Enhanced selective aerobic alcohol oxidation through nanoengineered catalyst supports

The selective conversion of alcohols to their carbonyl derivatives is a critical step towards a sustainable chemical industry. Heterogeneous Pd catalysts represent some of the most active systems known, even so further studies into the active species and role of support are required. Through controlling support mesostructure, using non-interconnected SBA-15 and interlinked SBA-16 and KIT-6, we have evaluated the role of pore architecture on supported Pd nanoparticles and their subsequent activity for liquid phase aerobic allylic alcohol selective oxidation.[1,2] These synthesised silica supports exhibit high surface areas (>800 m2g-1), and similar mesopore diameters (3.5 to 5 nm), but differ in their pore connectivity and arrangement; p6mm (SBA-15), I3mm (SBA-16) and I3ad (KIT-6). When evaluated alongside commercial non-mesoporous silica (200 m2 g-1) they promote enhanced Pd dispersion with interpenetrating assemblies providing further elevation. Macropore introduction into SBA-15, producing a hierarchical macro-mesoporous silica (MM-SBA-15), allows control over mesopore length and accessibility which escalates Pd distribution to levels akin to KIT-6 and SBA-16. Controlling dispersion, and likewise nanoparticle size, is thus facilitated through the choice of support and additionally Pd loading, with cluster sizes spanning 3.2 to 0.8 nm. X-ray spectroscopies indicate nanoparticles are PdO terminated with the oxide content a function of dispersion. Kinetic studies allude to surface PdO being the active site responsible, with a constant TOF observed, independent of loading and support. This confirms activity is governed by PdO density, whilst also overruling internal mass diffusion constraints. MM-SBA-15 facilitates superior activity and TOFs for long chain acyclic terpene alcohols due to reduced internal mass transport constraints.

An Application of ISO 5725 in Brewing Industry

2002 Mathematics Subject Classification: 62P30, 62P10.

Manager's Perceptions of Alcohol Server Staffing and Training Methods

Over-consumption of alcoholic beverages is a concern of managers of hotels and motels with a club/lounge, restaurant, and tavern. The authors surveyed members of two industry associations in Oklahoma to ascertain alcohol server training methods and managers' perception of the value of such programs.

Implementing Employee Drug and Alcohol Testing: Implications for Hotel Managers

Abuse of drugs and alcohol in the workplace has reached epidemic proportions in the hotel industry. The authors review considerations for drug testing and discuss drug and alcohol testing methods and the manner in which an effective policy should be developed.

Drug Abuse in the Hospitality Industry

Drug and alcohol abuse in the hospitality industry is an ongoing problem, reflective of business as a whole. A series of surveys were conducted at national drug rehabilitation centers seeking information from patients currently or formerly employed in the hotel and restaurant industry. The author identifies a number of problem indicators and makes recommendations relevant to resolutions.

Alcohol Server Liability Law Suits Result From Dram Shop Statutes

The country is experiencing a trend of alcohol server liability law suits resulting from dram shop statutes and common law liability, relatively recent developments in the field of tort law. The author, an expert on liquor liability law, explores the meaning of this trend for the hospitality industry.

Nanotechnology in the food industry I: applications

Nanotechnology is a multidisciplinary science that is having a boom today, providing new products with attractive physicochemical properties for many applications. In agri/feed/food sector, nanotechnology offers great opportunities for obtaining products and innovative applications for agriculture and livestock, water treatment and the production, processing, storage and packaging of food. To this end, a wide variety of nanomaterials, ranging from metals and inorganic metal oxides to organic nanomaterials carrying bioactive ingredients are applied. This review shows an overview of current and future applications of nanotechnology in the food industry. Food additives and materials in contact with food are now the main applications, while it is expected that in the future are in the field of nano-encapsulated and nanocomposites in applications as novel foods, additives, biocides, pesticides and materials food contact.

Recreational drug use within the employees of the mariculture and seafood industry in South Australia

A study of recreational drug use among workers in the Port Lincoln mariculture and seafood industries was conducted by self report questionnaire. High rates of cannabis and alcohol use were revealed during the shore based fish farming season. The occupational health and safety implications of these findings in one of Australia's most dangerous industries are significant. Further research could inform the development of industry specific harm minimisation policies.

Effects of plasticizing and crosslinking on the mechanical and barrier properties of coatings based on blends of starch and poly(vinyl alcohol)

In the last decades, intensive research has been carried out in order to replace oil-based polymers with bio-based polymers due to growing environmental concerns. So far, most of the barrier materials used in food packaging are petroleum-based materials. The purpose of the barrier is to protect the packaged food from oxygen, water vapour, water and fat. The mechanical and barrier properties of coatings based on starch-plasticizer and starch-poly(vinyl alcohol) (PVOH)-plasticizer blends have been studied in the work described in this thesis. The plasticizers used were glycerol, polyethylene glycol and citric acid. In a second step, polyethylene coatings were extruded onto paperboard pre-coated with a starch-PVOH-plasticizer blend. The addition of PVOH to the starch increased the flexibility of the film. Curing of the film led to a decrease in flexibility and an increase in tensile strength. The flexibility of the starch-PVOH films was increased more when glycerol or polyethylene glycol was added than citric acid. The storage modulus of the starch-PVOH films containing citric acid increased substantially at high temperature. It was seen that the addition of polyethylene glycol or citric acid to the starch-PVOH blend resulted in an enrichment of PVOH at the surface of the films. Tensile tests on the films indicated that citric acid acted as a compatibilizer and increased the compatibility of the starch and PVOH in the blend. The addition of citric acid to the coating recipe substantially decreased the water vapour transmission rate through the starch-PVOH coated paperboard, which indicated that citric acid acts as a cross-linker for starch and/or PVOH. The starch-PVOH coatings containing citric acid showed oxygen-barrier properties similar to those of pure PVOH or of a starch-PVOH blend without plasticizer when four coating layers were applied on a paperboard. The oxygen-barrier properties of coatings based on a starch-PVOH blend containing citric acid indicated a cross-linking and increase in compatibility of the starch-PVOH blends. Polyethylene extrusion coating on a pre-coated paperboard resulted in a clear reduction in the oxygen transmission rate for all the pre-coating formulations containing plasticizers. The addition of a plasticizer to the pre-coating reduced the adhesion of polyethylene to pre-coated board. Polyethylene extrusion coating gave a board with a lower oxygen transmission rate when the paperboard was pre-coated with a polyethylene-glycol-containing formulation than with a citric-acid-containing formulation. The addition of polyethylene glycol to pre-coatings indicated an increase in wetting of the pre-coated paperboard by the polyethylene melt, and this may have sealed the small defects in the pre-coating leading to low oxygen transmission rate. The increase in brittleness of starch-PVOH films containing citric acid at a high temperature seemed to have a dominating effect on the barrier properties developed by the extrusion coating process. 

