Relation between plaque type, plaque thickness, blood shear stress, and plaque stress in coronary arteries assessed by X-ray Angiography and Intravascular Ultrasound

Purpose: Atheromatic plaque progression is affected, among others phenomena, by biomechanical, biochemical, and physiological factors. In this paper, the authors introduce a novel framework able to provide both morphological (vessel radius, plaque thickness, and type) and biomechanical (wall shear stress and Von Mises stress) indices of coronary arteries. Methods: First, the approach reconstructs the three-dimensional morphology of the vessel from intravascular ultrasound(IVUS) and Angiographic sequences, requiring minimal user interaction. Then, a computational pipeline allows to automatically assess fluid-dynamic and mechanical indices. Ten coronary arteries are analyzed illustrating the capabilities of the tool and confirming previous technical and clinical observations. Results: The relations between the arterial indices obtained by IVUS measurement and simulations have been quantitatively analyzed along the whole surface of the artery, extending the analysis of the coronary arteries shown in previous state of the art studies. Additionally, for the first time in the literature, the framework allows the computation of the membrane stresses using a simplified mechanical model of the arterial wall. Conclusions: Circumferentially (within a given frame), statistical analysis shows an inverse relation between the wall shear stress and the plaque thickness. At the global level (comparing a frame within the entire vessel), it is observed that heavy plaque accumulations are in general calcified and are located in the areas of the vessel having high wall shear stress. Finally, in their experiments the inverse proportionality between fluid and structural stresses is observed.

Iowa Water Plan '78 The Framework Study - Summary Report

Iowa Natural Resources Council's Water Plan 78, the main report of the State Water Plan Framework Study. This report is the culmination of the three-year cooperative effort between this agency and the Department of Environmental Quality, Conservation Commission, Department of Soil Conservation, and the Geological Survey, funded by the Legislature in 1978.

Information and risk management during the first trimester care for pregnant women: Some reflections about the ethical challenges and the legal framework in Switzerland. [L'information et la gestion des risques dans le suivi de la grossesse lors du 1er trimestre : quelques réflexions sur le défi éthique et le cadre légal en Suisse.]

The progress in prenatal medicine raises complex questions with respect to the physician-patient relationship. The physician needs to reconcile medical aspects, ethical principles as well as judicial norms. Already, during the first trimester, the physician has to put into practice the schedule combining for each individual pregnancy physical, laboratory and other appropriate exams. Physicians are under the obligation to inform in a clear and comprehensive way without creating unnecessary anxiety for their patients. Legal requirements include informed consent, the respect for the patient's right to self-determination, and compliance with the Swiss federal law on genetic testing, especially with its articles on prenatal screening and diagnosis. This article discusses the complexity of obstetrical practice when it comes to delivering adequate information within the scope of ethical and legal requirements in Switzerland. L'évolution de la médecine prénatale soulève des enjeux complexes dans la relation médecin-patient. Il s'agit de concilier à la fois les aspects médicaux, les principes éthiques et les normes juridiques. Dès le premier trimestre de la grossesse le médecin doit poser le cadre du suivi et des examens appropriés pour chaque grossesse. Son devoir est d'informer de manière claire et précise sans inquiéter inutilement, en respectant l'exigence légale d'un consentement éclairé et plus largement le droit de la patiente à l'autodétermination ainsi que le cadre de la loi fédérale suisse sur l'analyse génétique humaine dans le domaine du dépistage et du diagnostic prénatal. Cet article discute de la complexité de l'information et de l'application des principes éthiques et légaux dans la pratique obstétricale en Suisse.

Introducing blended learning into a Master Program in Nursing Sciences: a first exploration of a holistic evaluation framework

This contribution presents the first stage of a project to assist the transition of a traditional to a blended program in higher nursing education. We shall describe the goals and context of this project, present the evaluation framework, discuss some early results and then discuss the usefulness of the first version of the evaluation framework.

A Security Framework for JXTA-Overlay

En l'actualitat, la maduresa del camp de la investigació P2P empès a través de nous problemes, relacionats amb la seguretat. Per aquesta raó, la seguretat comença a convertir-se en una de les qüestions clau en l'avaluació d'un sistema P2P, i és important proporcionar mecanismes de seguretat per a sistemes P2P. El projecte JXTAOverlay fa un esforç per utilitzar la tecnologia JXTA per proporcionar un conjunt genèric de funcions que poden ser utilitzades pels desenvolupadors per desplegar aplicacions P2P. No obstant això, encara que el seu disseny es va centrar en qüestions com ara l'escalabilitat o el rendiment general, no va tenir en compte la seguretat. Aquest treball proposa un marc de seguretat, adaptat específicament a la idiosincràsia del JXTAOverlay.

