Yellow ZnxNi1-xWO4 pigments obtained using a polymeric precursor method

New tungstate-based ceramic pigments, displaying ZnxNi1-xWO4 stoichiometry, were obtained at low temperature using a polymeric precursor method. The powder precursors were milled in an attritor mill in an alcoholic rnedium and heat treated for 12 h. yielding homogeneous and crystalline powder pigments. Characterization (TG/DTA, XRD, IR and colorimetry) showed that mass loss increased with increasing Zn contents. Despite the presence of secondary phases and impurities, the wolframite phase was present in all samples. IR analysis revealed bands related to Me-O and [WO6](6-) group stretching was observed. The intensity of the yellow color of the pigments increased with increasing amount of nickel. (c) 2007 Elsevier Ltd. All fights reserved.

Evaluation of survey methods for sampling anuran species richness in the neotropics.

Species richness is central to ecological theory, with practical applications in conservation, environmental management and monitoring. Several techniques are available for measuring species richness and composition of amphibians in breeding pools, but the relative efficacy of these methods for sampling high-diversity Neotropical amphibian fauna is poorly understood. I evaluated seven studies from south and south-eastern Brazil to compare the relative and combined effectiveness of two methods for measuring species richness at anuran breeding pools: acoustic surveys with visual encounter of adults and dipnet surveys of larvae. I also compared the relative efficacy of each survey method in detecting species with different reproductive modes. Results showed that both survey methods underestimated the number of species when used separately; however, a close approximation of the actual number of species in each breeding pool was obtained when the methods were combined. There was no difference between survey methods in detecting species with different reproductive modes. These results indicate that researchers should employ multiple survey methods that target both adult and larval life history stages in order to accurately assess anuran species richness at breeding pools in the Neotropics.

The carpal pad as an alternative sampling site for blood glucose testing in dogs

To investigate the feasibility and validity of sampling blood from the carpal pad in hospitalised healthy and diabetic dogs. METHODS The carpal pad was compared to the ear as a sampling site in 60 dogs (30 healthy and 30 diabetic dogs). RESULTS Lancing the pads was very well tolerated. The average glucose concentrations in blood samples obtained from the ears and carpal pads exhibited a strong positive correlation (r = 0.938) and there were no significant differences between them (P = 0.914). In addition, 98.3% of the values obtained were clinically acceptable when assessed by the error grid analysis. CLINICAL SIGNIFICANCE The carpal pad is a good alternative sampling site for home monitoring, especially in animals with a soft and/or light-coloured pad.

Distribuição de poros e densidade de latossolos submetidos a diferentes sistemas de uso e manejo

Man cultivates the soil for centuries, but the intensive business and use of the soils under Cerrado vegetation for agricultural production grew out of the seventies. The objective of this study was to evaluate soil physical characteristics as a function of sampling time and the soil uses in a Cerrado area in Uberlandia City - MG, Brazil. The managements were adopted: degraded pasture (M-1), conventional tillage (M-2), minimum tillage (M-3), tillage absence (M-4), no-tillage (NT) for three years (M-5); NT for nine years (M-6), NT for three years after Pinus (M-7), PD for one year after Pinus (M-8) and Pinus forest (M-9) with 25 years old. The evaluations were conducted in 2002/03 growing season, in two areas. The soils were: area 1, an Oxisol (Red Latosol - LV-1, M-1 through M-5) and area 2, two Oxisols (Red Latosol and Red-Yellow Latosol - LVA and LV-2, M-6 through M-9). The physical attributes studied changed depending of the soil class, sampling time and management systems, with emphasis on the area 2 soils, which, in general, better preserved its main physical attributes. Managements with intense tillage, such as the M-2, are the most soil physically degrade, presenting mostly negative changes to soil bulk density, total porosity, microporosity and macroporosity. Since the systems which promote less tillage, in short term, to preserve desirable physical attributes. The M-9 system had the lowest attributes range, compared to the others.

X̄ chart with variable sample size and sampling intervals

Recent theoretical studies have shown that the X̄ chart with variable sampling intervals (VSI) and the X̄ chart with variable sample size (VSS) are quicker than the traditional X̄ chart in detecting shifts in the process. This article considers the X̄ chart with variable sample size and sampling intervals (VSSI). It is assumed that the amount of time the process remains in control has exponential distribution. The properties of the VSSI X̄ chart are obtained using Markov chains. The VSSI X̄ chart is even quicker than the VSI or VSS X̄ charts in detecting moderate shifts in the process.

