Econometric models of Finnish non-industrial private forest owners' timber supply and timber stock

This dissertation examines the short- and long-run impacts of timber prices and other factors affecting NIPF owners' timber harvesting and timber stocking decisions. The utility-based Faustmann model provides testable hypotheses of the exogenous variables retained in the timber supply analysis. The timber stock function, derived from a two-period biomass harvesting model, is estimated using a two-step GMM estimator based on balanced panel data from 1983 to 1991. Timber supply functions are estimated using a Tobit model adjusted for heteroscedasticity and nonnormality of errors based on panel data from 1994 to 1998. Results show that if specification analysis of the Tobit model is ignored, inconsistency and biasedness can have a marked effect on parameter estimates. The empirical results show that owner's age is the single most important factor determining timber stock; timber price is the single most important factor in harvesting decision. The results of the timber supply estimations can be interpreted using utility-based Faustmann model of a forest owner who values a growing timber in situ.

Tracking and identifying wastewater toxicants and assessing their biodegradation products

Screening of wastewater effluents from municipal and industrial wastewater treatment plants with biotests showed that the treated wastewater effluents possess only minor acute toxic properties towards whole organisms (e.g. bacteria, algae, daphnia), if any. In vitro tests (sub-mitochondrial membranes and fish hepatocytes) were generally more susceptible to the effluents. Most of the effluents indicated the presence of hormonally active compounds, as the production of vitellogenin, an egg yolk precursor protein, was induced in fish hepatocytes exposed to wastewater. In addition, indications of slight genotoxic potential was found in one effluent concentrate with a recombinant bacteria test. Reverse electron transport (RET) of mitochondrial membranes was used as a model test to conduct effluent assessment followed by toxicant characterisations and identifications. Using a modified U.S. EPA Toxicity Identification Evaluation Phase I scheme and additional case-specific methods, the main compound in a pulp and paper mill effluent causing RET inhibition was characterised to be an organic, relatively hydrophilic high molecular weight (HMW) compound. The toxicant could be verified as HMW lignin by structural analyses using nuclear magnetic resonance. In the confirmation step commercial and in-house extracted lignin products were used. The possible toxicity related structures were characterised by statistical analysis of the chemical breakdown structures of laboratory-scale pulping and bleaching effluents and the toxicities of these effluents. Finally, the biological degradation of the identified toxicant and other wastewater constituents was evaluated using bioassays in combination with chemical analyses. Biological methods have not been used routinely in establishing effluent discharge limits in Finland. However, the biological effects observed in this study could not have been predicted using only routine physical and chemical effluent monitoring parameters. Therefore chemical parameters cannot be considered to be sufficient in controlling effluent discharges especially in case of unknown, possibly bioaccumulative, compounds that may be present in small concentrations and may cause chronic effects.

Local systems, global impacts : Using life cycle assessment to analyse the potential and constraints of industrial symbioses

Human activities extract and displace different substances and materials from the earth s crust, thus causing various environmental problems, such as climate change, acidification and eutrophication. As problems have become more complicated, more holistic measures that consider the origins and sources of pollutants have been called for. Industrial ecology is a field of science that forms a comprehensive framework for studying the interactions between the modern technological society and the environment. Industrial ecology considers humans and their technologies to be part of the natural environment, not separate from it. Industrial operations form natural systems that must also function as such within the constraints set by the biosphere. Industrial symbiosis (IS) is a central concept of industrial ecology. Industrial symbiosis studies look at the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are exchanged by the actors of the system, thereby reducing the consumption of virgin material and energy inputs and the generation of waste and emissions. Companies are seen as part of the chains of suppliers and consumers that resemble those of natural ecosystems. The aim of this study was to analyse the environmental performance of an industrial symbiosis based on pulp and paper production, taking into account life cycle impacts as well. Life Cycle Assessment (LCA) is a tool for quantitatively and systematically evaluating the environmental aspects of a product, technology or service throughout its whole life cycle. Moreover, the Natural Step Sustainability Principles formed a conceptual framework for assessing the environmental performance of the case study symbiosis (Paper I). The environmental performance of the case study symbiosis was compared to four counterfactual reference scenarios in which the actors of the symbiosis operated on their own. The research methods used were process-based life cycle assessment (LCA) (Papers II and III) and hybrid LCA, which combines both process and input-output LCA (Paper IV). The results showed that the environmental impacts caused by the extraction and processing of the materials and the energy used by the symbiosis were considerable. If only the direct emissions and resource use of the symbiosis had been considered, less than half of the total environmental impacts of the system would have been taken into account. When the results were compared with the counterfactual reference scenarios, the net environmental impacts of the symbiosis were smaller than those of the reference scenarios. The reduction in environmental impacts was mainly due to changes in the way energy was produced. However, the results are sensitive to the way the reference scenarios are defined. LCA is a useful tool for assessing the overall environmental performance of industrial symbioses. It is recommended that in addition to the direct effects, the upstream impacts should be taken into account as well when assessing the environmental performance of industrial symbioses. Industrial symbiosis should be seen as part of the process of improving the environmental performance of a system. In some cases, it may be more efficient, from an environmental point of view, to focus on supply chain management instead.  

