Efeitos da alimentação artificial protéica em colônias de uruçu-cinzenta (Melípona fasciculata, Smith 1858) (Apidae, Meliponini) e adaptação em casa-de-vegetaçao

O trabalho teve como objetivo desenvolver uma alimentação artificial protéica a base de extrato de soja (saburá artificial), e avaliar o seu efeito sobre a razão sexual, longevidade de operárias e desenvolvimento de colônias recém-divididas de Melipona fasciculata além de verificar a adaptação da espécie dentro de casas de vegetação. O saburá artificial aqui desenvolvido é constituído de 50g de extrato de soja, 20g de saburá fresco e 60ml de xarope de açúcar invertido (60%). Foi utilizado anilina para colorir o saburá artificial na tentativa de rastrear e verificar o consumo pelas operárias dentro das colônias. Foram utilizadas cinco colônias, das quais três receberam somente saburá e duas o saburá artificial. Não houve diferença significativa entre a produção de rainhas e operárias nos dois tratamentos e nos dois casos não houve produção de machos. As operárias que nasceram de caixas alimentadas com saburá artificial apresentaram maior longevidade e menor peso ao nascer. Estas caixas ainda iniciaram o processo de construção de células e postura mais cedo que as caixas alimentadas com saburá, contudo, suas rainhas apresentaram menor taxa de oviposição diária. O alimento a base de extrato de soja (saburá artificial) não afetou negativamente colônias recém divididas de M. fasciculata. Nos primeiros dias, as abelhas passaram a maior parte do seu tempo no topo da casa-de-vegetação tentando fugir, somente após o terceiro dia houve redução na mortalidade das operárias. Não houve diferença significativa, ao longo de cinco dias, entre a mortalidade de operárias em caixas transferidas, durante a noite e durante o dia, para dentro da casa-de-vegetação. A anilina se mostrou uma excelente ferramenta para controlar os alimentos manuseados e consumidos pela colônia.

Características florais e dependência por polinizadores de cinco cultivares de pepino e manejo de colméias em estufas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cultivo e controle de insetos do tomateiro em diferentes ambientes

Pós-graduação em Agronomia - FEIS

Levantamento e manejo de nematoides fitoparasitas em áreas cultivadas com olerícolas na região Centro-Oeste do Estado de São Paulo

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

First report of Bemisia tabaci Mediterranean (Q biotype) species in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de uma rede de sensores sem fio aplicada no monitoramento da variabilidade térmica em casas de vegetação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Development of technologies and methods for monitoring the spatial variability of air temperature in greenhouse environment

Climatic factors directly influence growth and productivity of plants inside greenhouses, where temperature can be considered one of the major parameter in this context. Thus, the aim of this research was to develop a low cost device for thermal sensing and data acquisition, and use it in data collection and analysis of spatial variability of temperature inside a greenhouse with tropical climate. The developed equipment for thermal measurements showed a high degree of accuracy and fast responses in measurements, proving its efficiency. The data analysis interpretations were made from the elaborations of variograms and of tridimensional maps generated by a geostatistical software. The processed data analysis presented that a greenhouse without thermal control has spatial variations of air temperature, both in the sampled horizontals layers as in the three analyzed vertical columns, presenting variations of up to 3.6 ºC in certain times.

Moisture content and its influence on the roughness and noise emission during wood machining

Numerous factors influencing the surface quality of wood after machining, among them we highlight the machining parameters and the properties of the wood. In the analysis of the influence of these factors on machining and in determining the quality measurement systems are used to obtain surface characteristics, these systems are divided into methods of contact and non-contact. The method for mechanical contact performed with the aid of the surface roughness tester is the most valued in the measurement of roughness of wood, however, aiming at a greater agility in these measurements, there is a need to seek alternatives for evaluation of surface quality, and one of these options is to use the forms of indirect measurements of this quality, as for example, the use of noise emission during the machining process. With this, the aim was to analyze the influence of the moisture content of the wood, at different levels, on surface quality of the species Pinus elliottii, determined by the method of mechanical probing move and relate this roughness with the sound emission issued for each class of humidity, during machining. The planning of experiments and statistical analyses were performed with the help of Taguchi method. The specimens were conditioned in greenhouses climatizadoras automatics for obtaining three classes of humidity. Machining tests of wooden pieces were performed on a machining center specific for this type of material. The roughness values were measured by a roughness verifier and the noise emission values were measured by for a measurer sound pressure level. Statistically significant differences were observed, the significance level of 10 %, on roughness and noise emission between the three levels of moisture. It was observed that with the increase in the moisture content occurred an increase of roughness and a reduction in noise emission. Monitoring of surface quality through noise level is an interesting alternative to the method of mechanical contact.

Processo de produção de composto orgânico derivado de resíduos industriais com aplicação no cultivo de alface

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimativa da radiação solar global em estufa de polietileno a partir do brilho solar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of simple hardware efficiency for temperature measurement in agriculture and environment

This work focuses basically on the design and analysis of simple and low cost hardware systems efficiency for temperature measurement in agricultural area. The main objective is to prove quantitatively, through statistical data analysis, to what extent a simple hardware designed with inexpensive components can be used safely in the indoor temperature measurement in farm buildings, such as greenhouses, warehouse or silos. To verify the of simple hardware efficiency, its data were compared with data from measurements with a high performance LabVIEW platform. This work proved that a simple hardware based on a microcontroller and the LM35 sensor can perform well. It presented a good accuracy but a relatively low precision that can be improved when performed some consecutive signal sampling and then used its average value. Although there are many papers that explain these components, this work has the distinction of presenting a data analysis in numerical form and using high performance systems to ensure critical data comparison.

