Estudo longitudinal da resistência adesiva aos substratos dentários de sistemas adesivos associados ou não ao Nd:YAG Laser

Pós-graduação em Odontologia Restauradora - ICT

Resistência ao microcisalhamento de diferentes sistemas adesivos no esmalte dental humano

Pós-graduação em Odontologia Restauradora - ICT

Avaliação do efeito protetor da Euterpe oleracea (açaí) na resposta eletrofisiológica da retina de ratos expostos ao metilmercúrio

O metilmercúrio (MeHg) é a forma mais tóxica do mercúrio. A exposição ao MeHg gera estresse oxidativo, podendo afetar a retina, pois esta possui alta vulnerabilidade em função do seu elevado conteúdo de ácidos graxos poliinsaturados e consumo de oxigênio. Nesse contexto, a administração de antioxidantes exógenos obtidos pela dieta, como os presentes na Euterpe oleracea (açaí), poderia ser uma forma de prevenir esse desequilíbrio e suas consequências. Portanto, o objetivo deste trabalho foi avaliar o possível efeito protetor da Euterpe oleracea nas alterações eletrofisiológicas causadas pelo MeHg na retina. Para tal, foi realizada gavagem com MeHgCl (5 mg/Kg) ou solução salina (NaCl 0,9%) durante 7 dias e pré-tratamento com ração enriquecida com polpa de açaí (10%) por 28 dias. Foram utilizados ratos Wistar divididos em 4 grupos: Grupo MeHg (recebeu ração padrão e MeHgCl); MeHg+Açaí (ração enriquecida com açaí e MeHgCl); Açaí (ração enriquecida com açaí e NaCl); Veículo (ração padrão e NaCl). Um dia após a última gavagem os animais foram submetidos ao eletrorretinograma de campo total (ffERG) para obtenção da resposta escotópica (de bastonetes, mista 1 e mista 2) e fotópica (de cones e de flicker em 12; 18; 24 e 30Hz). No dia seguinte ao ffERG foi aplicado o teste campo aberto para avaliar a atividade locomotora dos animais. Posteriormente, foi feita medição de peroxidação lipídica no tecido retiniano pelo método TBARS. A análise estatística foi feita pelo teste ANOVA de uma via com pós-teste de Tukey, considerando significativo p<0,05. Os resultados do campo aberto e da massa corporal não apresentaram diferença entre os grupos. O MeHg reduziu a amplitude das seguintes respostas: onda-b da resposta de bastonetes (Veículo: 114,6±23,6 μV e MeHg: 41,2±9,6 μV); onda-a (Veículo: 8,4±1,4 μV e MeHg: 3,4±0,3 μV) e onda-b (Veículo: 176,7±17,8 μV e MeHg: 69,5±12,0 μV) na resposta mista 1; onda-a (Veículo: 103,1 ±23,3 μV e MeHg: 40,2±9,6 μV) e onda-b (Veículo: 281±,38,3 μV e MeHg: 138,6±14 μV) da resposta mista 2; onda-a (Veículo: 27,2 ±3,6 μV e MeHg: 7,5±1,8 μV) e onda-b (Veículo: 139,3±16,1 μV e MeHg: 54,4±10 μV) da resposta de cones; onda-b nas frequências 12 Hz (Veículo: 67,7±10μV e MeHg: 28,6±6,9 μV), 18 Hz (Veículo: 31,3±3,4 μV e MeHg: 14,2± 2,3 μV) e 24 Hz (Veículo: 21,0±1,8μV e MeHg: 11,0± 1,1μV) e 30 Hz (Veículo: 10,9±0,6μV e MeHg: 6,0± 1,1μV). O tempo implícito das ondas não foi alterado em nem uma das respostas. O pré-tratamento com Euterpe oleracea evitou a redução de amplitude de ambas as ondas nas respostas mista 1 (onda-a: 8,3±0,6 μV; onda b: 144,1±7,1 μV) e mista 2 (onda-a: 106,4±13,6μV; onda b: 275,2±27,6 μV), assim como da onda-b da resposta de cones (104,5±5,9 μV) e fotópica de flicker em 12 Hz (67,2±9,1 μV), 18 Hz (29,5±4,8 μV) e 24 Hz (21,9±2,4 μV). A peroxidação lipídica no tecido retiniano do grupo MeHg (294,9±205,8%) foi maior que a do Veículo (100±25,1%) e o açaí protegeu contra esse dano oxidativo (MeHg+Açaí: 111,2±26,1%). Nossos resultados demonstraram alteração difusa na resposta eletrofisiológica e aumento na peroxidação lipídica da retina induzidos pelo MeHg e proteção exercida pelo açaí nesses dois parâmetros. Assim, a Euterpe oleracea poderia ser utilizada como importante alternativa para amenizar as alterações causadas pelo MeHg na retina.

