Heritability of left ventricular structure and function in Caucasian families.

AIMS: The aim of this study was to investigate the heritability as well as genetic and environmental correlations of left ventricular (LV) structural and functional traits in complex pedigrees of a Caucasian population. METHODS AND RESULTS: We randomly recruited 459 white European subjects from 52 families (50% women; mean age 45 years). LV structure was measured by M-mode and 2D echocardiography and LV function was measured by conventional Doppler and tissue Doppler imaging (TDI). Other measurements included blood pressure, anthropometric, and biochemical measurements. We estimated the heritability of LV traits while adjusting for covariables, including sex, age, body height and weight, systolic and diastolic blood pressures, and heart rate. With full adjustment, heritability of LV mass was 0.23 (P= 0.025). The TDI-derived mitral annular velocities Ea and Aa showed moderate heritability (h(2)= 0.36 and 0.53, respectively), whereas the mitral inflow A peak had weak heritability (h(2) = 0.25) and the E peak was not heritable (h(2) = 0.11). We partitioned the total phenotypic correlation when it reached significance, into a genetic and an environmental component. The genetic correlations were 0.61 between the E and Ea peaks and 0.90 between the A and Aa peaks. CONCLUSION: Our study demonstrated moderate heritability for LV mass as well as the mitral annular Ea and Aa peaks. We also found significant genetic correlations between the E and Ea peaks and between the A and Aa peaks. Our current findings support the ongoing research to map and detect genetic variants that contribute to the variation in LV mass and other LV structural and functional phenotypes.

Microbial biomass and soil chemical properties under different land use systems in northeastern Pará

The increase in agricultural production in the Brazilian Amazon region is mostly a result of the agricultural frontier expansion, into areas previously influenced by humans or of native vegetation. At the same time, burning is still used to clear areas in small-scale agricultural systems, leading to a loss of the soil productive capacity shortly after, forcing the opening of new areas. This study had the objective of evaluating the effect of soil preparation methods that involve plant residue shredding, left on the surface or incorporated to the soil, with or without chemical fertilization, on the soil chemical and biological properties. The experiment was conducted in 1995, in an experimental field of Yellow Latosol (Oxisol) of the Embrapa Amazônia Oriental, northeastern Pará (Brazil). The experiment was arranged in randomized blocks, in a 2x6 factorial design, with two management systems and six treatments evaluated twice. The management systems consisted of rice (Oriza sativa), followed by cowpea (Vigna unguiculata) with manioc (Manihot esculenta). In the first system the crops were planted in two consecutive cycles, followed by a three-year fallow period (natural regrowth); the second system consisted of one cultivation cycle and was left fallow for three years. The following treatments were applied to the secondary forest vegetation: slash and burn, fertilized with NPK (Q+NPK); slash and burn, without fertilizer NPK (Q-NPK); cutting and shredding, leaving the residues on the soil surface, fertilized with NPK (C+NPK); cutting and shredding, leaving residues on the soil surface, without fertilizer (C-NPK); cutting and shredding, with residue incorporation and fertilized with NPK (I+NPK); cutting and shredding, with residue incorporation and without NPK fertilizer (I-NPK). The soil was sampled in the rainier season (April 2006) and in the drier season (September 2006), in the 0-0.1 m layer. From each plot, 10 simple samples were collected in order to generate a composite sample. In the more intensive management system the contents of microbial C (Cmic) and microbial N (Nmic) were higher, while the C (Corg) level was higher in the less intensive system. The treatments with highest Cmic and Nmic levels were those with cutting, shredding and distribution of biomass on the soil surface. Under both management systems, the chemical characteristics were in ranges that classify the soil as little fertile, although P and K (in the rainy season) were higher in the less intensive management system.