Harvesting undelimbed Scots pine (Pinus sylvestris L.) from first thinnings for integrated production of kraft pulp and energy

The present study evaluates the feasibility of undelimbed Scots pine (Pinus sylvestris L.) for integrated production of pulp and energy in a kraft pulp mill from the technical, economic and environmental points of view, focusing on the potential of bundle harvesting. The feasibility of tree sections for pulp production was tested by conducting an industrial wood-handling experiment, laboratory cooking and bleaching trials, using conventional small-diameter Scots pine pulpwood as a reference. These trials showed that undelimbed Scots pine sections can be processed in favourable conditions as a blend with conventional small-diameter pulpwood without reducing the pulp quality. However, fibre losses at various phases of the process may increase when using undelimbed material. In the economic evaluation, both pulp production and wood procurement costs were considered, using the relative wood paying capability of a kraft pulp mill as a determinant. The calculations were made for three Scots pine first-thinning stands with the breast-height diameter of the removal (6 12 cm) as the main distinctive factor. The supply chains included in the comparison were based on cut-to-length harvesting, whole-tree harvesting and bundle harvesting (whole-tree bundling). With the current ratio of pulp and energy prices, the wood paying capability declines with an increase in the proportion of the energy fraction of the raw material. The supply system based on the cut-to-length method was the most efficient option, resulting in the highest residual value at stump in most cases. A decline in the pulp price and an increase in the energy price improved the competitiveness of the whole-tree systems. With short truck transportation distances and low pulp prices, however, the harvesting of loose whole trees can result in higher residual value at stump in small-diameter stands. While savings in transportation costs did not compensate for the high cutting and compaction costs by the second prototype of the bundle harvester, an increase in transportation distances improved its competitiveness. Since harvesting undelimbed assortments increases nutrient export from the site, which can affect soil productivity, the whole-tree alternatives included in the present study cannot be recommended on infertile peatlands and mineral soils. The harvesting of loose whole trees or bundled whole trees implies a reduction in protective logging residues and an increase in site traffic or payloads. These factors increase the risk of soil damage, especially on peat soils with poor bearing capacity. Within the wood procurement parameters which were examined, the CO2 emissions of the supply systems varied from 13 27 kg m3. Compaction of whole trees into bundles reduced emissions from transportation by 30 39%, but these reductions were insufficient to compensate for the increased emissions from cutting and compaction.

