applied to dynamic systems where luminescent molecules, during their excited state lifetimes, are able to collide with quenching molecules (collisional quenching). The good agreement found between the simulations and the expected results shows that this software can be used as an effective teaching aid for the study of luminescence and kinetic decay of excited states.

Reusing repository technology for Cultural Heritage and Special Collections

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

APIs and Datasets everywhere

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Scheduling dynamic dataflow graphs with model checking

With the shift towards many-core computer architectures, dataflow programming has been proposed as one potential solution for producing software that scales to a varying number of processor cores. Programming for parallel architectures is considered difficult as the current popular programming languages are inherently sequential and introducing parallelism is typically up to the programmer. Dataflow, however, is inherently parallel, describing an application as a directed graph, where nodes represent calculations and edges represent a data dependency in form of a queue. These queues are the only allowed communication between the nodes, making the dependencies between the nodes explicit and thereby also the parallelism. Once a node have the su cient inputs available, the node can, independently of any other node, perform calculations, consume inputs, and produce outputs. Data ow models have existed for several decades and have become popular for describing signal processing applications as the graph representation is a very natural representation within this eld. Digital lters are typically described with boxes and arrows also in textbooks. Data ow is also becoming more interesting in other domains, and in principle, any application working on an information stream ts the dataflow paradigm. Such applications are, among others, network protocols, cryptography, and multimedia applications. As an example, the MPEG group standardized a dataflow language called RVC-CAL to be use within reconfigurable video coding. Describing a video coder as a data ow network instead of with conventional programming languages, makes the coder more readable as it describes how the video dataflows through the different coding tools. While dataflow provides an intuitive representation for many applications, it also introduces some new problems that need to be solved in order for data ow to be more widely used. The explicit parallelism of a dataflow program is descriptive and enables an improved utilization of available processing units, however, the independent nodes also implies that some kind of scheduling is required. The need for efficient scheduling becomes even more evident when the number of nodes is larger than the number of processing units and several nodes are running concurrently on one processor core. There exist several data ow models of computation, with different trade-offs between expressiveness and analyzability. These vary from rather restricted but statically schedulable, with minimal scheduling overhead, to dynamic where each ring requires a ring rule to evaluated. The model used in this work, namely RVC-CAL, is a very expressive language, and in the general case it requires dynamic scheduling, however, the strong encapsulation of dataflow nodes enables analysis and the scheduling overhead can be reduced by using quasi-static, or piecewise static, scheduling techniques. The scheduling problem is concerned with nding the few scheduling decisions that must be run-time, while most decisions are pre-calculated. The result is then an, as small as possible, set of static schedules that are dynamically scheduled. To identify these dynamic decisions and to find the concrete schedules, this thesis shows how quasi-static scheduling can be represented as a model checking problem. This involves identifying the relevant information to generate a minimal but complete model to be used for model checking. The model must describe everything that may affect scheduling of the application while omitting everything else in order to avoid state space explosion. This kind of simplification is necessary to make the state space analysis feasible. For the model checker to nd the actual schedules, a set of scheduling strategies are de ned which are able to produce quasi-static schedulers for a wide range of applications. The results of this work show that actor composition with quasi-static scheduling can be used to transform data ow programs to t many different computer architecture with different type and number of cores. This in turn, enables dataflow to provide a more platform independent representation as one application can be fitted to a specific processor architecture without changing the actual program representation. Instead, the program representation is in the context of design space exploration optimized by the development tools to fit the target platform. This work focuses on representing the dataflow scheduling problem as a model checking problem and is implemented as part of a compiler infrastructure. The thesis also presents experimental results as evidence of the usefulness of the approach.

Français 3716

Contient : 1° Cahiers de la noblesse aux États généraux de 1614. Même contenu qu'en l'article 2 du n° 3715 ; 2° « Extraict du cahier general du tiers estat » ; 3° « Extraict pris tous les jours de ce qui se deliberoit en la chambre pour rediger et compiler le cayer general de la noblesse »

