Prefrontal cortex modulation using transcranial DC stimulation reduces alcohol craving: A double-blind, sham-controlled study

Background: Functional neuroimaging studies have shown that specific brain areas are associated with alcohol craving including the dorsolateral prefrontal cortex (DLPFC). We tested whether modulation of DLPFC using transcranial direct current stimulation (tDCS) could alter alcohol craving in patients with alcohol dependence while being exposed to alcohol cues. Methods: We performed a randomized sham-controlled study in which 13 subjects received sham and active bilateral tDCS delivered to DLPFC (anodal left/cathodal right and anodal right/cathodal left). For sham stimulation, the electrodes were placed at the same positions as in active stimulation; however, the stimulator was turned off after 30 s of stimulation. Subjects were presented videos depicting alcohol consumption to increase alcohol craving. Results: Our results showed that both anodal left/cathodal right and anodal right/cathodal left significantly decreased alcohol craving compared to sham stimulation (p < 0.0001). In addition, we found that following treatment, craving could not be further increased by alcohol cues. Conclusions: Our findings showed that tDCS treatment to DLPFC can reduce alcohol craving. These findings extend the results of previous studies using noninvasive brain stimulation to reduce craving in humans. Given the relatively rapid suppressive effect of tDCS and the highly fluctuating nature of alcohol craving, this technique may prove to be a valuable treatment strategy within the clinical setting. (C) 2007 Elsevier Ireland Ltd. All rights reserved.

Secondary metabolites from Spirotropis longifolia (DC) Baill and their antifungal activity against human pathogenic fungi

A phytochemical study of the ethyl acetate extract of the roots and adventitious roots of Spirotropis longifolia, a monodominant tree species of the Guianan rainforest, has allowed the isolation of three compounds: 2- hydroxy-8,9-methylenedioxy-2',2'-dimethylpyrano-[5',6':4,3]-6a-prenyl-[6aS,11aS]-pterocarpan (spirotropin A), 2-hydroxy-8,9-methylenedioxy-2',2'-dimethy1-3',4'-dihydropyrano-[5',6':4,3]-6a-prenyl-(6aS,11aS]-pterocarpan (spirotropin B), and 5,7-dihydroxy-6.8-dipreny1-2 ''''.2 ''''-dimethylpyrano[5 '''',6 '''': 3',4]-isoflavone (spirotropone). In addition, 10 known compounds, trans-oxyresveratrol, trans-resveratrol, piceatannol, daidzein, genistein, isoprunetin, lupeol, latifolol, gnetin D and gnetin E, were also isolated. These compounds were evaluated for their antifungal activity and their cytotoxicity, and their structures were established by 1D and 2D NMR, HRMS, CD and optical rotation measurements. (C) 2011 Elsevier Ltd. All rights reserved.

Modulation Techniques for Multi-Phase Converters and Control Strategies for Multi-Phase Electric Drives

