Effect of incorporation of amaranth on the physical properties and nutritional value of cheese bread

At the present celiac disease has no known cure, and its only treatment is a strict lifelong adherence to a gluten-free diet. Cheese bread is a traditional Brazilian product and a safe option for celiacs. However, like other gluten-free breads, it has inherent low levels of fibers and minerals. The objective of this study was to evaluate the effect of incorporation of whole amaranth flour on the physical properties and nutritional value of cheese bread. Amaranth flour was incorporated at 10, 15, and 20% proportions in different formulations. The increasing amaranth levels darkened the product, reduced specific volume, and increased compression force. Ten percent amaranth-content cheese breads exhibited slight differences in physical properties compared with the controls. These results demonstrated the possibility of incorporating 10% of whole amaranth flour in the formulation of cheese bread resulting in a product with higher dietary fiber and iron contents and the same level of acceptance as that of the conventional formulation. The aim of this approach is to increase the availability of gluten-free bakery products with added nutritional value contributing to increase the variety of the diet of celiac patients.

Por uma disciplina rigorosa e ilustrada: a inspeção na capital do império

O objetivo deste estudo é analisar os procedimentos manejados na fiscalização de professores primários, por meio do estudo a respeito do serviço de inspeção da instrução na Corte Imperial, a partir de sua institucionalização com base no Regulamento da Instrução Primária e Secundária da Corte em 1854. Na pesquisa procurou-se discutir como a visibilidade dada à escola e aos seus atores, via inspeção, permitiram inseri-los em um esquema disciplinar, cujos efeitos encontram-se articulados e justificados em nome de um projeto de ordenação e civilização da capital do Império brasileiro.

A mathematical model for optimizing the indications of liver transplantation in patients with hepatocellular carcinoma

Abstract Background The criteria for organ sharing has developed a system that prioritizes liver transplantation (LT) for patients with hepatocellular carcinoma (HCC) who have the highest risk of wait-list mortality. In some countries this model allows patients only within the Milan Criteria (MC, defined by the presence of a single nodule up to 5 cm, up to three nodules none larger than 3 cm, with no evidence of extrahepatic spread or macrovascular invasion) to be evaluated for liver transplantation. This police implies that some patients with HCC slightly more advanced than those allowed by the current strict selection criteria will be excluded, even though LT for these patients might be associated with acceptable long-term outcomes. Methods We propose a mathematical approach to study the consequences of relaxing the MC for patients with HCC that do not comply with the current rules for inclusion in the transplantation candidate list. We consider overall 5-years survival rates compatible with the ones reported in the literature. We calculate the best strategy that would minimize the total mortality of the affected population, that is, the total number of people in both groups of HCC patients that die after 5 years of the implementation of the strategy, either by post-transplantation death or by death due to the basic HCC. We illustrate the above analysis with a simulation of a theoretical population of 1,500 HCC patients with tumor size exponentially. The parameter λ obtained from the literature was equal to 0.3. As the total number of patients in these real samples was 327 patients, this implied in an average size of 3.3 cm and a 95% confidence interval of [2.9; 3.7]. The total number of available livers to be grafted was assumed to be 500. Results With 1500 patients in the waiting list and 500 grafts available we simulated the total number of deaths in both transplanted and non-transplanted HCC patients after 5 years as a function of the tumor size of transplanted patients. The total number of deaths drops down monotonically with tumor size, reaching a minimum at size equals to 7 cm, increasing from thereafter. With tumor size equals to 10 cm the total mortality is equal to the 5 cm threshold of the Milan criteria. Conclusion We concluded that it is possible to include patients with tumor size up to 10 cm without increasing the total mortality of this population.

Mycobacterium Bovis como agente causal da tuberculose humana

O Mycobacterium bovis incluído no complexo Mycobacterium tuberculosis pode infectar várias espécies de animais domésticos e silvestres. Embora acometa principalmente animais da espécie bovina também pode infectar outros mamíferos e inclusive os seres humanos, nos quais determina um quadro clínico indistinguível do causado pelo M. tuberculosis. Em diversos países desenvolvidos, devido à aplicação de rigorosas medidas de controle e consequente redução da prevalência da tuberculose bovina, bem como de infecções em outras espécies de animais pelo M. bovis houve em decréscimo dos níveis de ocorrência desta patologia e o tema passou a ser considerado de menor importância. No entanto, nos países em desenvolvimento, a infecção por M. bovis ainda representa um importante risco para a saúde pública, pois tem sido observada nos animais domésticos, silvestres e em seres humanos. O presente trabalho analisa a importância da infecção pelo Mycobacterium bovis em termos de saúde pública.