Renewable Energy and Climate Policies: Studies in the Forest and Energy Sector

‪This dissertation examines the impacts of energy and climate policies on the energy and forest sectors, focusing on the case of Finland. The thesis consists of an introduction article and four separate studies. The dissertation was motivated by the climate concern and the increasing demand of renewable energy. In particular, the renewable energy consumption and greenhouse gas emission reduction targets of the European Union were driving this work. In Finland, both forest and energy sectors are in key roles in achieving these targets. In fact, the separation between forest and energy sector is diminishing as the energy sector is utilizing increasing amounts of wood in energy production and as the forest sector is becoming more and more important energy producer.‬ ‪The objective of this dissertation is to find out and measure the impacts of climate and energy policies on the forest and energy sectors. In climate policy, the focus is on emissions trading, and in energy policy the dissertation focuses on the promotion of renewable forest-based energy use. The dissertation relies on empirical numerical models that are based on microeconomic theory. Numerical partial equilibrium mixed complementarity problem models were constructed to study the markets under scrutiny. The separate studies focus on co-firing of wood biomass and fossil fuels, liquid biofuel production in the pulp and paper industry, and the impacts of climate policy on the pulp and paper sector.‬ ‪The dissertation shows that the policies promoting wood-based energy may have have unexpected negative impacts. When feed-in tariff is imposed together with emissions trading, in some plants the production of renewable electricity might decrease as the emissions price increases. The dissertation also shows that in liquid biofuel production, investment subsidy may cause high direct policy costs and other negative impacts when compared to other policy instruments. The results of the dissertation also indicate that from the climate mitigation perspective, perfect competition is the favored wood market competition structure, at least if the emissions trading system is not global.‬ ‪In conclusion, this dissertation suggests that when promoting the use of wood biomass in energy production, the favored policy instruments are subsidies that promote directly the renewable energy production (i.e. production subsidy, renewables subsidy or feed-in premium). Also, the policy instrument should be designed to be dependent on the emissions price or on the substitute price. In addition, this dissertation shows that when planning policies to promote wood-based renewable energy, the goals of the policy scheme should be clear before decisions are made on the choice of the policy instruments.‬

Endocrine disruption in fish: An assessment of recent research and results

This report provides an assessment of recent investigations into endocrine disruption in fresh and saltwater species of fish. Most work to date has concen-trated on reproductive endocrine disruption. Laboratory studies have shown a variety of synthetic and natural chemicals including certain industrial intermediates, PAHs, PCBs, pesticides, dioxins, trace elements and plant sterols can interfere with the endocrine system in fish. The potency of most of these chemicals, however, is typically hundreds to thousands of times less than that of endog-enous hormones. Evidence of environmental endocrine disruption ranges from the presence of female egg proteins in males and reduced levels of endogenous hormones in both males and females, to gonadal histopathologies and intersex (presence of ovotestes) fish. Overt endocrine disruption in fish does not appear to be a ubiquitous environmental phenomenon, but rather more likely to occur near sewage treatment plants, pulp and paper mills, and in areas of high organic chemical contamination. However, more wide-spread endocrine disruption can occur in rivers with smaller flows and correspondingly large or numerous wastewater inputs. Some of the most severe examples of endocrine disruption in fish have been found adjacent to sewage treatment plants. Effects are thought to be caused prima-rily by natural and synthetic estrogens and to a lesser extent by the degradation products of alkylphenol poly-ethoxylate surfactants. Effects found in fish near pulp and paper mills include reduced levels of estrogens and androgens as well as masculinization of females, and has been linked to the presence of β-sitosterol, a plant sterol. Effects seen in areas of heavy industrial activity typically include depressed levels of estrogens and androgens as well as reduced gonadal growth, and may be linked to the presence of PAHs, PCBs, and possibly dioxins. At this time, however, there is no clear indication that large populations of fish are being seriously impacted as a result of endocrine disruption, although additional work is needed to address this possibility. (PDF contains 63 pages)