The ever-increasing spread of automation in industry puts the electrical engineer in a central role as a promoter of technological development in a sector such as the use of electricity, which is the basis of all the machinery and productive processes. Moreover the spread of drives for motor control and static converters with structures ever more complex, places the electrical engineer to face new challenges whose solution has as critical elements in the implementation of digital control techniques with the requirements of inexpensiveness and efficiency of the final product. The successfully application of solutions using non-conventional static converters awake an increasing interest in science and industry due to the promising opportunities. However, in the same time, new problems emerge whose solution is still under study and debate in the scientific community During the Ph.D. course several themes have been developed that, while obtaining the recent and growing interest of scientific community, have much space for the development of research activity and for industrial applications. The first area of research is related to the control of three phase induction motors with high dynamic performance and the sensorless control in the high speed range. The management of the operation of induction machine without position or speed sensors awakes interest in the industrial world due to the increased reliability and robustness of this solution combined with a lower cost of production and purchase of this technology compared to the others available in the market. During this dissertation control techniques will be proposed which are able to exploit the total dc link voltage and at the same time capable to exploit the maximum torque capability in whole speed range with good dynamic performance. The proposed solution preserves the simplicity of tuning of the regulators. Furthermore, in order to validate the effectiveness of presented solution, it is assessed in terms of performance and complexity and compared to two other algorithm presented in literature. The feasibility of the proposed algorithm is also tested on induction motor drive fed by a matrix converter. Another important research area is connected to the development of technology for vehicular applications. In this field the dynamic performances and the low power consumption is one of most important goals for an effective algorithm. Towards this direction, a control scheme for induction motor that integrates within a coherent solution some of the features that are commonly required to an electric vehicle drive is presented. The main features of the proposed control scheme are the capability to exploit the maximum torque in the whole speed range, a weak dependence on the motor parameters, a good robustness against the variations of the dc-link voltage and, whenever possible, the maximum efficiency. The second part of this dissertation is dedicated to the multi-phase systems. This technology, in fact, is characterized by a number of issues worthy of investigation that make it competitive with other technologies already on the market. Multiphase systems, allow to redistribute power at a higher number of phases, thus making possible the construction of electronic converters which otherwise would be very difficult to achieve due to the limits of present power electronics. Multiphase drives have an intrinsic reliability given by the possibility that a fault of a phase, caused by the possible failure of a component of the converter, can be solved without inefficiency of the machine or application of a pulsating torque. The control of the magnetic field spatial harmonics in the air-gap with order higher than one allows to reduce torque noise and to obtain high torque density motor and multi-motor applications. In one of the next chapters a control scheme able to increase the motor torque by adding a third harmonic component to the air-gap magnetic field will be presented. Above the base speed the control system reduces the motor flux in such a way to ensure the maximum torque capability. The presented analysis considers the drive constrains and shows how these limits modify the motor performance. The multi-motor applications are described by a well-defined number of multiphase machines, having series connected stator windings, with an opportune permutation of the phases these machines can be independently controlled with a single multi-phase inverter. In this dissertation this solution will be presented and an electric drive consisting of two five-phase PM tubular actuators fed by a single five-phase inverter will be presented. Finally the modulation strategies for a multi-phase inverter will be illustrated. The problem of the space vector modulation of multiphase inverters with an odd number of phases is solved in different way. An algorithmic approach and a look-up table solution will be proposed. The inverter output voltage capability will be investigated, showing that the proposed modulation strategy is able to fully exploit the dc input voltage either in sinusoidal or non-sinusoidal operating conditions. All this aspects are considered in the next chapters. In particular, Chapter 1 summarizes the mathematical model of induction motor. The Chapter 2 is a brief state of art on three-phase inverter. Chapter 3 proposes a stator flux vector control for a three- phase induction machine and compares this solution with two other algorithms presented in literature. Furthermore, in the same chapter, a complete electric drive based on matrix converter is presented. In Chapter 4 a control strategy suitable for electric vehicles is illustrated. Chapter 5 describes the mathematical model of multi-phase induction machines whereas chapter 6 analyzes the multi-phase inverter and its modulation strategies. Chapter 7 discusses the minimization of the power losses in IGBT multi-phase inverters with carrier-based pulse width modulation. In Chapter 8 an extended stator flux vector control for a seven-phase induction motor is presented. Chapter 9 concerns the high torque density applications and in Chapter 10 different fault tolerant control strategies are analyzed. Finally, the last chapter presents a positioning multi-motor drive consisting of two PM tubular five-phase actuators fed by a single five-phase inverter.

Per una reinterpretazione della fuoriuscita di Dossetti dalla DC. Nuove fonti archivistiche sulle due vicesegreterie nazionali del partito(1945-46 E 1950-51)

Commento testuale e contestuale di circa duecento fonti inedite e sconosciute alla storiografia sul ruolo di vicesegretario politico della DC di Giuseppe Dossetti, in particolare con riferimento allo scioglimento dei CLN, del referendum istituzionale, della organizzazione del partito e infine, della sua rottura politica con De Gasperi.

Nonlinear Observers for Sensorless Control of Permanent Magnet Synchronous Motors

In this thesis, the industrial application of control a Permanent Magnet Synchronous Motor in a sensorless configuration has been faced, and in particular the task of estimating the unknown “parameters” necessary for the application of standard motor control algorithms. In literature several techniques have been proposed to cope with this task, among them the technique based on model-based nonlinear observer has been followed. The hypothesis of neglecting the mechanical dynamics from the motor model has been applied due to practical and physical considerations, therefore only the electromagnetic dynamics has been used for the observers design. First observer proposed is based on stator currents and Stator Flux dynamics described in a generic rotating reference frame. Stator flux dynamics are known apart their initial conditions which are estimated, with speed that is also unknown, through the use of the Adaptive Theory. The second observer proposed is based on stator currents and Rotor Flux dynamics described in a self-aligning reference frame. Rotor flux dynamics are described in the stationary reference frame exploiting polar coordinates instead of classical Cartesian coordinates, by means the estimation of amplitude and speed of the rotor flux. The stability proof is derived in a Singular Perturbation Framework, which allows for the use the current estimation errors as a measure of rotor flux estimation errors. The stability properties has been derived using a specific theory for systems with time scale separation, which guarantees a semi-global practical stability. For the two observer ideal simulations and real simulations have been performed to prove the effectiveness of the observers proposed, real simulations on which the effects of the Inverter nonlinearities have been introduced, showing the already known problems of the model-based observers for low speed applications.