Incorporating complex cells into neural networks for pattern classification

Dans le domaine des neurosciences computationnelles, l'hypothèse a été émise que le système visuel, depuis la rétine et jusqu'au cortex visuel primaire au moins, ajuste continuellement un modèle probabiliste avec des variables latentes, à son flux de perceptions. Ni le modèle exact, ni la méthode exacte utilisée pour l'ajustement ne sont connus, mais les algorithmes existants qui permettent l'ajustement de tels modèles ont besoin de faire une estimation conditionnelle des variables latentes. Cela nous peut nous aider à comprendre pourquoi le système visuel pourrait ajuster un tel modèle; si le modèle est approprié, ces estimé conditionnels peuvent aussi former une excellente représentation, qui permettent d'analyser le contenu sémantique des images perçues. Le travail présenté ici utilise la performance en classification d'images (discrimination entre des types d'objets communs) comme base pour comparer des modèles du système visuel, et des algorithmes pour ajuster ces modèles (vus comme des densités de probabilité) à des images. Cette thèse (a) montre que des modèles basés sur les cellules complexes de l'aire visuelle V1 généralisent mieux à partir d'exemples d'entraînement étiquetés que les réseaux de neurones conventionnels, dont les unités cachées sont plus semblables aux cellules simples de V1; (b) présente une nouvelle interprétation des modèles du système visuels basés sur des cellules complexes, comme distributions de probabilités, ainsi que de nouveaux algorithmes pour les ajuster à des données; et (c) montre que ces modèles forment des représentations qui sont meilleures pour la classification d'images, après avoir été entraînés comme des modèles de probabilités. Deux innovations techniques additionnelles, qui ont rendu ce travail possible, sont également décrites : un algorithme de recherche aléatoire pour sélectionner des hyper-paramètres, et un compilateur pour des expressions mathématiques matricielles, qui peut optimiser ces expressions pour processeur central (CPU) et graphique (GPU).

Criteria for the validation of specialized verb equivalents : application in bilingual terminography

Multilingual terminological resources do not always include valid equivalents of legal terms for two main reasons. Firstly, legal systems can differ from one language community to another and even from one country to another because each has its own history and traditions. As a result, the non-isomorphism between legal and linguistic systems may render the identification of equivalents a particularly challenging task. Secondly, by focusing primarily on the definition of equivalence, a notion widely discussed in translation but not in terminology, the literature does not offer solid and systematic methodologies for assigning terminological equivalents. As a result, there is a lack of criteria to guide both terminologists and translators in the search and validation of equivalent terms. This problem is even more evident in the case of predicative units, such as verbs. Although some terminologists (L‘Homme 1998; Lerat 2002; Lorente 2007) have worked on specialized verbs, terminological equivalence between units that belong to this part of speech would benefit from a thorough study. By proposing a novel methodology to assign the equivalents of specialized verbs, this research aims at defining validation criteria for this kind of predicative units, so as to contribute to a better understanding of the phenomenon of terminological equivalence as well as to the development of multilingual terminography in general, and to the development of legal terminography, in particular. The study uses a Portuguese-English comparable corpus that consists of a single genre of texts, i.e. Supreme Court judgments, from which 100 Portuguese and 100 English specialized verbs were selected. The description of the verbs is based on the theory of Frame Semantics (Fillmore 1976, 1977, 1982, 1985; Fillmore and Atkins 1992), on the FrameNet methodology (Ruppenhofer et al. 2010), as well as on the methodology for compiling specialized lexical resources, such as DiCoInfo (L‘Homme 2008), developed in the Observatoire de linguistique Sens-Texte at the Université de Montréal. The research reviews contributions that have adopted the same theoretical and methodological framework to the compilation of lexical resources and proposes adaptations to the specific objectives of the project. In contrast to the top-down approach adopted by FrameNet lexicographers, the approach described here is bottom-up, i.e. verbs are first analyzed and then grouped into frames for each language separately. Specialized verbs are said to evoke a semantic frame, a sort of conceptual scenario in which a number of mandatory elements (core Frame Elements) play specific roles (e.g. ARGUER, JUDGE, LAW), but specialized verbs are often accompanied by other optional information (non-core Frame Elements), such as the criteria and reasons used by the judge to reach a decision (statutes, codes, previous decisions). The information concerning the semantic frame that each verb evokes was encoded in an xml editor and about twenty contexts illustrating the specific way each specialized verb evokes a given frame were semantically and syntactically annotated. The labels attributed to each semantic frame (e.g. [Compliance], [Verdict]) were used to group together certain synonyms, antonyms as well as equivalent terms. The research identified 165 pairs of candidate equivalents among the 200 Portuguese and English terms that were grouped together into 76 frames. 71% of the pairs of equivalents were considered full equivalents because not only do the verbs evoke the same conceptual scenario but their actantial structures, the linguistic realizations of the actants and their syntactic patterns were similar. 29% of the pairs of equivalents did not entirely meet these criteria and were considered partial equivalents. Reasons for partial equivalence are provided along with illustrative examples. Finally, the study describes the semasiological and onomasiological entry points that JuriDiCo, the bilingual lexical resource compiled during the project, offers to future users.