Securing a Java P2P framework: The JXTA-Overlay case

In the wake of the success of Peer-to-Peer (P2P) networking, security has arisen as one of its main concerns, becoming a key issue when evaluating a P2P system. Unfortunately, some systems' design focus targeted issues such as scalabil-ity or overall performance, but not security. As a result, security mechanisms must be provided at a later stage, after the system has already been designed and partially (or even fully) implemented, which may prove a cumbersome proposition. This work exposes how a security layer was provided under such circumstances for a specic Java based P2P framework: JXTA-Overlay.

Maca - a configurable tool to integrate Polish morphological data

There are a number of morphological analysers for Polish. Most of these, however, are non-free resources. What is more, different analysers employ different tagsets and tokenisation strategies. This situation calls for a simpleand universal framework to join different sources of morphological information, including the existing resources as well as user-provided dictionaries. We present such a configurable framework that allows to write simple configuration files that define tokenisation strategies and the behaviour of morphologicalanalysers, including simple tagset conversion.

Occasional adnominal idiom modification : a cognitive linguistic approach

abstract:occasional Adnominal Idiom Modification - A Cognitive Linguistic Approach From a cognitive-linguistic perspective, this paper explores alternative types of adnoniinal modification in occasional variants of English verbal idioms. Being discussed against data extracted from the British National Corpiis (BNC), the model claims that in idioni-production idiomatic constructions are activated as complex linguistic schemas to code a context-specific target-conceptualisation. Adnominal pre- and postmodifications are one specific form of creative alteration to adapt the idiom for this purpose. Semantically, idiom-interna1 NPextension is not a uniforni process. It is necessary to distinguish two systematic types of adnominal modification: external and internal modification (Ernst 1981). While external NPmodification has adverbial function, ¡.e. it modifies the idiom as a unit, internal modification directly applies to the head-noun and thus depends on the degree of motivation and analysability of a given idiom. Following the cognitive-linguistic framework, these dimensions of idiom-transparency result from the language user's ability to remotivate the bipartite semantic structure by conceptual metaphors and metonymies.

Joint array combining and MLSE for single-user receivers in multipath Gaussian multiuser channels

The well-known structure of an array combiner along with a maximum likelihood sequence estimator (MLSE) receiveris the basis for the derivation of a space-time processor presentinggood properties in terms of co-channel and intersymbol interferencerejection. The use of spatial diversity at the receiver front-endtogether with a scalar MLSE implies a joint design of the spatialcombiner and the impulse response for the sequence detector. Thisis faced using the MMSE criterion under the constraint that thedesired user signal power is not cancelled, yielding an impulse responsefor the sequence detector that is matched to the channel andcombiner response. The procedure maximizes the signal-to-noiseratio at the input of the detector and exhibits excellent performancein realistic multipath channels.

Software Process Modeling with Eclipse Process Framework

The software development industry is constantly evolving. The rise of the agile methodologies in the late 1990s, and new development tools and technologies require growing attention for everybody working within this industry. The organizations have, however, had a mixture of various processes and different process languages since a standard software development process language has not been available. A promising process meta-model called Software & Systems Process Engineering Meta- Model (SPEM) 2.0 has been released recently. This is applied by tools such as Eclipse Process Framework Composer, which is designed for implementing and maintaining processes and method content. Its aim is to support a broad variety of project types and development styles. This thesis presents the concepts of software processes, models, traditional and agile approaches, method engineering, and software process improvement. Some of the most well-known methodologies (RUP, OpenUP, OpenMethod, XP and Scrum) are also introduced with a comparison provided between them. The main focus is on the Eclipse Process Framework and SPEM 2.0, their capabilities, usage and modeling. As a proof of concept, I present a case study of modeling OpenMethod with EPF Composer and SPEM 2.0. The results show that the new meta-model and tool have made it possible to easily manage method content, publish versions with customized content, and connect project tools (such as MS Project) with the process content. The software process modeling also acts as a process improvement activity.