Analyse der Beteiligung von Toll-like-Rezeptoren an der DC-Aktivierung nach Parvovirus-H-1-Infektion

Ziel dieser Dissertation war es die funktionelle Rolle der Toll-like Rezeptoren (TLRs) und ihrer Signalwege bei der Aktivierung von dendritischen Zellen (DC) durch Parvovirus H-1- rn(H-1PV) induzierte Tumorzelllysate (TCL) zu untersuchen. rnDas angeborene Immunsystem bekämpft die Bildung und das Wachstum von Tumoren, insbesondere durch Interaktion von Effektor-Immunzellen mit Tumorzellen. Die Aktivierung dieser Immunreaktionen in der Antitumortherapie ist wünschenswert, aber in vielen Situationen nicht zufriedenstellend, da sie durch klassische systemische Therapie allein nicht immer erreicht werden kann. Die therapeutische Anwendung von onkolytischen Viren bei Patienten mit malignen Erkrankungen (Virotherapie) ist ein vielversprechendes Gebiet der Forschung. Die onkosuppressive und immunstimulierende Wirkung von H-1PV auf humane Tumor- und Immunzellen spricht für eine Verwendung in der Krebstherapie. Ein Aktivierung des Immunsystems durch H-1PV konnte bereits in unserer Arbeitsgruppe gezeigt werden.rnIn dieser Arbeit wurden wichtige Aspekte bezüglich der Aktivierung von Toll-like Rezeptoren bei einer H-1PV Infektion untersucht. Zunächst wurde die Rolle von TLRs nach der H-1PV Infektion untersucht. Humane embryonale Nierenzellen (HEK293) wurden stabil mit humanen TLRs transfiziert, um die Rolle spezifischer TLRs während der Aktivierung des Immunsystems zu untersuchen. TLR3 und TLR9 wurden durch eine H-1PV Infektion, die mit der NFκB-Translokation in den Zellkern korreliert, aktiviert. Mit Hilfe eines Reporterplasmides (pNiFty-Luc), wurde durch erhöhte Expression eines NFκB-induzierbaren Reportergens die NFκB-Aktivität im Anschluss an eine H-1PV Infektion nachgewiesen. Zudem wurde die immunologische Wirkung von H-1PV-induzierten Tumorzelllysaten (TCL) auf die humane antitumor-gerichtete Immunantworten analysiert. Ein humanes ex vivo-Modell, bestehend aus einer HLA-A2-positiven humanen Melanom-Zelllinie (SK29Mel) wurde verwendet, um Immunreaktionen mit entsprechenden HLA-restringierten humanen DCs zu untersuchen. DCs die mit H-1PV-infizierten SK29Mel Zellen koinkubiert wurden, zeigten eine erhöhte TLR3- und TLR9-Expression. Diese Daten deuten darauf hin, dass H-1PV-induzierte TCLs humane DCs stimulieren und dies zumindest teilweise durch TLR-abhängige Signalwege geschieht. Demnach wird eine DC-Reifung durch Kokultur mit H-1PV-induzierten TCLs über den TLR-Signalweg erreicht und führte u.a. zu einer NFκB-abhängigen Aktivierung des adaptiven Immunsystems. Die onkolytischen Virotherapie mit H-1PV erhöht so durch unterschiedliche Auswirkungen auf DCs die Immunreaktion und verstärkt die Anti-Tumor-Immunität. Diese Ergebnisse zeigen einen neuen potenziellen Ansatz für den Einsatz onkolytischer Viren für TLR-zielgerichtete Therapieoptionen und stellen eine ideale Möglichkeit zur Erweiterung der Krebsbehandlung dar.rn

