Desenvolvimento de uma rede de sensores sem fio aplicada no monitoramento da variabilidade térmica em casas de vegetação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Development of technologies and methods for monitoring the spatial variability of air temperature in greenhouse environment

Climatic factors directly influence growth and productivity of plants inside greenhouses, where temperature can be considered one of the major parameter in this context. Thus, the aim of this research was to develop a low cost device for thermal sensing and data acquisition, and use it in data collection and analysis of spatial variability of temperature inside a greenhouse with tropical climate. The developed equipment for thermal measurements showed a high degree of accuracy and fast responses in measurements, proving its efficiency. The data analysis interpretations were made from the elaborations of variograms and of tridimensional maps generated by a geostatistical software. The processed data analysis presented that a greenhouse without thermal control has spatial variations of air temperature, both in the sampled horizontals layers as in the three analyzed vertical columns, presenting variations of up to 3.6 ºC in certain times.

Moisture content and its influence on the roughness and noise emission during wood machining

Numerous factors influencing the surface quality of wood after machining, among them we highlight the machining parameters and the properties of the wood. In the analysis of the influence of these factors on machining and in determining the quality measurement systems are used to obtain surface characteristics, these systems are divided into methods of contact and non-contact. The method for mechanical contact performed with the aid of the surface roughness tester is the most valued in the measurement of roughness of wood, however, aiming at a greater agility in these measurements, there is a need to seek alternatives for evaluation of surface quality, and one of these options is to use the forms of indirect measurements of this quality, as for example, the use of noise emission during the machining process. With this, the aim was to analyze the influence of the moisture content of the wood, at different levels, on surface quality of the species Pinus elliottii, determined by the method of mechanical probing move and relate this roughness with the sound emission issued for each class of humidity, during machining. The planning of experiments and statistical analyses were performed with the help of Taguchi method. The specimens were conditioned in greenhouses climatizadoras automatics for obtaining three classes of humidity. Machining tests of wooden pieces were performed on a machining center specific for this type of material. The roughness values were measured by a roughness verifier and the noise emission values were measured by for a measurer sound pressure level. Statistically significant differences were observed, the significance level of 10 %, on roughness and noise emission between the three levels of moisture. It was observed that with the increase in the moisture content occurred an increase of roughness and a reduction in noise emission. Monitoring of surface quality through noise level is an interesting alternative to the method of mechanical contact.

Processo de produção de composto orgânico derivado de resíduos industriais com aplicação no cultivo de alface

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimativa da radiação solar global em estufa de polietileno a partir do brilho solar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of simple hardware efficiency for temperature measurement in agriculture and environment

This work focuses basically on the design and analysis of simple and low cost hardware systems efficiency for temperature measurement in agricultural area. The main objective is to prove quantitatively, through statistical data analysis, to what extent a simple hardware designed with inexpensive components can be used safely in the indoor temperature measurement in farm buildings, such as greenhouses, warehouse or silos. To verify the of simple hardware efficiency, its data were compared with data from measurements with a high performance LabVIEW platform. This work proved that a simple hardware based on a microcontroller and the LM35 sensor can perform well. It presented a good accuracy but a relatively low precision that can be improved when performed some consecutive signal sampling and then used its average value. Although there are many papers that explain these components, this work has the distinction of presenting a data analysis in numerical form and using high performance systems to ensure critical data comparison.

