Carabid beetles (Coleoptera, Carabidae) as indicators of environmental change in Ranomafana National Park, Madagascar

Growing human populations and increasing exploitation of natural resources threaten nature all over the world. Tropical countries are especially vulnerable to human impact because of the high number of species, most of these endemic and still unknown. Madagascar is one of the centers of high biodiversity and renowned for its unique species. However, during the last centuries many endemic species have gone extinct and more are endangered. Because of high natural values, Madagascar is one of the global conservation priorities. The establishment of Ranomafana National Park (RNP) was intended to preserve the unique nature of Madagascar. Containing several endemic and threatened species, Ranomafana has been selected as one of UNESCO’s World Natural Heritage sites. However, due to strong human pressures the region immediately surroundings the protected area has severely degraded. Aims of this thesis were to inventory carabid fauna in RNP and evaluate their use as indicators of the environmental change. Carabid beetles were collected from protected area (secondary and primary forests) and from its degraded surrounding area. Collecting was mostly conducted by hand during years 2000-2005. Species compositions between the protected area and its surroundings were compared, and species habitat preferences and seasonal variations were studied. In total, 4498 individuals representing 127 carabid species (of which 38 are new species) were collected. Species compositions within and outside of the protected area were markedly different. Most of the species preferred forest as their primary habitat and were mainly collected from trees and bushes. Their value as indicators is based on their different habitat requirements and sensitivity to environmental variables. Some of the species were found only in the protected forest, some occupied also the degraded forests and some preferred open areas. Carabid fauna is very species rich in Ranomafana and there are still many species to be found. Most of the species are arboreal and probably cannot survive in the deforested areas outside the park. This is very likely also the case for other species. Establishment and continued protection of RNP is probably the only way to conserve this globally important area. However, new occupations and land use methods are urgently needed by the local people for improving their own lives while maintaining the forest intact.

Literature, tourism and the city: Writing and cultural change

Today national and regional tourism organizations look to sophisticated cultural tourism programs to enhance the visitor experience for tourists of their particular city. Yet research indicates that a challenge exists in designing and implementing programs that take full advantage of a city’s historical and emergent literary cultures. In this paper we offer critical insights into how literary cultural heritage can foster the development of an integrated and dynamic approach and provide the experience sought by local and global tourists. International exemplars are cited together with an analysis of the Australian city of Brisbane that describes itself as a ‘new world city.’ The findings of our research show that programs that harness diverse literary cultures, rather than adhering to a single literary representation, are better equipped to build identity and thus extend cultural tourism potential.

Playing the policy game: A review of the barriers and enablers of nutrition policy change

- Objective To progress nutrition policy change and develop more effective advocates, it is useful to consider real-world factors and practical experiences of past advocacy efforts to determine the key barriers and enablers to nutrition policy change. This review aimed to identify and synthesize the enablers and barriers to public policy change within the field of nutrition. - Design Electronic databases were searched systematically for studies examining policymaking in public health nutrition. An interpretive synthesis was undertaken. Setting: International, national, state and local government jurisdictions within high-income, democratic countries. - Results Sixty-three studies were selected for inclusion. Numerous themes were identified explaining the barriers and enablers to policy change, all of which fell under the overarching category, ‘political will’, underpinned by a second major category, ‘public will’. Sub-themes, including pressure from industry; neoliberal ideology; use of emotions and values, and being visible were prevalent in describing links between public will, political will and policy change. - Conclusions The frustration around lack of public policy change in nutrition frequently stems from a belief that policymaking is a rational process in which evidence is used to assess the relative costs and benefits of options. The findings from this review confirm that evidence is only one component of influencing policy change. For policy change to occur there needs to be the political will, and often the public will, for the proposed policy problem and solution. This review presents a suite of enablers which can assist health professionals to influence political and public will in future advocacy efforts.

Carbon sequestration versus bioenergy: A case study from South India exploring the relative land-use efficiency of two options for climate change mitigation

This case study has been carried out as a comparison between two different land-use strategies for climate change mitigation, with possible application within the Clean Development Mechanisms. The benefits of afforestation for carbon sequestration versus for bioenergy production are compared in the context of development planning to meet increasing domestic and agricultural demand for electricity in Hosahalli village, Karnataka, India. One option is to increase the local biomass based electricity generation, requiring an increased biomass plantation area. This option is compared with fossil based electricity generation where the area is instead used for producing wood for non-energy purposes while also sequestering carbon in the soil and standing biomass. The different options have been assessed using the PRO-COMAP model. The ranking of the different options varies depending on the system boundaries and time period. Results indicate that, in the short term (30 years) perspective, the mitigation potential of the long rotation plantation is largest, followed by the short rotation plantation delivering wood for energy. The bioenergy option is however preferred if a long-term view is taken. Short rotation forests delivering wood for short-lived non-energy products have the smallest mitigation potential, unless a large share of the wood products are used for energy purposes (replacing fossil fuels) after having served their initial purpose. If managed in a sustainable manner all of these strategies can contribute to the improvement of the social and environmental situation of the local community. (C) 2009 Elsevier Ltd. All rights reserved.