Cumulative effects of vinasse on the characteristics of red-yellow latosols under cerrado vegetation

Vinasse, a liquor effluent from the alcohol and sugar making industry, was applied annually for twelve years to medium-textured red-yellow latosols under cerrado vegetation sensu stricto, to study the environmental impacts on the biotic and abiotic factors. Four plots were established of which two acted as control and the other two received annual doses of vinasse. The studies were begun in 1980 when the first annual dose of 20 L m-2 year-1 was added to the soil without removing the top scrub layer. Theses doses were added to the soil until 1983, but in 1984 the doses were increased to 50 L m-2 year-1 and used until 1991. Soil samples were taken at a depth of 15 cm every three months from 1987 to 1991. Twenty seven environmental variables in the vinasse-treated and untreated plots were studied. These factors consisted of different enzymatic activities, a number of filamentous fungi, bacteria, actinomycetes and other micro-organisms, nutrients and some micro-climatic factors. The results obtained were statistically analyzed using the Tukey test, Pearson correlation and variance test methods with replicates and three factors. Matrices were determined using the correlation coefficient method and were compared with those of earlier published studies in the same area. The comparison of the results helped characterize changes in the environmental factors studied and in the correlation between them, after using annual cumulative doses of vinasse. Positive effects were observed only for the first six years of this application but vinasse had negative effects after the seventh year. It is concluded that medium-textured red-yellow latosols cannot be treated with vinasse for proloned periods.

VSSI X̄ charts with sampling at fixed times

A standard X̄ chart for controlling the process mean takes samples of size n0 at specified, equally-spaced, fixed-time points. This article proposes a modification of the standard X chart that allows one to take additional samples, bigger than n0, between these fixed times. The additional samples are taken from the process when there is evidence that the process mean moved from target. Following the notation proposed by Reynolds (1996a) and Costa (1997) we shortly call the proposed X chart as VSSIFT X chart where VSSIFT means variable sample size and sampling intervals with fixed times. The X chart with the VSSIFT feature is easier to be administered than a standard VSSI X chart that is not constrained to sample at the specified fixed times. The performances of the charts in detecting process mean shifts are comparable. Copyright © 1998 by Marcel Dekker, Inc.

Joint X̄ and R Charts with Variable Sample Sizes and Sampling Intervals

Recent studies have shown that the X̄ chart with variable sampling intervals (VSI) and/or with variable sample sizes (VSS) detects process shifts faster than the traditional X̄ chart. This article extends these studies for processes that are monitored by both the X̄ and R charts. A Markov chain model is used to determine the properties of the joint X and R charts with variable sample sizes and sampling intervals (VSSI). The VSSI scheme improves the joint X̄ and R control chart performance in terms of the speed with which shifts in the process mean and/or variance are detected.

Use of the internal standardization for difficult sampling by graphite furnace atomic absorption spectrometry

This work shows the potentiality of As as internal standard to compensate errors from sampling of sparkling drinking water samples in the determination of selenium by graphite furnace atomic absorption spectrometry. The mixture Pd(NO 3) 2/Mg(NO 3) 2 was used as chemical modifier. All samples and reference solutions were automatically spiked with 500 μg l -1 As and 0.2% (v/v) HNO 3 by the autosampler, eliminating the need for manual dilutions. For 10 μl dispensed sample into the graphite tube, a good correlation (r=0.9996) was obtained between the ratio of analyte absorbance by the internal standard absorbance and the analyte concentrations. The relative standard deviations (R.S.D.) of measurements varied from 0.05 to 2% and from 1.9 to 5% (n=12) with and without internal standardization, respectively. The limit of detection (LD) based on integrated absorbance was 3.0 μg l -1 Se. Recoveries in the 94-109% range for Se spiked samples were obtained. Internal standardization (IS) improved the repeatability of measurements and increased the lifetime of the graphite tube in ca. 15%. © 2004 Elsevier B.V. All rights reserved.