Tietojärjestelmäinvestoinnin jälkitarkkailumalli

Tämän työn ensisijaisena tavoitteena oli kehittää tietojärjestelmähankkeiden investointiprosessia luomalla kohdeyritykseen yhtenäinen toimintatapa hankkeiden jälkitarkkailuun. Tavoiteltu muutos koskee järjestelmäinvestointien arviointiperusteita sekä niiden käyttöönoton jälkeistä seurantaa. Jälkitarkkailumalli on rakennettu tasapainotettujen mittaristojen viitekehyksestä mittaamalla onnistumista johdon, loppukäyttäjän sekä projektin näkökulmasta. Työn tuloksena on Excel -sovellus sekä toimintatapa sovelluksen käytölle. Esimerkki-investoinnista kerätyn kokemuksen perusteella malli tukee investointiin liittyvien sidosryhmien sitoutumista yhteisiin tavoitteisiin sekä selkeyttää roolijakoa IT - vetoisen projektiryhmän ja yrityksen liiketoiminnallisen johdon välillä. Lisäksi mallin koettiin tukevan käyttöönotetun järjestelmän tavoitelähtöistä johtamista. Käytön laajentuessa mallilla uskotaan olevan yksittäistenhankkeiden lisäksi positiivinen vaikutus myös yrityksen tietojärjestelmähankkeiden investointiprosessiin.

Maximum likelihood estimation of position in GNSS

In this letter, we obtain the Maximum LikelihoodEstimator of position in the framework of Global NavigationSatellite Systems. This theoretical result is the basis of a completelydifferent approach to the positioning problem, in contrastto the conventional two-steps position estimation, consistingof estimating the synchronization parameters of the in-viewsatellites and then performing a position estimation with thatinformation. To the authors’ knowledge, this is a novel approachwhich copes with signal fading and it mitigates multipath andjamming interferences. Besides, the concept of Position–basedSynchronization is introduced, which states that synchronizationparameters can be recovered from a user position estimation. Weprovide computer simulation results showing the robustness ofthe proposed approach in fading multipath channels. The RootMean Square Error performance of the proposed algorithm iscompared to those achieved with state-of-the-art synchronizationtechniques. A Sequential Monte–Carlo based method is used todeal with the multivariate optimization problem resulting fromthe ML solution in an iterative way.

Implementing Microsoft .NET Framework for Bitumen-Extranet

Ohjelmistoprojektit pohjautuvat nykyään useasti osittain itsenäisesti suunniteltujen ja; toteutettujen ohjelmakomponenttien yhdistelemiseen. Tällä keinolla voidaan vähentää kehitystyön; viemää aikaa ja kustannuksia, jotta saadaan tuotettua kilpailukykyisempiä ohjelmistoja.; Tässädokumentissa käsitellään komponenttipohjaisen ohjelmistotuotannon näkökulmia ja; Microsoft .NET Framework ympäristöä, joka on kehitysympäristö komponenttipohjaisille; ohjelmistoille. Lisäksi esitellään tapauskohtainen ohjelmistoprojekti extranet-verkon; toteutukseen.

Automated User Interface testing in Symbian Operating System

Tässä diplomityössä tutkitaan automatisoitua testausta ja käyttöliittymätestauksen tekemistä helpommaksi Symbian-käyttöjärjestelmässä. Työssä esitellään Symbian ja Symbian-sovelluskehityksessä kohdattavia haasteita. Lisäksi kerrotaan testausstrategioista ja -tavoista sekä automatisoidusta testaamisesta. Lopuksi esitetään työkalu, jolla testitapausten luominen toiminnalisuus- ja järjestelmätestaukseen tehdään helpommaksi. Graafiset käyttöliittymättuovat ainutlaatuisia haasteita ohjelmiston testaamiseen. Ne tehdään usein monimutkaisista komponenteista ja niitä suunnitellaan jatkuvasti uusiksi ohjelmistokehityksen aikana. Graafisten käyttöliittymien testaukseen käytetään usein kaappaus- ja toistotyökaluja. Käyttöliittymätestauksen testitapausten suunnittelu ja toteutus vaatii paljon panostusta. Koska graafiset käyttöliittymät muodostavat suuren osan koodista, voitaisiin säästää paljon resursseja tekemällä testitapausten luomisesta helpompaa. Käytännön osuudessa toteutettu projekti pyrkii tähän tekemällä testiskriptien luomisesta visuaalista. Näin ollen itse testien skriptikieltä ei tarvitse ymmärtää ja testien hahmottaminen on myös helpompaa.