CAE-based prediction of projectile residual velocity for impact on single and multi-layered metallic armour plates

The present, paper deals with the CAE-based study Of impact of jacketed projectiles on single- and multi-layered metal armour plates using LS-DYNA. The validation of finite element modelling procedure is mainly based on the mesh convergence study using both shell and solid elements for representing single-layered mild steel target plates. It, is shown that the proper choice of mesh density and the strain rate-dependent material properties are essential for all accurate prediction of projectile residual velocity. The modelling requirements are initially arrived at by correlating against test residual velocities for single-layered mild steel plates of different depths at impact velocities in the ran.-c of approximately 800-870 m/s. The efficacy of correlation is adjudged, in terms of a 'correlation index', defined in the paper: for which values close to unity are desirable. The experience gained for single-layered plates is next; used in simulating projectile impacts on multi-layered mild steel target plates and once again a high degree of correlation with experimental residual velocities is observed. The study is repeated for single- and multi-layered aluminium target plates with a similar level of success in test residual velocity prediction. TO the authors' best knowledge, the present comprehensive study shows in particular for the first time that, with a. proper modelling approach, LS-DYNA can be used with a great degree of confidence in designing perforation-resistant single and multi-layered metallic armour plates.

Timing of puberty : Genetic regulation

In the general population, the timing of puberty is normally distributed. This variation is determined by genetic and environmental factors, but the exact mechanisms underlying these influences remain elusive. The purpose of this study was to gain insight into genetic regulation of pubertal timing. Contributions of genetic versus environmental factors to the normal variation of pubertal timing were explored in twins. Familial occurrence and inheritance patterns of constitutional delay of growth and puberty, CDGP (a variant of normal pubertal timing), were studied in pedigrees of patients with this condition. To ultimately detect genes involved in the regulation of pubertal timing, genetic loci conferring susceptibility to CDGP were mapped by linkage analysis in the same family cohort. To subdivide the overall phenotypic variance of pubertal timing into genetic and environmental components, genetic modeling based on monozygous twins sharing 100% and dizygous twins sharing 50% of their genes was used in 2309 girls and 1828 boys from the FinnTwin 12-17 study. The timing of puberty was estimated from height growth, i.e. change in the relative height between the age when pubertal growth velocity peaks in the general population and adulthood. This reflects the percentage of adult height achieved at the average peak height velocity age, and thus, pubertal timing. Boys and girls diagnosed with CDGP were gathered through medical records from six pediatric clinics in Finland. First-degree relatives of the probands were invited to participate by letter; altogether, 286 families were recruited. When possible, families were extended to include also second-, third-, or fourth-degree relatives. The timing of puberty in all family members was primarily assessed from longitudinal growth data. Delayed puberty was defined by onset of pubertal growth spurt or peak height velocity taking place 1.5 (relaxed criterion) or 2 SD (strict criterion) beyond the mean. If growth data were unavailable, pubertal timing was based on interviews. In this case, CDGP criteria were set as having undergone pubertal development more than 2 (strict criterion) or 1.5 years (relaxed criterion) later than their peers, or menarche after 15 (strict criterion) or 14 years (relaxed criterion). Familial occurrence of strict CDGP was explored in families of 124 patients (95 males and 29 females) from two clinics in Southern Finland. In linkage analysis, we used relaxed CDGP criteria; 52 families with solely growth data-based CDGP diagnoses were selected from all clinics. Based on twin data, genetic factors explain 86% and 82% of the variance of pubertal timing in girls and boys, respectively. In families, 80% of male and 76% of female probands had affected first-degree relatives, in whom CDGP was 15 times more common than the expected (2.5%). In 74% (17 of 23) of the extended families with only one affected parent, familial patterns were consistent with autosomal dominant inheritance. By using 383 multiallelic markers and subsequently fine-mapping with 25 additional markers, significant linkage for CDGP was detected to the pericentromeric region of chromosome 2, to 2p13-2q13 (multipoint HLOD 4.44, α 0.41). The findings of the large twin study imply that the vast majority of the normal variation of pubertal timing is attributed to genetic effects. Moreover, the high frequency of dominant inheritance patterns and the large number of affected relatives of CDGP patients suggest that genetic factors also markedly contribute to constitutional delay of puberty. Detection of the locus 2p13-2q13 in the pericentromeric region of chromosome 2 associating with CDGP is one step towards unraveling the genes that determine pubertal timing.