Centro-sinistra e autonomia speciale. La DC trentina tra il 1955 e il 1968

La tesi è una ricerca di storia politica che affianca due diverse “storie” di centro-sinistra, quella nazionale e quella che vide protagonista la Democrazia Cristiana del Trentino. Lo studio analizza i fatti attraverso il filtro delle DC come se quello trentino e quello nazionale fossero due partiti, per poi tentare di capire ciò che accadeva alla loro sinistra alla ricerca dei diversi pesi e dei differenti equilibri che al centro e alla periferia si manifestavano nei rapporti con il PSI e con il PCI, e per osservare le reazioni della Chiesa così da valutare se le gerarchie romane e quelle trentine interagirono in modo differente sugli sviluppi delle rispettive esperienze politiche di quegli anni. Il testo è organizzato in quattro capitoli. Il primo e il secondo (speculari e dedicati allo stesso lustro: 1955-1960) rappresentano un confronto tra i differenti iter d’avvicinamento al centro-sinistra che la politica nazionale e quella trentina sperimentarono nella seconda metà degli anni Cinquanta. Nel terzo capitolo (1960-1964) e nel quarto (1964-1968) le vicende nazionali e quelle locali sono invece raccontate in modo intrecciato, ripercorrendo le diverse fasi dell’alleanza tra Democrazia Cristiana e Partito Socialista, e nel contempo dando conto della trasformazione del Trentino da una realtà di tipo agricolo ad una di tipo industriale, del passaggio da una comunità di tipo cattolico tradizionale ad una che si accinge a vivere in un contesto secolarizzato, e da una società che si autopercepisce come periferica ad una che ospita una delle contestazioni studentesche più peculiari, incisive e note d’Italia.

Die Rolle von Myosin 9b und LFA-1 in Dendritischen Zellen für die DC,T-Zellinteraktion und die Induktion einer Immunantwort

In dieser Arbeit wurde zum Einen, die Interaktionsphysiologie zwischen verschiedenen DC-Populationen und naiven sowie regulatorischen T-Zellen analysiert. Dabei wurde die Kontaktdauer und Häufigkeit bestimmt sowie die daraus folgende Aktivierung der T-Zellen in einer 3D-Kollagenmatrix. rnZum zweiten wurde die Rolle des Aktin-Motorproteins Myosin 9b, bei der Zellmigration sowie bei der DC-T-Zellinteraktion und der Ausbildung von Immunantworten untersucht. Myo9b KO DC weisen in vitro in einer Kollagenmatrix sowie in vivo einen gestörten Migrationsphänotyp auf. Auch die Interaktion mit T-Zellen ist verändert und sie induzieren eine reduzierte T-Zellaktivierung in einer 3D-Umgebung sowie eine geringere Immunreaktion in vivo. Die Zugabe pharmakologischer Inhibitoren der Rho-Signalkaskade konnte die Migration und das T-Zellstimulierungspotential wiederherstellen. rnZum Dritten wurde analysiert, welche Bedeutung die konstitutive Aktivierung des Adhäsionsmoleküls LFA-1 auf DC (LFA-1 d/d) hat. LFA-1 d/d DC zeigten verlängerte Interaktionszeiten mit T-Zellen, gefolgt von einer reduzierten T-Zellproliferation in einer Kollagenmatrix. Durch die Inhibition von aktivem LFA-1 auf den DC mittels blockierender Antikörper konnte eine Normalisierung der Interaktionsparameter und T-Zellproliferation auf Wildtyp-Niveau wiederhergestellt werden. Durch ein Ausschalten von CYTIP in WT DC und dem damit einhergehenden Verlust der Deaktivierbarkeit von LFA-1 über Cytohesin wurde ebenfalls eine erhöhte Interaktionszeit mit T-Zellen und eine reduzierte T-Zellproliferation beobachtet.rn

Etablierung eines humanisierten Mausmodells zur In-vivo-Analyse von DC-adressierenden Nanopartikeln

