Circuitos em série

O vídeo apresenta os conceitos relativos à circuitos em série, mostrando dispositivos, instrumentos de medição e a resolução dos cálculos, relacionando grandezas como: resistência equivalente, corrente e tensão elétrica V1 e V2.

Sistema de replicação de circuitos integrados digitais baseado em análise comportamental

Nesta dissertação de mestrado é desenvolvido um sistema de replicação de circuitos integrados digitais (combinatórios e sequenciais), por observação do seu normal funcionamento. O sistema desenvolvido carateriza-se pela capacidade de extrair e descrever na linguagem VHDL o comportamento de um circuito integrado digital em funcionamento, utilizando técnicas não invasivas e automatizadas, suportado por um vasto conjunto de algoritmos de aquisição e análise de dados. O sistema desenvolvido assenta em dois módulos principais: um módulo de software que consiste numa plataforma de algoritmos de análise, controlo e gestão do sistema (alojada num computador) e um módulo de aquisição de dados (hardware) que consiste num circuito capaz de realizar as medições necessárias para o funcionamento do sistema, comandado pelo módulo de software. A comunicação entre os dois módulos é efetuada via porta série. Os algoritmos desenvolvidos realizam uma análise da correspondência entre entradas e saídas procurando aplicar uma aproximação a um circuito combinatório se possível, caso contrário são utilizados métodos heurísticos para efetuar uma aproximação a um circuito sequencial através de uma máquina de estados. Entradas ou saídas constantes são previamente identificados e excluídos do processo de análise, para efeitos de simplificação. Os resultados obtidos demonstram que é possível replicar o comportamento observado em circuitos digitais (combinatórios e sequenciais) desde que o número de amostras recolhidas seja adequado. Verifica-se ainda que o método desenvolvido replica a funcionalidade do circuito integrado nas condições onde o circuito está inserido.

Guiando almas femininas: a educação protestante da mulher em impressos confessionais no Brasil e em Portugal (1890-1930)

This paper treats confessional printings as a non formal space for the female education. It reflects on the importance of the woman s role to the diffusion of Protestantism in general, and its Presbyterian trend in particular, besides commenting on the proliferation of printings at the First Republic and its relation with education. In this study, Brazilian Northeastern is seen as a relevant space to the diffusion of Protestantism in Brazil; especially on what concerns the relations between Rio Grande do Norte and Pernambuco. Thereby some fountains were fundamental, as the confessional printings, that is, newspapers, magazines, prospects and other materials recollected in archives located in Natal/RN and Recife/PE, and São Paulo. It was also provided a brief incursion on Portuguese confessional printings kept in Oporto, PT. New Cultural History was chosen as theoretic-methodological guide, franchising ways inside the history of book and reading with the help of concepts like Interdependence, Social Configuration (ELIAS, 1993, 1994) and Representation (CHARTIER, 1990), considering that the survey worked out culture-manufactured products that is, intentional materials. It is well known that publishing, or better, the dissemination of printed material used to be associated to Protestants missionary practices since Reform began and, as what concerns the investigated period, in Portuguese and Brazilian lands indistinctly. Printing material in general books, booklets, fragments, as well as the press itself played a central role in divulging reformed ideas, their social options and the means of being and intervening in the world. In this regard, the confessional printings established themselves as an educative, although non schooled, informal space, but, all considered, relevant, seen that they dialogue with another important demand of that social group: formal, literate education. Because it dealt with the diffusion of a printed culture supported by the written word, it required of that group a different modus operandi: formal education. The first letters schools at first, then the high schools later represented spaces established for the circulation of printing material in order that they should be read, divulged and comprehended. This survey intends at last to take a look at Protestantism which, in this context of self-affirmation, reserved a specific place to woman by working out a non formal educational proposal disseminated by printing material. Three models were highlighted in the reformed proposal: Christian education in itself, household education, whose references of motherhood and care towards the neighbor were present and, at last, education to the public space, with emphasis on the practice of teaching. This study also offers a brief dialogue between Brazil and Portugal because, when some periodic printing, book or something like that got to be published in one margin of the Atlantic Ocean, the other margin surely was affected by that feat, received it, divulged it, corroborating the argument in support of the circulation of these printings. It was not only the same language that survived in both maritime coasts; some protestant specificities also crossed out along that sea