Fisiologia e bioquímica do tomateiro submetido à irrigação salina parcial do sistema radicular

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Território usado e recursos hídricos: o uso da água na produção de flores e plantas ornamentais em Holambra-SP

Pós-graduação em Geografia - IGCE

Elaboración de un mapa de lixiviación de nitratos mediante una metodología de acople SIG-modelo de simulación : aplicación al acuífero de La Aldea (Gran Canaria)

[ES] La contaminación difusa por nitrato constituye una de las mayores amenazas actuales para la calidad de las aguas subterráneas. De hecho, varias directivas europeas, nacionales y regionales se han legislado con el fin de minimizar el efecto de las prácticas agrarias en la contaminación de los acuíferos por nitratos. El acuífero de La Aldea (Gran Canaria, España) se ha declarado como vulnerable a la contaminación por nitrato según dichas normas. En este estudio se presenta una metodología para desarrollar el acople de un sistema de información geográfica-SIG con el modelo de simulación de nitrato GLEAMS. Esta herramienta permite calcular la cantidad de nitrato lixiviado procedente de los cultivos de tomate bajo invernadero y da la oportunidad de simular otros rangos de fertilización para minimizar el riesgo de contaminación de las aguas subterráneas. Se comprueba que la pérdida de nitrato por lixiviación en la zona a partir de dichos cultivos podía llegar a los 500 kg N/ha, casi un 62% del aportado como fertilizante mineral en un manejo tradicional. Por ello, se aconseja la aplicación de las recomendaciones de abonado incluidas en el código de buenas prácticas agrarias de Canarias o cualquier otro sistema de recomendación de abonado mineral para reducir estas pérdidas, minimizando de esta forma el riesgo de contaminación de las aguas subterráneas. ABSTRACT: Nitrate diffuse pollution is one of the main risks that affect the groundwater quality. Several european directives, national and regional guidelines have been enacted to protect the aquifers against the effect of the agricultural management practices. The “La Aldea” aquifer was declared nitrate vulnerable area following these laws. In this study a methodology was developed to link a Geographical Information System (GIS) with a nitrogen simulation model (GLEAMS) in this area. This tool allows to assess the amount of nitrate leaching that coming from the traditional nitrogen fertilization rates in greenhouses tomato crops, and gives the opportunity to simulate other fertilization rates to reduce the risk of groundwater pollution. The nitrate leaching reached to 500 kg N/ha in several zones of the study area, that represent the 62% of the nitrogen fertiliser apply in a traditional management. It was recommended the application of the Code of Good Management Practices or other recommendation system to decrease the nitrate leaching, in order to reduce the risk of groundwater pollution.

Nuove tecniche per l'allevamento massale di Ditteri del genere Coenosia Meigen

The species of the genus Coenosia Meigen are polyphagous predators both in the larval and in the adult stage. In Europe five Coenosia species of the ‘tigrina group’ are naturally present in greenhouses, where they can establish for long periods. As their wide preys range includes important pests of protected crops, as Aleyrodidae, Sciaridae and Agromyzidae, Coenosia species are considered promising potential biological control agents. A method for rearing Coenosia species in vivo was developed for the first time in 1993 in Germany, where C. attenuata, C. strigipes and C. humilis were bred on Bradysia paupera (Diptera Sciaridae), reared on Fusarium spp. cultivated on wood fibre. Although this method was partially simplified afterwards, it is still too complex and expensive for a mass production. This research aimed at simplifying this rearing procedure and making it cheaper, in the perspective of an eventual mass production. Studies on potential preys were conducted, to determine their suitability for C. attenuata larvae and adults and to develop rearing methods. Biology and rearing methods of Bradysia paupera Tuomikoski, Scatella stagnalis Fallén and Drosophila melanogaster Meigen (Diptera: Sciaridae, Ephydridae, Drosophilidae) were compared. B. paupera resulted the most suitable prey for rearing C. attenuata in vivo. The Sciarid fly was effectively reared on damp coconut fibre with fresh Agaricus bisporus (J.E. Lange) Pilát, thus simplifying the existing method. After preliminary trials with different potential preys, attempts to rear C. attenuata in vivo on B. paupera and D. melanogaster were made. The best results were obtained with B. paupera, reared on coconut fibre and A. bisporus, but the method needs further improvement. Trials of in vitro rearing of C. attenuata were also made: as no specific diet for Coenosia species is reported in literature, different potentially suitable media were tested. Among these, a specific diet for Diptera Tachinidae resulted a good starting point for further studies and improvements. The biology of C. attenuata adults captured in greenhouses was also studied, by observing both groups and isolated individuals. Data on lifespan, daily number of preys per adult, daily number of laid eggs and hatching rate were recorded, and the effects of different foods on these parameters were analyzed. The following foods were compared: D. melanogaster adults only, as preys for C. attenuata; D. melanogaster adults and a water-honey solution; the water-honey solution only. Honey resulted an effective food integration for C. attenuata, increasing lifespan and the number of egg laying females. It is possible that in greenhouses Coenosia adults complete the preys diet with nectar and/or honeydew. Moreover, the integration with honey reduced the daily preys consumption. This may allow to prevent cannibalism among Coenosia adults in the rearing conditions, where high population densities are required. A survey of the Coenosia species naturally present in Lombardy greenhouses was conducted. The species C. attenuata, C. strigipes, C. tigrina and C. atra were detected. C. attenuata resulted the most common, recorded in most greenhouses and for consecutive years. Besides, the presence of potential preys, weeds and the crops were recorded in each greenhouse. Nevertheless, it is difficult to determine the relation between these parameters and the presence of Coenosia species.