Anti-TNF treatment in juvenile idiopathic arthritis and associated uveitis : Clinical perspectives on growth, uveitis, and drug survival

Juvenile idiopathic arthritis (JIA) is a heterogeneous group of childhood chronic arthritides, associated with chronic uveitis in 20% of cases. For JIA patients responding inadequately to conventional disease-modifying anti-rheumatic drugs (DMARDs), biologic therapies, anti-tumor necrosis factor (anti-TNF) agents are available. In this retrospective multicenter study, 258 JIA-patients refractory to DMARDs and receiving biologic agents during 1999-2007 were included. Prior to initiation of anti-TNFs, growth velocity of 71 patients was delayed in 75% and normal in 25%. Those with delayed growth demonstrated a significant increase in growth velocity after initiation of anti-TNFs. Increase in growth rate was unrelated to pubertal growth spurt. No change was observed in skeletal maturation before and after anti-TNFs. The strongest predictor of change in growth velocity was growth rate prior to anti-TNFs. Change in inflammatory activity remained a significant predictor even after decrease in glucocorticoids was taken into account. In JIA-associated uveitis, impact of two first-line biologic agents, etanercept and infliximab, and second-line or third-line anti-TNF agent, adalimumab, was evaluated. In 108 refractory JIA patients receiving etanercept or infliximab, uveitis occurred in 45 (42%). Uveitis improved in 14 (31%), no change was observed in 14 (31%), and in 17 (38%) uveitis worsened. Uveitis improved more frequently (p=0.047) and frequency of annual uveitis flares was lower (p=0.015) in those on infliximab than in those on etanercept. In 20 patients taking adalimumab, 19 (95%) had previously failed etanercept and/or infliximab. In 7 patients (35%) uveitis improved, in one (5%) worsened, and in 12 (60%) no change occurred. Those with improved uveitis were younger and had shorter disease duration. Serious adverse events (AEs) or side-effects were not observed. Adalimumab was effective also in arthritis. Long-term drug survival (i.e. continuation rate on drug) with etanercept (n=105) vs. infliximab (n=104) was at 24 months 68% vs. 68%, and at 48 months 61% vs. 48% (p=0.194 in log-rank analysis). First-line anti-TNF agent was discontinued either due to inefficacy (etanercept 28% vs. infliximab 20%, p=0.445), AEs (7% vs. 22%, p=0.002), or inactive disease (10% vs. 16%, p=0.068). Females, patients with systemic JIA (sJIA), and those taking infliximab as the first therapy were at higher risk for treatment discontinuation. One-third switched to the second anti-TNF agent, which was discontinued less often than the first. In conclusion, in refractory JIA anti-TNFs induced enhanced growth velocity. Four-year treatment survival was comparable between etanercept and infliximab, and switching from first-line to second-line agent a reasonable therapeutic option. During anti-TNF treatment, one-third with JIA-associated anterior uveitis improved.

Detection of contiguous and distributed damage through contours of equal frequency change

The paper presents the results of a computational modeling for damage identification process for an axial rod representing an end-bearing pile foundation with known damage and a simply supported beam representing a bridge girder. The paper proposes a methodology for damage identification from measured natural frequencies of a contiguously damaged reinforced concrete axial rod and beam, idealized with distributed damage model. Identification of damage is from Equal_Eigen_value_change (Iso_Eigen_value_Change) contours, plotted between pairs of different frequencies. The performance of the method is checked for a wide variation of damage positions and extents. An experiment conducted on a free-free axially loaded reinforced concrete member and a flexural beam is shown as examples to prove the pros and cons of this method. (C) 2009 Elsevier Ltd. All rights reserved.

Energy efficient change detection over a MAC using physical layer fusion

We propose a simple and energy efficient distributed change detection scheme for sensor networks based on Page's parametric CUSUM algorithm. The sensor observations are IID over time and across the sensors conditioned on the change variable. Each sensor runs CUSUM and transmits only when the CUSUM is above some threshold. The transmissions from the sensors are fused at the physical layer. The channel is modeled as a multiple access channel (MAC) corrupted with IID noise. The fusion center which is the global decision maker, performs another CUSUM to detect the change. We provide the analysis and simulation results for our scheme and compare the performance with an existing scheme which ensures energy efficiency via optimal power selection.

