Observing graphene grow: catalyst-graphene interactions during scalable graphene growth on polycrystalline copper.

Complementary in situ X-ray photoelectron spectroscopy (XPS), X-ray diffractometry, and environmental scanning electron microscopy are used to fingerprint the entire graphene chemical vapor deposition process on technologically important polycrystalline Cu catalysts to address the current lack of understanding of the underlying fundamental growth mechanisms and catalyst interactions. Graphene forms directly on metallic Cu during the high-temperature hydrocarbon exposure, whereby an upshift in the binding energies of the corresponding C1s XPS core level signatures is indicative of coupling between the Cu catalyst and the growing graphene. Minor carbon uptake into Cu can under certain conditions manifest itself as carbon precipitation upon cooling. Postgrowth, ambient air exposure even at room temperature decouples the graphene from Cu by (reversible) oxygen intercalation. The importance of these dynamic interactions is discussed for graphene growth, processing, and device integration.

Nanodiamond formation by hot-filament chemical vapor deposition on carbon ions bombarded Si

Nanocrystalline diamond films were grown by a two-step process on Si(1 0 0) substrate, which was first pretreated by pure carbon ions bombardment. The bombarded Si substrate was then transformed into a hot-filament chemical vapor deposition (HFCVD) system for further growth. Using the usual CH4/H-3 feed gas ratio for micro crystalline diamond growth, nanodiamond crystallites were obtained. The diamond nucleation density is comparable to that obtained by biasing the substrate. The uniformly distributed lattice damage is proposed to be responsible for the formation of the nanodiamond. (C) 2002 Elsevier Science B.V. All rights reserved.

Carbonization process of Si(100) by ion-beam bombardment

The evolution of carbonization process on Si as a function of ion dose has been carried out by mass-selected ion-beam deposition technique. 3C-SiC layer has been obtained at low ion dose, which has been observed by reflection high energy electron diffraction and X-ray photoelectron spectroscopy (XPS). The chemical states of Si and carbon have also been examined as a function of ion dose by XPS. Carbon enrichment was found regardless of the used ion dose here, which may be due to the high deposition rate. The formation mechanism of SiC has also been discussed based on the subplantation process. The work will also provide further understanding of the ion-bombardment effect. (C) 2001 Published by Elsevier Science B.V.

Quark distributions in nuclei and nuclear effects on nucleon structure functions

Extended quark distribution functions are presented obtained by fitting a large amount of experimental data of the l-A DIS process on the basis of an improved nuclear density model. The experimental data of l-A DIS processes with A >= 3 in the region 0.0010 <= x <= 0.9500 axe quite satisfactorily described by using the extended formulae. Our knowledge of the influence of nuclear matter on the quark distributions is deepened.

Ordered droplet formation by thin polymer film dewetting on a stripe-patterned substrate

The dewetting process of thin polystyrene (PS) film on flat and stripe-patterned substrates is presented. Different dewetting processes were observed when the thin PS films annealed at above the glass transition temperature on these different kinds of substrates. The final dewetting on the flat substrate led to formation of polygonal liquid droplets, while on the stripe-patterned substrate, the droplets were observed to align at the centers of the stripes. A possible explanation for the dewetting process on the stripe-patterned substrate is proposed.

Photochromic inorganic-organic multilayer films based on polyoxometalates and poly(ethylenimine)

Novel photochromic inorganic-organic multilayers composed of polyoxometalates and poly(ethylenimine) have been prepared by the layer-by-layer (LbL) self-assembly method. The growth process, composition, surface topography, and photochromic properties of the multilayer films were investigated by UV-visible and Fourier transform infrared spectroscopy, atomic force microscopy, electrospin resonance (ESR), and X-ray photoelectron spectroscopy (XPS). Irradiated with ultraviolet light, the transparent films changed from colorless to blue. Moreover, the blue films showed good reversibility of photochromism, and could recover the colorless state gradually in air, where oxygen plays an important role in the bleaching process. On account of the ESR and XPS results, parts of W6+ in multilayers were reduced to W5+, which exhibited a characteristic blue; a possible photochromic mechanism can be speculated. This work provides basic guideline for the assembly of multilayers with photochromic properties.

