Study for the rehabilitation of vernacular architecture with sustainable criteria

This paper assesses rural vernacular heritage established in a warm temperate climate, with dry, hot summer, in São Vicente e Ventosa (SVV), Alentejo, Portugal, and takes part in a larger investigation intending to create rehabilitation guidelines, with sustainable criteria and integration of recent technologies, to improving indoor comfort, and revert the state of deterioration. To further reach this aim, this paper proposes a four phases methodology: data collection, evaluation, simulation and development; a first survey data analysis, including climate data and the adapted comfort climograph and isopleth diagram, allows an understanding of thermal comfort and main constraints in site, as well as suitable bioclimatic strategies for SVV: high thermal inertia for tempering extreme summer conditions and the considerable temperature amplitudes throughout the year, complementarily night ventilation for passive cooling, small-sized window openings and movable shading systems for solar radiation protection. An efficient behaviour in stabilizing indoor temperature swings is revealed.

Estudios corológicos de plantas vasculares en la cuenca media del Tajo

Se ha realizado un estudio de la distribución de plantas vasculares en un territorio situado entre las provincias de Cuenca, Guadalajara, Madrid y Toledo (España). El territorio estudiado está en la Submeseta Sur de la península ibérica, al sur del Sistema Central, norte de los Montes de Toledo y oeste del Sistema Ibérico, en zonas sedimentarias con poco relieve y clima mediterráneo, con grandes contrastes de temperatura y precipitaciones muy irregulares. Coincide con las regiones naturales llamadas: “Alcarrias”, “Campiñas de Madrid y Guadalajara” y “Vegas de los ríos de la Cuenca del Tajo”. Es lo que he llamado Cuenca Media del Tajo. En una primera fase se ha estudiado la flora regional para adquirir conocimientos previos mediante las consultas bibliográficas y de herbarios, se ha contado con bases de datos disponibles para MA, MACB, MAF, JACA, AH, ABH, VAL, SALA y EMMA. Se han revisado las aportaciones propias que en los últimos años he realizado en el territorio en relación a los temas tratados en la tesis. El trabajo de campo ha consistido en la realización de inventarios de presencia de flora. Ha sido muy importante la tarea herborizadora para llegar a la correcta identificación de las especies colectadas en los inventarios. De esta forma el autor ha confeccionado un herbario propio JML que en el territorio muestreado ha reunido cerca de 15000 números en las cuatro provincias estudiadas. Se ha hecho un muestreo sistemático del territorio con unos 6000 listados de plantas. Se ha tomado como unidad de muestreo la cuadrícula de UTM de 1 km de lado incluida como una centésima parte de la cuadrícula de UTM de 10 km. Se han seguido criterios para uniformizar el muestreo. Se ha apuntado el tiempo empleado y la superficie muestreada estimada en cada toma de datos. El criterio mínimo que tienen que cumplir todas las cuadrículas en el área estudiada ha sido que para cada cuadrícula de UTM de 5 km se han realizado al menos 5 inventarios en 5 cuadrículas diferentes de UTM de 1 km y al menos en una hora de tiempo. La unidad de comparación ha sido la cuadrícula UTM de 5 km. Se han informatizado los inventarios de campo, para ello se ha creado la base de datos TESIS en Microsoft office –Access-. Las principales tablas son LOCALIDAD, en la que se anotan las características del lugar muestreado y ESPECIES, que lista las especies de flora consideradas en las cuatro provincias del estudio. Por medio de formularios se han rellenado las tablas; destaca la tabla ESPECIE INVENTARIO que relaciona las tablas ESPECIES y LOCALIDAD; esta tabla cuenta en este momento con unos 165.000 registros. En la tabla ESPECIES_FPVI se visualizan las especies recopiladas. Se ha creado un indicador llamado FPVI “Flora permanentemente visible identificable” que consiste en atribuir a cada especie unos índices que nos permiten saber si una determinada planta se puede detectar en cualquier época del año. Los resultados presentados son: Creación de la base de datos TESIS. El Catálogo Florístico de la Cuenca Media del Tajo, que es el catálogo de la flora de las cuatro provincias desde el principio de la sistemática hasta las Saxifragáceas. En total se han recopilado 1028 taxones distribuidos en 77 familias. Se ha calculado el índice FPVI, para las especies del catálogo. La finalidad para la que se ha diseñado este índice es para poder comparar territorios. Para el desarrollo de ambos resultados ha sido fundamental el desarrollo de la tabla ESPECIES_PVI de la base de datos TESIS. En la tabla ESPECIES_PVI se han apuntado las características ecológicas y se revisa la información bibliográfica disponible para cada especie; las principales fuentes de información consultadas han sido Flora iberica, el proyecto “Anthos” y las bases de datos de los herbarios. Se ha apuntado sí se ha visto, sí está protegida o sí en un endemismo. Otros resultados son: la localización de las cuadrículas de UTM de 10 km, con mayor número de endemismos o especies singulares, con mayor valor botánico. Se ha realizado un par de ejemplos de estudios de autoecología de especie, en concreto Teucrium pumilum y Clematis recta. Se han confeccionando salidas cartográficas de distribución de especies. Se ha elaborado el herbario JML. Se ha presentado una sencilla herramienta para incluir inventarios florísticos, citas corológicas, consultas de autoecología o etiquetado de pliegos de herbario. Como colofón, se ha colaborado para desarrollar una aplicación informática de visualización, análisis y estudio de la distribución de taxones vegetales, que ha utilizado como datos de partida un porcentaje importante de los obtenidos para esta tesis. ABSTRACT I have made a study of the distribution of vascular plants in a territory located between the provinces of Cuenca, Guadalajara, Madrid and Toledo (Spain). The studied area is in the “Submeseta” South of the Iberian Peninsula, south of the Central System, north of the Montes de Toledo and west of the Iberian System, in sedimentary areas with little relief and Mediterranean climate, with big temperature contrasts and irregular rainfall. Coincides with the natural regions called "Alcarrias", "countryside of Madrid and Guadalajara" and “Vegas River Tagus Basin”. This is what I have called Middle Tagus Basin. In a first step we have studied the regional flora to acquire prior knowledge through the literature and herbaria consultations, it has had available databases for MA, MACB, MAF, JACA, AH, ABH, VAL, SALA and EMMA herbaria. The contributions I have made in the last years in the territory in relation to the topics discussed in the thesis have been revised. The field work consisted of conducting inventories presence of flora. Botanize was a very important task to get to the correct identification of the species collected in inventories. In this way the author has made his own herbarium JML in the sampled area has met at least 15000 samples in the four studied provinces. There has been a systematic sampling of the territory with nearly 6,000 listings of plants. Was taken as the sampling unit grid UTM 1 km side included as a hundredth of the UTM grid of 10 km from side. Criteria have been taken to standardize the sampling. Data were taken of the time spent and the estimated sampled surface. The minimum criteria they have to meet all the grids in the study area has been that for each UTM grid of 5 km have been made at least 5 stocks in 5 different grids UTM 1 km and at least one hour of time. The unit of comparison was the UTM grid of 5 km. I have computerized inventories of field, for it was created a database in Access- Microsoft office -TESIS. The main tables are LOCALIDAD, with caracteristics of the sampled location and ESPECIES, which lists the plant species considered in the four provinces of the study, is. Through forms I filled in the tables; highlights ESPECIE INVENTARIO table that relates the tables ESPECIES and LOCALIDAD, this table is counted at the moment with about 165,000 records. The table ESPECIES FPVI visualizes all recollected species. We have created an indicator called FPVI "Flora permanently visible identifiable" that attributes to each species indices that allow us to know whether a given plant can be detected in any season. The results presented are: Creating data base TESIS. The Floristic Books Middle Tagus Basin, which is a catalog of the flora of the four provinces since the beginning of the systematic until Saxifragaceae. In total 1028 collected taxa in 77 families. We calculated FPVI index for species catalog. The purpose for which this index designed is, to compare territories. For the development of both results, it was essential to develop the table ESPECIES_PVI TESIS data base. Table ESPECIES_PVI has signed the ecological characteristics and bibliographic information available for each species is revised; the main sources of information has been Flora iberica, the Anthos project databases of herbaria. Targeted species has been recorded, when seen, protected or endemism. Have also been located UTM grids of 10 km, with the largest number of endemic or unique species and more botanical value. There have been a couple of species autecology studies, namely Teucrium pumilum and Clematis recta, as an example of this type of study. They have been putting together maps of species distribution. We made herbarium JML. I have presented a simple tool to include floristic inventories, chorological appointments, consultations or to tag autoecology herbarium specimens. To cap it has worked to develop a computer application for visualization, analysis and study of the distribution of plant taxa, which has used as input data a significant percentage of those obtained for this thesis.

