Lääketehtaan valmistusosaston toimitusketjun arvovirtamallintaminen

Tässä diplomityössä laadittiin prosessikuvaus lääketehtaan valmistusosaston toimitusketjusta. Työn tavoitteena oli kuvata toimitusketjun eri prosessit nykytilassaan ja luoda samalla työkalu arvovirtakarttojen luomiseen lean-tuotantomallin mukaisesti. Prosessikaaviot toteutettiin soveltaen IDEF0-prosessienmallinnusmenetelmää. Kaavioissa kuvattiin järjestelmällisesti eri organisaatioiden prosessit sekä niihin liittyvät informaatio- ja materiaalivirrat. Esimerkki arvovirran tunnistamisesta ja arvovirtakarttojen luomisesta tehtiin yhdestä prosessivaiheesta, pakkausprosessista, josta myös määritettiin lean-tuotantomallin mukaisesti sen arvoa tuottavat, arvoa tuottamattomat, mutta välttämättömät ja arvoa tuottamattomat työvaiheet eli hukka. Arvovirran tunnistus suoritettiin työntutkimuksen avulla. Pakkausprosessin arvovirran määrittämisessä havaittiin, että tuotevaihdon aikana työntekijöiden käyttämästä työajasta arvoa tuottavia työvaiheita oli 3 %, arvoa lisäämättömiä työvaiheita, mutta välttämättömiä oli 53 % ja arvoa lisäämätöntä eli hukkaa oli 44,0 %. Pakkaustyön aikana työntekijöiden työajasta arvoa lisääviksi työvaiheiksi saatiin 4 %. Arvoa lisäämättömiä työvaiheita, mutta välttämättömiä oli 38 % ja arvoa lisäämätöntä eli hukkaa oli 58 %. Koneajasta tuotteen arvoa lisäävää oli koneesta riippuen 50–76 % ja arvoa lisäämätöntä 24–50 %. Työn lopuksi esitettiin jatkotoimenpiteitä hukan eliminoimiseksi.

The Relationship between Dementia Family Caregivers' Traditional Values and Beliefs about Caregiving and Well-being

Introduction: Canada’s aging population is diverse and this diversity will continue to grow for the next two decades (Government of Canada, 2002; Katz, 2005; Statistics Canada, 2010). Objective: to examine the relationship between dementia family caregivers’ traditionally-based beliefs about caregiving, their caregiving experience, and their well-being. Method: exploratory secondary data analysis of cross-sectional survey data from 76 community caregivers of persons with dementia in Ontario. Results: traditional values for caregiving was independently associated with coping resources and health status but not depression symptoms. Caregiver self-efficacy and social support both partially mediated the relationship between beliefs about caregiving and caregiver health status. Discussion: Findings from this exploratory study are consistent with stress process models of culture and caregiving. The finding that self-efficacy was associated with traditional values and that it mediated the relationship between traditional values and caregiver well-being is new to the literature.

L’impact de l’utilisation du traitement de texte sur la qualité de l’écriture d’élèves québécois du secondaire