Análise e síntese de antenas e superfícies seletivas de frequência utilizando computação evolucionária e inteligência de enxames

The frequency selective surfaces, or FSS (Frequency Selective Surfaces), are structures consisting of periodic arrays of conductive elements, called patches, which are usually very thin and they are printed on dielectric layers, or by openings perforated on very thin metallic surfaces, for applications in bands of microwave and millimeter waves. These structures are often used in aircraft, missiles, satellites, radomes, antennae reflector, high gain antennas and microwave ovens, for example. The use of these structures has as main objective filter frequency bands that can be broadcast or rejection, depending on the specificity of the required application. In turn, the modern communication systems such as GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi and WiMAX, whose services are highly demanded by society, have required the development of antennas having, as its main features, and low cost profile, and reduced dimensions and weight. In this context, the microstrip antenna is presented as an excellent choice for communications systems today, because (in addition to meeting the requirements mentioned intrinsically) planar structures are easy to manufacture and integration with other components in microwave circuits. Consequently, the analysis and synthesis of these devices mainly, due to the high possibility of shapes, size and frequency of its elements has been carried out by full-wave models, such as the finite element method, the method of moments and finite difference time domain. However, these methods require an accurate despite great computational effort. In this context, computational intelligence (CI) has been used successfully in the design and optimization of microwave planar structures, as an auxiliary tool and very appropriate, given the complexity of the geometry of the antennas and the FSS considered. The computational intelligence is inspired by natural phenomena such as learning, perception and decision, using techniques such as artificial neural networks, fuzzy logic, fractal geometry and evolutionary computation. This work makes a study of application of computational intelligence using meta-heuristics such as genetic algorithms and swarm intelligence optimization of antennas and frequency selective surfaces. Genetic algorithms are computational search methods based on the theory of natural selection proposed by Darwin and genetics used to solve complex problems, eg, problems where the search space grows with the size of the problem. The particle swarm optimization characteristics including the use of intelligence collectively being applied to optimization problems in many areas of research. The main objective of this work is the use of computational intelligence, the analysis and synthesis of antennas and FSS. We considered the structures of a microstrip planar monopole, ring type, and a cross-dipole FSS. We developed algorithms and optimization results obtained for optimized geometries of antennas and FSS considered. To validate results were designed, constructed and measured several prototypes. The measured results showed excellent agreement with the simulated. Moreover, the results obtained in this study were compared to those simulated using a commercial software has been also observed an excellent agreement. Specifically, the efficiency of techniques used were CI evidenced by simulated and measured, aiming at optimizing the bandwidth of an antenna for wideband operation or UWB (Ultra Wideband), using a genetic algorithm and optimizing the bandwidth, by specifying the length of the air gap between two frequency selective surfaces, using an optimization algorithm particle swarm

Desenvolvimento de circuitos planares sobre substratos têxteis

The use of flexible materials for the development of planar circuits is one of the most desired and studied characteristics, lately, by researchers. This happens because the flexibility of the substrate can provide previously impracticable applications, due to the rigidity of the substrates normally used that makes it difficult to fit into the circuits in irregular surfaces. The constant interest in recent years for more lighter devices, increasingly more compacts, flexible and with low cost, led to a new line of research of great interest from both academic and technological views, that is the study and development of textile substrates that can be applied in the development of planar circuits, for applications in the areas of security, biomedical and telecommunications. This paper proposes the development of planar circuits, such as antennas , frequency selective surfaces (FSS) and planar filters, using textile (cotton ticking, jeans and brim santista) as the dielectric substrate and the Pure Copper Polyester Taffeta Fabric, a textile of pure copper, highly conductive, lightweight and flexible, commercially sold as a conductive material. The electrical characteristics of textiles (electric permittivity and loss tangent) were characterized using the transmission line method (rectangular waveguide) and compared with those found in the literature. The structures were analyzed using commercial software Ansoft Designer and Ansoft HFSS, both from the company Ansys and for comparison we used the Iterative Method of Waves (WCIP). For the purpose of validation were built and measured several prototypes of antennas, planar filters and FSS, being possible to confirm an excellent agreement between simulated and measured results