Stochastic quantization of the spherical model and supersymmetry.

In this work, we reported some results about the stochastic quantization of the spherical model. We started by reviewing some basic aspects of this method with emphasis in the connection between the Langevin equation and the supersymmetric quantum mechanics, aiming at the application of the corresponding connection to the spherical model. An intuitive idea is that when applied to the spherical model this gives rise to a supersymmetric version that is identified with one studied in Phys. Rev. E 85, 061109, (2012). Before investigating in detail this aspect, we studied the stochastic quantization of the mean spherical model that is simpler to implement than the one with the strict constraint. We also highlight some points concerning more traditional methods discussed in the literature like canonical and path integral quantization. To produce a supersymmetric version, grounded in the Nicolai map, we investigated the stochastic quantization of the strict spherical model. We showed in fact that the result of this process is an off-shell supersymmetric extension of the quantum spherical model (with the precise supersymmetric constraint structure). That analysis establishes a connection between the classical model and its supersymmetric quantum counterpart. The supersymmetric version in this way constructed is a more natural one and gives further support and motivations to investigate similar connections in other models of the literature.

Maturation of humoral immune responses : Studies on the effects of antigen type, apoptosis and age

The humoral immune response is dependent on the formation of antibodies. Antibodies are produced by terminally differentiated B cells, plasma cells. Plasma cells are generated either directly from antigen challenged B cells, memory cells or from cells that have undergone the germinal center (GC) reaction. The GC is the main site for class switch, somatic hypermutation and generation of memory cells. Different factors, both internal and external, shape the outcome of the immune response. In this thesis, we have studied a few factors that influence the maturation of the humoral response. We have studied how age affects the response, and we show that responses against thymus dependent antigens (TD) are more affected than responses to thymus independent (TI) antigens, in concordance with the view that the T cell compartment is more affected by age than the B cell compartment. Furthermore, we demonstrate that priming early in life have a big influence on the immune response in the aged individual. Priming with a TI form of the carbohydrate dextran B512 (Dx) induces a reduction of IgG levels in later TD responses against Dx. We have evaluated possible mechanisms for this reduction. The reduction does not seem to be caused by clonal exhaustion or antibody mediated mechanisms. We also showed that the reduced TD response after TI priming can be induced against another molecule than Dx. With the hypothesis that TI antigens induce a plasma cell biased maturation of the responding B cells, we examined the presence of Blimp-1, a master regulator of plasma cell differentiation, in GCs induced by TD and TI antigen. Blimp-1 was found earlier in GCs induced by TI antigen and the staining intensity in these GCs was stronger than in TD antigen induced GCs, indicating that plasma cells might be continuously recruited from these GCs. B cells undergoing the GC reaction are thought to be under a strict selection pressure that removes cells with low affinity for the antigen and also cells that have acquired self-reactivity. We investigated the effect of apoptotic deficiencies on the accumulation of somatic mutations in GC B cells. In mice lacking the death receptor Fas, lpr mice, the frequency of mutations was increased but the pattern of the mutations did not differ from wild type mice. In contrast, mice over-expressing the anti-apoptotic protein Bcl-2, had a lowered frequency of mutations and the mutations introduced had other characteristics.