Kinetics of atomic force microscope-based scanned probe oxidation on an octadecylated silicon(111) surface

Atomic force microscope (AFM)-based scanned probe oxidation (SPO) nanolithography has been carried out on an octadecyl-terminated Si(111) surface to create dot-array patterns under ambient conditions in contact mode. The kinetics investigations indicate that this SPO process involves three stages. Within the steadily growing stage, the height of oxide dots increases logarithmically with pulse duration and linearly with pulse voltage. The lateral size of oxide dots tends to vary in a similar way. Our experiments show that a direct-log kinetic model is more applicable than a power-of-time law model for the SPO process on an alkylated silicon in demonstrating the dependence of oxide thickness on voltage exposure time within a relatively wide range. In contrast with the SPO on the octodecysilated SiO2/silicon surface, this process can be realized by a lower voltage with a shorter exposure time, which will be of great benefit to the fabrication of integrated nanometer-sized electronic devices on silicon-based substrates. This study demonstrates that the alkylated silicon is a new promising substrate material for silicon-based nanolithography.

The electrochemical reduction reaction of dissolved oxygen on Q235 carbon steel in alkaline solution containing chloride ions

Cyclic voltammetry, electrochemical impedance spectroscopy, and rotating disk electrode voltammetry have been used to study the effect of chloride ions on the dissolved oxygen reduction reaction (ORR) on Q235 carbon steel electrode in a 0.02 M calcium hydroxide (Ca(OH)(2)) solutions imitating the liquid phase in concrete pores. The results indicate that the cathodic process on Q235 carbon steel electrode in oxygen-saturated 0.02 M Ca(OH)(2) with different concentrations of chloride ions contain three reactions except hydrogen evolution: dissolved oxygen reduction, the reduction of Fe(III) to Fe(II), and then the reduction of Fe(II) to Fe. The peak potential of ORR shifts to the positive direction as the chloride ion concentration increases. The oxygen molecule adsorption can be inhibited by the chloride ion adsorption, and the rate of ORR decreases as the concentration of chloride ions increases. The mechanism of ORR is changed from 2e(-) and 4e(-) reactions, occurring simultaneously, to quietly 4e(-) reaction with the increasing chloride ion concentration.

Effects of solder reflow on the reliability of flip-chip on flex interconnections using anisotropic conductive adhesives

This work describes the work of an investigation of the effects of solder reflow process on the reliability of anisotropic conductive film (ACF) interconnection for flip-chip on flex (FCOF) applications. Experiments as well as computer modeling methods have been used. The results show that the contact resistance of ACF interconnections increases after the reflow and the magnitude of the increase is strongly correlated to the peak reflow temperature. In fact, nearly 40 percent of the joints are open when the peak reflow temperature is 260°C, while there is no opening when the peak temperature is 210°C. It is believed that the coefficient of thermal expansion (CTE) mismatch between the polymer particle and the adhesive matrix is the main cause of this contact degradation. To understand this phenomenon better, a three-dimensional (3-D) finite element (FE) model of an ACF joint has been analyzed in order to predict the stress distribution in the conductive particles, adhesive matrix and metal pads during the reflow process. The stress level at the interface between the particle and its surrounding materials is significant and it is the highest at the interface between the particle and the adhesive matrix.

The effect of 3D weaving and consolidation on carbon fiber tows, fabrics, and composites

This article investigates the damage imparted on load-bearing carbon fibers during the 3D weaving process and the subsequent compaction behavior of 3D woven textile preforms. The 3D multi-layer reinforcements were manufactured on a textile loom with few mechanical modifications to produce preforms with fibers orientated in the warp, weft, and through-the-thickness directions. Tensile tests were conducted on three types of commercially available carbon fibers, 12k HTA, 6k HTS, and 3k HTS in an attempt to quantify the effect of fiber damage induced during the 3D weaving process on the mechanical and physical performance of the fiber tows in the woven composite. The tests were conducted on fiber tows sampled from different locations in the manufacturing process from the bobbin, through the creel and loom mechanism, to the final woven fabric. Mechanical and physical testing were then conducted to quantify the tow geometry, orientation and the effect of compaction during manufacture of two styles of 3D woven composite by vacuumassisted resin transfer molding (VaRTM).