Role of CLOCK and circadian rhythms in calcium homeostasis

Le maintien d'une concentration sanguine constante de calcium est d'une importance cruciale et trois organes participent à la balance calcique normale : les reins, les intestins et les os. La concentration plasmatique de calcium est strictement régulée par l'hormone parathyroïdienne (PTH) et par la vitamine D. Des variations circadiennes de la PTH, de la vitamine D ainsi que du calcium plasmatique ont été décrites précédemment chez l'humain ainsi que chez le rat. Ces rythmes de PTH dans le sérum sont importants pour la régulation du remodelage de l'os. En effet, il a été montré chez les souris C57BL/6J que des injections de PTH une fois par jour mènent à une augmentation de la densité minérale de l'os alors que l'infusion en continu de PTH est associée à une diminution de cette densité. La vitamine D joue également un rôle fondamental dans la physiologie osseuse, car un déficit en vitamine D peut conduire à une ostéomalacie. Cependant la fonction des oscillations de vitamine D au niveau de l'homéostasie osseuse reste inconnue. L'horloge circadienne est un système interne de contrôle biologique du temps générant des rythmes de 24 heures dans l'expression des gènes, ainsi que dans la physiologie et le comportement. Ce contrôle s'opère par des boucles rétroactives positives et négatives de l'expression de gènes circadiens tels que CLOCK, BMAL1, CRY1 et 2 ou PERI et 2. Dans ce travail, nous avons émis l'hypothèse que l'homéostasie calcique est sous le contrôle de l'horloge circadienne. Dans un premier temps, nous avons montré chez les souris C57BL/6J des variations journalières des concentrations de calcium, de PTH et de vitamine D dans le sang, ainsi que de calcium dans les urines. Nous avons également démontré des changements au niveau de l'expression rénale des gènes importants dans l'homéostasie du calcium, tant au niveau de l'ARN messager que des protéines. Ensuite, pour analyser le rôle du système de l'horloge circadienne dans l'homéostasie du calcium, nous avons étudié des souris dans lesquelles a été supprimé le gène CLOCK crucial pour la fonction de l'horloge et nous avons comparé ces souris à des souris de type sauvage de même portée. Les souris CLOCK-I- étaient hypercalciuriques à chaque moment de la journée. Cependant le rythme circadien de l'excrétion de calcium était préservé. Le taux de calcium plasmatique ne différait pas entre les génotypes, mais les souris CLOCK -/- ne montraient pas de variations journalières de ce paramètre. Une perte du rythme journalier était également observée pour les niveaux de vitamine D, perte qui pourrait être une cause de l'altération de la micro-architecture osseuse révélée chez les souris CLOCK-/-. En effet, ces souris montrent une diminution du nombre de trabécules, de leur volume ainsi que de leur surface, ce qui suggère la présence d'ostéoporose. Nous avons également trouvé que le rythme de l'expression de l'ARN messager de CYP27B1 était aboli dans les reins des souris CLOCK -/-, ce qui peut expliquer l'altération du rythme de la vitamine D. Les taux sanguins de PTH étaient comparables entre les souris CLOCK -/- et de type sauvage. Dans les reins, une augmentation de l'expression de l'ARN messager de TRPV5 et NCX1 a été constatée, ce qui suggérerait une augmentation de la réabsorption de calcium dans le tubule convoluté distal et dans le tubule connecteur. Dans les intestins, la réabsorption calcique était diminuée, chez les souris CLOCK-I-, fait confirmé par une diminution des niveaux d'ARN messager de TRPV6 et PMCAL. En résumé, la suppression du gène CLOCK chez les souris a conduit à une hypercalciurie, une altération du rythme des taux plasmatiques de calcium et de vitamine D et à une détérioration de l'architecture osseuse. Pour conclure, ces résultats montrent que l'horloge circadienne est essentielle à l'homéostasie calcique ainsi qu'à la physiologie des os. - L'ostéoporose affecte environ 22 millions de femmes et 5.5 millions d'hommes en Europe, réduisant significativement leur qualité de vie et a causé 3.5 millions de nouvelles fractures en 2010. Les dépenses totales liées à ces fractures ont atteint 37 milliards d'euro et ce coût devrait augmenter de 25% d'ici à 2025. Le nombre de nouvelles fractures dues à l'ostéoporose à travers le monde est estimé à environ 1000 par heure. Parmi les causes de l'ostéoporose, le déficit én calcium et/ou en vitamine D joue un rôle important, mais il existe également des causes génétiques ou liées à des facteurs comme les hormones sexuelles (estrogènes, testostérone), l'âge, le tabac, le poids corporel, certains médicaments,... La vie est rythmique : ceci est dû à l'alternance naturelle du jour et de la nuit et de ses effets sur le corps. La prise alimentaire, par exemple, est un processus qui a lieu pendant la phase active, qui est prévisible (il se produit toujours au même moment) et qui peut être anticipé par le corps. Pour cela, une horloge interne est présente dans chaque cellule du corps et est synchronisée par la lumière du jour, entre