A forgotten little chapter on isoperimetric inequalities. On the fraction of a convex and closed plane area lying outside a circle with which it shares a diameter

[EN]Often some interesting or simply curious points are left out when developing a theory. It seems that one of them is the existence of an upper bound for the fraction of area of a convex and closed plane area lying outside a circle with which it shares a diameter, a problem stemming from the theory of isoperimetric inequalities. In this paper such a bound is constructed and shown to be attained for a particular area. It is also shown that convexity is a necessary condition in order to avoid the whole area lying outside the circle

Modal hedges in para-pharmaceutical product instructions: some examples from English and Serbian

[EN] The paper investigates how modal hedges (Coates 1983) understood as expressions of procedural meaning , i.e. expressions which instruct the addressee/reader how to process the propositional content of an utterance/statement (Watts 2004) are used in product descriptions, advertisements and consumer instructions leaflets for a number of products belonging to the Consumer Health Care category for the purposes of complying with consumer protection laws on the one hand and serving as an implicit disclaimer of manufacturer’s responsibility on the other. The analysis is carried out contrastively for two languages, English and Serbian. The results obtained are discussed and viewed as a matter of cultural variety and difference, especially taking into consideration the fact that consumer protection laws seem to be equally strict in US, UK and Commonwealth, Europe and Serbia.

Effects of ocean acidification on the brown alga "Padina pavonica": decalcification due to acute and chronic events

[EN] Since the industrial revolution, anthropogenic CO2 emissions have caused ocean acidification, which particularly affects calcified organisms. Given the fan-like calcified fronds of the brown alga Padina pavonica, we evaluated the acute (shortterm) effects of a sudden pH drop due to a submarine volcanic eruption (October 2011–early March 2012) affecting offshore waters around El Hierro Island (Canary Islands, Spain). We further studied the chronic (long-term) effects of the continuous decrease in pH in the last decades around the Canarian waters. In both the observational and retrospective studies (using herbarium collections of P. pavonica thalli from the overall Canarian Archipelago), the percent of surface calcium carbonate coverage of P. pavonica thalli were contrasted with oceanographic data collected either in situ (volcanic eruption event) or from the ESTOC marine observatory data series (herbarium study). Results showed that this calcified alga is sensitive to acute and chronic environmental pH changes. In both cases, pH changes predicted surface thallus calcification, including a progressive decalcification over the last three decades. This result concurs with previous studies where calcareous organisms decalcify under more acidic conditions. Hence, Padina pavonica can be implemented as a bio-indicator of ocean acidification (at short and long time scales) for monitoring purposes over wide geographic ranges, as this macroalga is affected and thrives (unlike strict calcifiers) under more acidic conditions

Sulla ricerca del minimo dei consumi per vetture sportive

La ricerca oggetto di questa tesi, come si evince dal titolo stesso, è volta alla riduzione dei consumi per vetture a forte carattere sportivo ed elevate prestazioni specifiche. In particolare, tutte le attività descritte fanno riferimento ad un ben definito modello di vettura, ovvero la Maserati Quattroporte. Lo scenario all’interno del quale questo lavoro si inquadra, è quello di una forte spinta alla riduzione dei cosiddetti gas serra, ossia dell’anidride carbonica, in linea con quelle che sono le disposizioni dettate dal protocollo di Kyoto. La necessità di ridurre l’immissione in atmosfera di CO2 sta condizionando tutti i settori della società: dal riscaldamento degli edifici privati a quello degli stabilimenti industriali, dalla generazione di energia ai processi produttivi in senso lato. Nell’ambito di questo panorama, chiaramente, sono chiamati ad uno sforzo considerevole i costruttori di automobili, alle quali è imputata una percentuale considerevole dell’anidride carbonica prodotta ogni giorno e riversata nell’atmosfera. Al delicato problema inquinamento ne va aggiunto uno forse ancor più contingente e diretto, legato a ragioni di carattere economico. I combustibili fossili, come tutti sanno, sono una fonte di energia non rinnovabile, la cui disponibilità è legata a giacimenti situati in opportune zone del pianeta e non inesauribili. Per di più, la situazione socio politica che il medio oriente sta affrontando, unita alla crescente domanda da parte di quei paesi in cui il processo di industrializzazione è partito da poco a ritmi vertiginosi, hanno letteralmente fatto lievitare il prezzo del petrolio. A causa di ciò, avere una vettura efficiente in senso lato e, quindi, a ridotti consumi, è a tutti gli effetti un contenuto di prodotto apprezzato dal punto di vista del marketing, anche per i segmenti vettura più alti. Nell’ambito di questa ricerca il problema dei consumi è stato affrontato come una conseguenza del comportamento globale della vettura in termini di efficienza, valutando il miglior compromesso fra le diverse aree funzionali costituenti il veicolo. Una parte consistente del lavoro è stata dedicata alla messa a punto di un modello di calcolo, attraverso il quale eseguire una serie di analisi di sensibilità sull’influenza dei diversi parametri vettura sul consumo complessivo di carburante. Sulla base di tali indicazioni, è stata proposta una modifica dei rapporti del cambio elettro-attuato con lo scopo di ottimizzare il compromesso tra consumi e prestazioni, senza inficiare considerevolmente queste ultime. La soluzione proposta è stata effettivamente realizzata e provata su vettura, dando la possibilità di verificare i risultati ed operare un’approfondita attività di correlazione del modello di calcolo per i consumi. Il beneficio ottenuto in termini di autonomia è stato decisamente significativo con riferimento sia ai cicli di omologazione europei, che a quelli statunitensi. Sono state inoltre analizzate le ripercussioni dal punto di vista delle prestazioni ed anche in questo caso i numerosi dati rilevati hanno permesso di migliorare il livello di correlazione del modello di simulazione per le prestazioni. La vettura con la nuova rapportatura proposta è stata poi confrontata con un prototipo di Maserati Quattroporte avente cambio automatico e convertitore di coppia. Questa ulteriore attività ha permesso di valutare il differente comportamento tra le due soluzioni, sia in termini di consumo istantaneo, che di consumo complessivo rilevato durante le principali missioni su banco a rulli previste dalle normative. L’ultima sezione del lavoro è stata dedicata alla valutazione dell’efficienza energetica del sistema vettura, intesa come resistenza all’avanzamento incontrata durante il moto ad una determinata velocità. Sono state indagate sperimentalmente le curve di “coast down” della Quattroporte e di alcune concorrenti e sono stati proposti degli interventi volti alla riduzione del coefficiente di penetrazione aerodinamica, pur con il vincolo di non alterare lo stile vettura.