In dieser Arbeit wurde zunächst ein humanisiertes Mausmodell entwickelt für die Analyse von humanen DCs in vivo. Darüber hinaus wurden erste Versuche mit Nanopartikelbeladenen DCs durchgeführt, mit der Intention, durch diese Kombination humane DCs zu untersuchen. Es wurden immunsupprimierte NOD/LtSz-scid IL2R (NSG) Mäuse verwendet und mit humanen CD34+ PBSCs transplantiert. Es wurden insgesamt 14 Modelle getestet, mit einer durchschnittlichen Humanisierungsrate von 76 %. In allen Modellen konnten ab Woche sechs nach Transplantation humane CD45+ Zellen sowie humane Bund NK-Zellen und CD14+ Monozyten gefunden werden. Darüber hinaus waren myeloide DC-Vorläuferzellen, konventionelle HLA DR CD11c DCs (cDCs) und plasmazytoide DCs (pDCs) vorhanden. Humane T-Zellen konnten nicht vor Woche 18 nach Transplantation beobachtet werden. Neben der Rekonstitution humaner DCs in peripheren Organen, wurde ebenfalls nach gewebsständigen DCs, insbesondere den Langerhans Zellen (LCs) der Epidermis geschaut. Waren humane LC vorhanden, konnten diese ab Woche zwölf nach Transplantation in der murinen Epidermis detektiert werden. Diese waren konstant bis in Woche 30 nach Transplantation nachweisbar. In Hinblick auf die Etablierung der DCs in diesem humanisierten Mausmodells wurden verschiedene Einflussgrößen getestet. IL-7 führte zu keiner veränderten Hämatopoese, wohingegen Flt3L zu einer Zunahme von CD14+ Monozyten und cDCs führte. Darüber hinaus konnte eine drastische Abnahmernhumaner B-Zellen beobachtet werden. Es zeigte sich, dass der Zeitpunkt der Flt3LrnApplikation einen entscheidenen Faktor für den Effekt von Flt3L auf die Rekonstitution humaner Zellen darstellt. Für die in dieser Arbeit durchgeführten funktionellen in vivo Studien, wurden humanisierten Mäusen alloreaktive CD8+ T-Zellen appliziert. Somit sollte die Funktionalität der rekonstituierten humanen APCs getestet werden. Es wurde deutlich, dass Monozyten und DCs ihre Funktionalität erst ab Woche 14 nach Transplantation zu entwickeln schienen,rnwohingegen B-Zellen bereits zu früheren Zeitpunkten als Zielzellen für die alloreaktiven T-Zellen dienten. Dies wurde durch den Rückgang der jeweiligen Zellen nach Applikation der T-Zellen sichtbar. Zu erwähnen ist, dass das Anwachsen einer humanen Hämatopoese stark spenderabhängig ist und somit keine allgemeingültigen Aussagen hinsichtlich der in vivo Funktion getroffen werden können. Um im Gewebe verbliebende APCs zu manipulieren gibt es verschiedene Möglichkeiten. Im Rahmen dieser Arbeit wurden auf Polystyren-basierende Nanopartikel getestet. Die verwendeten Partikel hatten eine Größe von 80 bis 160 nm und waren unfunktionalisiert oder mit Amino- bzw. Carboxy-Gruppen versehen. Zusätzlich wurden die Partikel mit BODIPY (Durchflusszytometrie und kLSM-Messungen), einem Infrarotnahem Farbstoff IR 780 (BFI-Messungen) und Platin (in vivo Messungen) beladen. Der Carboxy-funktionalisierte Partikel zeigte den geringsten Einfluss auf die Vitalität von humanen DCs, wohingegen der Amino-funktionalisierte Partikel bei steigender Konzentration toxisch wirkte. Bei unfunktionalisierten Partikeln stieg die Toxizität bei zunehmender Konzentration. Hinsichtlich der Expression diverser DC spezifischer Oberflächenmoleküle nach Beladung mit Nanopartikeln zeigte sich, dass allein der unfunktionalisierte, mit Lutensol AT50 hergestellte Partikel zu einer leichten Hochregulation von MHC-Klasse-II Molekülen führte. Die Expression von CD86 wurde im Gegenzug nur durch die Beladung mit den Amino-, bzw. Carboxy funktionalisierten Partikeln und dem unfunktionalisierten, mit SDS hergestellten Partikel leicht gesteigert. Trotz der teilweise leicht veränderten Expression von Oberflächenmarkern, konnte mit Hilfe von IFN-g ELISpots keine Beeinflussungrnder Funktion als APCs von Nanopartikel-beladenen DCs beobachtet werden. In den in vivo Untersuchungen zeigten alle vier Partikel eine konstante Zirkulation imrnOrganismus und konnten bis 96 h nach Applikation nachgewiesen werden. Alle Partikel konnten primär in der Leber detektiert werden, wobei der unfunktionalisierte, mit Lutensol AT50 hergestelle Partikel das weiteste Verbreitungsmuster zeigte. Erste Versuche im humanisierten Mausmodell zeigten keine Beeinflussung der Verteilung und Kinetik von Nanopartikeln durch die humane Hämatopoese. Mit dem in dieser Arbeit etablierten humanisierten Mausmodell ist es möglich, die Entwicklung, Differenzierung, Aktivierung und Funktionalität humaner DCs in vivo zu untersuchen. Darüber hinaus kann das gezielte Adressieren von DCs in vivo analysiert werden, was sowohl die Möglichkeit der Manipulation von DCs zur Vermeidung einer akuten GvHD bietet als auch Verwendung in anderen DC-vermittelten Therapien (z.B.Vakzinationsstudien) findet.