Estimation of the risks of thermal stress due to the microclimate for manual fruit and vegetable harvesters in central Italy

Agricultural workers are exposed to various risks, including chemical agents, noise, and many other factors. One of the most characteristic and least known risk factors is constituted by the microclimatic conditions in the different phases of work (in field, in greenhouse, etc). A typical condition is thermal stress due to high temperatures during harvesting operations in open fields or in greenhouses. In Italy, harvesting is carried out for many hours during the day, mainly in the summer, with temperatures often higher than 30 degrees C. According to ISO 7243, these conditions can be considered dangerous for workers' health. The aim of this study is to assess the risks of exposure to microclimatic conditions (heat) for fruit and vegetable harvesters in central Italy by applying methods established by international standards. In order to estimate the risk for workers, the air temperature, radiative temperature, and air speed were measured using instruments in conformity with ISO 7726. Thermodynamic parameters and two more subjective parameters, clothing and the metabolic heat production rate related to the worker's physical activity, were used to calculate the predicted heat strain (PHS) for the exposed workers in conformity with ISO 7933. Environmental and subjective parameters were also measured for greenhouse workers, according to ISO 7243, in order to calculate the wet-bulb globe temperature (WBGT). The results show a slight risk for workers during manual harvesting in the field. On the other hand, the data collected in the greenhouses show that the risk for workers must not be underestimated. The results of the study show that, for manual harvesting work in climates similar to central Italy, it is essential to provide plenty of drinking water and acclimatization for the workers in order to reduce health risks. Moreover, the study emphasizes that the possible health risks for greenhouse workers increase from the month of April through July.

Evaluation of soil salinity amelioration technologies in Timpaki, Crete

Salinization is a soil threat that adversely affects ecosystem services and diminishes soil functions in many arid and semi-arid regions. Soil salinity management depends on a range of factors, and can be complex expensive and time demanding. Besides taking no action, possible management strategies include amelioration and adaptation measures. The WOCAT Technologies Questionnaire is a standardized methodology for monitoring, evaluating and documenting sustainable land management practices through interaction with the stakeholders. Here we use WOCAT for the systematic analysis and evaluation of soil salinization amelioration measures, for the RECARE project Case Study in Greece, the Timpaki basin, a semi-arid region in south-central Crete where the main land use is horticulture in greenhouses irrigated by groundwater. Excessive groundwater abstractions have resulted in a drop of the groundwater level in the coastal part of the aquifer, thus leading to seawater intrusion and in turn to soil salinization due to irrigation with brackish water. Amelioration technologies that have already been applied in the case study by the stakeholders are examined and classified depending on the function they promote and/or improve. The documented technologies are evaluated for their impacts on ecosystem services, cost and input requirements. Preliminary results show that technologies which promote maintaining existing crop types while enhancing productivity and decreasing soil salinity such as composting, mulching, rain water harvesting and seed biopriming are preferred by the stakeholders. Further work will include result validation using qualitative approaches.