Upgrading of suberin from cork and birch outer bark

O trabalho aqui apresentado teve como principal propósito o estudo do potencial da suberina como fonte de produtos de química fina e como precursor de novos materiais macromoleculares de origem renovável. O interesse na suberina reside, não só na sua ubiquidade e nas suas propriedades únicas em termos de composição química e hidrofobicidade, mas também no facto de ser um dos principais componentes macromoleculares dos subprodutos da indústria corticeira de Quercus suber L. no Sul da Europa, e da indústria de pasta de papel do Norte da Europa, que utiliza a Betula pendula Roth como matéria-prima. A primeira parte do presente trabalho consistiu no estudo detalhado da composição química da cortiça de Quercus suber L. e respectivos resíduos industriais bem como da casca de Betula pendula Roth recorrendo a diferentes técnicas de caracterização, nomeadamente GC-MS, IV, RMN de 1H e de 13C, DSC, termomicroscopia, TGA e difracção de raios-X. Os resultados mostraram que os produtos de despolimerização da suberina representam tipicamente uma fracção substancial de todas as amostras. Para além da suberina, foram também identificados nas diversas amostras quantidades variáveis de compostos triterpénicos, lenhina, polissacarídeos e matéria inorgânica. Os principais resultados da análise por GC-MS mostraram que todas as amostras de suberina despolimerizada são fontes abundantes de ω-hidroxiácidos e de ácidos dicarboxílicos, bem como dos correspondentes derivados epóxidados. No entanto, as quantidades relativas de cada componente identificado foram significativamente diferentes entre amostras. Por exemplo, em amostras de suberina da casca de Quercus suber L. isoladas por metanólise alcalina o composto maioritário encontrado foi o ácido 22-hidroxidocosanóico, enquanto que a suberina também proveniente da cortiça, mas isolada por hidrólise alcalina era composta maioritariamente pelo ácido 9,10-dihidroxioctadecanóico. Já no caso da amostra de suberina despolimerizada proveniente da casca externa da bétula o composto identificado como mais abundante foi o ácido 9,10-epoxi-18-hidroxioctadecanóico. A caracterização das diversas amostras de suberina despolimerizada por FTIR e RMN de 1H e de 13C foram concordantes com os resultados de GC-MS, evidenciando a sua natureza predominantemente lipofílica. Foi ainda determinada a razão entre os grupos CO2H/OH e CO2CH3/OH por RMN de 1H das amostras convenientemente derivatizadas com isocianato de tricloroacetilo, verificando-se que a suberina despolimerizada possuía quantidades não-estequiométricas destes grupos funcionais. A investigação do comportamento térmico das amostras de suberina despolimerizada, por DSC e termomicroscopia, bem como a análise por difracção de raios-X, permitiu concluir que algumas amostras de suberina despolimerizada possuíam importantes domínios cristalinos e pontos de fusão bem definidos, tipicamente próximos de 70 oC, enquanto outras amostras eram essencialmente amorfa. Factores como a fonte de suberina ou as condições de despolimerização estiveram na origem destas diferenças. iv Neste trabalho estudaram-se também os extractáveis lipofílicos da cortiça e dos seus resíduos industriais, em particular os do pó industrial de cortiça e dos condensados negros, mostrando que os extractáveis lipofílicos são uma fonte abundante de compostos triterpénicos, em particular de ácido betulínico e de friedelina. Foram ainda identificadas fracções abundantes de ω-hidroxiácidos e de ácidos dicarboxílicos no condensado negro. A segunda parte deste trabalho abordou a síntese e a caracterização de novos poliésteres alifáticos derivados de suberina. Estes materiais foram sintetizados utilizando, quer misturas de suberina despolimerizada, quer monómeros modelo estruturalmente análogos aos existentes na suberina. Recorreu-se para o efeito a duas aproximações distintas de polimerização por passos, a policondensação e a politransesterificação. Procurou-se em simultâneo maximizar a eficiência da polimerização em termos de peso molecular e de extensão da reacção e utilizar condições de reacção de química “verdes”. Neste sentido, utilizou-se a policondensação em emulsão utilizando um tensioactivo como catalisador e a policondensação em massa utilizando a lipase B de Candida antarctica. Adicionalmente foram também testado os catalisadores trifluorometanosulfonato de bismuto(III) no caso da policondensação, e ainda os catalisadores clássicos óxido de antimónio(III) e o carbonato de potássio no caso da politransesterificação. Os poliésteres resultantes foram caracterizados através de várias técnicas, tais como IV, RMN (de 1H e de 13C), DSC, DMA, TGA, difracção de raios-X e medidas dos ângulos de contacto. Verificou-se que os catalisadores trifluorometanosulfonato de bismuto (III), óxido de antimónio(III) e carbonato de potássio conduziram aos rendimentos de isolamento dos polímeros resultantes mais elevados. No caso dos poliésteres derivados da suberina os resultados em termos de rendimentos e pesos moleculares sofreram um incremento substancial quando a estequiometria da reacção de polimerização foi adequadamente balanceada (r=1) com a adição de uma quantidade extra de um comonómero. Verificou-se a predominância de diferentes estruturas consoante a amostra de suberina utilizada e as condições de síntese adoptada, predominando as cadeias lineares ou então quantidades substanciais de estruturas reticuladas. Globalmente, este primeiro estudo sistemático da utilização de suberina como um precursor de novos poliésteres alifáticos confirmou o elevado potencial deste recurso abundante e renovável como precursor para preparar materiais macromoleculares.

