The soundscape as time capsule: A creative project based on the sounds of the first train station of Cuenca

This article reflects on the changing environment through the passage of time and how certain technologies for a creative proposal allow the preservation and transmission of a significant part of that ephemeral heritage for future generations. The general purpose of this particular project is aimed to achieve the sound synthesis of a specific and representative cityscape as the old train station in Cuenca –located in the heart of the city– that could be preserved and reproduced as an unique document of a present time, ascertainable in the future: a memory that interpret sound as a time capsule. This soundscape was made to mark the arrival of the high speed train in 2010 to a brand new station in the outskirts of the city. Therefore, the goal of this research was focused on achieving a synthetic document that provided a sound memory capable of reflecting the significant social, cultural and logistical features, of what was until then the only railway communication symbol in the city of Cuenca from 1883 to the first decade of the 21st century.

Experiencia colaborativa de enseñanza y aprendizaje entre estudiantes de diferentes ámbitos universitarios. Narrativa en torno a los Desayunos Donostia-Barcelona

El texto presenta una experiencia socioconstruccionista que une el trabajo entre estudiantes de Bellas Artes de la Universidad de Barcelona y de Magisterio de la Universidad del País Vasco. Un trabajo colaborativo entre docentes y estudiantes que conllevó compartir conocimientos y saberes a través del uso de nuevas tecnologías de la información y la comunicación (Skype y Blogs). El foco del artículo está situado en las relaciones de enseñanza y aprendizaje propias y singulares de una experiencia concreta, y en lo que se deriva de ello en el desarrollo de identidades de discentes y docentes; en esta línea, surgieron temas vinculados con: las posicionamientos emergentes, los modos de colocarse en los espacios de aprendizaje, las formas de relacionarse con los conocimientos, resistencias y potenciales del uso de nuevas tecnologías, etc. El texto está articulado en dos partes: una primera en la que brevemente se muestra el anclaje teórico que sustentó el trabajo (la investigación narrativa, y el trabajo educativo basado en Leaning by Desing); y una segunda parte que, llevando por título Desayunos Donostia–Barcelona y con una retórica basada en la novela de ficción, presenta experiencias significativas que hablan de los encuentros entre estudiantes y docentes. Dichas experiencias se inscriben dentro de las actividades de los grupos de innovación docente Indaga-t (2010PID-UB/33) y Elkarrikertuz (IT433-10), y es el resultado de trabajos colaborativos entre docentes e investigadores miembros de los mismos.El texto, que parte de la relación entre los grupos de innovación Indaga-t (2010PID-UB/33) y Elkarrikertuz (IT433-10), muestra una experiencia de colaboración que permite a los estudiantes establecer puentes entre diferentes comunidades y entre dos lugares de aprendizaje supuestamente alejados como son las facultades de Bellas Artes y Magisterio. Además nos ha ofrecido la oportunidad de construir experiencias de aprendizaje donde hemos aprendido a trabajar de un modo colaborativo entre docentes y estudiantes.

Creating replicas of scultural heritage through 3D reconstruction and low cost 3D printer in Education

The process of making replicas of heritage has traditionally been developed by public agencies, corporations and museums and is not commonly used in schools. Currently there are technologies that allow creating cheap replicas. The new 3D reconstruction software, based on photographs and low cost 3D printers allow to make replicas at a cost much lower than traditional. This article describes the process of creating replicas of the sculpture Goslar Warrior of artist Henry Moore, located in Santa Cruz de Tenerife. To make this process, first, a digital model have been created using Autodesk Recap 360, Autodesk 123D Catch and Autodesk Meshmixer MarkerBot MakerWare applications. Physical replication, has been reproduced in polylactic acid (PLA) by MakerBot Replicator 2 3D printer. In addition, a cost analysis using, in one hand, the printer mentioned, and in the other hand, 3D printing services both online and local, is included. Finally, there has been a specific action with 141 students and 12 high school teachers, who filled a questionnary about the use of sculptural replicas in education.

Joaquim Mir y la tienda de juguetes: microhistoria de un retrato

¿Puede un retrato pictórico suscitar un ejercicio de microhistoria? Nuestra investigación tratará de aportar una respuesta positiva a esta cuestión, analizando para ello uno de los pocos retratos del pintor postimpresionista Joaquim Mir Trinxet, fechado en 1926. El protagonista representado no es otro que el suegro del pintor, Antoni Estalella i Trinxet, un insigne personaje de Vilanova y la Geltrú (Barcelona) que vivió entre dos siglos. La obra está ambientada en la tienda de juguetes de la familia, convirtiéndose así en una de las escasas pinturas que han captado el interior de una juguetería en la España anterior a la Guerra Civil. Gracias a los trabajos de archivo realizados, este artículo reúne diversos documentos inéditos que permiten reconstruir no sólo la vida del retratado, que llegó a ser corresponsal de Francisco Pi y Margall, sino también el ambiente social, artístico y comercial de Vilanova, en un período que abarca desde la década de 1870 a la primera mitad del siglo XX, en plena “Edad de Oro” de la industria juguetera. Es esta una propuesta de metodología historiográfica cuyo recorrido comienza en el oficio arcaico de la tonelería para desembocar al fin en los albores del comercio moderno de juguetes.