Implementação de um algoritmo para a análise de curtos-circuitos de alta impedância baseado no fluxo de carga soma de potências

This work has as main objective to show all the particularities regarding the Three-phase Power Summation Method, used for load flow calculation, in what it says respect to the influence of the magnetic coupling among the phases, as well as to the losses presented in all the existent transformers in the feeder to be analyzed. Besides, its application is detailed in the study of the short-circuits, that happen in the presence of high impedance values, which possess a problem, that is its difficult detection and consequent elimination on the part of common devices of protection. That happens due to the characteristic presented by the current of short¬ circuit, in being generally of the same order of greatness that the load currents. Results of simulations accomplished in several situations will be shown, objectifying a complete analysis of the behavior of the proposed method in several types of short-circuits. Confront of the results obtained by the method with results of another works will be presented to verify its effectiveness

Metodologia de Verificação Funcional para Circuitos Analógicos

This work proposes a new methodology to verify those analog circuits, providing an automated tools to help the verifiers to have a more truthful result. This work presents the development of new methodology for analog circuits verification. The main goal is to provide a more automated verification process to certify analog circuits functional behavior. The proposed methodology is based on the golden model technique. A verification environment based on this methodology was built and results of a study case based on the validation of an operational amplifier design are offered as a confirmation of its effectiveness. The results had shown that the verification process was more truthful because of the automation provided by the tool developed

Caracterização de circuitos planares de micro-ondas pelo método iterativo das ondas

The planar circuits are structures that increasingly attracting the attention of researchers, due the good performance and capacity to integrate with other devices, in the prototyping of systems for transmitting and receiving signals in the microwave range. In this context, the study and development of new techniques for analysis of these devices have significantly contributed in the design of structures with excellent performance and high reliability. In this work, the full-wave method based on the concept of electromagnetic waves and the principle of reflection and transmission of waves at an interface, Wave Concept Iterative Procedure (WCIP), or iterative method of waves is described as a tool with high precision study microwave planar circuits. The proposed method is applied to the characterization of planar filters, microstrip antennas and frequency selective surfaces. Prototype devices were built and the experimental results confirmed the proposed mathematical model. The results were also compared with simulated results by Ansoft HFSS, observing a good agreement between them.

O leitor universitário e a construção das práticas de ler e escrever textos impressos e digitais

The construction of a mapping of the practices of reading and writing printed and digital texts, declared by graduating students from the Bachelor s degree in Science and Technology (BCT), has provided us the analysis of the course they are making in such a socio-historical moment characterized by the revolution of the post-paper. In this sense, the general objective of this research is to understand how that construction works under the point of view of those graduating students. For this, our reflection has been guided by the search of answers for some questions which have presented to us: what reading and writing conceptions BCT graduating students have; what reading and writing practices those collaborators develop; what collections they declare to have access to; what differences they declare to have between printed and digital reading and writing along the different social roles they develop; what the reader/writer identity relations of those collaborators are. To achieving the plausible answers, we have gathered a corpus composed by texts of three genres of the argument order: academic profiles (or self-portrait), opinion articles and argumentative letters. Besides, we have made semi-structured interviews and questionnaires in the online tool of the Google Docs. The methodology which supports this academic work is the qualitative research (SIGNORINI; CAVALCANTI, 1998)of ethnographic direction (THOMAS, 1993; ANDRÉ, 1995) in Applied Linguistics (CELANI, 2000; MOITA-LOPES, 2006) and the theoretical contribution comes from the bakhtinian perspective of language conception (BAKHTIN [1929] 1981); the socio-historical writing construction (LÉVY, 1996; CHARTIER, R., 1998, 2002, 2007; COSCARELLI, 2006; CHARTIER, A., 2007; ARAÚJO, 2007; COSCARELLI; RIBEIRO, 2007; XAVIER, 2009; MARCUSCHI; XAVIER, 2010); from the studies of the pedagogy of the writing (GIROUX, 1997); from the literacy studies understood as sociocultural practice, plural and situated (TFOUNI, 1988; KLEIMAN, 1995; TINOCO, 2003, 2008; OLIVEIRA; KLEIMAN, 2008), from the studies about identity in postmodernity (HALL, 2003; BAUMAN, 2005). The results of the analysis have pointed at a multiplicity of reading/writing practices of printed and digital texts developed by the BCT graduating students due to the coexistence of the modality printed and that one derived from the new mobile devices. In that multiplicity, the prevalent idea of the collaborators is that there is a continuum between printed texts and digital texts (not a dichotomy), since the option of reading/writing printed texts or digital ones is always linked to specific communication situations, which involve participants, objectives, strategies, values, (dis)advantages, besides (re)creation of discursive genres in function of the mobile devices to which those collaborators have access in the different spheres of activities that they participate. All of that has caused a deep intersection in the identity traces of college students readers/writers in the 21st century which cannot be ignored by academic formation