Naturaleza, ética, y arquitectura: Autenticidad y criterios éticos que integran el desarrollo de una arquitectura más sostenible = Nature, ethics and architecture: Authenticity and ethics criteria that integrate the development of a more sustainable architecture

La ecología no solamente ha puesto de manifiesto problemas ambientales, sino que ha confirmado la necesidad de una nueva armonía entre los propios seres humanos y de éstos con la naturaleza y con todos los seres que la habitan. Es necesario un nuevo contrato que determine nuestras relaciones con la Naturaleza (Serrs1), y una nueva Ética para nuestras vidas (Guattari2). La ética medioambiental nos ha dado una visión universal y supra-generacional de la gestión de la naturaleza y como consecuencia, una nueva forma de construir nuestra ‘segunda’ Naturaleza, que es la arquitectura. ¿Qué es lo esencial que esta nueva ética exige para la arquitectura? Este es un momento crucial para reconsiderar los objetivos de la arquitectura, porque lo ‘eco’ está produciendo grandes cambios. ¿Implica esta era post-ecológica una particular ética, es decir, referida a sus fines y medios? ¿Porqué, para qué, para quién, cómo debemos hacer la arquitectura de nuestro tiempo? Es momento de afrontar críticamente el discurso de la eco-arquitectura, e incluso de repensar los propios límites de la arquitectura. El desarrollo actual del conocimiento medioambiental es esencialmente técnico y utilitario, pero ¿es el reto solamente técnico?¿Es suficiente la suma de lo medioambiental-social-económico-cultural para definirla? ¿Hay claves que nos puedan dar la dimensión ética de esta aproximación técnica-empírica? ¿Sabemos lo que estamos haciendo cuando aplicamos este conocimiento? Y, sobre todo, ¿cuál es el sentido de lo que estamos haciendo? La tesis que se propone puede resumirse: De acuerdo con el actual conocimiento que tenemos de la Naturaleza, la Arquitectura de nuestro tiempo deber reconsiderar sus fines y medios, puesto que la ética medioambiental está definiendo nuevos objetivos. Para fundamentar y profundizar en esta afirmación la tesis analiza cómo son hoy día las relaciones entre Ética-Naturaleza-Arquitectura (Fig.1), lo que facilitará las claves de cuáles son los criterios éticos (en cuanto a fines y medios) que deben definir la arquitectura del tiempo de la ecología. ABSTRACT Ecology shows us not only environmental problems; it shows that we need a new balance and harmony between individuals, beings, communities and Nature. We need a new contract with Nature according to Serres576, and a new Ethics for our lives according to Guattari577. Environmental ethics have given us a universal and supra-generational vision of the management of our Nature and, as a consequence, a new way to construct our ‘second’ nature, which is architecture. What is essential for this new architecture that the new ethics demand? This is a critical moment to reconsider the object of architecture, because the ‘eco’ is making significant changes in it. Are there any specifically ethical concerns (ends and means) in the post-ecological era? Why, for what, for whom, how should we make architecture in our times? This is the time to approach the eco-architectural discourse critically and to question the current boundaries of architecture itself: Where is eco-architecture going? The current development of environmental knowledge is essentially technical and utilitarian, but it is its technical aspect the only challenge? Is the sum of environmental-social-economic aspects enough to define it? Are there any clues which can give an ethical sense to this technical-empirical approach? Do we know what we are doing when we apply this knowledge? And overall, what is the meaning of what we are doing? Exploring this subject, this thesis makes a statement: In accordance with the actual knowledge of Nature, Architecture of our time must reconsider its ends and means, since the environmental ethics is defining new objectives. To support that, the thesis analyzes what the relationships between Ethics –Nature- Architecture (Fig. 53) are like nowadays, this will provide the clues of which ethical criteria (ends and means) must architecture of an ecological era define.

La pedagogía del criterio desobediente/Pedagogy of Disobedient Criteria

Artículo de crítica de la arquitectura y la aplicación de ésta a la docencia de proyectos arquitectónicos.