L'a(rche)tipico Brian O'Nolan. Comico e riso dalla tradizione al post-

This study aims at analysing Brian O'Nolans literary production in the light of a reconsideration of the role played by his two most famous pseudonyms ,Flann Brien and Myles na Gopaleen, behind which he was active both as a novelist and as a journalist. We tried to establish a new kind of relationship between them and their empirical author following recent cultural and scientific surveys in the field of Humour Studies, Psychology, and Sociology: taking as a starting point the appreciation of the comic attitude in nature and in cultural history, we progressed through a short history of laughter and derision, followed by an overview on humour theories. After having established such a frame, we considered an integration of scientific studies in the field of laughter and humour as a base for our study scheme, in order to come to a definition of the comic author as a recognised, powerful and authoritative social figure who acts as a critic of conventions. The history of laughter and comic we briefly summarized, based on the one related by the French scholar Georges Minois in his work (Minois 2004), has been taken into account in the view that humorous attitude is one of man’s characteristic traits always present and witnessed throughout the ages, though subject in most cases to repression by cultural and political conservative power. This sort of Super-Ego notwithstanding, or perhaps because of that, comic impulse proved irreducible exactly in its influence on the current cultural debates. Basing mainly on Robert R. Provine’s (Provine 2001), Fabio Ceccarelli’s (Ceccarelli 1988), Arthur Koestler’s (Koestler 1975) and Peter L. Berger’s (Berger 1995) scientific essays on the actual occurrence of laughter and smile in complex social situations, we underlined the many evidences for how the use of comic, humour and wit (in a Freudian sense) could be best comprehended if seen as a common mind process designed for the improvement of knowledge, in which we traced a strict relation with the play-element the Dutch historian Huizinga highlighted in his famous essay, Homo Ludens (Huizinga 1955). We considered comic and humour/wit as different sides of the same coin, and showed how the demonstrations scientists provided on this particular subject are not conclusive, given that the mental processes could not still be irrefutably shown to be separated as regards graduations in comic expression and reception: in fact, different outputs in expressions might lead back to one and the same production process, following the general ‘Economy Rule’ of evolution; man is the only animal who lies, meaning with this that one feeling is not necessarily biuniquely associated with one and the same outward display, so human expressions are not validation proofs for feelings. Considering societies, we found that in nature they are all organized in more or less the same way, that is, in élites who govern over a community who, in turn, recognizes them as legitimate delegates for that task; we inferred from this the epistemological possibility for the existence of an added ruling figure alongside those political and religious: this figure being the comic, who is the person in charge of expressing true feelings towards given subjects of contention. Any community owns one, and his very peculiar status is validated by the fact that his place is within the community, living in it and speaking to it, but at the same time is outside it in the sense that his action focuses mainly on shedding light on ideas and objects placed out-side the boundaries of social convention: taboos, fears, sacred objects and finally culture are the favourite targets of the comic person’s arrow. This is the reason for the word a(rche)typical as applied to the comic figure in society: atypical in a sense, because unconventional and disrespectful of traditions, critical and never at ease with unblinkered respect of canons; archetypical, because the “village fool”, buffoon, jester or anyone in any kind of society who plays such roles, is an archetype in the Jungian sense, i.e. a personification of an irreducible side of human nature that everybody instinctively knows: a beginner of a tradition, the perfect type, what is most conventional of all and therefore the exact opposite of an atypical. There is an intrinsic necessity, we think, of such figures in societies, just like politicians and priests, who should play an elitist role in order to guide and rule not for their own benefit but for the good of the community. We are not naïve and do know that actual owners of power always tend to keep it