Caracterização geológica e geotécnica dos complexos vulcânicos antigo e intermédio da Ilha da Madeira

Este trabalho pretende contribuir para aprofundar o conhecimento geológico e geotécnico das formações vulcânicas da ilha da Madeira. Por razões de ordem técnica, apenas foi possível proceder à caracterização geológica e geotécnica de três dos cinco afloramentos, inicialmente previstos. As amostras estudadas pertencem aos Complexos Vulcânicos Antigo e Intermédio, definidos pela nova vulcano-estratigrafia da ilha da Madeira, cuja carta geológica se encontra em fase de publicação. Foca-se, inicialmente, a ilha da Madeira, enquadrando-a no espaço e no tempo geológico e apresentando a sua vulcano-estratigrafia. Seguem-se os estudos geológicos e geotécnicos, indispensáveis, para caracterizar as amostras escolhidas. Neste capítulo e numa primeira fase, é efectuada uma caracterização geológica das amostras em estudo, sendo, seguidamente, abordado o acompanhamento realizado durante a execução dos ensaios realizados in situ e em laboratório, bem como, os resultados obtidos, segundo as normas em vigor, com vista a caracterizar geotecnicamente as amostras escolhidas. Na fase de discussão, faz-se uma análise aos resultados obtidos das caracterizações geológicas e geotécnicas, procurando relações existentes e comparando-as a outras já existentes na ilha da Madeira e no arquipélago das Canárias. Por fim apresenta-se a caracterização geológica e geotécnica das três amostras. A ter em consideração que o presente trabalho, representa apenas um pequeno contributo, pretendendo acrescentar os resultados obtidos a alguns já existentes e a outros que advirão, tendo em conta que a este nível existe pouca informação relativa a arquipélago da Madeira.

Contributo para a caracterização geológica e geotécnica dos diferentes complexos vulcânicos da Ilha da Madeira

Este trabalho permite oferecer uma contribuição para a caracterização geológica-geotécnica dos três complexos vulcânicos da ilha da Madeira, através de sete amostras de material geológico, pertencentes a quatro das sete unidades vulcano-estratigráficas presentes na ilha. São estudados materiais da Unidade do Porto da Cruz (CVI 1), da Unidade da Encumeada (CVM 1), da Unidade dos Lombos (CVS 1) e da Unidade do Funchal (CVS 2), correspondendo a rochas vulcânicas muito alteradas, solos sedimentares, tufos, basaltos e mugearitos, respectivamente. No âmbito da caracterização geológica, é efectuada uma classificação litológica do material amostrado. Também é realizado um estudo das descontinuidades dos maciços onde se efectuaram as amostragens, em função dos parâmetros atitude, espaçamento, abertura, rugosidade, preenchimento, extensão e n.º de famílias de descontinuidades. No âmbito da caracterização geotécnica, é realizada uma campanha de ensaios laboratoriais aos materiais rochosos e terrosos, de forma a determinar uma série de parâmetros geotécnicos. Os ensaios realizados para as amostras de solo são: análise granulométrica; determinação do teor em água; determinação do teor em cinzas e matéria orgânica; determinação da densidade das partículas; determinação do equivalente de areia; e determinação dos limites de consistência (limites de Atterberg). Para as amostras de rochas, são efectuados ensaios para a determinação dos seguintes parâmetros: absorção de água à pressão atmosférica; massa volúmica aparente seca; resistência à compressão uniaxial; módulo de deformabilidade; e resistência à compressão deduzida através da dureza de ressalto de Schmidt. Após a caracterização geológica-geotécnica dos materiais amostrados, é efectuada uma análise de resultados, bem como uma comparação com resultados de outras referências bibliográficas. Este trabalho é um contributo para um banco de dados geológicos e geotécnicos sobre os complexos vulcânicos da ilha da Madeira, deixando em aberto a continuidade de estudos nesta temática.