Modelo predictivo para uso del condón y consumo de alcohol como conductas de riesgo relacionadas con el contagio de VIH/SIDA en trabajadoras sexuales de Bogotá- 2015

Objetivo: Determinar un modelo predictivo para uso del condón y consumo de alcohol como conductas de riesgo relacionadas el contagio de VIH/Sida en mujeres trabajadoras sexuales de la ciudad de Bogotá en el año 2015. Métodos Estudio de tipo transversal con diseño observacional, se tomaron 255 mujeres trabajadoras sexuales de la ciudad de Bogotá; La información analizada fue tomada del estudio realizado en cinco ciudades de Colombia en el año 2015, las hipótesis planteadas se soportaron en la asociación entre las condiciones sociodemográficas, de conocimiento, practicas, hábitos, apoyo social y de ocupación propia de las mujeres trabajadoras sexuales que podían explicar y predecir la adopción de conductas riesgosas para VIH/sida como son el uso del condón y el consumo de alcohol en ejercicio de su ocupación. Resultados El promedio de edad de inicio en el trabajo sexual fue 22,1±7,1 años, tres cuartas partes son solteras y residen en estrato dos y tres; el 96,5% dijo usar el condón con el último cliente y el 27,8% de ellas consumió alcohol durante su último servicio. En la conducta de riesgo uso del condón, se encontraron asociados entre otras, la edad [OR=1,10(1,03-1,17)], vivir en estrato dos [OR=7,7(1,5-39,5)], el ingreso por trabajo sexual [OR=1,0(1,0-1,0)], la disponibilidad del condón para el servicio [OR=0,03(0,008-0,16)] y contar con otro método de planificación (ligadura de trompas) [OR=4,47(1,0-18,3)]. En la conducta de riesgo consumo de alcohol, se encontró asociado ente otros: estrato socioeconómico dos [OR=5,8(1,54-22,3)], nivel de escolaridad secundaria [OR=0,12(0,16-0,96)], vivir con otros familiares [OR=3,45(1,7-7,02)], ingreso por trabajo sexual [OR=1,0(1,0-1,0)] y el sitio donde se ofrece el servicio [OR=0,07(0,04-0,15)]. Después de ajustar, se encontró que las variables que mejor explican el uso del condón fueron edad [OR=1,1(1,02-1,17)] y disponibilidad del condón [OR=0,04(0,008-0,024)], el modelo tuvo poca sensibilidad 33,3% y buena capacidad predictiva (84,6%). Las variables que mejor explicaron el consumo de alcohol durante el servicio fueron edad [OR= 0,95(0,91-0,98)], Número de clientes por semana [OR=0,9(0,90-0,98)], sitio donde ofrece el servicio [OR=7,1(3,45-14,8)], y estrato socioeconómico [OR=1,8 (0,90-3,83)], resultando un modelo con buena sensibilidad (71,8%) y buena capacidad predictiva (86,4%). Conclusiones Aspectos como la edad, el estrato socioeconómico, escolaridad, estado civil, ingreso económico por trabajo sexual, edad de inicio en el trabajo sexual, número de clientes antiguos en la última semana, disponibilidad del condón para prestar el servicio y ligadura de trompas como método diferente de planificación, se asociaron estadísticamente con el uso del condón. Sin embargo al ajustar las variables solo la edad y la disponibilidad del condón se mantuvieron como variables explicativas. Cabe anotar, que aunque el modelo mostró buena capacidad predictiva (84,6%), la precisión en sus estimaciones fue baja debido a la poca frecuencia del no uso del condón con el ultimo cliente (3,5%), y la sensibilidad del modelo apenas fue del 33,3%. Por otro lado, factores como la edad, el estrato socioeconómico, nivel educativo, ingreso económico, sitio de oferta del servicio, composición familiar, número de hijos, número de clientes atendidos en la última semana y número de clientes antiguos mostraron asociación estadística con el consumo de alcohol. Sin embargo, al ajustar las variables solo edad, estrato socioeconómico, sitio donde se ofrece el servicio y número de clientes por semana mantuvieron asociación estadística; observándose además que el estrato socioeconómico (uno y dos) y sitio donde se ofrece el servicio (establecimiento), son factores de riesgo para el consumo de alcohol en ejercicio de la ocupación y la poca edad y un número reducido de clientes por semana se comportan como factores de protección para el consumo de alcohol. El modelo predictivo que se desarrolló para la conducta de riesgo de consumo de alcohol, con una sensibilidad del 71,8% y un poder predictivo del 86,4%. .