The role of dendritic cells (DC) in Friend retrovirus-induced immunosuppression and immunotherapeutic applications of functionalized nanoparticles

Friend murine leukemia Virus (FV) infection of immunocompetent mice is a well- established model to acquire further knowledge about viral immune suppression mechanisms, with the aim to develop therapeutics against retrovirus-induced diseases. Interestingly, BALB/c mice are infected by low doses of FV and die from FV-induced erythroleukemia, while C57/BL6 mice are infected by FV only at high viral dose, and remain persistently infected for their whole life. Due to the central role of dendritic cells (DC) in the induction of anti-viral responses, we asked for their functional role in the genotype-dependent sensitivity towards FV infection. In my PhD study I showed that bone marrow (BM)-derived DC differentiated from FV-infected BM cells obtained from FV-inoculated BALB/c (FV susceptible) and C57BL/6 (FV resistant) mice showed an increased endocytotic activity and lowered expression of MHCII and of costimulatory receptors as compared with non-infected control BMDC. FV-infected BMDC from either mouse strain were partially resistant towards stimulation-induced upregulation of MHCII and costimulators, and accordingly were poor T cell stimulators in vitro and in vivo. In addition, FV-infected BMDC displayed an altered expression profile of proinflammator cytokines and favoured Th2 polarization. Ongoing work is focussed on elucidating the functional role of proteins identified as differentially expressed in FV-infected DC in a genotype-dependent manner, which therefore may contribute to the differential course of FV infection in vivo in BALB/c versus C57BL/6 mice. So far, more than 300 proteins have been identified which are differently regulated in FV-infected vs. uninfected DC from both mouse strains. One of these proteins, S100A9, was strongly upregulated specifically in BMDC derived from FV-infected C57BL/6 BM cells. S100A9-/- mice were more sensitive towards inoculation with FV than corresponding wild type (WT) mice (both C57BL/6 background), which suggests a decisive role of this factor for anti-viral defense. In addition, FV-infected S100A9-/- BMDC showed lower motility than WT DC. The future work is aimed to further elucidate the functional importance of S100A9 for DC functions. To exploit the potential of DC for immunotherapeutic applications, in another project of this PhD study the usability of different types of functionalized nanoparticles

Circuiti per il miglioramento della qualità di sorgenti dc

Tutti gli apparati elettronici richiedono un'alimentazione in tensione continua. Qualunque sia la fonte di energia elettrica, una batteria (in DC) o la rete di distribuzione (in AC), l’alimentatore ha il compito di regolare la tensione continua di uscita per consentire il corretto funzionamento del dispositivo alimentato. La stabilizzazione della tensione DC in uscita deve avvenire nonostante la presenza di ripple e di disturbi sulla alimentazione primaria, di ampie variazioni sulle correnti assorbite dal carico, di ampie escursioni di temperatura e deve essere garantita nel tempo, anche a fronte di sostituzione di alcuni componenti del circuito. In questa tesi si prenderanno in considerazione i regolatori lineari. Sebbene si tratti di circuiti che operano in condizioni di linearità e quindi, quasi per definizione, poco efficienti, in realtà il loro impiego diventa quasi obbligatorio per applicazioni in cui è richiesta una tensione di alimentazione poco rumorosa. Se utilizzati a valle di un alimentatore switching possono aumentare notevolmente la qualità della tensione di uscita operando con livelli di efficienza e di dissipazione del tutto accettabili e con minimo aumento di costo del sistema. Gli alimentatori lineari non sono dunque “superati” dai più recenti alimentatori switching ma sono, piuttosto, “alternativi” e, in molti alimentatori moderni, di complemento. Per questo motivo, anche di recente, sono stati sviluppati e trovano importanti quote di mercato innovative architetture di regolatori lineari dalle prestazioni molto migliorate e vi sono circuiti come il regolatore di John Linsley Hood che non possono non suscitare il più vivo interesse della comunità audiofila