Patrimonio e Identidad en la Investigación Educativa Basada en las Artes desde un Enfoque Multimodal

Este artículo describe dos experiencias de investigación de nuestro grupo interconectadas, la primera desarrollada durante el año 2007 a través del proyecto internacional CALVINO del Programa Cultura 2000 de la Unión Europea, y la segunda implementada durante el año 2014 en el marco del Proyecto Investigación e Innovación en Secundaria en Andalucía (PIIISA). Ambos proyectos tienen en común el eje temático de la identidad a partir de una idea de patrimonio y el hecho de haber puesto en práctica metodologías de investigación basadas en las artes visuales con un enfoque multimodal. Desde estos dos puntos de anclaje relativos a la temática (qué) y a la metodología (cómo) analizamos lo acontecido para obtener conclusiones relevantes que, por una parte, pongan en valor estas prácticas significativas y, por otra, aporten nuestra experiencia para futuras propuestas de investigación en el ámbito temático y/o metodológico.

Redescubrir la dinámica escultórica desde el trabajo en grupo

La iniciativa que se describe en este artículo, surge de una propuesta de investigación plástica, que se inició espontáneamente en el seno de una asignatura de escultura en la Facultad de Bellas Artes del CES Felipe II-UCM, y que tuvo como principal objetivo explorar nuevos modos de enseñanza artística desde la dinámica creativa en sí misma, con el fin de motivar el aprendizaje desde la participación directa en propuestas creativas que se apoyen en métodos de intervención crítica y que exploren las ventajas de las dinámicas interdisciplinares para complementar las eficacias de los ejercicios individuales, y así poder generar un aprendizaje desde dinámicas de trabajo en grupo. Para ello, hemos puesto en marcha procesos de trabajo cooperativo valorando sobre todo la experiencia directa, ofreciendo a los estudiantes contribuir en la actividad, tomar decisiones, lo que les permite aportar ideas, puntos de vista y opiniones sobre la combinación de nuevas tecnologías y técnicas tradicionales de la escultura, usados en proyectos artísticos actuales.

Relocation, reproduction and remaining alive in the orb-web spider

When mortality is high, animals run a risk if they wait to accumulate resources for improved reproduction so they may trade-off the time of reproduction with number and size of offspring. Animals may attempt to improve food acquisition by relocation, even in 'sit and wait' predators. We examine these factors in an isolated population of an orb-web spider Zygiella x-notata. The population was monitored for 200 days from first egg laying until all adults had died. Large females produced their first clutch earlier than did small females and there was a positive correlation between female size and the number and size of eggs produced. Many females, presumably without eggs, abandoned their web site and relocated their web position. This is presumed because female Zygiella typically guard their eggs. In total, c. 25% of females reproduced but those that relocated were less likely to do so, and if they did, they produced the clutch at a later date than those that remained. When the date of lay was controlled there was no effect of relocation on egg number but relocated females produced smaller eggs. The data are consistent with the idea that females in resource-poor sites are more likely to relocate. Relocation seems to be a gamble to find a more productive site but one that achieves only a late clutch of small eggs and few achieve that.

Effect of plane of nutrition of 1-and 2-year-old ewes in early and mid-pregnancy on ewe reproduction and offspring performance up to weaning

The objective of the present study was to determine the effect of plane of nutrition in early pregnancy (EP) and mid-pregnancy (W), on the productive performance of 1- and 2-year-old ewes and their offspring. Over 2 successive years, between days 0 and 39 after synchronized mating (EP), 1- (n=117) and 2- (n=52) year-old ewes were allowed 60% (low, L-EP), 100% (medium, M-EP) or 200% (high, H-EP) of requirements for maintenance (M). Between days 40 and 90 (MP), 1-year-old ewes were allowed 140% (M-MP) or 200% (H-MP), while 2-year-old ewes were allowed 80% (M-MP) or 140% (H-MP) of their M requirement. After day 90, all ewes were fed to meet requirements for late pregnancy. Increasing the plane of nutrition between days 0 and 39 resulted in increases in live weight (LW) (PM-EP>LEP), differences that in 1-year-old ewes were sustained to lambing (P0.05). These ewes exhibited more positive maternal behaviours (e.g. increased grooming frequency and duration, P