Extraction and purification of triterpenic acids from eucalypt bark

A indústria da pasta e do papel é um sector importante da economia mundial, particularmente a que assenta em espécies de Eucalyptus. No entanto, essas indústrias geram quantidades significativas de correntes secundárias de subprodutos e resíduos de biomassa que podem ser exploradas em aplicações de valor acrescentado em vez de serem queimadas para produção de energia. Um exemplo nobre pode ser a produção de ácidos triterpénicos com estruturas dos tipos lupano, oleanano e ursano, dada a sua abundância em alguns destes resíduos, em particular na casca, adotando o conceito de biorrefinaria integrada numa fábrica de pasta. Estes compostos são conhecidos pelas suas inúmeras actividades biológicas, por exemplo, antioxidante, anti-inflamatória e antitumoral, e podem encontrar aplicações em produtos de elevado valor, tais como cosméticos, nutracêuticos ou farmacêuticos. Neste sentido, o estudo das potencialidades das cascas das espécies de eucalipto mais exploradas enquanto fontes de compostos triterpénicos é um tópico relevante. Por conseguinte, foram analisados e comparados em pormenor os teores e composições em ácidos triterpénicos (TTAs) das cascas externas de várias espécies de eucalipto (E. globulus, E. grandis, E. urograndis, E. maidenii e E. nitens). Os teores dos principais TTAs identificados nestas espécies variaram entre 4.5 g/kg no E. urograndis e 21.6 g/kg no E. nitens. Observou-se que as cascas externas de Eucalyptus de zonas temperadas e Mediterrânicas, nomeadamente E. nitens e E. globulus, são mais ricas em TTAs que as espécies de regiões tropicais e subtropicais. Além disso, a casca externa do E. globulus é claramente a mais rica em ácidos com estruturas do tipo ursano enquanto a do E. nitens é a mais rica em ácidos do tipo oleanano e lupano. Estes resultados levaram-nos a estudar a extração dos TTAs da casca de Eucalyptus, bem como a sua posterior concentração e purificação, a qual foi efetuada por extração sólido-líquido convencional combinada com a precipitação de solutos, e por extração com fluidos supercríticos (SFE). No que diz respeito à primeira abordagem referida, foi desenvolvido neste trabalho um método patenteado que permite obter extratos enriquecidos em TTAs das cascas de eucalipto baseado em tecnologias disponíveis no imediato. Em relação à segunda abordagem, e de forma a apostar em processos de baixo impacto ambiental exigidos pelas biorrefinarias do futuro, a SFE surge como uma opção natural. Assim, foi efetuada a SFE da casca caduca do E. globulus com dióxido de carbono puro e modificado para recuperar a fração de TTAs, e os resultados foram comparados com os obtidos por extração em Soxhlet com diclorometano. Foram realizados estudos preliminares sobre a influência da pressão (100-200 bar), a adição de co-solvente (0, 5 e 8% m/m de etanol), e operação em múltiplos passos a fim de avaliar a aplicabilidade da alternativa supercrítica para a sua produção eficiente e selectiva. Os resultados destacaram a influência da pressão e o importante papel resumo (cont.) desempenhado pelo co-solvente neste processo, cujo efeito foi mais relevante do que o aumento da pressão em várias dezenas de bar. Este trabalho foi depois otimizado, usando o planeamento factorial de experiências e a metodologia de superfícies de resposta, para analisar a influência da temperatura (40-60 ºC), pressão (100-200 bar), e teor de etanol (0.0-5.0% m/m) na recuperação dos TTAs e respectiva concentração nos extractos. Nestes