Competencia matem??tica en ni??os de 4 a??os

Resumen basado en el de la publicaci??n

Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloy

The Mg-Ni metastable alloys (with amorphous or nanocrystalline structures) are promising candidates for anode application in nickel-metal hydride rechargeable batteries due to its large hydrogen absorbing capacity, low weight, availability, and relative low price. In spite of these interesting features, improvement on the cycle life performance must be achieved to allow its application in commercial products. In the present paper, the effect of mechanical coating of a Mg-50 at.% Ni alloy with Ni and Ni-5 at.% Al on the structure, powder morphology, and electrochemical properties is investigated. The coating additives, Mg-Ni alloy and resulting nanocomposites (i.e., Mg-Ni alloy + additive) were investigated by means of X-ray diffraction and scanning electron microscopy. The Mg-Ni alloy and nanocomposites were submitted to galvanostatic cycles of charge and discharge to evaluate their electrode performances. The mechanical coating with Ni and Ni-5% Al increased the maximum discharge capacity of the Mg-Ni alloy from of 221 to 257 and 273 mA h g(-1), respectively. Improvement on the cycle life performance was also achieved by mechanical coating.

Metalização mecânica de ZrO2 com Ti para brasagem ZrO2/Aço com ligas de adição sem metal ativo

Metal/ceramic interfaces using zirconia have dominated the industrial applications in the last decade, due to the high mechanical strength and fracture toughness of zirconia, especially at temperatures below 300 ºC. Also noteworthy is the good ionic conductivity in high temperatures of this component. In this work joining between ZrO2 Y-TZP and ZrO2 Mg-PSZ with austenitic stainless steel was studied. These joints were brazed at high-vacuum after mechanical metallization with Ti using filler alloys composed by Ag-Cu and Ag-Cu-Ni. The influence of the metallization, and the affinity between the different groups (ceramic / filler alloys) was evaluated, in order to achieve strong metal/ceramic joints. Evaluation of joints and interfaces, also the characterization of base materials was implemented using various techniques, such as: x-ray diffraction, leak test, three-point flexural test and scanning electron microscopy with chemical analysis. The microstructural analysis revealed physical and chemical bonds in the metal/ceramic interfaces, providing superior leak proof joints and stress cracking, in order to a good joint in all brazed samples. Precipitation zones and reaction layers with eutetic characteristics were observed between the steel and the filler metal

Ni una más!. El derecho a vivir una vida libre de violencia en América Latina y el Caribe

Incluye Bibliografía

Colaboración entre grupos de trabajo en el marco del plan de acción eLAC: directrices para la identificación de conceptos, estructuras, métodos e instrumentos

Incluye Bibliografía

Preparação e caracterização de filmes finos Sr1-xMexTiO3(Me=Fe, Ni)

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Efeito do oxigênio intersticial nas propriedades mecânicas e biocompatibilidade da Liga Ti-5Ni

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de tratamentos termo-mecânicos na estrutura e microestrutura da liga Ti-10%pNi obtida por fusão a arco

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Corrosion resistance of Ni-Cr alloys in different mouthwashes