Analytical bearing capacity of strip footing in weightless materials with power-law failure criteria

Sokolovskii’s method of characteristics is extended to provide analytical solutions for the ultimate load at the moment of plastic failure under plane-strain conditions of shallow strip foundations on weightless rigid-plastic media with a noncohesive power-law failure envelope. The formulation is made parametrically in terms of the instantaneous friction angle, and the key idea to obtain the bearing capacity is that information can be transmitted from the free surface (where external loads are known) to the contact plane of the foundation. The methodology can consider foundations adjacent to a slope, external surcharges at the free surface, and inclined loads (both on the slope and on the foundation). Sensitivity analyses illustrate the influence on bearing capacity of changes in the different geometrical parameters involved. An application example is presented and design plots are provided, and model predictions are compared with results of bearing capacity tests under low gravity.

Discrete Multi-Criteria Methods for lands use and conservation planning on La Colacha in Arroyos Menores (Río Cuarto, Province of Córdoba, Argentina)

The study area is La Colacha sub-basins from Arroyos Menores basins, natural areas at West and South of Río Cuarto in Province of Córdoba of Argentina, fertile with loess soils and monsoon temperate climate, but with soil erosions including regressive gullies that degrade them progressively. Cultivated gently since some hundred sixty years, coordinated action planning became necessary to conserve lands while keeping good agro-production. The authors had improved data on soils and on hydrology for the study area, evaluated systems of soil uses and actions to be recommended and applied Decision Support Systems (DSS) tools for that, and were conducted to use discrete multi-criteria models (MCDM) for the more global views about soil conservation and hydraulic management actions and about main types of use of soils. For that they used weighted PROMETHEE, ELECTRE, and AHP methods with a system of criteria grouped as environmental, economic and social, and criteria from their data on effects of criteria. The alternatives resulting offer indication for planning depending somehow on sub basins and on selections of weights, but actions for conservation of soils and water management measures are recommended to conserve the basins conditions, actually sensibly degrading, mainly keeping actual uses of the lands.

Is building renovation truly sustainable? The need for applying a multi-criteria assessment through life cycle approach

The aim of the present research is to characterise the international scene in the field of building refurbishment, by thoroughly reviewing the literature relating to building renovation and systematising the results according to the different aspects considered by the authors. Even though there is certain consensus with respect to the criteria for the selection of energy efficiency measures, the assessment criteria differ broadly and widely. The present work highlights the lack of consensus on the assessment criteria and the need of harmonization. A holistic view is required in order to identify the most sustainable strategies in each particular case, considering social, environmental and economic impacts from a life cycle perspective.

How should the sustainability of the location of dry ports be measured? A proposed methodology using Bayesian networks and multi-criteria decision analysis

The global economic structure, with its decentralized production and the consequent increase in freight traffic all over the world, creates considerable problems and challenges for the freight transport sector. This situation has led shipping to become the most suitable and cheapest way to transport goods. Thus, ports are configured as nodes with critical importance in the logistics supply chain as a link between two transport systems, sea and land. Increase in activity at seaports is producing three undesirable effects: increasing road congestion, lack of open space in port installations and a significant environmental impact on seaports. These adverse effects can be mitigated by moving part of the activity inland. Implementation of dry ports is a possible solution and would also provide an opportunity to strengthen intermodal solutions as part of an integrated and more sustainable transport chain, acting as a link between road and railway networks. In this sense, implementation of dry ports allows the separation of the links of the transport chain, thus facilitating the shortest possible routes for the lowest capacity and most polluting means of transport. Thus, the decision of where to locate a dry port demands a thorough analysis of the whole logistics supply chain, with the objective of transferring the largest volume of goods possible from road to more energy efficient means of transport, like rail or short-sea shipping, that are less harmful to the environment. However, the decision of where to locate a dry port must also ensure the sustainability of the site. Thus, the main goal of this article is to research the variables influencing the sustainability of dry port location and how this sustainability can be evaluated. With this objective, in this paper we present a methodology for assessing the sustainability of locations by the use of Multi-Criteria Decision Analysis (MCDA) and Bayesian Networks (BNs). MCDA is used as a way to establish a scoring, whilst BNs were chosen to eliminate arbitrariness in setting the weightings using a technique that allows us to prioritize each variable according to the relationships established in the set of variables. In order to determine the relationships between all the variables involved in the decision, giving us the importance of each factor and variable, we built a K2 BN algorithm. To obtain the scores of each variable, we used a complete cartography analysed by ArcGIS. Recognising that setting the most appropriate location to place a dry port is a geographical multidisciplinary problem, with significant economic, social and environmental implications, we consider 41 variables (grouped into 17 factors) which respond to this need. As a case of study, the sustainability of all of the 10 existing dry ports in Spain has been evaluated. In this set of logistics platforms, we found that the most important variables for achieving sustainability are those related to environmental protection, so the sustainability of the locations requires a great respect for the natural environment and the urban environment in which they are framed.