indefinitely: the ‘social comic’ as a role of power has nonetheless the distinctive feature of being the only job whose tension is not towards stability. It has got in itself the rewarding permission of contradiction, for the very reason we exposed before that the comic must cast an eye both inside and outside society and his vision may be perforce not consistent, then it is satisfactory for the popularity that gives amongst readers and audience. Finally, the difference between governors, priests and comic figures is the seriousness of the first two (fundamentally monologic) and the merry contradiction of the third (essentially dialogic). MPs, mayors, bishops and pastors should always console, comfort and soothe popular mood in respect of the public convention; the comic has the opposite task of provoking, urging and irritating, accomplishing at the same time a sort of control of the soothing powers of society, keepers of the righteousness. In this view, the comic person assumes a paramount importance in the counterbalancing of power administration, whether in form of acting in public places or in written pieces which could circulate for private reading. At this point comes into question our Irish writer Brian O'Nolan(1911-1966), real name that stood behind the more famous masks of Flann O'Brien, novelist, author of At Swim-Two-Birds (1939), The Hard Life (1961), The Dalkey Archive (1964) and, posthumously, The Third Policeman (1967); and of Myles na Gopaleen, journalist, keeper for more than 25 years of the Cruiskeen Lawn column on The Irish Times (1940-1966), and author of the famous book-parody in Irish An Béal Bocht (1941), later translated in English as The Poor Mouth (1973). Brian O'Nolan, professional senior civil servant of the Republic, has never seen recognized his authorship in literary studies, since all of them concentrated on his alter egos Flann, Myles and some others he used for minor contributions. So far as we are concerned, we think this is the first study which places the real name in the title, this way acknowledging him an unity of intents that no-one before did. And this choice in titling is not a mere mark of distinction for the sake of it, but also a wilful sign of how his opus should now be reconsidered. In effect, the aim of this study is exactly that of demonstrating how the empirical author Brian O'Nolan was the real Deus in machina, the master of puppets who skilfully directed all of his identities in planned directions, so as to completely fulfil the role of the comic figure we explained before. Flann O'Brien and Myles na Gopaleen were personae and not persons, but the impression one gets from the critical studies on them is the exact opposite. Literary consideration, that came only after O'Nolans death, began with Anne Clissmann’s work, Flann O'Brien: A Critical Introduction to His Writings (Clissmann 1975), while the most recent book is Keith Donohue’s The Irish Anatomist: A Study of Flann O'Brien (Donohue 2002); passing through M.Keith Booker’s Flann O'Brien, Bakhtin and Menippean Satire (Booker 1995), Keith Hopper’s Flann O'Brien: A Portrait of the Artist as a Young Post-Modernist (Hopper 1995) and Monique Gallagher’s Flann O'Brien, Myles et les autres (Gallagher 1998). There have also been a couple of biographies, which incidentally somehow try to explain critical points his literary production, while many critical studies do the same on the opposite side, trying to found critical points of view on the author’s restless life and habits. At this stage, we attempted to merge into O'Nolan's corpus the journalistic articles he wrote, more than 4,200, for roughly two million words in the 26-year-old running of the column. To justify this, we appealed to several considerations about the figure O'Nolan used as writer: Myles na Gopaleen (later simplified in na Gopaleen), who was the equivalent of the street artist or storyteller, speaking to his imaginary public and trying to involve it in his stories, quarrels and debates of all kinds. First of all, he relied much on language for the reactions he would obtain, playing on, and with, words so as to ironically unmask untrue relationships between words and things. Secondly, he pushed to the limit the convention of addressing to spectators and listeners usually employed in live performing, stretching its role in the written discourse to come to a greater effect of involvement of readers. Lastly, he profited much from what we labelled his “specific weight”, i.e. the potential influence in society given by his recognised authority in determined matters, a position from which he could launch deeper attacks on conventional beliefs, so