Étude de cas sur l’ajout de vecteurs d’enregistrements typés dans Gambit Scheme

Dans le but d’optimiser la représentation en mémoire des enregistrements Scheme dans le compilateur Gambit, nous avons introduit dans celui-ci un système d’annotations de type et des vecteurs contenant une représentation abrégée des enregistrements. Ces derniers omettent la référence vers le descripteur de type et l’entête habituellement présents sur chaque enregistrement et utilisent plutôt un arbre de typage couvrant toute la mémoire pour retrouver le vecteur contenant une référence. L’implémentation de ces nouvelles fonctionnalités se fait par le biais de changements au runtime de Gambit. Nous introduisons de nouvelles primitives au langage et modifions l’architecture existante pour gérer correctement les nouveaux types de données. On doit modifier le garbage collector pour prendre en compte des enregistrements contenants des valeurs hétérogènes à alignements irréguliers, et l’existence de références contenues dans d’autres objets. La gestion de l’arbre de typage doit aussi être faite automatiquement. Nous conduisons ensuite une série de tests de performance visant à déterminer si des gains sont possibles avec ces nouvelles primitives. On constate une amélioration majeure de performance au niveau de l’allocation et du comportement du gc pour les enregistrements typés de grande taille et des vecteurs d’enregistrements typés ou non. De légers surcoûts sont toutefois encourus lors des accès aux champs et, dans le cas des vecteurs d’enregistrements, au descripteur de type.

Abitbol : un langage sur mesure pour la métaprogrammation

Ce mémoire a pour thèse que les fonctions devraient être transparentes lors de la phase de métaprogrammation. En effet, la métaprogrammation se veut une possibilité pour le programmeur d’étendre le compilateur. Or, dans un style de programmation fonctionnelle, la logique du programme se retrouve dans les définitions des diverses fonctions le composant. Puisque les fonctions sont généralement opaques, l’impossibilité d’accéder à cette logique limite les applications possibles de la phase de métaprogrammation. Nous allons illustrer les avantages que procurent les fonctions transparentes pour la métaprogrammation. Nous donnerons notamment l’exemple du calcul symbolique et un exemple de nouvelles optimisations désormais possibles. Nous illustrerons également que la transparence des fonctions permet de faire le pont entre les datatypes du programme et les fonctions. Nous allons également étudier ce qu'implique la présence de fonctions transparentes au sein d'un langage. Nous nous concentrerons sur les aspects reliés à l'implantation de ces dernières, aux performances et à la facilité d'utilisation. Nous illustrerons nos propos avec le langage Abitbol, un langage créé sur mesure pour la métaprogrammation.

An Error-Localization, Validation and Optimization Tool for Embedded Code Augmentation: an Architecture Oriented Approach

Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.This dissertation contributes to an architecture oriented code validation, error localization and optimization technique assisting the embedded system designer in software debugging, to make it more effective at early detection of software bugs that are otherwise hard to detect, using the static analysis of machine codes. The focus of this work is to develop methods that automatically localize faults as well as optimize the code and thus improve the debugging process as well as quality of the code.Validation is done with the help of rules of inferences formulated for the target processor. The rules govern the occurrence of illegitimate/out of place instructions and code sequences for executing the computational and integrated peripheral functions. The stipulated rules are encoded in propositional logic formulae and their compliance is tested individually in all possible execution paths of the application programs. An incorrect sequence of machine code pattern is identified using slicing techniques on the control flow graph generated from the machine code.An algorithm to assist the compiler to eliminate the redundant bank switching codes and decide on optimum data allocation to banked memory resulting in minimum number of bank switching codes in embedded system software is proposed. A relation matrix and a state transition diagram formed for the active memory bank state transition corresponding to each bank selection instruction is used for the detection of redundant codes. Instances of code redundancy based on the stipulated rules for the target processor are identified.This validation and optimization tool can be integrated to the system development environment. It is a novel approach independent of compiler/assembler, applicable to a wide range of processors once appropriate rules are formulated. Program states are identified mainly with machine code pattern, which drastically reduces the state space creation contributing to an improved state-of-the-art model checking. Though the technique described is general, the implementation is architecture oriented, and hence the feasibility study is conducted on PIC16F87X microcontrollers. The proposed tool will be very useful in steering novices towards correct use of difficult microcontroller features in developing embedded systems.