Dans les dernières décennies, le présumé déclin de la compétence scripturale des élèves québécois a soulevé les passions. Force est d’admettre que leurs compétences sont lacunaires : tant les rapports du ministère de l’Éducation (Jalbert, 2006; Ouellet, 1984) que les études scientifiques ou gouvernementales (Bureau, 1985; Groupe DIEPE, 1995; Roberge, 1984) révèlent leur incapacité à s’approprier l’écriture. Les TIC pourraient bien faire partie de la solution : on sait pertinemment qu’elles favorisent la réussite scolaire dans certains contextes (Barayktar, 2001; Christmann & Badgett, 2003; Waxman, Lin, & Michko, 2003). Toutefois, modifient-elles le processus scriptural au point d’en faciliter l’apprentissage? Cette question constitue le cœur de l’actuel projet de recherche. Les modèles du processus d’écriture comme celui de Hayes et Flower (Flower & Hayes, 1981; Hayes, 1995; Hayes & Flower, 1980) rappellent que les TIC font partie du contexte de production; à ce titre, elles influencent autant la qualité des textes que les processus cognitifs et la motivation. Elles libèrent notamment des ressources cognitives, puisqu’elles prennent en charge certaines opérations, comme la calligraphie (Daiute, 1983). Partant, le scripteur peut se concentrer davantage sur des tâches plus complexes. Des méta-analyses (Bangert-Drowns, 1993; Goldberg, Russell, & Cook, 2003) attestent que le traitement de texte exerce un effet minime, mais statistiquement significatif sur la qualité de l’écriture. Toutefois, il est associé à des révisions en surface (Faigley & Witte, 1981; Figueredo & Varnhagen, 2006). Rares sont les projets de recherche qui explorent simultanément l’impact du traitement de texte sur plusieurs dimensions du processus scriptural; plus rares encore sont les travaux qui se sont intéressés à ce sujet depuis les années 1990. Pour pallier ce manque, cette thèse de doctorat vise à 1) mesurer l’effet des TIC sur la qualité de l’écriture; 2) décrire l’impact des TIC sur les processus cognitifs de révision et de traduction; 3) mesurer l’impact des TIC sur la motivation à écrire. Pour y arriver, nous recourons à une méthodologie mixte. D’une part, un devis de recherche quasi expérimental nous permet de comparer les scripteurs technologiques aux scripteurs traditionnels; d’autre part, une approche qualitative nous laisse accéder aux pensées et aux perceptions des utilisateurs de l’ordinateur. Les trois articles qui constituent le cœur de cette thèse rapportent les résultats relatifs à chacun des objectifs spécifiques de recherche. Dans le premier texte, nous avons mesuré les effets du traitement de texte sur la compétence scripturale. L’analyse statistique des données colligées nous a permis de dégager une amélioration des performances, strictement en orthographe d’usage. En comparaison, les élèves du groupe témoin se sont améliorés davantage en cohérence textuelle et ont mieux performé en orthographe grammaticale. Le deuxième article propose de faire la lumière sur ces résultats. Nous y étudions donc l’impact des TIC sur le processus cognitif de révision. Ce volet, basé sur une approche qualitative, recourt largement à l’observation vidéographiée. Nous y mettons d’abord en évidence le grand nombre d’erreurs commises lors des séances d’écriture technologiques; nous faisons également ressortir la sous-utilisation du vérificateur linguistique, qui pose peu de diagnostics appropriés ou qui est souvent ignoré des scripteurs. Toutefois, malgré cette sous-utilisation du traitement de texte, des entrevues de groupe font état de perceptions positives à l’égard des TIC; on leur prête des vertus certaines et elles sont jugées motivantes. Ce phénomène constitue le cœur du dernier article, au cours duquel nous tâchons de mesurer l’impact du mode d’écriture sur la motivation à écrire. Nous menons ce volet dans une perspective quantitative. La motivation des participants a été mesurée avec une échelle de motivation. L’analyse statistique des données montre que les élèves technologiques sont motivés intrinsèquement par les technologies, tandis que leurs pairs du groupe témoin sont amotivés. Lors du chapitre conclusif, nous mettons ces résultats en relation, tentant d’expliquer globalement l’impact des TIC dans le processus scriptural. Au terme de notre thèse, nous formulons des recommandations destinées aux praticiens et aux décideurs engagés dans le système éducatif.

Designing in the real world is complex anyway - so what?

Designing is a heterogeneous, fuzzily defined, floating field of various activities and chunks of ideas and knowledge. Available theories about the foundations of designing as presented in "the basic PARADOX" (Jonas and Meyer-Veden 2004) have evoked the impression of Babylonian confusion. We located the reasons for this "mess" in the "non-fit", which is the problematic relation of theories and subject field. There seems to be a comparable interface problem in theory-building as in designing itself. "Complexity" sounds promising, but turns out to be a problematic and not really helpful concept. I will argue for a more precise application of systemic and evolutionary concepts instead, which - in my view - are able to model the underlying generative structures and processes that produce the visible phenomenon of complexity. It does not make sense to introduce a new fashionable meta-concept and to hope for a panacea before having clarified the more basic and still equally problematic older meta-concepts. This paper will take one step away from "theories of what" towards practice and doing and try to have a closer look at existing process models or "theories of how" to design instead. Doing this from a systemic perspective leads to an evolutionary view of the process, which finally allows to specify more clearly the "knowledge gaps" inherent in the design process. This aspect has to be taken into account as constitutive of any attempt at theory-building in design, which can be characterized as a "practice of not-knowing". I conclude, that comprehensive "unified" theories, or methods, or process models run aground on the identified knowledge gaps, which allow neither reliable models of the present, nor reliable projections into the future. Consolation may be found in performing a shift from the effort of adaptation towards strategies of exaptation, which means the development of stocks of alternatives for coping with unpredictable situations in the future.