Das estantes para a tela: práticas de leitores de livros impressos e digitais do curso de Comunicação Social da Universidade Federal do Rio Grande do Norte

La cultura del libro impreso impregna la vida cotidiana de los lectores durante más de cinco siglos, y de esto, hábitos y significados a cerca del libro como medio de comunicación tienen sus raíces en la comunidad lectora, en una especie de contrato de lectura (VERÓN, 2004). Por lo tanto, creemos que es posible conjeturar que la aparición del libro digital puede cambiar las viejas prácticas en relación con el libro impreso y por eso mismo deben ser investigadas con el fin de entender este tiempo de productos reconfigurados. Consciente de ello, el tema central de nuestra investigación se basa en la comprensión de cómo los lectores de libros digitales realizan sus prácticas. Nuestro objetivo general es investigar las prácticas socioculturales de los lectores de libros digitales, con el fin de mostrar las continuidades y discontinuidades en el uso del libro en su formato impreso y digital. Con este fin, se busca 1) proponer una caracterización de la cultura del libro impreso, que es el apoyo a una asignación posible de las marcas de una cultura del libro digital, y 2) explorar los lugares de producción y oferta de los libros digitales, especialmente en Brasil, fin de delimitar en su primera configuración. Apoyamos, como propuesta metodológica, la sistematización de dimensiones culturales del libro impreso llamadas: ritualidad, simbología, materialidad y forma, lo que ayudará el enfoque del empírico. Nuestra propuesta se basa, en varios puntos, en los investigadores de la historia del libro, insertada en el campo de la Historia Cultural (BURKE, 2008; CHARTIER, 1992, 1994, 2006; DARNTON, 1990, 2006, 2010). Adoptamos como técnica de investigación el análisis de voces, registradas a través de entrevistas en profundidad, de lectores de libros en formato digital. Antes de eso, creemos apropiado emprender un estudio exploratorio basado en la aplicación de un cuestionario online. Nuestra delimitación incluye lectores de libros digitales del curso de Comunicación Social de la Universidad Federal de Rio Grande do Norte. Entre las conclusiones de esta disertación, es posible señalar que el grupo de lectores investigados está sólidamente ligado a las experiencias con los libros impresos y esto afecta en gran medida las prácticas de los libros digitales

Circuitos espaciais de produção da atividade boneleira: o uso dos territórios de Caicó, Serra Negra do Norte e São José do Seridó