complying with the duty of a comic we hypothesised before: that of criticising society even in threat of losing the benefits the post guarantees. That seemingly masochistic tendency has its rationale. Every representative has many privileges on the assumption that he, or she, has great responsibilities in administrating. The higher those responsibilities are, the higher is the reward but also the severer is the punishment for the misfits done while in charge. But we all know that not everybody accepts the rules and many try to use their power for their personal benefit and do not want to undergo law’s penalties. The comic, showing in this case more civic sense than others, helped very much in this by the non-accessibility to the use of public force, finds in the role of the scapegoat the right accomplishment of his task, accepting the punishment when his breaking of the conventions is too stark to be forgiven. As Ceccarelli demonstrated, the role of the object of laughter (comic, ridicule) has its very own positive side: there is freedom of expression for the person, and at the same time integration in the society, even though at low levels. Then the banishment of a ‘social’ comic can never get to total extirpation from society, revealing how the scope of the comic lies on an entirely fictional layer, bearing no relation with facts, nor real consequences in terms of physical health. Myles na Gopaleen, mastering these three characteristics we postulated in the highest way, can be considered an author worth noting; and the oeuvre he wrote, the whole collection of Cruiskeen Lawn articles, is rightfully a novel because respects the canons of it especially regarding the authorial figure and his relationship with the readers. In addition, his work can be studied even if we cannot conduct our research on the whole of it, this proceeding being justified exactly because of the resemblances to the real figure of the storyteller: its ‘chapters’ —the daily articles— had a format that even the distracted reader could follow, even one who did not read each and every article before. So we can critically consider also a good part of them, as collected in the seven volumes published so far, with the addition of some others outside the collections, because completeness in this case is not at all a guarantee of a better precision in the assessment; on the contrary: examination of the totality of articles might let us consider him as a person and not a persona. Once cleared these points, we proceeded further in considering tout court the works of Brian O'Nolan as the works of a unique author, rather than complicating the references with many names which are none other than well-wrought sides of the same personality. By putting O'Nolan as the correct object of our research, empirical author of the works of the personae Flann O'Brien and Myles na Gopaleen, there comes out a clearer literary landscape: the comic author Brian O'Nolan, self-conscious of his paramount role in society as both a guide and a scourge, in a word as an a(rche)typical, intentionally chose to differentiate his personalities so as to create different perspectives in different fields of knowledge by using, in addition, different means of communication: novels and journalism. We finally compared the newly assessed author Brian O'Nolan with other great Irish comic writers in English, such as James Joyce (the one everybody named as the master in the field), Samuel Beckett, and Jonathan Swift. This comparison showed once more how O'Nolan is in no way inferior to these authors who, greatly celebrated by critics, have nonetheless failed to achieve that great public recognition O’Nolan received alias Myles, awarded by the daily audience he reached and influenced with his Cruiskeen Lawn column. For this reason, we believe him to be representative of the comic figure’s function as a social regulator and as a builder of solidarity, such as that Raymond Williams spoke of in his work (Williams 1982), with in mind the aim of building a ‘culture in common’. There is no way for a ‘culture in common’ to be acquired if we do not accept the fact that even the most functional society rests on conventions, and in a world more and more ‘connected’ we need someone to help everybody negotiate with different cultures and persons. The comic gives us a worldly perspective which is at the same time comfortable and distressing but in the end not harmful as the one furnished by politicians could be: he lets us peep into parallel worlds without moving too far from our armchair and, as a consequence, is the one who does his best for the improvement of our understanding of things.