Knowledge Building in Landscape Architecture

The objective of this study was to develop an internet-based seminar framework applicable for landscape architecture education. This process was accompanied by various aims. The basic expectation was to keep the main characteristics of landscape architecture education also in the online format. On top of that, four further objectives were anticipated: (1) training of competences for virtual team work, (2) fostering intercultural competence, (3) creation of equal opportunities for education through internet-based open access and (4) synergy effects and learning processes across institutional boundaries. This work started with the hypothesis that these four expected advantages would compensate for additional organisational efforts caused by the online delivery of the seminars and thus lead to a sustainable integration of this new learning mode into landscape architecture curricula. This rationale was followed by a presentation of four areas of knowledge to which the seminar development was directly related (1) landscape architecture as a subject and its pedagogy, (2) general learning theories, (3) developments in the ICT sector and (4) wider societal driving forces such as global citizenship and the increase of open educational resources. The research design took the shape of a pedagogical action research cycle. This approach was constructive: The author herself is teaching international landscape architecture students so that the model could directly be applied in practice. Seven online seminars were implemented in the period from 2008 to 2013 and this experience represents the core of this study. The seminars were conducted with varying themes while its pedagogy, organisation and the technological tools remained widely identical. The research design is further based on three levels of observation: (1) the seminar design on the basis of theory and methods from the learning sciences, in particular educational constructivism, (2) the seminar evaluation and (3) the evaluation of the seminars’ long term impact. The seminar model itself basically consists of four elements: (1) the taxonomy of learning objectives, (2) ICT tools and their application and pedagogy, (3) process models and (4) the case study framework. The seminar framework was followed by the presentation of the evaluation findings. The major findings of this study can be summed up as follows: Implementing online seminars across educational and national boundaries was possible both in term of organisation and technology. In particular, a high level of cultural diversity among the seminar participants has definitively been achieved. However, there were also obvious obstacles. These were primarily competing study commitments and incompatible schedules among the students attending from different academic programmes, partly even in different time zones. Both factors had negative impact on the individual and working group performances. With respect to the technical framework it can be concluded that the majority of the participants were able to use the tools either directly without any problem or after overcoming some smaller problems. Also the seminar wiki was intensively used for completing the seminar assignments. However, too less truly collaborative text production was observed which could be improved by changing the requirements for the collaborative task. Two different process models have been applied for guiding the collaboration of the small groups and both were in general successful. However, it needs to be said that even if the students were able to follow the collaborative task and to co-construct and compare case studies, most of them were not able to synthesize the knowledge they had compiled. This means that the area of consideration often remained on the level of the case and further reflections, generalisations and critique were largely missing. This shows that the seminar model needs to find better ways for triggering knowledge building and critical reflection. It was also suggested to have a more differentiated group building strategy in future seminars. A comparison of pre- and post seminar concept maps showed that an increase of factual and conceptual knowledge on the individual level was widely recognizable. Also the evaluation of the case studies (the major seminar output) revealed that the students have undergone developments of both the factual and the conceptual knowledge domain. Also their self-assessment with respect to individual learning development showed that the highest consensus was achieved in the field of subject-specific knowledge. The participants were much more doubtful with regard to the progress of generic competences such as analysis, communication and organisation. However, 50% of the participants confirmed that they perceived individual development on all competence areas the survey had asked for. Have the additional four targets been met? Concerning the competences for working in a virtual team it can be concluded that the vast majority was able to use the internet-based tools and to work with them in a target-oriented way. However, there were obvious differences regarding the intensity and activity of participation, both because of external and personal factors. A very positive aspect is the achievement of a high cultural diversity supporting the participants’ intercultural competence. Learning from group members was obviously a success factor for the working groups. Regarding the possibilities for better accessibility of educational opportunities it became clear that a significant number of participants were not able to go abroad during their studies because of financial or personal reasons. They confirmed that the online seminar was to some extent a compensation for not having been abroad for studying. Inter-institutional learning and synergy was achieved in so far that many teachers from different countries contributed with individual lectures. However, those teachers hardly ever followed more than one session. Therefore, the learning effect remained largely within the seminar learning group. Looking back at the research design it can be said that the pedagogical action research cycle was an appropriate and valuable approach allowing for strong interaction between theory and practice. However, some more external evaluation from peers in particular regarding the participants’ products would have been valuable.