Otimização do processo de síntese do aluminato de cobalto via método de polimerização de complexos (MPC) através do planejamento fatorial fracionado

In the ceramics industry are becoming more predominantly inorganic nature pigments. Studies in this area allow you to develop pigments with more advanced properties and qualities to be used in the industrial context. Studies on synthesis and characterization of cobalt aluminate has been widely researched, cobalt aluminate behavior at different temperatures of calcinations, highlighting especially the temperatures of 700, 800 and 900° C that served as a basis in the development of this study, using the method of polymerization of complex (CPM), economic, and this method applied in ceramic pigment synthesis. The procedure was developed from a fractional factorial design 2 (5-2) in order to optimize the process of realization of the cobalt aluminate (CoAl2O4), having as response surfaces the batch analysis data of Uv-vis spectroscopy conducted from the statistic software 7.0, for this were chosen five factors as input variables: citric acid (stoichiometric manner), puff or pyrolysis time (h), temperature (° C), and calcinations (° C/min), at levels determined for this study. By applying statistics in the process of obtaining the CoAl2O4 is possible the study of these factors and which may have greater influence in getting the synthesis. The pigments characterized TG/DSC analyses, and x-ray diffraction (XRD) and scanning electron microscope (SEM/EDS) in order to establish the structural and morphological aspects of pigment CoAl2O4, among the factors studied it were found to statically with increasing calcinations temperature 700°< 800 <900 °C, the bands of Uv-vis decrease with increasing intensity of absorbance and that with increasing time of puff or pyrolysis (h) there is an increase in bands of Uv-vis proportionally, the generated model set for the conditions proposed in this study because the coefficient of determination can explain about 99.9% of the variance (R²), response surfaces generated were satisfactory, so it s possible applicability in the ceramics industry of pigments

Propriedade fotoluminescente da ZrO2: Tb+3, Eu+3, Tm+3 obtida pelo método de polimerização de complexos

Recent studies are investigating a new class of inorganic materials which arise as a promising option for high performance applications in the field of photoluminescence. Highlight for rare earth (TR +3 ) doped, which have a high luminous efficiency, long decay time and being able to emit radiation in the visible range, specific to each element. In this study, we synthesized ZrO2: Tb +3 , Eu +3 , Tm +3 nanoparticles complex polymerization method (CPM). We investigated the influences caused by the heat treatment temperature and the content of dopants in zirconia photoluminescent behavior. The particles were calcined at temperature of 400, 500 and 600 ° C for two hours and ranged in concentration of dopants 1, 2, 4 and 8 mol% TR +3 . The samples were characterized by thermal analysis, X-ray diffraction, photoluminescence of measurements and uv-visible of spectroscopies. The results of X-ray diffraction confirmed the formation of the tetragonal and cubic phases in accordance with the content of dopants. The photoluminescence spectra show emission in the region corresponding simultaneous to blue (450 nm), green (550 nm) and red (615 nm). According to the results, ZrO2 particles co-doped with rare earth ions is a promising material white emission with a potential application in the field of photoluminescence

Impacto da variabilidade de peso no controle matebólico de pacientes transplantados cardíacos