Numerical and analytical vibro-acoustic modelling of porous materials: the Cell Method for poroelasticity and the case of inclusions

Porous materials are widely used in many fields of industrial applications, to achieve the requirements of noise reduction, that nowadays derive from strict regulations. The modeling of porous materials is still a problematic issue. Numerical simulations are often problematic in case of real complex geometries, especially in terms of computational times and convergence. At the same time, analytical models, even if partly limited by restrictive simplificative hypotheses, represent a powerful instrument to capture quickly the physics of the problem and general trends. In this context, a recently developed numerical method, called the Cell Method, is described, is presented in the case of the Biot's theory and applied for representative cases. The peculiarity of the Cell Method is that it allows for a direct algebraic and geometrical discretization of the field equations, without any reduction to a weak integral form. Then, the second part of the thesis presents the case of interaction between two poroelastic materials under the context of double porosity. The idea of using periodically repeated inclusions of a second porous material into a layer composed by an original material is described. In particular, the problem is addressed considering the efficiency of the analytical method. A analytical procedure for the simulation of heterogeneous layers based is described and validated considering both conditions of absorption and transmission; a comparison with the available numerical methods is performed. ---------------- I materiali porosi sono ampiamente utilizzati per diverse applicazioni industriali, al fine di raggiungere gli obiettivi di riduzione del rumore, che sono resi impegnativi da norme al giorno d'oggi sempre più stringenti. La modellazione dei materiali porori per applicazioni vibro-acustiche rapprensenta un aspetto di una certa complessità. Le simulazioni numeriche sono spesso problematiche quando siano coinvolte geometrie di pezzi reali, in particolare riguardo i tempi computazionali e la convergenza. Allo stesso tempo, i modelli analitici, anche se parzialmente limitati a causa di ipotesi semplificative che ne restringono l'ambito di utilizzo, rappresentano uno strumento molto utile per comprendere rapidamente la fisica del problema e individuare tendenze generali. In questo contesto, un metodo numerico recentemente sviluppato, il Metodo delle Celle, viene descritto, implementato nel caso della teoria di Biot per la poroelasticità e applicato a casi rappresentativi. La peculiarità del Metodo delle Celle consiste nella discretizzazione diretta algebrica e geometrica delle equazioni di campo, senza alcuna riduzione a forme integrali deboli. Successivamente, nella seconda parte della tesi viene presentato il caso delle interazioni tra due materiali poroelastici a contatto, nel contesto dei materiali a doppia porosità. Viene descritta l'idea di utilizzare inclusioni periodicamente ripetute di un secondo materiale poroso all'interno di un layer a sua volta poroso. In particolare, il problema è studiando il metodo analitico e la sua efficienza. Una procedura analitica per il calcolo di strati eterogenei di materiale viene descritta e validata considerando sia condizioni di assorbimento, sia di trasmissione; viene effettuata una comparazione con i metodi numerici a disposizione.

Development of motion analysis protocols based on inertial sensors

The aim of this thesis was to describe the development of motion analysis protocols for applications on upper and lower limb extremities, by using inertial sensors-based systems. Inertial sensors-based systems are relatively recent. Knowledge and development of methods and algorithms for the use of such systems for clinical purposes is therefore limited if compared with stereophotogrammetry. However, their advantages in terms of low cost, portability, small size, are a valid reason to follow this direction. When developing motion analysis protocols based on inertial sensors, attention must be given to several aspects, like the accuracy of inertial sensors-based systems and their reliability. The need to develop specific algorithms/methods and software for using these systems for specific applications, is as much important as the development of motion analysis protocols based on them. For this reason, the goal of the 3-years research project described in this thesis was achieved first of all trying to correctly design the protocols based on inertial sensors, in terms of exploring and developing which features were suitable for the specific application of the protocols. The use of optoelectronic systems was necessary because they provided a gold standard and accurate measurement, which was used as a reference for the validation of the protocols based on inertial sensors. The protocols described in this thesis can be particularly helpful for rehabilitation centers in which the high cost of instrumentation or the limited working areas do not allow the use of stereophotogrammetry. Moreover, many applications requiring upper and lower limb motion analysis to be performed outside the laboratories will benefit from these protocols, for example performing gait analysis along the corridors. Out of the buildings, the condition of steady-state walking or the behavior of the prosthetic devices when encountering slopes or obstacles during walking can also be assessed. The application of inertial sensors on lower limb amputees presents conditions which are challenging for magnetometer-based systems, due to ferromagnetic material commonly adopted for the construction of idraulic components or motors. INAIL Prostheses Centre stimulated and, together with Xsens Technologies B.V. supported the development of additional methods for improving the accuracy of MTx in measuring the 3D kinematics for lower limb prostheses, with the results provided in this thesis. In the author’s opinion, this thesis and the motion analysis protocols based on inertial sensors here described, are a demonstration of how a strict collaboration between the industry, the clinical centers, the research laboratories, can improve the knowledge, exchange know-how, with the common goal to develop new application-oriented systems.