autres stimuli. Cette horloge indique la phase du jour et régule l'expression de gènes impliqués dans les différents processus qui nécessitent une anticipation. Pendant mon travail de thèse, je me suis demandé si des îythmes circadiens (c'est-à-dire d'une durée d'environ 24 heures et indépendants des stimuli externes) étaient observables'pour les gènes régulant les flux de calcium dans le corps et si l'interruption de ces rythmes pouvait mener à des altérations de la qualité de l'os. J'ai d'abord travaillé avec des souris normales et j'ai pu montrer la présence de rythmes au niveau du calcium sanguin et urinaire, mais également au niveau des hormones et gènes qui contrôlent le métabolisme du calcium dans le corps, comme la vitamine D et l'hormone parathyroidienne. De manière intéressante, j'ai observé que la plupart de ces gènes ont un rythme synchronisé. J'ai ensuite utilisé un modèle de souris dans lequel l'horloge interne a été génétiquement invalidée et j'ai montré que ces souris présentent une augmentation de leur excrétion urinaire de calcium et un rythme circadien altéré de la vitamine D dans le sang. Ces souris absorbent aussi moins bien le calcium intestinal et présentent une ostéoporose marquée. Ce travail montre donc que l'horloge interne est nécessaire pour établir un rythme circadiens de certains facteurs influant les flux de calcium dans l'organisme, comme la vitamine D, et que la perturbation de ces rythmes mène à une dérégulation du métabolisme osseux. Ainsi, la perturbation de l'horloge interne peut causer une ostéoporose et une hypercalciurie qui pourraient aboutir à la formation de fractures et de calculs rénaux. L'extrapolation de ces observations chez l'homme ou à des changements plus subtiles des rythmes circadiens, comme le décalage horaire, restent à montrer. Cette recherche a démontré que les rythmes circadiens des mécanismes de régulation des flux de calcium dans l'organisme sont essentiels au maintien d'un squelette normal et suggère que les perturbations des rythmes circadiens pourraient être une nouvelle cause de l'ostéoporose. - Maintaining constant calcium concentration in the plasma is of a crucial importance and three organs participate in normal calcium balance - kidney, gut and bone. Plasma calcium concentration is strictly regulated by parathyroid hormone (PTH) and vitamin D. Circadian variations of PTH, vitamin D and plasma calcium were previously described in humans, as well as in rats. Rhythms in serum PTH are important for balanced bone remodelling. Indeed in C57BL/6J mice, PTH injection once per day leads to an increase in bone mineral density (BMD), whilst continuous infusion is associated with decreased BMD. Vitamin D also plays a crucial role in bone physiology, since the deficiency in vitamin D can lead to rickets/osteomalacia. However, the role of vitamin D rhythms in bone homeostasis remains unknown. The circadian clock is an. internal time-keeping system generating rhythms in gene expression with 24h periodicity, in physiology and in behaviour. It is operated by positive- and negative-feedback loops of circadian genes, such as CLOCK, BMAL1, CRY1 and 2 or PERI and 2. In this work, we hypothesized, that calcium homeostasis is under the control of the circadian clock. First, we showed daily variations in urinary calcium and serum calcium, PTH and l,25(OH)2 vitamin D, together with renal mRNA and protein levels of genes involved in calcium homeostasis in C57BL/6J mice. Second, and to investigate the role of the circadian clock system in calcium handling, we studied mice lacking the gene CLOCK crucial for fonction of the clock system and compared them to the WT littermates. CLOCK-/- mice were hypercalciuric at all timepoints of the day. However, the circadian rhythm of calcium excretion was preserved. Serum calcium levels did not differ between the genotypes, but CLOCK-/- mice did not exhibit daily variation for this parameter. Loss of rhythm was observed also for serum l,25(OH)2 vitamin D levels, which may be one of the causes of altered bone microarchitecture that was revealed in CLOCK-/- mice. They displayed increased trabecular separation and decreased trabecular number, trabecular bone volume and trabecular bone surface, suggestive of osteoporosis. We found that the rhythm of the mRNA expression of CYP27B1 was abolished in the kidney of CLOCK-/- mice, which could induce the altered rhythm of l,25(OH)2 vitamin. Serum PTH levels were comparable between CLOCK-/- and WT mice. In the kidney, increased mRNA expression of TRPV5 and NCX1 suggests increased calcium reabsorption in the distal convoluted and connecting tubule. In the gut, intestinal calcium absorption was decreased in CLOCK¬/- mice, confirmed by decreased mRNA levels of TRPV6 and PMCA1. In summary, deletion of the CLOCK gene in mice conducts to hypercalciuria, alteration of the rhythm in serum calcium and l,25(OH)2D levels, and impainnent of their bone microarchitecture. In conclusion, these data show that the circadian clock system is essential in calcium homeostasis and bone physiology.