Criteria to determine seismic risk on sites. Application to Spanish dams

In this paper, the main steps necessary to evaluate the seismic risk on a site are discussed. Several examples from the authors practical experience are reported and a systematic procedure to study the seismic risk on a dam site is also shown. The characteristics of the available Spanish seismic information - mainly historical and non instrumental seismic records - are commented. Different types of seismic and geologic techniques to investigate the area under the dam are given. Finally, a probabilistic method to obtain from the given seismic intensities the design earthquake is summarized

Sustainability assessment of energy saving measures: A multi-criteria approach for residential buildings retrofitting—A case study of the Spanish housing stock

The building sector is well known to be one of the key energy consumers worldwide. The renovation of existing buildings provides excellent opportunities for an effective reduction of energy consumption and greenhouse gas emissions but it is essential to identify the optimal strategies. In this paper a multi-criteria methodology is proposed for the comparative analysis of retrofitting solutions. Life Cycle Assessment (LCA) and Life Cycle Cost (LCC) are combined by expressing environmental impacts in monetary values. A Pareto optimization is used to select the preferred strategies. The methodology is exemplified by a case study: the renovation of a representative housing block from the 1960s located in Madrid. Eight scenarios have been proposed, from the Business as Usual scenario (BAU), through Spanish Building Regulation requirements (for new buildings) up to the Passive House standard. Results show how current renovation strategies that are being applied in Madrid are far from being optimal solutions. The required additional investment, which is needed to obtain an overall performance improvement of the envelope compared with the common practice to date, is relatively low (8%) considering the obtained life cycle environmental and financial savings (43% and 45%, respectively).

The challenge of sustainable building renovation: assessment of current criteria and future outlook

Artículo publicado en un número especial dedicado a la sostenibilidad. Se realiza un análisis crítico de las evaluación de la sostenibilidad en la rehabilitación y se plantea la perspectiva futura en este ámbito.

Pedestrian wind comfort: feasibility study of criteria homogenisation

One of the aims of COST C14 action is the assessment and evaluation of pedestrian wind comfort. At present there is no general rule available that is applied across Europe. There are several criteria that have been developed and applied in different countries. These criteria are based on the definition of two independent parameters, a threshold effective wind speed and a probability of exceedence of this threshold speed. The difficulty of the criteria comparison arises from the two-dimensional character of the criteria definition. An effort is being made to compare these criteria, trying both to find commonalities and to clearly identify differences, in order to build up the basis for the next step: to try to define common criteria (perhaps with regional and seasonal variations). The first point is to define clearly the threshold effective wind speed (mean velocity definition parameters: averaging interval and reference height) and equivalence between different ways of defining the threshold effective wind speed (mean wind speed, gust equivalent mean, etc.) in comparable terms (as far as possible). It can be shown that if the wind speed at a given location is defined in terms of a probability distribution, e.g. Weibull function, a given criterion is satisfied by an infinite set of wind conditions, that is, of probability distributions. The criterion parameters and the Weibull function parameters are linked to each other, establishing a set called iso-criteria lines (the locus of the Weibull function parameters that fulfil a given criterion). The relative position of iso-criteria lines when displayed in a suitable two-dimensional plane facilitates the comparison of comfort criteria. The comparison of several wind comfort criteria, coming from several institutes is performed, showing the feasibility and limitations of the method.

KDIGO-based acute kidney injury criteria operate differently in hospitals and the community—findings from a large population cohort

ACKNOWLEDGEMENTS We acknowledge the data management support of Grampian Data Safe Haven (DaSH) and the associated financial support of NHS Research Scotland, through NHS Grampian investment in the Grampian DaSH. S.S. is supported by a Clinical Research Training Fellowship from the Wellcome Trust (Ref 102729/Z/13/Z). We also acknowledge the support from The Farr Institute of Health Informatics Research. The Farr Institute is supported by a 10-funder consortium: Arthritis Research UK, the British Heart Foundation, Cancer Research UK, the Economic and Social Research Council, the Engineering and Physical Sciences Research Council, the Medical Research Council, the National Institute of Health Research, the National Institute for Social Care and Health Research (Welsh Assembly Government), the Chief Scientist Office (Scottish Government Health Directorates) and the Wellcome Trust (MRC Grant Nos: Scotland MR/K007017/1).