Explaining the high number of infected people by dengue in Rio de Janeiro in 2008 using a susceptible-infective-recovered model

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Enhanced multiwavelength holographic profilometry by laser mode selection

A method for improving the accuracy of surface shape measurement by multiwavelength holography is presented. In our holographic setup, a Bi12TiO20 photorefractive crystal was the holographic recording medium, and a multimode diode laser emitting in the red region was the light source in a two-wave mixing scheme. on employing such lasers the resulting holographic image appears covered with interference fringes corresponding to the object relief, and the interferogram spatial frequency is proportional to the diode laser's free spectral range (FSR). Our method consists in increasing the effective free spectral range of the laser by positioning a Fabry-Perot etalon at the laser output for mode selection. As larger effective values of the laser FSR were achieved, higher-spatial-frequency interferograms were obtained and therefore more sensitive and accurate measurements were performed. The quantitative evaluation of the interferograms was made through the phase-stepping technique, and the phase map unwrapping was carried out through the cellular-automata method. For a given surface, shape measurements with different interferogram spatial frequencies were performed and compared with respect to measurement noise and visual inspection. (c) 2007 Society of Photo-Optical Instrumentation Engineers.

Multi-wavelength holographic profilometry - art. no. 60272L

A novel method for surface profilometry by holography is presented. We used a diode laser emitting at many wavelengths simultaneously as the light source and a Bi12TiO20 (BTO) crystal as the holographic medium in single exposure processes. The employ of multi-wavelength, large free spectral range (FSR) lasers leads to holographic images covered of interference fringes corresponding to the contour lines of the studied surface. In order to obtain the relief of the studied surface, the fringe analysis was performed by the phase stepping technique (PST) and the phase unwrapping was carried out by the Cellular-automata method. We analysed the relief of a tilted flat metallic bar and a tooth prosthesis.

Enhanced multi-wavelength holographic profilometry by laser mode selection

The application of multi-wavelength holography for surface shape measurement is presented. In our holographic setup a Bi12TiO 20 (BTO) photorefractive crystal was the holographic recording medium and a multimode diode laser emitting in the red region was the light source in a two-wave mixing scheme. The holographic imaging with multimode lasers results in multiple holograms in the BTO. By employing such lasers the resulting holographic image appears covered of interference fringes corresponding to the object relief and the interferogram spatial frequency is proportional to the diode laser free spectral range (FSR). We used a Fabry-Perot étalon at the laser output for laser mode selection. Thus, larger effective values of the laser FSR were achieved, leading to higher-spatial frequency interferograms and therefore to more sensitive and accurate measurements. The quantitative evaluation of the interferograms was performed through the phase stepping technique (PST) and the phase map unwrapping was carried out through the Cellular-Automata method. For a given surface, shape measurements with different interferogram spatial frequencies were performed and compared, concerning measurement noise and visual inspection.

Modelagem dinâmica espacial aplicada na avaliação das mudanças da cobertura da terra no entorno de dutos utilizando autômatos celulares: estudo de caso duto ORBEL

Pós-graduação em Geociências e Meio Ambiente - IGCE

A expansão urbano-industrial do município de Americana - SP: geotecnologias aplicadas à análise temporal e simulação de cenários

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modelagem espacial dinâmica para o monitoramento do aporte de sedimentos na sub-bacia do Rio Capivara, município de Botucatu - SP

Pós-graduação em Geociências e Meio Ambiente - IGCE

Modelagem dinâmica espacial de mudanças no uso do solo urbano: contribuição metodológica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A mathematical approach to simulate spatio-temporal patterns of an insect-pest, the corn rootworm Diabrotica speciosa (Coleoptera: Chrysomelidae) in intercropping systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Landscape Diversity Influences Dispersal and Establishment of Pest with Complex Nutritional Ecology

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelagem matemática para a dispersão de fungos fitopatogênicos via autômatos celulares