Decentralized sequential change detection using physical layer fusion

We study the problem of decentralized sequential change detection with conditionally independent observations. The sensors form a star topology with a central node called fusion center as the hub. The sensors transmit a simple function of their observations in an analog fashion over a wireless Gaussian multiple access channel and operate under either a power constraint or an energy constraint. Simulations demonstrate that the proposed techniques have lower detection delays when compared with existing schemes. Moreover we demonstrate that the energy-constrained formulation enables better use of the total available energy than a power-constrained formulation.

Mapping of Average Shear Wave Velocity for Bangalore Region: A Case Study

Mapping the shear wave velocity profile is an important part in seismic hazard and microzonation studies. The shear wave velocity of soil in the city of Bangalore was mapped using the Multichannel Analysis of Surface Wave (MASW) technique. An empirical relationship was found between the Standard Penetration Test (SPT) corrected N value ((N1)60cs) and measured shear wave velocity (Vs). The survey points were selected in such a way that the results represent the entire Bangalore region, covering an area of 220 km2. Fifty-eight 1-D and 20 2-D MASW surveys were performed and their velocity profiles determined. The average shear wave velocity of Bangalore soils was evaluated for depths of 5 m, 10 m, 15 m, 20 m, 25 m and 30 m. The sub-soil classification was made for seismic local site effect evaluation based on average shear wave velocity of 30-m depth (Vs30) of sites using the National Earthquake Hazards Reduction Program (NEHRP) and International Building Code (IBC) classification. Mapping clearly indicates that the depth of soil obtained from MASW closely matches with the soil layers identified in SPT bore holes. Estimation of local site effects for an earthquake requires knowledge of the dynamic properties of soil, which is usually expressed in terms of shear wave velocity. Hence, to make use of abundant SPT data available on many geotechnical projects in Bangalore, an attempt was made to develop a relationship between Vs (m/s) and (N1)60cs. The measured shear wave velocity at 38 locations close to SPT boreholes was used to generate the correlation between the corrected N values and shear wave velocity. A power fit model correlation was developed with a regression coefficient (R2) of 0.84. This relationship between shear wave velocity and corrected SPT N values correlates well with the Japan Road Association equations.

Modeling and analysis of a tunable piezoelectric structure for transverse shear wave generation

An analytical investigation of the transverse shear wave mode tuning with a resonator mass (packing mass) on a Lead Zirconium Titanate (PZT) crystal bonded together with a host plate and its equivalent electric circuit parameters are presented. The energy transfer into the structure for this type of wave modes are much higher in this new design. The novelty of the approach here is the tuning of a single wave mode in the thickness direction using a resonator mass. First, a one-dimensional constitutive model assuming the strain induced only in the thickness direction is considered. As the input voltage is applied to the PZT crystal in the thickness direction, the transverse normal stress distribution induced into the plate is assumed to have parabolic distribution, which is presumed as a function of the geometries of the PZT crystal, packing mass, substrate and the wave penetration depth of the generated wave. For the PZT crystal, the harmonic wave guide solution is assumed for the mechanical displacement and electric fields, while for the packing mass, the former is solved using the boundary conditions. The electromechanical characteristics in terms of the stress transfer, mechanical impedance, electrical displacement, velocity and electric field are analyzed. The analytical solutions for the aforementioned entities are presented on the basis of varying the thickness of the PZT crystal and the packing mass. The results show that for a 25% increase in the thickness of the PZT crystal, there is ~38% decrease in the first resonant frequency, while for the same change in the thickness of the packing mass, the decrease in the resonant frequency is observed as ~35%. Most importantly the tuning of the generated wave can be accomplished with the packing mass at lower frequencies easily. To the end, an equivalent electric circuit, for tuning the transverse shear wave mode is analyzed.

Planning for climate change adaptation in a neoliberal context: Influences and responses

This thesis explores how planning policy and practice is responding to the challenge of climate change, particularly in contexts where neoliberal rationales and practices frame decision making. It documents patterns of devolving government responsibilities and experiences of market based mechanisms before reporting on institutional and professional responses to these conditions. The research centred on a qualitative case study and involved thematic content analysis of policy documents and informant interviews. The contribution of the research and thesis is to establish the outlook for climate change adaptation under neoliberal conditions, and to introduce strategies for planners operating within these conditions.