Influence of Different Surface Treatments on Bond Strength of Resin Composite Using the Intrinsic Characterization Technique

Objective: This study evaluated the influence of different surface treatments on the resin bond strength/light-cured characterizing materials (LCCMs), using the intrinsic characterization technique. The intrinsic technique is characterized by the use of LCCMs between the increments of resin composite (resin/thin film of LCCM/external layer of resin covering the LCCM).Materials and Methods: Using a silicone matrix, 240 blocks of composite (Z350/3M ESPE) were fabricated. The surfaces received different surface treatments, totaling four groups (n=60): Group C (control group), no surface treatment was used; Group PA, 37% phosphoric acid for one minute and washing the surface for two minutes; Group RD, roughening with diamond tip; and Group AO, aluminum oxide. Each group was divided into four subgroups (n=15), according to the LCCMs used: Subgroup WT, White Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup BT, Black Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup WK, White Kolor Plus pigment (Kerr) LCCM; Subgroup BK, Brown Kolor Plus pigment (Kerr) LCCM. All materials were used according to the manufacturer's instructions. After this, block composites were fabricated over the LCCMs. Specimens were sectioned and submitted to microtensile testing to evaluate the bond strength at the interface. Data were submitted to two-way analysis of variance (ANOVA) (surface treatment and LCCMs) and Tukey tests.Results: ANOVA presented a value of p<0.05. The mean values (+/- SD) for the factor surface treatment were as follows: Group C, 30.05 MPa (+/- 5.88)a; Group PA, 23.46 MPa (+/- 5.45)b; Group RD, 21.39 MPa (+/- 6.36)b; Group AO, 15.05 MPa (+/- 4.57)c. Groups followed by the same letters do not present significant statistical differences. The control group presented significantly higher bond strength values than the other groups. The group that received surface treatment with aluminum oxide presented significantly lower bond strength values than the other groups.Conclusion: Surface treatments of composite with phosphoric acid, diamond tip, and aluminum oxide significantly diminished the bond strength between composite and the LCCMs.

Avaliação da resistência adesiva entre um cimento resinoso e ligas para metalo-cerâmica submetidas a dois diferentes condicionamentos de supefície

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Frequency of HLA-B27 and its alleles in patients with Reiter syndrome: comparison with the frequency in other spondyloarthropathies and a healthy control population