Nutritonal status of adult ewes during early and mid-pregnancy. 1. Effects of plane of nutrition on ewe reproduction and offspring performance to weaning

The objective of this study was to determine the effects of plane of nutrition during early and mid-pregnancy on the performance of mature ewes and their offspring. From day 0 to day 39 post mating (early pregnancy, EP), 82 multiparous ewes were fed to provide either 60% (low, L), 100% (medium, M) or 200% (high, H) of predicted metabolisable energy (ME) requirements for maintenance, following a synchronised mating. From day 40 to day 90 (mid-pregnancy, MP), ewes were provided with either 80% (M) or 140% (H) of ME requirements. After 90 days of gestation, all ewes were fed to meet requirements for late pregnancy. During EP, mean live weight (LW) and body condition score (BCS) change of ewes were -6.3, -0.8 and +6.0kg and -0.02, +0.10 and +0.22 units in the L-, M- and H-EP treatments, respectively. During MP, mean LW and BCS change were -0.8 and +4.9kg and -0.09 and +0.09 units in the M- and H-MP treatments, respectively (P 0. 05) on conception rate, although there tended to be an inverse relationship (P = 0.085) between plane of nutrition in EP and plasma progesterone concentrations at day 42 of gestation. EP nutrition influenced foetal development with lambs from ewes offered diet L-EP being smaller (P

Nutritional status of adult ewes during early and mid-pregnancy. 2. Effects of supplementation with selenised yeast on ewe reproduction and offspring performance to weaning

The objective of this study was to determine the effects of selenium (Se) supplementation of mature ewes in the period from day - 14 to day 90 post mating on Se status, productivity and viability of ewes and their offspring. Multiparous crossbred ewes (n = 82) were randomly assigned to receive a standard dried grass-based diet (control) or dried grass diet supplemented with 1 g of selenised yeast (Selplex (R)), providing 0.5 mg Se per ewe per day. After day 90 post mating, all ewes were offered grass-based diets supplemented with a standard multivitamin and mineral mix, up to lambing. Ewes that were fed additional Se had increased (P 0,05). Supplemented ewes weaned lambs on average 2 kg heavier than control ewes, due to the higher (P

Clinical significance of sperm DNA damage in assisted reproduction outcome

Background: Sperm DNA damage shows great promise as a biomarker of infertility. The study aim is to determine the usefulness of DNA fragmentation (DF), including modified bases (MB), to predict assisted reproduction treatment (ART) outcomes. Methods: DF in 360 couples (230 IVF and 130 ICSI) was measured by the alkaline Comet assay in semen and in sperm following density gradient centrifugation (DGC) and compared with fertilization rate (FR), embryo cumulative scores (ECS1) for the total number of embryos/treatment, embryos transferred (ECS2), clinical pregnancy (CP) and spontaneous pregnancy loss. MB were also measured using formamidopyrimidine DNA glycosylase to convert them into strand breaks. Results: In IVF, FR and ECS decreased as DF increased in both semen and DGC sperm, and couples who failed to achieve a CP had higher DF than successful couples (+12.2 semen, P = 0.004; +9.9 DGC sperm, P = 0.010). When MB were added to existing strand breaks, total DF was markedly higher (+17.1 semen, P = 0.009 and +13.8 DGC sperm, P = 0.045). DF was not associated with FR, ECS or CP in either semen or DGC sperm following ISCI. In contrast, by including MB, there was significantly more DNA damage (+16.8 semen, P = 0.008 and +15.5 DGC sperm, P = 0.024) in the group who did not achieve CP. Conclusion: SDF can predict ART outcome for IVF. Converting MB into further DNA strand breaks increased the test sensitivity, giving negative correlations between DF and CP for ICSI as well as IVF. © 2010 The Author.

A survey of sewer rehabilitation in Malaysia: application of trenchless technologies

This work presents a review of applicable sewer rehabilitation options using trenchless technology in Malaysia. The typical problems faced in wastewater collection systems are analysed and factors that determine the selection method are outlined. This study also highlights the necessary steps to be taken prior to the rehabilitation work. The trenchless technology reviewed here comprises repair, renovation and replacement options. The cost-effectiveness of different rehabilitation methods was identified to assess the economic viability of various options in the Malaysian context. This study reveals that not all the trenchless technologies available in the market are suitable for use in Malaysia, mainly due to incompatibility of the rehabilitation materials used. Furthermore, as trenchless rehabilitation generally involves higher capital outlay than open-cut methods, the choice of rehabilitation method has to be made on a case-to-case basis.