Optimierung von Betriebsstrategien für elektrifizierte Antriebskonzepte

Im Rahmen dieser Arbeit wird eine gemeinsame Optimierung der Hybrid-Betriebsstrategie und des Verhaltens des Verbrennungsmotors vorgestellt. Die Übernahme von den im Steuergerät verwendeten Funktionsmodulen in die Simulationsumgebung für Fahrzeuglängsdynamik stellt eine effiziente Applikationsmöglichkeit der Originalparametrierung dar. Gleichzeitig ist es notwendig, das Verhalten des Verbrennungsmotors derart nachzubilden, dass das stationäre und das dynamische Verhalten, inklusive aller relevanten Einflussmöglichkeiten, wiedergegeben werden kann. Das entwickelte Werkzeug zur Übertragung der in Ascet definierten Steurgerätefunktionen in die Simulink-Simulationsumgebung ermöglicht nicht nur die Simulation der relevanten Funktionsmodule, sondern es erfüllt auch weitere wichtige Eigenschaften. Eine erhöhte Flexibilität bezüglich der Daten- und Funktionsstandänderungen, sowie die Parametrierbarkeit der Funktionsmodule sind Verbesserungen die an dieser Stelle zu nennen sind. Bei der Modellierung des stationären Systemverhaltens des Verbrennungsmotors erfolgt der Einsatz von künstlichen neuronalen Netzen. Die Auswahl der optimalen Neuronenanzahl erfolgt durch die Betrachtung des SSE für die Trainings- und die Verifikationsdaten. Falls notwendig, wird zur Sicherstellung der angestrebten Modellqualität, das Interpolationsverhalten durch Hinzunahme von Gauß-Prozess-Modellen verbessert. Mit den Gauß-Prozess-Modellen werden hierbei zusätzliche Stützpunkte erzeugt und mit einer verminderten Priorität in die Modellierung eingebunden. Für die Modellierung des dynamischen Systemverhaltens werden lineare Übertragungsfunktionen verwendet. Bei der Minimierung der Abweichung zwischen dem Modellausgang und den Messergebnissen wird zusätzlich zum SSE das 2σ-Intervall der relativen Fehlerverteilung betrachtet. Die Implementierung der Steuergerätefunktionsmodule und der erstellten Steller-Sensor-Streckenmodelle in der Simulationsumgebung für Fahrzeuglängsdynamik führt zum Anstieg der Simulationszeit und einer Vergrößerung des Parameterraums. Das aus Regelungstechnik bekannte Verfahren der Gütevektoroptimierung trägt entscheidend zu einer systematischen Betrachtung und Optimierung der Zielgrößen bei. Das Ergebnis des Verfahrens ist durch das Optimum der Paretofront der einzelnen Entwurfsspezifikationen gekennzeichnet. Die steigenden Simulationszeiten benachteiligen Minimumsuchverfahren, die eine Vielzahl an Iterationen benötigen. Um die Verwendung einer Zufallsvariablen, die maßgeblich zur Steigerung der Iterationanzahl beiträgt, zu vermeiden und gleichzeitig eine Globalisierung der Suche im Parameterraum zu ermöglichen wird die entwickelte Methode DelaunaySearch eingesetzt. Im Gegensatz zu den bekannten Algorithmen, wie die Partikelschwarmoptimierung oder die evolutionären Algorithmen, setzt die neu entwickelte Methode bei der Suche nach dem Minimum einer Kostenfunktion auf eine systematische Analyse der durchgeführten Simulationsergebnisse. Mit Hilfe der bei der Analyse gewonnenen Informationen werden Bereiche mit den bestmöglichen Voraussetzungen für ein Minimum identifiziert. Somit verzichtet das iterative Verfahren bei der Bestimmung des nächsten Iterationsschrittes auf die Verwendung einer Zufallsvariable. Als Ergebnis der Berechnungen steht ein gut gewählter Startwert für eine lokale Optimierung zur Verfügung. Aufbauend auf der Simulation der Fahrzeuglängsdynamik, der Steuergerätefunktionen und der Steller-Sensor-Streckenmodelle in einer Simulationsumgebung wird die Hybrid-Betriebsstrategie gemeinsam mit der Steuerung des Verbrennungsmotors optimiert. Mit der Entwicklung und Implementierung einer neuen Funktion wird weiterhin die Verbindung zwischen der Betriebsstrategie und der Motorsteuerung erweitert. Die vorgestellten Werkzeuge ermöglichten hierbei nicht nur einen Test der neuen Funktionalitäten, sondern auch eine Abschätzung der Verbesserungspotentiale beim Verbrauch und Abgasemissionen. Insgesamt konnte eine effiziente Testumgebung für eine gemeinsame Optimierung der Betriebsstrategie und des Verbrennungsmotorverhaltens eines Hybridfahrzeugs realisiert werden.