This retrospective study analyzed the HLA-B*27 alleles in a group of 20 consecutive patients with the diagnosis of Reiter syndrome (RS) followed in a tertiary referral university hospital in Brazil, during the period 1990-2006, and compared the data with that observed in other patients with spondyloarthropathies followed at the same institution. Eight cases were associated to gastrointestinal infection, eight cases to previous urethritis, and four cases presented no established preceding infection. HLA-B*27 alleles were typed by polymerase chain reaction-amplified DNA hybridized with sequence-specific oligonucleotide probes (HLA-B*2701 to HLA-B*2721). They were compared to a group of 108 patients with ankylosing spondylitis (AS), 40 with undifferentiated spondyloarthropathy (uSpA) and 111 healthy controls. Among the 20 patients, 17 were HLA-B*27 positive (85%). Two HLA-B*27 alleles were observed: HLA-B*2705 (65%) and HLA-B*2702 (35%). In the other spondyloarthropathies, the observed alleles were HLA-B*2705 (90% in AS and 92.5% in uSpA), HLA-B*2702 (8% in AS and 5% in uSpA), HLA-B*2704 (1% in AS and 2.5% in uSpA) and HLA-B*2713 (1% in AS). Among the 111 healthy controls, 80% presented HLA-B*2705, followed by HLA-B*2702 in 10%, HLA-B*2703 in 6%, HLA-B*2707 in 3% and HLA-B*2713 in 1%. Concluding, in the HLA-B*27 positive patients with RS in this study there was predominance of HLA-B*2705 allele, in a lower frequency than that observed in patients with other spondyloarthropathies and healthy controls.

Efeitos da atividade física sobre equilíbrio, risco de quedas e função cognitiva de idosos com demência de Alzheimer: Salma Stéphany Soleman Hernandez. -

The Alzheimer’s dementia represents a clinical condition inherent to many chronic and neurodegenerative diseases that are usually related to a decline in the cognitive and physical functions. The objective of this experimental design research was to analyze the effects of a regular and systemized physical activity program over the cognitive functions, balance and risk of falls of elderly with Alzheimer’s Dementia (DA). The sample was made of 16 elderly with DA, distributed in two groups: a) intervention group – GI (9 subjects that had participated in a program of physical activity, that consisted of 3 weekly sessions of 60 minutes each, in alternated days and with a duration of 6 months); b) control group – GC (7 subjects that did not participate in the program of physical activity). Both groups maintained the doctoral and pharmacological assistance routine. The subjects passed through two different evaluations (pre and post-intervention) the questionnaire (Mini-exam of Mental State for cognitive functions) and motor tests (Berg Functional Balance Scale – EEFB, Timed Up-and-Go (TUG) time (TUGs) and steps (TUGp) and the test of agility and dynamic balance (AGILEQ) of the American Alliance for Health, Physical Education Recreation and Dance for elderly). The obtained results were, respectively in the pre and post-intervention moments: a) AGILEQ (GI = 39,1 ± 10,2 and 38,4 ± 8,9 and GC = 45,6 ± 16,7 and 59,9 ± 22,0 seconds) with the statistically interaction significant (ANOVA two-way; F1,14 = 32,07; p=0,01) between groups and moments; b) TUGs (GI = 9,8 ± 2,5 and 9,5 ± 3,3 and GC = 10,6 ± 4,5 and 12,7 ± 7,3 seconds) the test UMann Whitney did not appoint any significant differences between the groups in the post-intervention moment, however the analyzes of Wilcoxon evidenced a ...(Complete abstract click electronic access below)

Efeito do tipo de adesivo e do seu mecanismo de ativação, assim como da viscosidade da resina composta, na resistência de união à dentina antes e após envelhecimento artificial

Pós-graduação em Odontologia Restauradora - ICT

Longitudinal evaluation of bond strength to enamel of dental adhesive systems associated with Nd:YAG laser