Brazil is a major world producer and exporter of agricultural products like soybeans, sugar, coffee, orange and tobacoo. However, the action of phytopathogenic fungi has been one of the largest challenges encountered in the field as they are responsible for approximately 25 to 50 per cent of losses in crops of fruits and vegetables. The presence of these pathogens is always a problem, because the damage on the tissues and organs promote lesions which decreses growth vegetation and often leads the individual (host) to death. Therefore, it is crucial to understand the process of spreading of these pathogens in the field to develop strategies which prevent the epidemics caused by them. In this study, the dispersal of fungi phytopathogenic in the field was modeled using the automata cellular formalism. The growth rate of infected plants population was measured by the radius of gyration and the influence of host different susceptibility degrees into the disease spread was assessed. The spatial anisotropy related to the plant-to-plant space and the system’s response to distinct seasonal patterns were also evaluated. The results obtained by a mean field model (spatially implicit models) emphasized the importance of the spatial structure on the spreading process, and dispersal patterns obtained by simulation (using a cellular automata) were in agreement with thse observed in data. All computational implementation was held in language Cl

Estudo da dispersão pós-alimentar em larvas de moscas-varejeiras via autômatos celulares

In this paper, a computational analysis, using a cellular automata model, has been developed to analyze post-feeding dispersal behavior of blow y larvae. This model aimed to: simulate the exponential decline of pupal number in relation to the feed source and spatial oscillation due to larval interaction during dispersal; study whether the prior pupal presence in uences distribution patterns of larval frequency; and compare obtained unidirectional dispersal patterns to the cross-dimensional ones. The cellular automata (CA) model was able to successfully reproduce the essential features of the larval dispersal process and, thus, show the importance of local interaction in the studied dispersal process dynamics. Oscillations could be explained by the interaction among dispersing larvae and intrinsic pupation time. The box size and the initial larval density were important factors for the experiment because they in uenced the results. Results showed that the unidirectional dispersal could be used to simulate the larval dispersion that occurs in the natural environment, because both models had a similar result. These results are important to understand how di erent factors can in uence the dynamics of blow y larval dispersal, bringing important results for behavioral ecology and forensic entomology

Modelo discreto para o ciclo eritrocitário da Malária

In this work, some aspects of the erythrocyte cycle of the malaria parasite was incorporated into a cellular automata model to simulated the major factors leading to disruption of the erythrocyte cycle and consequent appearance of gametocytes, which infected the mosquitoes. Furthermore, the time seies of parasitaemia of infected patients was analyzed and compared to simulated data. The results suggested that differences in the temporal patterns of the asexual parasitaemia are associated with different effectiveness of the immune system in controlling the infection

Jogo baseado em simulação de vida artificial

The market of digital games have grown in the last years, becoming popular between many ages, the number of smartphones and tablets users have also showed a recent increase, including the ones using Android as operational system. The main objective of a digital game is the ludic activity but also it can be used as a tool to education, learning and even simulation. This work proposes the development of a game for smartphones or tablet running on Android operational system, this game will simulate living beings in an environment, each one with different behaviors, based in the concepts of artificial live, cellular automata and emergence. This way simulating the behavior of a living being community with a computational base in artificial live and following concepts of game design. The game can represent visually some characteristics of living beings, as well behaviors and interactions between them, in a very simple way. The game can be upgraded in the future to represent better living beings using more details to the simulation of these

The influence of connectivity on the firing rate in a neuronal network with electrical and chemical synapses

We study the firing rate properties of a cellular automaton model for a neuronal network with chemical synapses. We propose a simple mechanism in which the nonlocal connections are included, through electrical and chemical synapses. In the latter case, we introduce a time delay which produces self-sustained activity. Nonlocal connections, or shortcuts, are randomly introduced according to a specified connection probability. There is a range of connection probabilities for which neuron firing occurs, as well as a critical probability for which the firing ceases in the absence of time delay. The critical probability for nonlocal shortcuts depends on the network size according to a power-law. We also compute the firing rate amplification factor by varying both the connection probability and the time delay for different network sizes. (C) 2011 Elsevier B.V. All rights reserved.