intervalos, as melhores condições de operação encontradas foram 200 bar, 40 °C e 5% de etanol, para as quais os modelos de regressão estatisticamente validados previram um rendimento de extração de 1.2% com 50% de concentração em TTAs, correspondendo ao rendimento em TTAs de 5.1 g/kg de casca e uma recuperação de 79.2% comparativamente ao valor do Soxhlet. Os TTAs livres e acetilados apresentaram tendências de extracção bastante distintas devido às suas diferentes afinidades para o CO2 causadas pelas diferentes polaridades: os derivados acetilados aproximam-se de um patamar máximo a cerca de 200 bar e 5% de etanol, enquanto a extração dos TTAs livres apresenta uma tendência sempre crescente no intervalo de condições estudado. Foram também medidas curvas cumulativas de SFE da casca do E. globulus de forma a analisar o comportamento cinético do processo em termos de rendimento total, rendimento em TTAs, rendimento em TTAs livres, rendimento em TTAs acetilados, e concentração dos TTAs nos extractos. Foi analisada a influência da pressão, temperatura, teor de co-solvente e caudal do dióxido de carbono sobre as respostas anteriores. Os dados experimentais foram modelados com os modelos Logístico, de Dessorção, de Placa Plana Simples, e de Difusão. Na globalidade, os resultados confirmaram que a pressão e o teor de etanol têm um efeito significativo sobre as curvas de extração, os rendimentos finais e as concentrações dos extratos, e mostraram a presença de limitações externas à transferência de massa em alguns ensaios. Mais uma vez, as famílias individuais de TTAs livres e acetilados apresentaram diferentes tendências de extracção. A modelação permitiu-nos confirmar não só o importante papel desempenhado pela difusão intraparticular na SFE, mas também a contribuição da resistência no filme em alguns ensaios. Após a análise de todos os resultados, foi efetuado um ensaio em duas etapas em série, possibilitando o enriquecimento do teor em TTAs no extracto devido às diferentes condições adotadas em cada etapa. Por último, um éster metílico de um ácido triterpénico do tipo oleanano - morolato de metilo - foi identificado pela primeira vez enquanto componente da casca de Eucalyptus na casca externa do Eucalyptus grandis x globulus, onde ocorre em teores elevados. A sua extração com CO2 supercrítico foi também realizada, visando a conceção de uma alternativa de extração ambientalmente benigna para este composto. A 200 bar e 60 ºC, a remoção do morolato de metilo atingiu um patamar às 6 h para 5.1 kg h-1 de CO2 / kg de casca. Em geral, e de forma semelhante à SFE da casca do E. globulus, os TTAs acetilados foram mais significativamente extraídos quando comparados com os seus ácidos livres, o que está diretamente relacionado com a natureza menos polar destas moléculas. O trabalho apresentado nesta tese é uma contribuição para a valorização de uma corrente de biomassa com baixo valor na indústria de pasta em duas vertentes complementares. Por um lado, aumentou o conhecimento da composição lipofílica das cascas de Eucalyptus spp. com interesse comercial para a produção de pasta, destacando o seu potencial enquanto fontes de ácidos triterpénicos. Por outro lado, foram desenvolvidos dois processos alternativos e facilmente integráveis numa fábrica de pasta para a sua exploração a partir da casca: um baseado em tecnologias convencionais bem estabelecidas a nível industrial, prevendo a sua aplicação a curto prazo, e um outro baseado na SFE, seguindo as tendências das futuras biorrefinarias.