Objectives: This study evaluated the durability of bond strength to enamel using total-etch (Single Bond/SB) and self-etch (Clearfil SE Bond/CSEB) adhesives associated with neody-mium: yttrium-aluminu- garnet (Nd:YAG) laser irradiation through the uncured adhesives.Methods: Bovine incisors were worn to expose an area of enamel and were divided into four groups: group 1 (control) SB + polymerization; group 2 (control) CSEB + polymerization; group 3 (laser) - B + Nd:YAG laser (174.16 J/cm(2)) + polymerization; and group 4 (laser) CSEB + Nd:YAG (174.16 J/cm(2)) + polymerization. Blocks of composite were fabricated and stored for 24 hours or 12 months, sectioned into beams, and submitted to microtensile tests. Results were analyzed by three-way analysis of variance (ANOVA) (adhesive, technique, and storage time) and Tukey tests.Results: ANOVA revealed significant differences for adhesive 3 technique and technique 3 storage time (p<0.05). The mean values (MPa) for interaction adhesive x technique (standard deviation) were as follows: SB/control = 35.78 (6.04)a; SB/laser = 26.40 (7.25)b, CSEB/control = 26.32 (5.71)b, CSEB/laser = 23.90 (7.49)b. For interaction technique x storage time the mean values were as follows: control/24 hours = 32.58 (6.49)a; control/12 months = 29.52 (8.38)a; laser/24 hours = 29.37 (5.71)a; laser/12 months = 20.92 (6.5)b. Groups with the same letters showed no statistically significant differences.Conclusion: Scanning electron microscope analysis showed evident areas of micromorphological alterations in lased samples after 12 months of water storage. Nd: YAG laser irradiation of enamel through unpolymerized totaletch adhesive significantly reduced bond strength compared with the control. Bond strength decreased when enamel samples irradiated with Nd: YAG laser through unpolymerized adhesives were stored in water for 12 months.

Avaliação da resistência de união da resina composta ao esmalte desmineralizado submetido à remineralização e infiltração resinosa de lesão de cárie

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Plumage variability and taxonomy of the Capped Seedeater Sporophila bouvreuil (Aves: Passeriformes: Emberizidae)

The species Sporophila bouvreuil comprises four subspecies: S. b. bouvreuil, S. b. pileata, S. b. saturata and S. b. crypta. The males of each subspecies differ in plumage whereas the females and juveniles are very similar and difficult to identify to subspecies. Here we use external morphological characters, mostly plumage, to examine the validity of the subspecies. A total of 209 specimens was examined (131 S. b. bouvreuil, 29 S. b. crypta, 43 S. b. pileata and 6 S. b. saturata). Although morphological measurements did not separate any taxa, plumage patterns support recognition of two taxonomic units, one of birds having reddish brown male plumage and the other of birds with grayish to white male plumage. Discrete diagnostic characters and sympatry in SE Brazil allow separation of Sporophila pileata (Sclater 1864) from S. bouvreuil (Muller 1776). On the other hand, S. b. saturata Hellmayr 1904 and S. b. crypta Sick 1968 should be considered synonyms of S. bouvreuil.

Determination of decimal reduction time (D value) of chemical agents used in hospitals for disinfection purposes

Abstract Background Prior to the selection of disinfectants for low, intermediate and high (sterilizing) levels, the decimal reduction time, D-value, for the most common and persistent bacteria identified at a health care facility should be determined. Methods The D-value was determined by inoculating 100 mL of disinfecting solution with 1 mL of a bacterial suspension (104 – 105 CFU/mL for vegetative and spore forms). At regular intervals, 1 mL aliquots of this mixture were transferred to 8 mL of growth media containing a neutralizing agent, and incubated at optimal conditions for the microorganism. Results The highest D-values for various bacteria were determined for the following solutions: (i) 0.1% sodium dichloroisocyanurate (pH 7.0) – E. coli and A. calcoaceticus (D = 5.9 min); (ii) sodium hypochlorite (pH 7.0) at 0.025% for B. stearothermophilus (D = 24 min), E. coli and E. cloacae (D = 7.5 min); at 0.05% for B. stearothermophilus (D = 9.4 min) and E. coli (D = 6.1 min) and 0.1% for B. stearothermophilus (D = 3.5 min) and B. subtilis (D = 3.2 min); (iii) 2.0% glutaraldehyde (pH 7.4) – B. stearothermophilus, B. subtilis (D = 25 min) and E. coli (D = 7.1 min); (iv) 0.5% formaldehyde (pH 6.5) – B. subtilis (D = 11.8 min), B. stearothermophilus (D = 10.9 min) and A. calcoaceticus (D = 5.2 min); (v) 2.0% chlorhexidine (pH 6.2) – B. stearothermophilus (D = 9.1 min), and at 0.4% for E. cloacae (D = 8.3 min); (vi) 1.0% Minncare® (peracetic acid and hydrogen peroxide, pH 2.3) – B. stearothermophilus (D = 9.1 min) and E. coli (D = 6.7 min). Conclusions The suspension studies were an indication of the disinfectant efficacy on a surface. The data in this study reflect the formulations used and may vary from product to product. The expected effectiveness from the studied formulations showed that the tested agents can be recommended for surface disinfection as stated in present guidelines and emphasizes the importance and need to develop routine and novel programs to evaluate product utility.