Fluid dynamic analysis and modelling of industrial chemical equipment

The research is aimed at contributing to the identification of reliable fully predictive Computational Fluid Dynamics (CFD) methods for the numerical simulation of equipment typically adopted in the chemical and process industries. The apparatuses selected for the investigation, specifically membrane modules, stirred vessels and fluidized beds, were characterized by a different and often complex fluid dynamic behaviour and in some cases the momentum transfer phenomena were coupled with mass transfer or multiphase interactions. Firs of all, a novel modelling approach based on CFD for the prediction of the gas separation process in membrane modules for hydrogen purification is developed. The reliability of the gas velocity field calculated numerically is assessed by comparison of the predictions with experimental velocity data collected by Particle Image Velocimetry, while the applicability of the model to properly predict the separation process under a wide range of operating conditions is assessed through a strict comparison with permeation experimental data. Then, the effect of numerical issues on the RANS-based predictions of single phase stirred tanks is analysed. The homogenisation process of a scalar tracer is also investigated and simulation results are compared to original passive tracer homogenisation curves determined with Planar Laser Induced Fluorescence. The capability of a CFD approach based on the solution of RANS equations is also investigated for describing the fluid dynamic characteristics of the dispersion of organics in water. Finally, an Eulerian-Eulerian fluid-dynamic model is used to simulate mono-disperse suspensions of Geldart A Group particles fluidized by a Newtonian incompressible fluid as well as binary segregating fluidized beds of particles differing in size and density. The results obtained under a number of different operating conditions are compared with literature experimental data and the effect of numerical uncertainties on axial segregation is also discussed.

Development of human visual system analysis for the implementation of a new instrument for flicker measurement

Flicker is a power quality phenomenon that applies to cycle instability of light intensity resulting from supply voltage fluctuation, which, in turn can be caused by disturbances introduced during power generation, transmission or distribution. The standard EN 61000-4-15 which has been recently adopted also by the IEEE as IEEE Standard 1453 relies on the analysis of the supply voltage which is processed according to a suitable model of the lamp – human eye – brain chain. As for the lamp, an incandescent 60 W, 230 V, 50 Hz source is assumed. As far as the human eye – brain model is concerned, it is represented by the so-called flicker curve. Such a curve was determined several years ago by statistically analyzing the results of tests where people were subjected to flicker with different combinations of magnitude and frequency. The limitations of this standard approach to flicker evaluation are essentially two. First, the provided index of annoyance Pst can be related to an actual tiredness of the human visual system only if such an incandescent lamp is used. Moreover, the implemented response to flicker is “subjective” given that it relies on the people answers about their feelings. In the last 15 years, many scientific contributions have tackled these issues by investigating the possibility to develop a novel model of the eye-brain response to flicker and overcome the strict dependence of the standard on the kind of the light source. In this light of fact, this thesis is aimed at presenting an important contribution for a new Flickermeter. An improved visual system model using a physiological parameter that is the mean value of the pupil diameter, has been presented, thus allowing to get a more “objective” representation of the response to flicker. The system used to both generate flicker and measure the pupil diameter has been illustrated along with all the results of several experiments performed on the volunteers. The intent has been to demonstrate that the measurement of that geometrical parameter can give reliable information about the feeling of the human visual system to light flicker.