Measuring Value in Product Development

“What is value in product development?” is the key question of this paper. The answer is critical to the creation of lean in product development. By knowing how much value is added by product development (PD) activities, decisions can be more rationally made about how to allocate resources, such as time and money. In order to apply the principles of Lean Thinking and remove waste from the product development system, value must be precisely defined. Unfortunately, value is a complex entity that is composed of many dimensions and has thus far eluded definition on a local level. For this reason, research has been initiated on “Measuring Value in Product Development.” This paper serves as an introduction to this research. It presents the current understanding of value in PD, the critical questions involved, and a specific research design to guide the development of a methodology for measuring value. Work in PD value currently focuses on either high-level perspectives on value, or detailed looks at the attributes that value might have locally in the PD process. Models that attempt to capture value in PD are reviewed. These methods, however, do not capture the depth necessary to allow for application. A methodology is needed to evaluate activities on a local level to determine the amount of value they add and their sensitivity with respect to performance, cost, time, and risk. Two conceptual tools are proposed. The first is a conceptual framework for value creation in PD, referred to here as the Value Creation Model. The second tool is the Value-Activity Map, which shows the relationships between specific activities and value attributes. These maps will allow a better understanding of the development of value in PD, will facilitate comparison of value development between separate projects, and will provide the information necessary to adapt process analysis tools (such as DSM) to consider value. The key questions that this research entails are: · What are the primary attributes of lifecycle value within PD? · How can one model the creation of value in a specific PD process? · Can a useful methodology be developed to quantify value in PD processes? · What are the tools necessary for application? · What PD metrics will be integrated with the necessary tools? The research milestones are: · Collection of value attributes and activities (September, 200) · Development of methodology of value-activity association (October, 2000) · Testing and refinement of the methodology (January, 2001) · Tool Development (March, 2001) · Present findings at July INCOSE conference (April, 2001) · Deliver thesis that captures a formalized methodology for defining value in PD (including LEM data sheets) (June, 2001) The research design aims for the development of two primary deliverables: a methodology to guide the incorporation of value, and a product development tool that will allow direct application.