Analisi e valutazione delle performance acustiche degli aeromobili nella fase di atterraggio

Nella tesi si analizzano le principali fonti del rumore aeronautico, lo stato dell'arte dal punto di vista normativo, tecnologico e procedurale. Si analizza lo stato dell'arte anche riguardo alla classificazione degli aeromobili, proponendo un nuovo indice prestazionale in alternativa a quello indicato dalla metodologia di certificazione (AC36-ICAO) Allo scopo di diminuire l'impatto acustico degli aeromobili in fase di atterraggio, si analizzano col programma INM i benefici di procedure CDA a 3° rispetto alle procedure tradizionali e, di seguito di procedure CDA ad angoli maggiori in termini di riduzione di lunghezza e di area delle isofoniche SEL85, SEL80 e SEL75.

Patogeni e zecche vettrici: studio epidemiologico in parchi pubblici dell'Emilia Romagna

Le malattie trasmesse da zecche sono un importante problema sia per la salute animale che per quella umana e negli ultimi decenni hanno aumentato notevolmente la loro diffusione, in seguito ai cambiamenti climatici, che hanno permesso la distribuzione delle zecche in aree prima non interessate. Per tale motivo si è deciso di effettuare un’indagine sulla diffusione delle zecche e sui patogeni da loro trasmessi, mediante campionamenti sia a livello ambientale, sia su animali e umani infestati in quattro siti di tre parchi dell’Emilia Romagna, dove non risultavano precedenti segnalazioni, nelle province di Bologna e Ravenna, da Aprile a Ottobre 2010. In totale sono state raccolte 8212 zecche. Dall’ambiente sono state campionate 6734 larve, 1344 ninfe, 61 adulti; dagli animali e da persone sono stati raccolti 68 adulti e 5 ninfe appartenenti a diverse specie di Ixodidae. Sono state condotte analisi sull’abbondanza delle zecche nelle diverse aree di raccolta, in funzione del periodo di campionamento, della temperatura e dell’umidità relativa misurata a 5 cm dal suolo al momento del campionamento e della vegetazione. Su tutti gli individui adulti e su pool di ninfe e di larve, per un totale di 393 campioni, sono state condotte analisi di tipo molecolare per la ricerca di piroplasmi, Anaplasma phagocytophilum e Borrelia burgdorferi s.l. Attraverso la PCR e il sequenziamento, è emerso che il 7,6% dei campioni era positivo per piroplasmi, tra i quali è stata riscontrata anche la presenza delle specie zoonosiche Babesia EU1 e B. divergens. La real-time PCR eseguita solo sui campioni costituiti da ninfe e adulti ha evidenziato una prevalenza del 9,2% per A. phagocytophilum e del 21,6% per B. burgdorferi s.l. Su questi patogeni sono state quindi condotte analisi di tipo filogenetico. In alcuni campioni sono state riscontrate coinfezioni con combinazioni di due patogeni contemporaneamente.