Weathering resistance of thin plasma polymer films on pre-coated steel

O trabalho apresentado teve origem no projecto de investigação “Tailored Thin Plasma Polymers Films for Surface Engineering of Coil Coated Steel”, financiado pelo Programa Europeu ECSC Steel Research. Sistemas de aço galvanizado pré-pintado em banda à base de poliéster e poliuretano foram submetidos a um processo de polimerização por plasma onde um filme fino foi depositado de modo a modificar as propriedades de superfície. Foram usados reactores de cátodo oco, microondas e rádio frequência para a deposição do polímero fino. Os sistemas preparados foram analisados de modo a verificar a influência do processo de polimerização por plasma na alteração das propriedades barreira dos sistemas pré-pintados em banda. Foi estudado o efeito dos diferentes passos do processo de polimerização por plasma, bem como o efeito de diferentes variáveis operatórias. A mistura precursora foi variada de modo a modificar as propriedades da superfície de modo a poder vir a obter maior hidrofobicidade, maior resistência a marcas digitais, bem como maior facilidade de limpeza. Os testes foram conduzidos em solução de NaCl 0,5 M. Para o trabalho foram usadas técnicas de análise da morfologia da superfície como Microscopia de Força Atómica e Microscopia Electrónica de Varrimento. As propriedades electroquímicas dos sistemas foram estudadas por Espectroscopia de Impedância Electroquímica. A estrutura dos filmes gerados no processo de polimerização por plasma foi caracterizada por Microscopia de Transmissão Electrónica. A modificação das propriedades ópticas devido ao processo de polimerização por plasma foi também obtida.

E-assessment em ensino a distância on-line: estudo exploratório no curso de licenciatura em gestão de negócios da Universidade Eduardo Mondlane

A evolução acelerada da tecnologia, com um grande impacto em quase todos os segmentos da humanidade, coloca o homem perante novos desafios, com vários graus de complexidade. Cada dia que passa, estes desafios exigem novas competências e estratégias que devem ser adequadas a cada contexto. A dinâmica das tecnologias de comunicação e informação impulsionaram a evolução do ensino a distância (EaD), o que de certo modo tem exigido grandemente às instituições provedoras do EaD em geral e, em particular, às provedoras do EaD on-line novas formas de gestão, e novas formas de ensinar, fazer aprender os seus estudantes e avaliar as suas aprendizagens. No sentido de contribuir para a evolução e melhoramento do processo de avaliação das aprendizagens on-line, desenvolveu-se um estudo sobre o tema avaliação das aprendizagens on-line como elemento potenciador da interação em EaD. O desenvolvimento do tema foi orientado por um referencial teórico e contextual e concretizou-se, na sua vertente empírica, num estudo de caso exploratório. Este estudo desenvolveu-se em duas fases. Fase I: de caracterização de conceções e “práticas” vigentes de avaliação das aprendizagens on-line no Curso de licenciatura de Gestão de Negócios (LGN) da Universidade Eduardo Mondlane (UEM) de Moçambique; Fase II: de conceção, implementação e avaliação de uma proposta alternativa de avaliação das aprendizagens on-line no Curso de LGN. Para a consecução do estudo empírico concorreram um conjunto de procedimentos metodológicos que envolveu diversas técnicas e instrumentos de recolha de dados. Na fase I recorreu-se à entrevista a seis atores do Curso de LGN (3 professores, 3 assessores pedagógicos e 3 estudantes) e à análise documental (documentos relativos à conceção do Curso e outros relativos à sua implementação). Na fase II recorreu-se à observação participante, a um questionário respondido pelos estudantes participantes, a um relatório elaborado pelo professor colaborador na implementação da proposta por nós concebido, e a documentos retirados da plataforma usada no Curso de LGN, a plataforma Aulanet, nomeadamente quanto às interações dos estudantes em fóruns e chats. Os dados recolhidos foram sujeitos a análises quantitativas e qualitativas.Dos resultados obtidos na Fase I realça-se a necessidade sentida pelos entrevistados de se mudarem práticas de avaliação on-line, nomeadamente de forma a potenciar a interação e interatividade e permitir que a classificação nos módulos não fosse apenas resultado de um exame final. Dos resultados obtidos na Fase II enfatiza-se a apreciação globalmente positiva da nova metodologia de avaliação das aprendizagens on-line, quer pelos estudantes, quer pelo professor participante. Foram identificados como pontos fortes: o aumento das interações na plataforma, em particular nos fóruns e chats; as interações geraram uma dinâmica na evolução dos estudantes no que diz respeito ao desenvolvimento das suas competências no seu sucesso académico; a avaliação, por explicitar os critérios e indicadores, tornou-se mais transparente e orientadora do trabalho dos estudantes e do professor. Porém foram identificados alguns pontos menos fortes, nomeadamente: a sobrecarga de trabalho do professor e a não adesão total dos estudantes à metodologia proposta. Dada a natureza exploratória do estudo sugere-se a sua continuidade, através do envolvimento de outros professores e estudantes.