Several alloys have been used for prosthodontics restorations in the last years. These alloys have a number of metals that include gold, palladium, silver, nickel, cobalt, chromium and titanium and they are used in oral cavity undergo several corrosion. Corrosion can lead to poor esthetics, compromise of physical properties, or increased biological irritation. The objective of this study was evaluated corrosion resistance of two alloys Ni-Cr and Ni-Cr-Ti in three types of mouthwashes with different active ingredients: 0.5g/l cetylpyridinium chloride + 0.05% sodium fluoride, 0.05% sodium fluoride + 0.03% triclosan (with fluor) and 0.12% chlorohexidine digluconate. The potentiodynamic curves were performed by means of an EG&G PAR 283 potentiostat/galvanostat. The counter electrode was a platinum wire and reference electrode was an Ag/AgCl, KCl saturated. Before each experiment, working electrodes were mechanically polished with 600 and 1200 grade papers, rinsed with distilled water and dried in air. All experiments were carried out at 37.0oC in conventional three-compartment double wall glass cell containing mouthwashes. The microstructures of two alloys were observed in optical microscopy. Analysis of curves showed that Ni-Cr alloy was less reactive in the presence of 0.12% chlorohexidine digluconate while Ni-Cr-Ti alloy was more sensitive for others two types of mouthwashes (0.5g/l cetylpyridinium chloride + 0.05% sodium fluoride  and 0.05% sodium fluoride + 0.03% triclosan). This occurred probably due presence of titanium in this alloy. Microstructural analysis reveals the presence of dendritic and eutectic microstructures for NiCr and Ni-Cr-Ti, respectively.

Concentrations of Fe, Mn, Cu, Zn, Co, Ni, Pb, Cd, B, and SiO2 in interstitial waters from bottom sediments of the Atlantis II and Discovery Deeps, Red Sea rift zone

Chemical analyzes show that interstitial waters from ore-bearing bottom sediments of the Atlantis II and Discovery Deeps are enriched in Fe, Mn, Cu, Ni, Co, Zn, Pb, and Cd compared to sea water. Enrichment factors of these trace elements in the interstitial waters of the Atlantis II Deep relative to the sea water vary within the following ranges: for Fe from 100 to 7000, for Mn from 19047 to 32738, for Zn from 500 to 1600, for Pb from 78333 to 190000, for Cu from 107 to 654. Comparison of average weighted concentrations of Fe, Mn, Zn, Pb, Cu, Ni in the bottom sediments and the interstitial waters of the Atlantis II Deep indicates common regularities and good relationship in distribution of these elements along sediment cores. Differences in concentrations and distribution of the studied trace elements in the interstitial waters of the Atlantis II and Discovery Deeps result from different chemical compositions of hydrothermal fluids entering these deeps.