La intuición en la toma de decisiones estratégicas de la dirección empresarial

Las organizaciones han sido percibidas y descritas por los académicos como un producto de la racionalidad, por lo tanto su gestión debe realizarse de manera racional. En el presente trabajo se reivindica el rol de la intuición en los procesos de toma de decisiones estratégicas en las organizaciones; para ello, una vez descrita la “organización racional” y sus implicaciones, con ayuda de la psicología y de la sociología se desvirtúa la separación entre racionalidad e intuición. Mediante el trabajo de campo realizado y utilizando como herramientas de análisis los modelos duales de cognición y comportamiento desarrollados en la última década, se evidencia que la intuición juega un papel importante y relevante en los procesos de toma de decisiones estratégicas en las organizaciones, papel que ha sido deliberadamente olvidado por la academia y que debe ser estudiado, con el fin de poder tener una comprensión integral de las organizaciones.

Dynamic data reconciliation for sequential modular simulators

In this paper the implementation of dynamic data reconciliation techniques for sequential modular models is described. The paper is organised as follows. First, an introduction to dynamic data reconciliation is given. Then, the online use of rigorous process models is introduced. The sequential modular approach to dynamic simulation is briefly discussed followed by a short review of the extended Kalman filter. The second section describes how the modules are implemented. A simulation case study and its results are also presented.

QoS Evaluation of BandwidthSchedulers in IPTV Networks OfferedSRD Fluid Video Traffic

Internet protocol TV (IPTV) is predicted to be the key technology winner in the future. Efforts to accelerate the deployment of IPTV centralized model which is combined of VHO, encoders, controller, access network and Home network. Regardless of whether the network is delivering live TV, VOD, or Time-shift TV, all content and network traffic resulting from subscriber requests must traverse the entire network from the super-headend all the way to each subscriber's Set-Top Box (STB).IPTV services require very stringent QoS guarantees When IPTV traffic shares the network resources with other traffic like data and voice, how to ensure their QoS and efficiently utilize the network resources is a key and challenging issue. For QoS measured in the network-centric terms of delay jitter, packet losses and bounds on delay. The main focus of this thesis is on the optimized bandwidth allocation and smooth datatransmission. The proposed traffic model for smooth delivering video service IPTV network with its QoS performance evaluation. According to Maglaris et al [5] First, analyze the coding bit rate of a single video source. Various statistical quantities are derived from bit rate data collected with a conditional replenishment inter frame coding scheme. Two correlated Markov process models (one in discrete time and one incontinuous time) are shown to fit the experimental data and are used to model the input rates of several independent sources into a statistical multiplexer. Preventive control mechanism which is to be include CAC, traffic policing used for traffic control.QoS has been evaluated of common bandwidth scheduler( FIFO) by use fluid models with Markovian queuing method and analysis the result by using simulator andanalytically, Which is measured the performance of the packet loss, overflow and mean waiting time among the network users.

QoS evaluation of Bandwidth Schedulers in IPTV Networks Offered SRD Fluid Video Traffic

Internet protocol TV (IPTV) is predicted to be the key technology winner in the future. Efforts to accelerate the deployment of IPTV centralized model which is combined of VHO, encoders, controller, access network and Home network. Regardless of whether the network is delivering live TV, VOD, or Time-shift TV, all content and network traffic resulting from subscriber requests must traverse the entire network from the super-headend all the way to each subscriber's Set-Top Box (STB). IPTV services require very stringent QoS guarantees When IPTV traffic shares the network resources with other traffic like data and voice, how to ensure their QoS and efficiently utilize the network resources is a key and challenging issue. For QoS measured in the network-centric terms of delay jitter, packet losses and bounds on delay. The main focus of this thesis is on the optimized bandwidth allocation and smooth data transmission. The proposed traffic model for smooth delivering video service IPTV network with its QoS performance evaluation. According to Maglaris et al [5] first, analyze the coding bit rate of a single video source. Various statistical quantities are derived from bit rate data collected with a conditional replenishment inter frame coding scheme. Two correlated Markov process models (one in discrete time and one in continuous time) are shown to fit the experimental data and are used to model the input rates of several independent sources into a statistical multiplexer. Preventive control mechanism which is to be including CAC, traffic policing used for traffic control. QoS has been evaluated of common bandwidth scheduler( FIFO) by use fluid models with Markovian queuing method and analysis the result by using simulator and analytically, Which is measured the performance of the packet loss, overflow and mean waiting time among the network users.