Fisiologia e bioquímica do tomateiro submetido à irrigação salina parcial do sistema radicular

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Território usado e recursos hídricos: o uso da água na produção de flores e plantas ornamentais em Holambra-SP

Pós-graduação em Geografia - IGCE

Elaboración de un mapa de lixiviación de nitratos mediante una metodología de acople SIG-modelo de simulación : aplicación al acuífero de La Aldea (Gran Canaria)

[ES] La contaminación difusa por nitrato constituye una de las mayores amenazas actuales para la calidad de las aguas subterráneas. De hecho, varias directivas europeas, nacionales y regionales se han legislado con el fin de minimizar el efecto de las prácticas agrarias en la contaminación de los acuíferos por nitratos. El acuífero de La Aldea (Gran Canaria, España) se ha declarado como vulnerable a la contaminación por nitrato según dichas normas. En este estudio se presenta una metodología para desarrollar el acople de un sistema de información geográfica-SIG con el modelo de simulación de nitrato GLEAMS. Esta herramienta permite calcular la cantidad de nitrato lixiviado procedente de los cultivos de tomate bajo invernadero y da la oportunidad de simular otros rangos de fertilización para minimizar el riesgo de contaminación de las aguas subterráneas. Se comprueba que la pérdida de nitrato por lixiviación en la zona a partir de dichos cultivos podía llegar a los 500 kg N/ha, casi un 62% del aportado como fertilizante mineral en un manejo tradicional. Por ello, se aconseja la aplicación de las recomendaciones de abonado incluidas en el código de buenas prácticas agrarias de Canarias o cualquier otro sistema de recomendación de abonado mineral para reducir estas pérdidas, minimizando de esta forma el riesgo de contaminación de las aguas subterráneas. ABSTRACT: Nitrate diffuse pollution is one of the main risks that affect the groundwater quality. Several european directives, national and regional guidelines have been enacted to protect the aquifers against the effect of the agricultural management practices. The “La Aldea” aquifer was declared nitrate vulnerable area following these laws. In this study a methodology was developed to link a Geographical Information System (GIS) with a nitrogen simulation model (GLEAMS) in this area. This tool allows to assess the amount of nitrate leaching that coming from the traditional nitrogen fertilization rates in greenhouses tomato crops, and gives the opportunity to simulate other fertilization rates to reduce the risk of groundwater pollution. The nitrate leaching reached to 500 kg N/ha in several zones of the study area, that represent the 62% of the nitrogen fertiliser apply in a traditional management. It was recommended the application of the Code of Good Management Practices or other recommendation system to decrease the nitrate leaching, in order to reduce the risk of groundwater pollution.

Nuove tecniche per l'allevamento massale di Ditteri del genere Coenosia Meigen

The species of the genus Coenosia Meigen are polyphagous predators both in the larval and in the adult stage. In Europe five Coenosia species of the ‘tigrina group’ are naturally present in greenhouses, where they can establish for long periods. As their wide preys range includes important pests of protected crops, as Aleyrodidae, Sciaridae and Agromyzidae, Coenosia species are considered promising potential biological control agents. A method for rearing Coenosia species in vivo was developed for the first time in 1993 in Germany, where C. attenuata, C. strigipes and C. humilis were bred on Bradysia paupera (Diptera Sciaridae), reared on Fusarium spp. cultivated on wood fibre. Although this method was partially simplified afterwards, it is still too complex and expensive for a mass production. This research aimed at simplifying this rearing procedure and making it cheaper, in the perspective of an eventual mass production. Studies on potential preys were conducted, to determine their suitability for C. attenuata larvae and adults and to develop rearing methods. Biology and rearing methods of Bradysia paupera Tuomikoski, Scatella stagnalis Fallén and Drosophila melanogaster Meigen (Diptera: Sciaridae, Ephydridae, Drosophilidae) were compared. B. paupera resulted the most suitable prey for rearing C. attenuata in vivo. The Sciarid fly was effectively reared on damp coconut fibre with fresh Agaricus bisporus (J.E. Lange) Pilát, thus simplifying the existing method. After preliminary trials with different potential preys, attempts to rear C. attenuata in vivo on B. paupera and D. melanogaster were made. The best results were obtained with B. paupera, reared on coconut fibre and A. bisporus, but the method needs further improvement. Trials of in vitro rearing of C. attenuata were also made: as no specific diet for Coenosia species is reported in literature, different potentially suitable media were tested. Among these, a specific diet for Diptera Tachinidae resulted a good starting point for further studies and improvements. The biology of C. attenuata adults captured in greenhouses was also studied, by observing both groups and isolated individuals. Data on lifespan, daily number of preys per adult, daily number of laid eggs and hatching rate were recorded, and the effects of different foods on these parameters were analyzed. The following foods were compared: D. melanogaster adults only, as preys for C. attenuata; D. melanogaster adults and a water-honey solution; the water-honey solution only. Honey resulted an effective food integration for C. attenuata, increasing lifespan and the number of egg laying females. It is possible that in greenhouses Coenosia adults complete the preys diet with nectar and/or honeydew. Moreover, the integration with honey reduced the daily preys consumption. This may allow to prevent cannibalism among Coenosia adults in the rearing conditions, where high population densities are required. A survey of the Coenosia species naturally present in Lombardy greenhouses was conducted. The species C. attenuata, C. strigipes, C. tigrina and C. atra were detected. C. attenuata resulted the most common, recorded in most greenhouses and for consecutive years. Besides, the presence of potential preys, weeds and the crops were recorded in each greenhouse. Nevertheless, it is difficult to determine the relation between these parameters and the presence of Coenosia species.