A User-Centric Perspective on Parallel Programming with Focus on OpenMP

The process of developing software that takes advantage of multiple processors is commonly referred to as parallel programming. For various reasons, this process is much harder than the sequential case. For decades, parallel programming has been a problem for a small niche only: engineers working on parallelizing mostly numerical applications in High Performance Computing. This has changed with the advent of multi-core processors in mainstream computer architectures. Parallel programming in our days becomes a problem for a much larger group of developers. The main objective of this thesis was to find ways to make parallel programming easier for them. Different aims were identified in order to reach the objective: research the state of the art of parallel programming today, improve the education of software developers about the topic, and provide programmers with powerful abstractions to make their work easier. To reach these aims, several key steps were taken. To start with, a survey was conducted among parallel programmers to find out about the state of the art. More than 250 people participated, yielding results about the parallel programming systems and languages in use, as well as about common problems with these systems. Furthermore, a study was conducted in university classes on parallel programming. It resulted in a list of frequently made mistakes that were analyzed and used to create a programmers' checklist to avoid them in the future. For programmers' education, an online resource was setup to collect experiences and knowledge in the field of parallel programming - called the Parawiki. Another key step in this direction was the creation of the Thinking Parallel weblog, where more than 50.000 readers to date have read essays on the topic. For the third aim (powerful abstractions), it was decided to concentrate on one parallel programming system: OpenMP. Its ease of use and high level of abstraction were the most important reasons for this decision. Two different research directions were pursued. The first one resulted in a parallel library called AthenaMP. It contains so-called generic components, derived from design patterns for parallel programming. These include functionality to enhance the locks provided by OpenMP, to perform operations on large amounts of data (data-parallel programming), and to enable the implementation of irregular algorithms using task pools. AthenaMP itself serves a triple role: the components are well-documented and can be used directly in programs, it enables developers to study the source code and learn from it, and it is possible for compiler writers to use it as a testing ground for their OpenMP compilers. The second research direction was targeted at changing the OpenMP specification to make the system more powerful. The main contributions here were a proposal to enable thread-cancellation and a proposal to avoid busy waiting. Both were implemented in a research compiler, shown to be useful in example applications, and proposed to the OpenMP Language Committee.

Virtual Radio Engine

Software Defined Radio (SDR) hardware platforms use parallel architectures. Current concepts of developing applications (such as WLAN) for these platforms are complex, because developers describe an application with hardware-specifics that are relevant to parallelism such as mapping and scheduling. To reduce this complexity, we have developed a new programming approach for SDR applications, called Virtual Radio Engine (VRE). VRE defines a language for describing applications, and a tool chain that consists of a compiler kernel and other tools (such as a code generator) to generate executables. The thesis presents this concept, as well as describes the language and the compiler kernel that have been developed by the author. The language is hardware-independent, i.e., developers describe tasks and dependencies between them. The compiler kernel performs automatic parallelization, i.e., it is capable of transforming a hardware-independent program into a hardware-specific program by solving hardware-specifics, in particular mapping, scheduling and synchronizations. Thus, VRE simplifies programming tasks as developers do not solve hardware-specifics manually.

A Compilation Strategy for Numerical Programs Based on Partial Evaluation

This work demonstrates how partial evaluation can be put to practical use in the domain of high-performance numerical computation. I have developed a technique for performing partial evaluation by using placeholders to propagate intermediate results. For an important class of numerical programs, a compiler based on this technique improves performance by an order of magnitude over conventional compilation techniques. I show that by eliminating inherently sequential data-structure references, partial evaluation exposes the low-level parallelism inherent in a computation. I have implemented several parallel scheduling and analysis programs that study the tradeoffs involved in the design of an architecture that can effectively utilize this parallelism. I present these results using the 9- body gravitational attraction problem as an example.