Model for managing non-core ideas to new companies, products and services in a Finnish forest company

Suomalainen metsäteollisuus on muutoksen partaalla. Uutisissa on nähty miten metsäyrityksen sulkevat tehtaita ja paperikoneita. Suomalaisessa metsäteollisuudessa keskitytään tällä hetkellä lähinnä kulujen alentamiseen ja tuottavuuden parantamiseen. Edellytyssille, että suomalainen metsäteollisuus pysyy kilpailukykyisenä, ovat kuitenkinuudet innovaatiot ja toimialojen välinen yhteistyö. Työn tavoitteena oli luoda toimintamalli UPM-Kymmene Oyj:lle, minkä avulla ydinliiketoimintaan kuulumattomat tuote- ja palveluideat saataisiin hyödynnettyä. Aihe on erittäin ajankohtainen, mikäli halutaan pitää tuotanto jatkossakin Suomessa. Luotumalli painottaa pk-sektorin roolia ja potentiaalia kehittää UPM-Kymmeneltä peräisin olevia ja heidän ydinliiketointaan kuulumattomista tuote ja palveluideoistauusia yrityksiä, tuotteita ja palveluita. Malli edustaa uudenlaista ajattelutapaa ja sen käyttöönotto vaatii perinteisen yrityskulttuurin uudistamista UPM-Kymmenessä.

Novel Robot Solutions for Carrying out Field Joint Welding and Machining in the Assembly of the Vacuum Vessel of ITER

It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.

GLOBAL AND LOCAL REACTIVITY DESCRIPTORS FOR PICLORAM HERBICIDE: A THEORETICAL QUANTUM STUDY

In this work, we studied the reactivity of picloram in the aqueous phase at the B3LYP/6-311++G(2d,2p) and MP2/6-311++G(2d,2p) levels of theory through global and local reactivity descriptors. The results obtained at the MP2 level indicate that the cationic form of picloram exhibits the highest hardness while the anionic form is the most nucleophilic. From the Fukui function values, the most reactive site for electrophilic and free radical attacks are on the nitrogen in the pyridine ring. The more reactive sites for nucleophilic attacks are located on the nitrogen atom of the amide group and on the carbon atoms located at positions 2 and 3 in the pyridine ring.

Application of cutting fluids in machining processes

In the last decade a lot has been discussed about the suitability of using cutting fluid in abundance to cool and lubricate machining processes. The use of cutting fluid generally causes economy of tools and it becomes easier to keep tight tolerances and to maintain workpiece surface properties without damages. In the other hand, it brings also some problems, like fluid residuals and human diseases. Because of them some alternatives has been sought to minimise or even avoid the use of cutting fluid in machining operations. Some of these alternatives are dry cutting and cutting with minimum quantity of fluid (MQF). The main goal of this work is to discuss these tendencies. Therefore, topics like kinds and methods of applications of modern cutting fluids and what are new in this area will unavoidably be considered. MQF and dry cutting techniques, their applications and where it is not possible to apply them will also be focused. To exemplify the topics, this work will describe some of the researches been developed in two important Brazilian Universities: State University of Campinas (UNICAMP) and Federal University of Uberlândia (UFU).