Cette étude a été fondée sur la reconaissance, la description et l'analyse du circuit spatial de la production de l activité des fabriques des casquettes dans la région du Seridó Potiguar. L activité des fabriques des casquettes est située dans les villes de Caicó, Serra Negra do Norte e São José do Seridó, qui forment le pôle de fabriques de casquettes, composé de soixante-quatre (64) unités de fabrication, le deuxième plus grand producteur de casquettes au Brésil. Dans la condition de base géographique, l'opérationnalisation du concept de circuits spatiales de la production a été essentielle à la compréhension de l'utilisation du territoire et de l'indivisibilité de l'espace, du fournisseur de matières premières au consommateur final, comprenant les étapes des matières premières, la main-d'oeuvre, le stockage, les transports, le commerce et la consommation dans la période actuelle, dans laquelle les instances de la production, la circulation, la distribution et de la consommation sont spatialement diffus. Sur la base de l'identification et de la localisation de ces étapes et des principaux acteurs impliqués dans la activité des fabriques de casquettes, une configuration de circuit spatial de la production a été élaborée, en s'interprétant l'utilisation des territoires par les instances productives. L'interprétation des étapes de production a identifié que les entreprises liées à l'Association Seridoense des Fabricants de Casquettes agissent plus efficacement sur le territoire que celles nonassociées, alors que toujours elles investissent dans des nouveaux équipements, en augmentant sa puissance technique pour se renforcer avant un marché si compétitif comme celui des casquettes. En examinant la contribution de la fabrication des casquettes à l'utilisation actuelle des territoires de la coupe, nous avons appris que les activités complémentaires et des matières premiéres nécessaires à sa réalisation se trouvent dans leur environnement géographique. Ainsi, la proximité spatiale entre les étapes de la fabrication des casquettes fait entrevoir la matérialité du territoire, conférée dans la coexistence des techniques passées et présentes, et l'ensemble des actions effectuées par un certain nombre de travailleurs sociaux qui collaborent à la création du circuit spatial de la production de l activité des fabriques des casquettes. Cette étude a confirmé que les fabriques des casquettes sont organisées sous la forme de cellules de production, continues ou discontinues, dont les équipements et les machines à coudre industrielles obéissent à la logique d'une production de plus en plus standardisée. Ce circuit spatial de la production contribue à l'utilisation actuelle des territoires de Caicó, Serra Negra do Norte et de São José do Seridó car il amplifie le mouvement du commerce et des relations entre les lieux, à travers la dynamique des flux des personnes, des biens et des produits, en constante circulation, guidées par la division du travail entre les étapes productives

Feira livre e circuitos da economia urbana: um estudo da feira da Pedra, em São Bento (PB)

The Feira da Pedra is an extension of the open fair of São Bento in the State of Paraiba. It is a system of trade in textile goods produced by textile industry in manufacturing of hammocks and derivatives of this industry, present in some cities in the state of Paraiba and Rio Grande do Norte, as a survival strategy, inserted in the list of tertiary and retail of the urban economics of this city. It is thereby aimed to discuss about the urban economics, reflecting on the open fair system from the two circuits of urban economy, mainly in the context of the dynamics of the current period of geographic space, the technical-scientific-informational period, as the specific empirical object, the Feira da Pedra of São Bento (PB). For this, this research was carried out in two stages of operation: a) surveys of secondary data and b) primary data collection which were reported an operational triad: I) literature; II) documentary research, and III) research of field. The presence of the Feira da Pedra in São Bento has shown us one of the most important characteristics of this city, in order to present major economic, social and cultural benefits to the local population, and contribute to (re) production of sertanejo space, making lower part of the circuit of its urban economy. This activity has entailed several dynamics for urban space in this city, mainly because of attracting large numbers of people, carrying typical actions of its relationship with the urban space are são-bentense and built environment. Thus, its importance is not only a local and regional phenomenon, but also a cultural reference of a place in the geographical area of many paraibanos and norte-rio-grandenses subjects, as the case of this activity has brought to its weekly routine, this product resulting from the textile working of this area of Sertão Paraibano and Seridó Potiguar

A Ceasa-RN e os circuitos da economia urbana: a circulação de hortifrutigranjeiros em Natal-RN

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Compreendendo a governança territorial e suas possibilidades: Arranjos Produtivos Locais (APL) e circuitos turísticos

Cet article rassemble des concepts, des théories et des données afin de comprendre comment ils articulent les nouvelles formes de gouvernance du territoire, à travers les stratégies institutionnelles et organisationnelles des acteurs locaux à mobiliser les actifs spécifiques des territoires dans les projets de développement local. Cette étude propose une base théorique pour les études appliquées à essayer de comprendre comment exprimer les organisations et institutions, ses acteurs et ses agents dans l'environnement de la structure de gouvernance territoriale, étant donné les cours divers secteurs socio-spatiale et territoriale au Brésil. Ainsi, les arrangements productifs locaux (APL) et Tours apparaissent comme des stratégies novatrices pour la gouvernance territoriale étant donné le caractère de sa propre configuration de la relation entre l'Etat, privées et autres institutions sociales.