Heart transplantation (HT) represents one of the greatest advances in medicine over the last decades. It is indicated for patients with severe heart disease unresponsive to clinical treatment and conventional surgery, poor short-term prognosis and a 1- year mortality rate over 40%. HT has improved survival worldwide (80% in the first year, 70% in five years and 60% in ten years). However, the procedure has been associated with weight change and increased risk of secondary conditions such as diabetes, hypertension, dyslipidemia and obesity due to immunosuppressive therapy following transplantation. The objective of this study was to determine the impact of weight change on the metabolic stability of HT patients. The study was retrospective with data collected from the records of 82 adult patients (83% male; average age 45.06±12.04 years) submitted to HT between October 1997 and December 2005 at a transplantation service in Ceará (Brazil). The selected outcome variables (biopathological profile, weight and body mass index―BMI) were related to biochemical and metabolic change. The results were expressed in terms of frequency, measures of central tendency, Student s t test and Pearson s correlation coefficients. The analysis showed that following HT the average global BMI increased from 23.77±3.68kg/m2 to 25.48±3.92kg/m2 in the first year and to 28.38±4.97kg/m2 in the fifth. Overweight/obese patients (BMI ≥ 25 kg/m2) had higher average levels of glucose, total cholesterol, low-density lipoprotein and triglycerides than patients with eutrophy/malnutrition (BMI < 25 kg/m2). In conclusion, overweight/obese patients were likely to present higher average levels of glucose, triglycerides, total cholesterol and fractions than patients with eutrophy/malnutrition, indicating a direct and significant relation between nutritional status and weight change in the metabolic profile of HT patients

Preparação e carcterização de complexos multicomponentes contendo ciclodextrinas e benznidazol

The benznidazole (BNZ) is the only alternative for Chagas disease treatment in Brazil. This drug has low solubility, which restricts its dissolution rate. Thus, the present work aimed to study the BNZ interactions in binary systems with beta cyclodextrin (β-CD) and hydroxypropyl-beta cyclodextrin (HP-β-CD), in order to increase the apparent aqueous solubility of drug. The influence of seven hydrophilic polymers, triethanolamine (TEA) and 1-methyl-2- pyrrolidone (NMP) in benznidazole apparent aqueous solubility, as well as the formation of inclusion complexes was also investigated. The interactions in solution were predicted and investigated using phase solubility diagram methodology, nuclear magnetic resonance of protons (RMN) and molecular modeling. Complexes were obtained in solid phase by spray drying and physicochemical characterization included the UV-Vis spectrophotometric spectroscopy in the infrared region, scanning electron microscopy, X-ray diffraction and dissolution drug test from the different systems. The increment on apparent aqueous solubility of drug was achieved with a linear type (AL) in presence of both cyclodextrins at different pH values. The hydrophilic polymers and 1-methyl-2-pyrrolidone contributes to the formation of inclusion complexes, while the triethanolamine decreased the complex stability constant (Kc). The log-linear model applied for solubility diagrams revealed that both triethanolamine and 1-methyl-2-pyrrolidone showed an action cosolvent (both solvents) and complexing (1-methyl-2-pyrrolidone). The best results were obtained with complexes involving 1-methyl-2-pyrrolidone and hydroxypropylbeta- cyclodextrin, with an increased of benznidazole solubility in 27.9 and 9.4 times, respectively. The complexes effectiveness was proven by dissolution tests, in which the ternary complexes and physical mixtures involving 1-methyl- 2-pyrrolidone and both cyclodextrins investigated showed better results, showing the potential use as novel pharmaceutical ingredient, that leads to increased benznidazole bioavailability

Obtenção e caracterização de complexos de inclusão binários e ternários com praziquantel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Preparação e caracterização de complexos multicomponentes contendo ciclodextrinas com metotrexato

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Transplantes: re-inserção social e qualidade de vida dos transplantados cardíacos do Estado do RN

The experience of transplantation is a very serious situation from the clinical standpoint. Therefore, there must be some subjective and social breakdown in people who have been undergone such a procedure. Recent product of modernity, the transplanted is someone who owns his recover to the scientific advances of contemporary society and a deceased donor. This paper aims at examine the implications, from the changes in patterns of behavior and thought that occur after the experience of an extreme and critical situation, as the process of illness and its consequent transplant surgery. The symbolism of the heart suggests that some social impressions about the organ itself are also reflected in how the transplanted interprets the experience of this type of procedure. So investigating how the changes occurred throughout the process interfere in the re-insertion of these people to social life, after his recovery, is the purpose of this work. The concept of habitus coined by Pierre Bourdieu will be used to measure conceptually how this experience (clinical, modern and symbolic) fits in the contemporary discussion of sociology