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Hierarchy and Expansiveness in Two-Dimensional Subshifts of Finite Type

Subshifts are sets of configurations over an infinite grid defined by a set of forbidden patterns. In this thesis, we study two-dimensional subshifts offinite type (2D SFTs), where the underlying grid is Z2 and the set of for-bidden patterns is finite. We are mainly interested in the interplay between the computational power of 2D SFTs and their geometry, examined through the concept of expansive subdynamics. 2D SFTs with expansive directions form an interesting and natural class of subshifts that lie between dimensions 1 and 2. An SFT that has only one non-expansive direction is called extremely expansive. We prove that in many aspects, extremely expansive 2D SFTs display the totality of behaviours of general 2D SFTs. For example, we construct an aperiodic extremely expansive 2D SFT and we prove that the emptiness problem is undecidable even when restricted to the class of extremely expansive 2D SFTs. We also prove that every Medvedev class contains an extremely expansive 2D SFT and we provide a characterization of the sets of directions that can be the set of non-expansive directions of a 2D SFT. Finally, we prove that for every computable sequence of 2D SFTs with an expansive direction, there exists a universal object that simulates all of the elements of the sequence. We use the so called hierarchical, self-simulating or fixed-point method for constructing 2D SFTs which has been previously used by Ga´cs, Durand, Romashchenko and Shen.

Extracting Ramachandran torsional angle distributions from 2D NMR data using Tikhonov regularization /

Solid state nuclear magnetic resonance (NMR) spectroscopy is a powerful technique for studying structural and dynamical properties of disordered and partially ordered materials, such as glasses, polymers, liquid crystals, and biological materials. In particular, twodimensional( 2D) NMR methods such as ^^C-^^C correlation spectroscopy under the magicangle- spinning (MAS) conditions have been used to measure structural constraints on the secondary structure of proteins and polypeptides. Amyloid fibrils implicated in a broad class of diseases such as Alzheimer's are known to contain a particular repeating structural motif, called a /5-sheet. However, the details of such structures are poorly understood, primarily because the structural constraints extracted from the 2D NMR data in the form of the so-called Ramachandran (backbone torsion) angle distributions, g{^,'4)), are strongly model-dependent. Inverse theory methods are used to extract Ramachandran angle distributions from a set of 2D MAS and constant-time double-quantum-filtered dipolar recoupling (CTDQFD) data. This is a vastly underdetermined problem, and the stability of the inverse mapping is problematic. Tikhonov regularization is a well-known method of improving the stability of the inverse; in this work it is extended to use a new regularization functional based on the Laplacian rather than on the norm of the function itself. In this way, one makes use of the inherently two-dimensional nature of the underlying Ramachandran maps. In addition, a modification of the existing numerical procedure is performed, as appropriate for an underdetermined inverse problem. Stability of the algorithm with respect to the signal-to-noise (S/N) ratio is examined using a simulated data set. The results show excellent convergence to the true angle distribution function g{(j),ii) for the S/N ratio above 100.

Isolation and partial characterization of a complementary protein from the mycoparasite, Piptocephalis virginiana, which specifically binds to two glycoproteins b and c of the host cell surface

Presence of surface glycoprotein in Piptocephalis virginiana that recognizes the host glycoproteins band c, reported earlier from our laboratory, was detected by immunofluorescence microscopy. Germinated spores of P. virginiana treated with Mortierella pusilla cell wall protein extract, primary antibodies prepared against glycoproteins band c and FITC-goat anti-rabbit IgG conjugate showed fluorescence. This indicated that on the surfaces of the biotrophic mycoparasite P. virginiana , there might be a complementary molecule which recognizes the glycoproteins band c from M. pusilla. Immunobinding analysis identified a glycoprotein of Mr 100 kDa from the mycoparasite which binds with the host glycoproteins band c, separately as well as collectively. Purification of this glycoprotein was achieved by (i) 60% ammonium sulfate precipitation, (ii) followed by heat treatment, and (iii) Sephadex G-IOO gel filtration. The glycoprotein was isolated by preparative polyacrylamide gel electrophoresis by cutting and elution. The purity of the protein ·was ascertained by SDS-PAGE and Western blot analysis. Positive reaction to periodic acid-Schiff reagent revealed the glycoprotein nature of this 100 kDa protein. Mannose was identified as a major sugar component of this glycoprotein by using a BoehringerMannheim Glycan Differentiation Kit. Electrophoretically purified glycoprotein was used to raIse polyclonal antibody in rabbit. The specificity of the antibody was determined by dot-immunobinding test and western-blot analysis. Immunofluorescence mIcroscopy revealed surface localization of the protein on the germ tube of Piptocephalis virginiana. Fluorescence was also observed at the surfaceJ of the germinated spores and hyphae of the host, M. pusilla after treatment with complementary protein from P. virginiana, primary antibody prepared against the complementary protein and FITC-goat anti-rabbit IgG conjugate.