New perspectives in the use of ink evidence in forensic science: Part I. Development of a quality assurance process for forensic ink analysis by HPTLC

The level of information provided by ink evidence to the criminal and civil justice system is limited. The limitations arise from the weakness of the interpretative framework currently used, as proposed in the ASTM 1422-05 and 1789-04 on ink analysis. It is proposed to use the likelihood ratio from the Bayes theorem to interpret ink evidence. Unfortunately, when considering the analytical practices, as defined in the ASTM standards on ink analysis, it appears that current ink analytical practices do not allow for the level of reproducibility and accuracy required by a probabilistic framework. Such framework relies on the evaluation of the statistics of the ink characteristics using an ink reference database and the objective measurement of similarities between ink samples. A complete research programme was designed to (a) develop a standard methodology for analysing ink samples in a more reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in a forensic context. This report focuses on the first of the three stages. A calibration process, based on a standard dye ladder, is proposed to improve the reproducibility of ink analysis by HPTLC, when these inks are analysed at different times and/or by different examiners. The impact of this process on the variability between the repetitive analyses of ink samples in various conditions is studied. The results show significant improvements in the reproducibility of ink analysis compared to traditional calibration methods.

Sport-Specific Arbitration in Canada: A Qualitative Investigation of Four Athletes' Perceptions of the Fairness of the Process

This thesis explored Canadian high performance Athletes' perceptions of the fairness of the SDRCC sport-specific arbitral process. Leventhal’s (1980) model of procedural justice judgment was found to be an effective tool for exploring Athletes’ perceptions of the fairness of the process. Five of his six procedural justice antecedents: consistency, bias suppression, accuracy of information, representativeness, and ethicality influenced the Athletes’ perceptions of the fairness of the process. Emergent data also revealed that the Athletes’ perceptions of fairness were also influenced by three contextual factors and an additional antecedent of procedural justice. Efficiency of the process, inherent power imbalance between Athletes and NSOs, and the measurable effect of the process on personal and professional relationships differentiate sport-specific arbitration from most other processes of allocation. The data also indicated that the opportunity to voice one’s case was also an important determinant of the Athletes’ perceptions of the fairness of the process.

Parle-t-on de territoire en aménagement du territoire? : la construction des enjeux en contexte de planification collaborative

Le débat public en aménagement du territoire constitue un exercice paradoxal. Bien qu’il fasse nominalement référence au territoire, ce débat public aborde cet objet de façon superficielle. Ce mémoire aborde cette problématique en explorant les utilisations de la notion de territoire formulées dans le cadre d’un exercice de consultation publique sur un projet de revitalisation à Montréal, soit le Programme particulier d’urbanisme du Quartier des spectacles – Pôle du Quartier latin, est étudié. L’analyse se décline en deux étapes. Le sens accordé à la position géographique du Quartier latin et ses répercussions sur les dynamiques d’aménagement à long terme (structurales) sont s’abord explorées. Ensuite, les discours des intervenants au débat public sont analysés à l’aide d’une loupe poststructuraliste. Nos résultats démontrent qu’une majorité de participants ne considèrent pas le territoire comme construction sociale. Toutefois, les intervenants qui adoptent le point de vue contraire ont tendance à adopter une position plus critique face au projet. Ce constat remet en question les fondements de l’intervention proposée par les autorités municipales et, plus largement, interroge la prise en compte du concept de territoire en contexte de planification collaborative et post-collaborative.