Variabilidade espacial das propriedades físicas e químicas do solo em áreas intensamente cultivadas

The spatial variability of physical and chemical properties of soil were evaluated to provide subsidies for management of the agricultural input. The chemical variables: P, organic matter (OM), K, Ca, Mg, pH, CEC and base saturation (BS); and physical variables: sand and clay were analysed. Soil samples were collected at two depths (0-0.2 and 0.6-0.8 m) located at irregular mesh of sampling in the region of Monte Alto, in a Yellow-Red Podzol (Alfissolo) (PVA), under different managements, resulting in 88 points in 1465 ha of total area; and at the region of Jaboticabal in a Red Latosol (LV) cultivated with sugarcane, resulting in 128 points in 2597 ha of total area. The chemical and physical soil properties studied showed spatial dependence, except CEC in 0.6-0.8 m layer for LV; Ca and clay at 0-0.2 m layer and P, OM, K, Mg, sand and clay in 0.6-0.8 m layer for PVA. The chemical and physical variables studied were adjusted to spherical and exponential models and some of them showed semivariogram without defined structure. The PVA showed low spatial continuity of chemical and physical properties, mainly in 0.6-0.8 m layer, which suffers less antropic influence. The LV soil showed more homogenous zones of fertility and granulometric composition.

Selection of environmental temperature by the yellow scorpion Tityus serrulatus Lutz & Mello, 1922 (Scorpiones, Buthidae)

The preferred temperature of the yellow scorpion Tityus serrulatus was investigated since its dispersion is a matter of concern. Adult T. serrulatus, weighing 1.24 ± 0.20 g (mean + sd) and with a standard length of 59.3 ± 2.5 mm, were used. A metallic corridor (120 cm long, 5 cm large and 10 cm high) with thermal gradient ranging from 0°C to 40°C was used. Tityus serrulatus chose and stayed in temperatures ranging from 14° C to 38°C when safe conditions were offered (dark and thigmotactic stimuli). The number of animals that remained in the 11°C-20°C, 21°C-30°C, and 31°C-40°C temperature zones were 8, 8, and 9, respectively. The chi-square test (degree of freedom = 2) showed that differences were not significant (p>0.05). Some animals moved to lower temperature areas (less than 8°C) when the corridor was completely illuminated and thigmotactic stimuli were absent, which led the animals to present a torpor state. It is concluded that T. serrulatus does not select a specific environmental temperature. Associated with the capacity of temporally surviving at low temperatures, this species seems to be highly adaptable to different thermal zones.

Influence of temperature and concentration on thermophysical properties of yellow mombin (Spondias mombin, L.)

Thermal conductivity, thermal diffusivity, and density of yellow mombin juice were determined at 8.8-49.4 °Brix and at temperature from 0.4 to 77.1 °C. Apparent viscosity was also measured between 7.8 and 30 °Brix and at temperature from 0 to 60 °C. Yellow mombin juice was produced from fruits of two different batches and the concentration process was performed using a roto evaporator or a rising film evaporator, single effect, with recirculation, under vacuum, to obtain concentrated juice. In order to obtain different concentrations, concentrated juice was diluted with distilled water. Multiple regression analysis was performed to fit thermal conductivity, thermal diffusivity and density experimental data obtaining a good fit. Arrhenius and power law relationships were proposed to fit apparent viscosity as a function of temperature and juice concentration at typical shear rates found during processing. The rheological parameters together with experimental values of pressure loss in tube flow were used to calculate friction factors, which were compared to those resulting from theoretical equation.

Synthetic control charts with two-stage sampling for monitoring bivariate processes

In this article, we consider the synthetic control chart with two-stage sampling (SyTS chart) to control bivariate processes. During the first stage, one item of the sample is inspected and two correlated quality characteristics (x;y) are measured. If the Hotelling statistic T1 2 for these individual observations of (x;y) is lower than a specified value UCL 1 the sampling is interrupted. Otherwise, the sampling goes on to the second stage, where the remaining items are inspected and the Hotelling statistic T2 2 for the sample means of (x;y) is computed. When the statistic T2 2 is larger than a specified value UCL2, the sample is classified as nonconforming. According to the synthetic control chart procedure, the signal is based on the number of conforming samples between two neighbor nonconforming samples. The proposed chart detects process disturbances faster than the bivariate charts with variable sample size and it is from the practical viewpoint more convenient to administer.