On Chaos and Fractals in General Topological Spaces

The present study on chaos and fractals in general topological spaces. Chaos theory originated with the work of Edward Lorenz. The phenomenon which changes order into disorder is known as chaos. Theory of fractals has its origin with the frame work of Benoit Mandelbrot in 1977. Fractals are irregular objects. In this study different properties of topological entropy in chaos spaces are studied, which also include hyper spaces. Topological entropy is a measures to determine the complexity of the space, and compare different chaos spaces. The concept of fractals can’t be extended to general topological space fast it involves Hausdorff dimensions. The relations between hausdorff dimension and packing dimension. Regular sets in Metric spaces using packing measures, regular sets were defined in IR” using Hausdorff measures. In this study some properties of self similar sets and partial self similar sets. We can associate a directed graph to each partial selfsimilar set. Dimension properties of partial self similar sets are studied using this graph. Introduce superself similar sets as a generalization of self similar sets and also prove that chaotic self similar self are dense in hyper space. The study concludes some relationships between different kinds of dimension and fractals. By defining regular sets through packing dimension in the same way as regular sets defined by K. Falconer through Hausdorff dimension, and different properties of regular sets also.

A Faster 2D Technique for the design of Combinational Digital Circuits Using Genetic Algorithm

Combinational digital circuits can be evolved automatically using Genetic Algorithms (GA). Until recently this technique used linear chromosomes and and one dimensional crossover and mutation operators. In this paper, a new method for representing combinational digital circuits as 2 Dimensional (2D) chromosomes and suitable 2D crossover and mutation techniques has been proposed. By using this method, the convergence speed of GA can be increased significantly compared to the conventional methods. Moreover, the 2D representation and crossover operation provides the designer with better visualization of the evolved circuits. In addition to this, a technique to display automatically the evolved circuits has been developed with the help of MATLAB

Evaluación características operativas : ecografía 2d y doppler color para diagnóstico de acretismo placentario, clínica universitaria Colombia, Bogotá

La placenta ácreta es la implantación anómala de la placenta en la pared uterina. Se presenta en 0.9% de todos los embarazos; actualmente es una de las causas más importantes de morbimortalidad materna. Ecografía 2D y Doppler placentario son métodos diagnósticos de primera y segunda línea. Objetivo: Evaluar la utilidad diagnóstica de ecográfica 2D y Doppler color Placentario para diagnóstico de acretismo placentario en gestantes con factores de riesgo comparándolos con diagnóstico clínico e histopatológico; y determinar incidencia de acretismo placentario en población asistente a Clínica Universitaria Colombia. Metodología: Estudio de evaluación de tecnología diagnóstica. Entre Agosto a octubre 2011 se incluyeron 137 gestantes entre 24 y 40 semanas de gestación con factores de riesgo para acretismo placentario. El desempeño diagnóstico de las pruebas se determinará por sensibilidad, especificidad, valores predictivos positivo y negativo. Las características demográficas de las pacientes y resultados neonatales se analizaron mediante proporción, media y rango. Resultados: En un grupo de 137 pacientes con factores de riesgo de acretismo placentario analizadas se obtuvo el dato de 119 en cuanto a la finalización del embarazo. Se observaron 4 casos con diagnóstico clínico e histopatológico de acretismo placentario, evidenciando una prevalencia del 2,9%. La ecografía 2D y Doppler en la detección de acretismo placentario con un nivel de confianza del 95%, presentaron sensibilidad del 100% (IC95% 87,5-100) y especificidad de 100% (IC95% 99,6-100). Conclusión: Con los datos analizados registramos una incidencia de acretismo placentario de 4 en 132 pacientes. Revisión de literatura sustenta la necesidad de realización diagnostica prenatal que impacte en la morbimortalidad materna y fetal, haciendo necesario la evaluación diagnostica valida de herramientas como el Eco 2D y Doppler color en población a riesgo.