Propuesta de una metodología para provisión de servicios de outsourcing de TI

El mercado de outsourcing ha estado creciendo en los últimos años y se prevé que lo siga haciendo en los próximos, pero este crecimiento ha estado limitado por el fracaso de muchos proyectos que, en algunos casos, han llevado a las organizaciones a asumir de nuevo esos servicios (insourcing). Estos fracasos se han debido en gran parte a los problemas con los proveedores: falta de experiencia, de capacidades para asumir los proyectos, dificultad en la comunicación,… A diferencia de lo que ocurre en otras disciplinas, no existe una metodología que ayude, tanto a los clientes como a los proveedores de servicios de outsourcing de TI, a gobernar y gestionar sus proyectos y conseguir los resultados buscados. En los últimos años han aparecido, al mismo tiempo que la expansión del outsourcing, algunos modelos y marcos de buenas prácticas para la gestión de los proyectos de outsourcing, pero generalmente sólo cubren algunos aspectos de la gestión. No se los puede considerar metodologías, porque no definen roles, responsabilidades ni entregables. Por lo general, son el resultado de la experiencia en la gestión de otros tipos de proyectos. Hay que considerar también que, excepto eSCM-SP, que es un modelo de buenas prácticas para mejorar la capacidad en la provisión de servicios, están todos orientados al cliente. El objetivo de esta tesis es, por un lado, demostrar la necesidad de contar con una metodología que guíe a los proveedores durante todo el ciclo de vida un proyecto de outsourcing y, por otro, proponer una metodología que contemple desde la fase inicial de la búsqueda de oportunidades de negocio, evaluación de las propuestas RFP, la decisión de hacer una oferta o no para la prestación de servicios, la participación en la due diligence, la firma del contrato, la transición y la entrega de servicios, hasta la finalización del contrato. La metodología se ha organizado en base a un ciclo de vida del outsourcing de cinco etapas, definiendo para cada una de ellas los roles que participan y las responsabilidades que deberán asumir, las actividades a realizar y los entregables que se deberán generar, y que servirán de elementos de control tanto para la gestión del proyecto como para la provisión del servicio. La validación de la metodología se ha realizado aplicándola en proyectos de provisión de servicios de TI de una mediana empresa española y comparando los resultados obtenidos con los conseguidos en proyectos anteriores. ABSTRACT The outsourcing market has been growing in recent years and it is expected to keep doing so in the coming years, but this growth has been limited by the failure of many projects that, in some cases, has led organizations to take back those services (insourcing). These failures have been due to a major degree to problems with providers: lack of experience and capacity to take on the projects, and difficulties of communication. Unlike what happens in other disciplines, there is no methodology for helping both customers and providers of outsourcing services. In recent years, some good practice frameworks have also appeared at the same time as the expansion of outsourcing. They are not methodologies because they have not defined any roles, responsibilities and deliverables. These frameworks aim to help organizations to be successful at managing and governing outsourcing projects. They are usually the result of their experience in managing other kinds of projects. In consequence, it is not appropriate to name them "methodologies" for managing outsourcing projects and much less "standards". It is also important to note that all existing good practice frameworks, except eSCM-SP, are client-oriented. The aim of this thesis is to state the need to propose a methodology that guides providers throughout the whole outsourcing life cycle and facilitates the provision of quality services and their management, and the proposal of a methodology in which the stages, activities, deliverables, roles and responsibilities are clearly defined. The proposed methodology cover all the stages of the outsourcing life cycle, from the early stage of searching for business opportunities, evaluation of the RFP proposals, the decision to bid or not to bid for the service provision, participation in the due diligence if necessary, the signing of the contract, the transition and delivery of service to the termination of the contract. For each activity, roles, responsibilities and deliverables have been defined. The validation of the methodology has been done by applying it in the provision of some outsourcing projects carried out by a Spanish IT medium company and comparing the results with those obtained in previous projects.

Ti/Pd/Ag Contacts to n-Type GaAs for High Current Density Devices

The metallization stack Ti/Pd/Ag on n-type Si has been readily used in solar cells due to its low metal/semiconductor specific contact resistance, very high sheet conductance, bondability, long-term durability, and cost-effectiveness. In this study, the use of Ti/Pd/Ag metallization on n-type GaAs is examined, targeting electronic devices that need to handle high current densities and with grid-like contacts with limited surface coverage (i.e., solar cells, lasers, or light emitting diodes). Ti/Pd/Ag (50 nm/50 nm/1000 nm) metal layers were deposited on n-type GaAs by electron beam evaporation and the contact quality was assessed for different doping levels (from 1.3 × 1018 cm−3 to 1.6 × 1019 cm−3) and annealing temperatures (from 300°C to 750°C). The metal/semiconductor specific contact resistance, metal resistivity, and the morphology of the contacts were studied. The results show that samples doped in the range of 1018 cm−3 had Schottky-like I–V characteristics and only samples doped 1.6 × 1019 cm−3 exhibited ohmic behavior even before annealing. For the ohmic contacts, increasing annealing temperature causes a decrease in the specific contact resistance (ρ c,Ti/Pd/Ag ~ 5 × 10−4 Ω cm2). In regard to the metal resistivity, Ti/Pd/Ag metallization presents a very good metal conductivity for samples treated below 500°C (ρ M,Ti/Pd/Ag ~ 2.3 × 10−6 Ω cm); however, for samples treated at 750°C, metal resistivity is strongly degraded due to morphological degradation and contamination in the silver overlayer. As compared to the classic AuGe/Ni/Au metal system, the Ti/Pd/Ag system shows higher metal/semiconductor specific contact resistance and one order of magnitude lower metal resistivity.

Prevalência e etiologia dos retratamentos endodônticos realizados na clínica dentária Egas Moniz: estudo retrospetivo

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz