Earliness penalties on a single machine subject to precedence constraints: SLK due date assignment

The paper considers the single machine due date assignment and scheduling problems with n jobs in which the due dates are to be obtained from the processing times by adding a positive slack q. A schedule is feasible if there are no tardy jobs and the job sequence respects given precedence constraints. The value of q is chosen so as to minimize a function ϕ(F,q) which is non-decreasing in each of its arguments, where F is a certain non-decreasing earliness penalty function. Once q is chosen or fixed, the corresponding scheduling problem is to find a feasible schedule with the minimum value of function F. In the case of arbitrary precedence constraints the problems under consideration are shown to be NP-hard in the strong sense even for F being total earliness. If the precedence constraints are defined by a series-parallel graph, both scheduling and due date assignment problems are proved solvable in time, provided that F is either the sum of linear functions or the sum of exponential functions. The running time of the algorithms can be reduced to if the jobs are independent. Scope and purpose We consider the single machine due date assignment and scheduling problems and design fast algorithms for their solution under a wide range of assumptions. The problems under consideration arise in production planning when the management is faced with a problem of setting the realistic due dates for a number of orders. The due dates of the orders are determined by increasing the time needed for their fulfillment by a common positive slack. If the slack is set to be large enough, the due dates can be easily maintained, thereby producing a good image of the firm. This, however, may result in the substantial holding cost of the finished products before they are brought to the customer. The objective is to explore the trade-off between the size of the slack and the arising holding costs for the early orders.

Impact of operator experience on information feedback and reusability

Keeping a record of operator experience remains a challenge to operation management and a major source of inefficiency in information management. The objective is to develop a framework that enables an explicit presentation of experience based on information use. A purposive sampling method is used to select four small and medium-sized enterprises as case studies. The unit of analysis is the production process in the machine shop. Data collection is by structured interview, observation and documentation. A comparative case analysis is applied. The findings suggest experience is an accumulation of tacit information feedback, which can be made explicit in information use interoperatability matrix. The matrix is conditioned upon information use typology, which is strategic in waste reduction. The limitations include difficulty of participant anonymity where the organisation nominates a participant. Areas for further research include application of the concepts to knowledge management and shop floor resource management.

The role of operations management in public sector policy and practice alignment: a local government analysis

In responding to the demand for change and improvement, local government has applied a plethora of operations management-based methods, tools and techniques. This article explores how these methods, specifically in the form of performance management models, are used to improve alignment between central government policy and local government practice, an area which has thus far been neglected in the literature. Using multiple case studies from Environmental Waste Management Services, this research reports that models derived in the private sector are often directly ‘implanted’ into the public sector. This has challenged the efficacy of all performance management models. However, those organisations which used models most effectively did so by embedding (contextualisation) and extending (reconceptualisation) them beyond their original scope. Moreover, success with these models created a cumulative effect whereby other operations management approaches were probed, adapted and used.

Using vulnerability performance indicators to attain food supply chain robustness

High effectiveness and leanness of modern supply chains (SCs) increase their vulnerability, i.e. susceptibility to disturbances reflected in non-robust SC performances. Both the SC management literature and SC professionals indicate the need for the development of SC vulnerability assessment tools. In this article, a new method for vulnerability assessment, the VULA method, is presented. The VULA method helps to identify how much a company would underperform on a specific Key Performance Indicator in the case of a disturbance, how often this would happen and how long it would last. It ultimately informs the decision about whether process redesign is appropriate and what kind of redesign strategies should be used in order to increase the SC's robustness. The applicability of the VULA method is demonstrated in the context of a meat SC using discrete-event simulation to conduct the performance analysis.

Bricks vs. clicks: Which is better for marketing remanufactured products?

The economical and environmental benefits are the central issues for remanufacturing. Whereas extant remanufacturing research focuses primarily on such issues in remanufacturing technologies, production planning, inventory control and competitive strategies, we provide an alternative yet somewhat complementary approach to consider both issues related to different channels structures for marketing remanufactured products. Specifically, based on observations from current practice, we consider a manufacturer sells new units through an independent retailer but with two options for marketing remanufactured products: (1) marketing through its own e-channel (Model M) or (2) subcontracting the marketing activity to a third party (Model 3P). A central result we obtain is that although Model M is always greener than Model 3P, firms have less incentive to adopt it because both the manufacturer and retailer may be worse off when the manufacturer sells remanufactured products through its own e-channel rather than subcontracting to a third party. Extending both models to cases in which the manufacturer interacts with multiple retailers further reveals that the more retailers in the market, the greener Model M relative to Model 3P.

Developing management capability within a horizontal supply chain in performance measurement deployment and evolution: A Dynamic Capabilities and Goal Theory perspective

Complex collaboration in rapidly changing business environments create challenges for management capability in Utility Horizontal Supply Chains (UHSCs) involving the deploying and evolving of performance measures. The aim of the study is twofold. First, there is a need to explore how management capability can be developed and used to deploy and evolve Performance Measurement (PM), both across a UHSC and within its constituent organisations, drawing upon a theoretical nexus of Dynamic Capability (DC) theory and complementary Goal Theory. Second, to make a contribution to knowledge by empirically building theory using these constructs to show the management motivations and behaviours within PM-based DCs. The methodology uses an interpretive theory building, multiple case based approach (n=3) as part of a USHC. The data collection methods include, interviews (n=54), focus groups (n=10), document analysis and participant observation (reflective learning logs) over a five-year period giving longitudinal data. The empirical findings lead to the development of a conceptual framework showing that management capabilities in driving PM deployment and evolution can be represented as multilevel renewal and incremental Dynamic Capabilities, which can be further understood in terms of motivation and behaviour by Goal-Theoretic constructs. In addition three interrelated cross cutting themes of management capabilities in consensus building, goal setting and resource change were identified. These management capabilities require carefully planned development and nurturing within the UHSC. 

Environmental and social supply chain management sustainability practices: construct development and measurement

The purpose of this paper is to conceptualise and operationalise the concept of supply chain management sustainability practices. Based on a multi-stage procedure involving a literature review, expert Q-sort and pre-test process, pilot test and survey of 156 supply chain directors and managers in Ireland, we develop a multidimensional conceptualisation and measure of social and environmental supply chain management sustainability practices. The research findings show theoretically sound constructs based on four underlying sustainable supply chain management practices: monitoring, implementing systems, new product and process development and strategy redefinition. A two-factor model is then identified as the most reliable: comprising process-based and market-based practices.

Partner selection in green supply chains using PSO - a practical approach

Partner selection is crucial to green supply chain management as the focal firm is responsible for the environmental performance of the whole supply chain. The construction of appropriate selection criteria is an essential, but often neglected pre-requisite in the partner selection process. This paper proposes a three-stage model that combines Dempster-Shafer belief acceptability theory and particle swarm optimization technique for the first time in this application. This enables optimization of both effectiveness, in its consideration of the inter-dependence of a broad range of quantitative and qualitative selection criteria, and efficiency in its use of scarce resources during the criteria construction process to be achieved simultaneously. This also enables both operational and strategic attributes can be selected at different levels of hierarchy criteria in different decision-making environments. The practical efficacy of the model is demonstrated by an application in Company ABC, a large Chinese electronic equipment and instrument manufacturer.

Sähkön ja lämmön yhteistuotannon optimointi

Työn tavoitteena oli suunnitella ja toteuttaa sähkön ja lämmön yhteistuotantolaitoksen tuotannon optimointi. Optimoinnin kriteerinä on tuotannon kannattavuus. Pyrittiin luomaan optimointimalli, joka ottaa optimoinnissa huomioon erityisesti kaukolämmön kulutusennusteen muutokset sekä sähkön pörssihinnan vaihtelut. Tuotannon kannalta olennaisin kriteeri on kaukolämmön kulutusennusteen pohjalta arvioidun kaukolämpökuorman tyydyttäminen mahdollisimman tehokkaasti ja taloudellisesti. Sähkön tuotannon merkittävimmiksi kriteereiksi muodostuivat sähkön tuotannon ennustettavuus ja tuotannon maksimointi sähkön pörssihinnan asettamissa puitteissa. Optimointiohjelmaa ei ole tarkoitus kytkeä suoraan voimalaitoksen ajojärjestelmään, vaan siitä on tarkoitus tulla erillinen ajosuunnittelijan työkalu. Itse ajosuunnitteluun vaikuttaa usein monipuolisemmat suunnittelukriteerit kuin pelkästään tuotannon tuottavuus. Näiden eri kriteerien painotuksia ei ohjelmassa huomioida, vaan ne päättää ajosuunnittelija. Tuloksena saatiin aikaan optimointiohjelma, joka laskee valittujen tuotantovaihtoehtojen kokonaistuotot eri kaukolämmön kulutusennusteiden ja sähkön pörssihintaennusteiden pohjalta.

Coordinating Inventory Control and Pricing Strategies with Random Demand and Fixed Ordering Cost: the Infinite Horizon Case

We analyze an infinite horizon, single product, periodic review model in which pricing and production/inventory decisions are made simultaneously. Demands in different periods are identically distributed random variables that are independent of each other and their distributions depend on the product price. Pricing and ordering decisions are made at the beginning of each period and all shortages are backlogged. Ordering cost includes both a fixed cost and a variable cost proportional to the amount ordered. The objective is to maximize expected discounted, or expected average profit over the infinite planning horizon. We show that a stationary (s,S,p) policy is optimal for both the discounted and average profit models with general demand functions. In such a policy, the period inventory is managed based on the classical (s,S) policy and price is determined based on the inventory position at the beginning of each period.

Los conceptos de salud financiera, riesgo y epidemiología en los estados financieros de las compañías del sector de extracción de petróleo crudo y gas natural en Colombia

El presente proyecto tiene como objeto identificar cuáles son los conceptos de salud, enfermedad, epidemiología y riesgo aplicables a las empresas del sector de extracción de petróleo y gas natural en Colombia. Dado, el bajo nivel de predicción de los análisis financieros tradicionales y su insuficiencia, en términos de inversión y toma de decisiones a largo plazo, además de no considerar variables como el riesgo y las expectativas de futuro, surge la necesidad de abordar diferentes perspectivas y modelos integradores. Esta apreciación es pertinente dentro del sector de extracción de petróleo y gas natural, debido a la creciente inversión extranjera que ha reportado, US$2.862 millones en el 2010, cifra mayor a diez veces su valor en el año 2003. Así pues, se podrían desarrollar modelos multi-dimensional, con base en los conceptos de salud financiera, epidemiológicos y estadísticos. El termino de salud y su adopción en el sector empresarial, resulta útil y mantiene una coherencia conceptual, evidenciando una presencia de diferentes subsistemas o factores interactuantes e interconectados. Es necesario mencionar también, que un modelo multidimensional (multi-stage) debe tener en cuenta el riesgo y el análisis epidemiológico ha demostrado ser útil al momento de determinarlo e integrarlo en el sistema junto a otros conceptos, como la razón de riesgo y riesgo relativo. Esto se analizará mediante un estudio teórico-conceptual, que complementa un estudio previo, para contribuir al proyecto de finanzas corporativas de la línea de investigación en Gerencia.

Una aproximación al mejoramiento de la cadena de abastecimiento. centro de distribución de repuestos GM Colmotores

Este trabajo de investigación se desarrolló con el fin de buscar alternativas de mejora para la operación de despacho de repuestos hacia los concesionarios del Centro de Distribución de Repuestos de GM Colmotores, investigando posibles formas para mantener y aumentar los estándares de productividad de este CEDI, mientras se mitiga la variabilidad de los despachos derivada de la inestabilidad de la demanda de los concesionarios y sus clientes.

Re-measuring labor's share

Measuring labor's share of an economy's aggregate income seems straightforward, at least in principle. Count up wage and salary income, along with the value of benefits provided to employees, and divide it by total income. However, one fundamental concept of labor's share in macroeconomic theory is not the amount of aggregate income paid out to labor. Rather, it is the share of aggregate production that is attributable to "raw" units of labor. Or, otherwise stated, it is the share of aggregate income that would have been paid to laborers if they had no accumulated stocks of human capital.1 This share corresponds to an aggregate production function parameter: the elasticity of output with respect to physical (i.e. non-augmented or raw) units of labor (Robert Solow, 1957). In this paper we estimate annual raw labor’s share for the US, 1949 to 1996.

Why labor income shares seem to be constant?

The common assumptions that labor income share does not change over time or across countries and that factor income shares are equal to the elasticity of output with respect to factors have had important implications for economic theory. However, there are various theoretical reasons why the elasticity of output with respect to reproducible factors should be correlated with the stage of development. In particular, the behavior of international trade and capital flows and the existence of factor saving innovations imply such a correlation. If this correlation exists and if factor income shares are equal to the elasticity of output with respect to factors then the labor income share must be negatively correlated with the stage of development. We propose an explanation for why labor income share has no correlation with income per capita: the existence of a labor intensive sector which produces non tradable goods.

Implementació i validació d'un sistema assistit aplicat a la planificació del procés de peces de mecanitzat

El projecte s’emmarca en el sector de la planificació de la producció especialitzada en processos de mecanització per assistir a la presa de decisions a les PIMES del sector. S’integra en el desenvolupament del programa PAPOM (Programa Assistit a la Planificació de Procés i producció en Operacions de Mecanitzat) desenvolupat pel grup de recerca GREP (Grup de Recerca en Enginyeria de Procés, Producte i Producció), centrant-se en l’estudi del càlcul dels temps de tall