A influência do processo de terceirização de tecnologia da informação na utilização dos modelos de contratação de serviços: um estudo de casos múltiplos

The change in the economic world and the emergence of Internet as a tool for communication and integration among the markets have forced organizations to adopt a different structure, process-oriented with a focus on information management. Thus, information technology has gained prominence in the organizational context, increasing its complexity and range of services provided by this function. Moreover, outsourcing has become an important model for flexible corporate structure, helping organizations to achieve better results when carrying out their activities and processes and be more competitive. To make the IT outsourcing, it is necessary to follow certain steps that range from strategic assessment to the management of outsourced service. Such steps can influence the form of contracting services, varying the types of service providers and contractors. Thus, the study aimed to identify how this IT outsourcing process influences the use of models for contracting services. For this, a study was conducted in multiple cases study involving two companies in Rio Grande do Norte State, specifically the health sector. Data collection was carried out with the CIOs of the companies surveyed through semi-structured interviews. According to the results obtained, it was found that the outsourcing process more structured influences the use of a more advanced contracting model. However, there are features found in these steps carrying more clearly this influence, as the goals pursued by outsourcing, the criteria used in selecting the supplier, a contract negotiation, how to transition services and the use of methods management, but can vary depending on the level of maturity in the relationship of the companies examined. Moreover, it was found that the use of contracting model may also influence how it is developed the IT outsourcing process, requiring or not its more formalized and organization

Estudo das propriedades críticas do processo de contato por par para diferentes atualizações

We study the critical behavior of the one-dimensional pair contact process (PCP), using the Monte Carlo method for several lattice sizes and three different updating: random, sequential and parallel. We also added a small modification to the model, called Monte Carlo com Ressucitamento" (MCR), which consists of resuscitating one particle when the order parameter goes to zero. This was done because it is difficult to accurately determine the critical point of the model, since the order parameter(particle pair density) rapidly goes to zero using the traditional approach. With the MCR, the order parameter becomes null in a softer way, allowing us to use finite-size scaling to determine the critical point and the critical exponents β, ν and z. Our results are consistent with the ones already found in literature for this model, showing that not only the process of resuscitating one particle does not change the critical behavior of the system, it also makes it easier to determine the critical point and critical exponents of the model. This extension to the Monte Carlo method has already been used in other contact process models, leading us to believe its usefulness to study several others non-equilibrium models

Uma abordagem anotativa para gerência de variabilidade em linhas de processos de software: concepção, implementação e avaliação

Nowadays, the importance of using software processes is already consolidated and is considered fundamental to the success of software development projects. Large and medium software projects demand the definition and continuous improvement of software processes in order to promote the productive development of high-quality software. Customizing and evolving existing software processes to address the variety of scenarios, technologies, culture and scale is a recurrent challenge required by the software industry. It involves the adaptation of software process models for the reality of their projects. Besides, it must also promote the reuse of past experiences in the definition and development of software processes for the new projects. The adequate management and execution of software processes can bring a better quality and productivity to the produced software systems. This work aimed to explore the use and adaptation of consolidated software product lines techniques to promote the management of the variabilities of software process families. In order to achieve this aim: (i) a systematic literature review is conducted to identify and characterize variability management approaches for software processes; (ii) an annotative approach for the variability management of software process lines is proposed and developed; and finally (iii) empirical studies and a controlled experiment assess and compare the proposed annotative approach against a compositional one. One study a comparative qualitative study analyzed the annotative and compositional approaches from different perspectives, such as: modularity, traceability, error detection, granularity, uniformity, adoption, and systematic variability management. Another study a comparative quantitative study has considered internal attributes of the specification of software process lines, such as modularity, size and complexity. Finally, the last study a controlled experiment evaluated the effort to use and the understandability of the investigated approaches when modeling and evolving specifications of software process lines. The studies bring evidences of several benefits of the annotative approach, and the potential of integration with the compositional approach, to assist the variability management of software process lines

Análise de linguagens de modelagem de processos de um modelo de referência na cadeia de suprimentos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)