Ontario Paper Company Limited

On February 29, 1912 The Ontario Paper Company Limited was incorporated under the leadership of Col. Robert R. McCormick. Four months later construction began in Thorold, Ontario as this location was best for the abundance of power and water and water transportation. The first machine was started at the mill on September 5, 1913. The mill was one of the most advanced of its era, using electricity instead of water power. The mill was also the first of its kind as it combined pulp and paper making instead of separating the two operations.

St. Catharines and District Labour Council fonds, 1957-1986

The St. Catharines and District Labour Council was founded in May 1957 by unionized workers from St. Catharines, Thorold, Merritton, Port Dalhousie and Grimsby. They sought to improve the social and economic welfare of workers; promote the organization of workers into unions for their mutual benefit, regardless of race, creed, colour, or national origin; encourage the sale of union-made goods and services; promote worker education; provide workers with a voice in politics; and safeguard the democratic nature of the labour movement. The Council, affiliated with both the Canadian Labour Congress and the Ontario Federation of Labour, was instrumental in assisting local workers with their labour disputes, including Canadian Pulp and Paper workers at Abitibi Provincial Paper in Thorold [1975-76], and Gallaher Paper [1999], workers at the St. Catharines Eaton’s store [1985], as well as smaller disputes such as that between the part-time secretarial staff and the Welland County Roman Catholic Separate School Board [1972] and workers of the Skyway Lumber Company [1972]. The Council also assisted the community at large by offering a Community Counseling Service [1971-1976] to help citizens with issues concerning various government agencies, social services and Acts, such as the Vacation Pay Act, Landlord and Tenant Act, Employment Standards Act, unemployment insurance claims and workman’s compensation claims. Other projects that the Council organized included an annual Education Institute [1958-1965] and the annual publication of Labour Review, a summary of the Council’s past year. The Labour Council continued to operate until 2010, when several local Labour Councils merged to form the Niagara Regional Labour Council.

Utilization of biodiesel-derived glycerol or xylose for increased growth and lipid production by indigenous microalgae

The use of industrial wastes rich in mineral nutrients and carbon sources to increase the final microalgal biomass and lipid yield at a low cost is an important strategy to make algal biofuel technology viable. Using strains from the microalgal collection of the Université de Montréal, this report shows for the first time that microalgal strains can be grown on xylose, the major carbon source found in wastewater streams from pulp and paper industries, with an increase in growth rate of 2.8 fold in comparison to photoautotrophic growth, reaching up to µ=1.1/day. On glycerol, growth rates reached as high as µ=1.52/day. Lipid productivity increased up to 370% on glycerol and 180% on xylose for the strain LB1H10, showing the suitability of this strain for further development for biofuels production through mixotrophic cultivation.

Marine bacterial prodigiosin as dye for rubber latex, polymethyl methacrylate sheets and paper

Prodigiosin is known for its immunomodulatory, antibacterial, antimycotic, antimalarial, algicidal and anticancer activities. Here, we reported the evaluation of prodigiosin pigment as a dyeing agent in rubber latex, paper and polymethyl methacrylate (PMMA) so that it can be considered as an alternative to synthetic pigments. Maximum color shade was obtained in rubber sheet prepared with 0.5 parts per hundred gram of rubber (phr) pigment and PMMA sheet incorporated with 0.08 μg pigment. Results indicate scope for utilization of prodigiosin as dye for PMMA and rubber and also prodigiosin dyed paper as a pH indicator. Further, being a natural and water insoluble pigment, it is ecofriendly

Agroforestry systems of timber species and cacao: survival and growth during the early stages

In recent times, increased emphasis has been placed on diversifying the types of trees to shade cacao (Theobroma cacao L.) and to achieve additional services. Agroforestry systems that include profitable and native timber trees are a viable alternative but it is necessary to understand the growth characteristics of these species under different environmental conditions. Thus, timber tree species selection should be based on plant responses to biotic and abiotic factors. The aims of this study were (1) to evaluate growth rates and leaf area indices of the four commercial timber species: Cordia thaisiana, Cedrela odorata, Swietenia macrophylla and Tabebuia rosea in conjunction with incidence of insect attacks and (2) to compare growth rates of four Venezuelan Criollo cacao cultivars planted under the shade of these four timber species during the first 36 months after establishment. Parameters monitored in timber trees were: survival rates, growth rates expressed as height and diameter at breast height and leaf area index. In the four Cacao cultivars: height and basal diameter. C. thaisiana and C. odorata had the fastest growth and the highest survival rates. Growth rates of timber trees will depend on their susceptibility to insect attacks as well as to total leaf area. All cacao cultivars showed higher growth rates under the shade of C. odorata. Growth rates of timber trees and cacao cultivars suggest that combinations of cacao and timber trees are a feasible agroforestry strategy in Venezuela.