Evaluation of promising technologies for soil salinity amelioration in Timpaki (Crete): A participatory approach

Soil salinity management can be complex, expensive, and time demanding, especially in arid and semi-arid regions. Besides taking no action, possible management strategies include amelioration and adaptation measures. Here we apply the World Overview of Conservation Approaches and Technologies (WOCAT) framework for the systematic analysis and evaluation and selection of soil salinisation amelioration technologies in close collaboration with stakeholders. The participatory approach is applied in the RECARE (Preventing and Remediating degradation of soils in Europe through Land Care) project case study of Timpaki, a semiarid region in south-central Crete (Greece) where the main land use is horticulture in greenhouses irrigated by groundwater. Excessive groundwater abstractions have resulted in a drop of the groundwater level in the coastal part of the aquifer, thus leading to seawater intrusion and in turn to soil salinisation. The documented technologies are evaluated for their impacts on ecosystem services, cost, and input requirements using a participatory approach and field evaluations. Results show that technologies which promote maintaining existing crop types while enhancing productivity and decreasing soil salinity are preferred by the stakeholders. The evaluation concludes that rainwater harvesting is the optimal solution for direct soil salinity mitigation, as it addresses a wider range of ecosystem and human well-being benefits. Nevertheless, this merit is offset by poor financial motivation making agronomic measures more attractive to users.

Transformaciones en tecnología hortícola : Mar del Plata, Argentina

A partir de 1990 la adopción de los invernáculos, así como la irrupción y crecimiento de la gran distribución (GD) generaron cambios en la estructura comercial y productiva del cinturón hortícola de Mar del Plata (Argentina). Para analizar las transformaciones más significativas se efectuó un estudio de caso considerando las innovaciones introducidas por 11 agricultores en diversos aspectos. Se enfatizaron los cultivos de tomate y pimiento porque acompañaron la expansión de la producción bajo cubierta y los de lechuga, tanto por su importancia a campo como por continuar la rotación de los dos anteriores dentro del invernáculo. Los productores más relacionados establemente con la GD planifican en función de la demanda. En cambio, los todavía vinculados con la comercialización tradicional tienden a diversificar su producción realizando las ventas en un puesto propio del mercado mayorista local o a acopiadores de otras zonas. Ambos grupos no sólo han buscado alternativas de mayor rentabilidad a través de la vía comercial; también las han aplicado en la organización del trabajo y las tecnologías utilizadas.

Factores que influyen en la adopción de tecnologías de conservación de suelos en el secano interior de Chile Central

El desarrollo de sistemas agrícolas sustentables es un desafío en el contexto de políticas e incentivos tendientes a la conservación de los recursos naturales, especialmente en zonas de secano. El presente estudio examina variables demográficas y productivas que influyen en la adopción de tecnologías de conservación de suelos en 90 pequeños productores del secano interior de Chile Central, en las comunas de Pencahue y Curepto. Se utilizó un modelo de regresión Probit, el cual asocia la adopción de las tecnologías con las variables: edad del agricultor, tamaño familiar, superficie predial y forma de tenencia de la tierra; presencia de: plantaciones forestales, invernaderos, aboneras, animales mayores en el predio; experiencia en comercialización del productor y participación en actividades de capacitación. El modelo seleccionado tiene un alto poder de predicción, llegando a clasificar correctamente un 92,2% de las observaciones. Los resultados econométricos muestran que la participación en actividades de extensión, la superficie predial, la presencia de plantaciones forestales y el uso de aboneras, influyen de manera positiva y significativa sobre la adopción de tecnologías conservacionistas. Resulta relevante el impacto de la capacitación sobre la adopción de tecnologías de alto grado de inversión, así como la incorporación de prácticas de conservación de bajo nivel de inversión como las aboneras.