Lichtsammler hinter Glas : Stabilisierung und Funktionalisierung des pflanzlichen Hauptlichtsammelkomplexes (LHCII) durch biomineralische Einbettung in Nanopartikel

Der Haupt-Lichtsammelkomplex des Fotosystems II (LHCII) setzt sich aus einem Proteinanteil und nicht-kovalent gebundenen Pigmenten – 8 Chlorophyll a, 6 Chlorophyll b und 4 Carotinoide - zusammen. Er assembliert in vivo zu einem Trimer, in dem die Monomereinheiten ebenfalls nicht-kovalent miteinander wechselwirken. Die ausgesprochen hohe Farbstoffdichte und die Tatsache, dass der Komplex rekombinant hergestellt werden kann, machen den LHCII zu einem interessanten Kandidaten für technische Anwendungen wie einer Farbstoffsolarzelle. Allerdings muss hierzu seine thermische Stabilität drastisch erhöht werden.rnDer Einschluss von Proteinen/Enzymen in Silikat erhöht deren Stabilität gegenüber Hitze signifikant. LHCII sollte als erster rekombinanter Membranproteinkomplex mittels kovalent verbundener, polykationischen Sequenzen in Silikat eingeschlossen werden. Hierzu wurde der Komplex auf zwei Weisen polykationisch modifiziert: Auf Genebene wurde die Sequenz des R5-Peptids in den N-terminalen Bereich des LHCP-Gens eingeführt und ein Protokoll zur Überexpression, Rekonstitution und Trimerisierung etabliert. Außerdem wurde eine kovalente Modifikation des trimeren LHCII mit dem Arginin-reichen Protamin über heterobifunktionelle Crosslinker entwickelt. Beide resultierenden LHCII-Derivate waren in der Lage, Silikat autogen zu fällen. Die Stabilisierung der so in Silikat präzipitierten Komplexe war jedoch deutlich geringer als bei nicht-modifizierten Komplexen, die durch eine Spermin-induzierte Copräzipitation eingeschlossenen wurden. Dabei zeigte sich, dass für den Anteil der eingebauten Komplexe und das Ausmaß an Stabilisierung die Größe und klare partikuläre Struktur des Silikats entscheidend ist. Kleine Partikel mit einem Durchmesser von etwa 20 nm führten zu einem Einbau von rund 75 % der Komplexe, und mehr als 80 % des Energietransfers innerhalb des Komplexes blieben erhalten, wenn für 24 Stunden bei 50°C inkubiert wurde. Nicht in Silikat eingeschlossene Komplexe verloren bei 50°C ihren Komplex-internen Energietransfer binnen weniger Minuten. Es war dabei unerheblich, ob die Partikelgröße durch die Wahl des Puffers und des entsprechenden pH-Wertes, oder aber durch Variation des Spermin-zu-Kieselsäure-Verhältnisses erreicht wurde. Wurden die polykationisch veränderten Komplexe in solchen Copräzipitationen verwendet, so erhöhte sich der Anteil an eingebauten Komplexen auf über 90 %, jedoch wurde nur bei der R5-modifizierten Variante vergleichbare Ausmaße an Stabilisierung erreicht. Ein noch höherer Anteil an Komplexen wurde in das Silikatpellet eingebaut, wenn LHCII kovalent mit Silanolgruppen modifiziert wurde (95 %); jedoch war das Ausmaß der Stabilisierung wiederum geringer als bei einer Copräzipitation. Die analysierten Fällungssysteme waren außerdem in der Lage, Titandioxid zu fällen, wobei der Komplex in dieses eingebaut wurde. Allerdings muss das Stabilisierungspotential hier noch untersucht werden. Innerhalb eines Silikatpräzipitats aggregierten die Komplexe nicht, zeigten aber einen inter-trimeren Energietransfer, der sehr wahrscheinlich auf einem Förster Resonanz Mechanismus basiert. rnDies und das hohe Maß an Stabilisierung eröffnen neue Möglichkeiten, rekombinanten LHCII in technischen Applikationen als Lichtsammelkomponente zu verwenden.rn