Studio di fattibilità per l'applicazione dei "positive displacement motors" in ambienti HT-HP

Questo studio concerne uno studio di fattibilità per l'applicazione dei "positive displacement motors" in ambienti ambienti fortemente critici, soggetti ad alta pressione e alta temperatura. Tali motori sono utilizzati nell'industria Oil & Gas per la perforazione di pozzi petroliferi. L’analisi è stata portata a termine attraverso definizione dell’intervallo di temperatura per cui le performance degli strumenti in commercio presenta il maggior numero di failures, compreso tra i 175°C e i 225°C , e per il quale si vuole riuscire a limitare i rischi connessi e le criticità associate, garantendo così il raggiungimento dei target con un maggior grado di affidabilità e disponibilità del PDM utilizzato. Analizzando le sollecitazioni agenti sul motore durante le fasi di utilizzo, è stato possibile rilevare le principali cause di rottura e malfunzionamento che, nella maggior parte dei casi, possono essere attribuite al rigonfiamento e alla degradazione del materiale elastomerico che costituisce lo statore della power section. Investigando in merito alle differenze e alle proprietà di resistenza di numerosi materiali elastomerici a diversi range di temperatura, sono stati evidenziati dei margini di ottimizzazione in particolare relativi alla potenziale riduzione e totale sostituzione della superficie elastomerica con materiale metallico. Ciò ha fatto si che fosse necessario un approfondimento sulle caratteristiche degli acciai e delle leghe metalliche, in termini di resistenza a corrosione, costo del materiale, resistenza meccanica e della capacità di mantenere elevate proprietà meccaniche con l’aumento della temperatura, al fine di individuare i migliori “candidati” per sostituire interamente il materiale elastomerico dello statore in materiale metallico e risolvere così il problema dell’applicazione dei PDM in ambienti HT-HP.

Studio di un azionamento brushless di tipo predittivo per la trazione in un veicolo elettrico ibrido

Nel campo dell’automotive, negli ultimi anni, gli sviluppi sono stati consistenti: infatti sono state introdotte sul mercato molte novità, tra le quali vetture con propulsione elettrica o ibrida. Il controllo del motore termico durante il moto è studiato da moltissimi anni, mentre il controllo di un motore elettrico è tuttora in fase di continua ricerca e sviluppo. Infatti, con l’introduzione di tecniche vettoriali, si sono ottenuti notevoli miglioramenti a livello di qualità di utilizzo del motore elettrico stesso. In particolare, l’introduzione di un nuovo metodo di controllo che prende il nome di “controllo predittivo” cerca di ottimizzare ulteriormente la propulsione elettrica. Oggetto di studio in questa tesi è il controllo predittivo implementato per la regolazione delle correnti di statore in un motore brushless. Dopo una presentazione di carattere generale, che spazia dalle tipologie di vetture elettriche alle batterie utilizzate a bordo, passando dai vari tipi di propulsori elettrici verosimilmente utilizzabili, viene descritto, a livello teorico, il sistema utilizzato nelle simulazioni in questa tesi, prestando particolare attenzione alla macchina sincrona brushless a magneti permanenti ed al suo controllo vettoriale oltre che alla tecnica per un corretto deflussaggio. Successivamente sono descritti il controllo predittivo di corrente utilizzato nelle simulazioni, con un occhio di riguardo alla compensazione del ritardo di calcolo necessario per ottimizzare ulteriormente il controllo del motore di trazione elettrico, e la modellizzazione del veicolo elettrico ibrido in ambiente Simulink di Matlab, rimandando alle Appendici A e B per la eventuale consultazione dei codici implementati. Infine sono presentati i risultati ottenuti con vari tipi di prove per verificare se effettivamente il veicolo esegue ciò che è richiesto.

High numbers of DC-SIGN+ dendritic cells in lesional skin of cutaneous T-cell lymphoma

The role of dendritic cells (DCs) in disease progression of primary cutaneous T-cell lymphoma (CTCL) is not well understood. With their unique ability to induce primary immune responses as well as immunotolerance, DCs play a critical role in mediation of anti-tumor immune responses. Tumor-infiltrating DCs have been determined to represent important prognostic factors in a variety of human tumors.