956 resultados para FREEDOM
Resumo:
The republican case for workplace democracy (WD) is presented and defended from two alternative means of ensuring freedom from arbitrary interference in the firmnamely, (a) the right to freely exit the firm and (b) workplace regulation. This paper shows, respectively, that costless exit is neither possible nor desirable in either perfect or imperfect labor markets, and that managerial discretion is both desirable and inevitable due to the incompleteness of employment contracts and labor legislation. The paper then shows that WD is necessary, from a republican standpoint, if workers" interests are to be adequately tracked in the exercise of managerial authority. Three important objections are finally addressed (i) that WD is redundant, (ii) that it is unnecessary provided that litigation and unionism can produce similar outcomes, and (iii) that it falls short of ensuring republican freedom compared to self-employment.
Resumo:
This master’s thesis is focused on the active magnetic bearings control, specifically the robust control. As carrying out of such kind of control used mixed H2/Hinf controller. So the goal of this work is to design it using Robust Control Toolbox™ in MATLAB and compare it performance and robustness with Hinf robust controller characteristics. But only one degree-of-freedom controller considered.
Resumo:
Tutkielmassa tarkastellaan avainhyödyke doktriini kehittymistä ja sen soveltamista Euroopan yhteisön kilpailuoikeudessa. Avainhyödyke doktriinissa määräävässä markkina asemassa olevalla yrityksellä on hallussaan hyödyke, palvelu tai infrastruktuuri, jonka uudelleen tuottaminen samoilla markkinoilla ei ole kannattavaa. Määräävässä asemassa olevan yrityksen kilpailijoille tai alalle pyrkiville uusille yrityksille on kuitenkin välttämätöntä päästä käyttämään kyseistä avainhyödykettä, mikäli he haluavat toimia alalla. Tällaisissa tilanteissa avainhyödykkeen haltijalle voidaan asettaa kilpailuoikeudellinen velvollisuus ryhtyä liikesuhteeseen kilpailijoiden ja alalle pyrkivien yritysten kanssa. Avainhyödyke doktriinin soveltaminen nousee erityisen tärkeäksi aloilla, joilta on juuri purettu sääntely. Näillä aloilla doktriinin voidaan katsoa turvaavan jonkinlaisen tasapuolisuuden markkinoilla ja lisäävän kilpailua. Tästä huolimatta avainhyödyke doktriinia on kritisoitu runsaasti, sillä siinä ei oteta huomioon omistusoikeutta, sopimusvapautta tai yleensä taloudellisen toimijan autonomiaa. Avainhyödyke doktriinin kilpailuoikeudellisesta ristiriitaisuudesta olennaisena osoituksena on, ettei Euroopan yhteisön tuomioistuin ei ole ottanut kantaa doktriinin olemassaoloon.
Resumo:
[spa]En las historias generales de la tolerancia religiosa no figura Helisaeus Röslin. Sin embargo Carlos Gilly ha mostrado en diferentes trabajos que el médico suabo-alsaciano sostuvo a lo largo de su obra de modo incansable la necesidad de la libertad religiosa y de conciencia como un postulado religioso y como un factor de progreso económico y paz social. El presente trabajo pretende analizar en profundidad la teorización rösliniana de la libertad de religión poniéndola en relación con su concepción de la historia, con su obra de cronología y con su interpretación de las novedades celestes contemporáneas, en particular la nova de 1604 y el descubrimiento galileano de los planetas mediceos en 1610, tal como se refleja en dos de las últimas obras de Röslin: Mitternächtige Schiffarth (1611) y la Tabella des Welt Spiegels (1612).
Resumo:
A brain-computer interface (BCI) is a new communication channel between the human brain and a computer. Applications of BCI systems comprise the restoration of movements, communication and environmental control. In this study experiments were made that used the BCI system to control or to navigate in virtual environments (VE) just by thoughts. BCI experiments for navigation in VR were conducted so far with synchronous BCI and asynchronous BCI systems. The synchronous BCI analyzes the EEG patterns in a predefined time window and has 2 to 3 degrees of freedom.
Resumo:
El Parlament de Catalunya «ha aprobado la moción presentada por CiU sobre la ocultación o disimulación del rostro en el espacio público y las medidas que se deben adoptar en materia de seguridad pública» (18/7/2013). Esta iniciativa para impedir el uso del velo integral mediante nuevas normativas legales sobre seguridad ha reabierto la polémica entre prohibicionistas y no prohibicionistas.
Resumo:
El software lliure està tenint últimament un pes cada cop més important en les empreses, però encara és el gran desconegut per a molta gent. Des de la seva creació als anys 80 fins ara, hi ha hagut un creixement exponencial de software lliure de gran qualitat, oferint eines per a tot tipus de necessitats, eines ofimàtiques, gestors de correu, sistemes de fitxer, sistemes operatius…. Tot aquest moviment no ha passat desapercebut per a molts usuaris i empreses, que s’han aprofitat d’ell per cobrir les seves necessitats. Pel que fa a les empreses, cada cop n’hi ha més que en petita o gran mesura, utilitzen el software lliure, ja sigui per el seu menor cost d’adquisició, o bé per la seva gran fiabilitat o per que és fàcilment adaptable o per no establir cap lligam tecnològic, en definitiva per tenir més llibertat. En el moment de la creació d’una nova empresa, on es parteix de zero en tota la tecnologia informàtica, és el moment menys costòs d’implementar l’arquitectura informàtica amb software lliure, és quan l’impacte que té sobre l’empresa, usuaris i clients és menor. En les empreses que ja tenen un sistema informàtic, caldrà establir un pla de migració, ja sigui total o parcial. La finalitat d’aquest projecte no és la de dir quin software és millor que l’altre o de dir quin s’ha d’instal•lar, sinó el de donar a conèixer el món del software lliure, mostrar part d’aquest software, fer alguna comparativa de software lliure amb software propietari, donant idees i un conjunt de solucions per a empreses, per què una empresa pugui agafar idees d’implementació d’algunes de les solucions informàtiques exposades o seguir algun dels consells proposats. Actualment ja hi ha moltes empreses que utilitzen software lliure. Algunes només n’utilitzen una petita part en les seves instal•lacions, ja que el fet de que una empresa funcioni al 100% amb software lliure, tot i que n’hi comença ha haver, de moment ho considero una mica arriscat, però que en poc temps, aquest fet serà cada cop més habitual.
Resumo:
Actualment la majoria de nosaltres sabem de l’existència de molts programes lliures, però hem tenir clar que lliure no vol dir sempre programa gratuït. Tot i que a vegades sí que pot ser-ho, es té en compte molt més que això: és una manera de pensar i entendre el programari i al llarg dels anys ha generat tot un moviment social. Considerem que un programa lliure és aquell que garanteix als usuaris la llibertat per executar, copiar, distribuir, estudiar, canviar i millorar el codi programat, com molt bé defineixen les seves llibertats bàsiques. El programari lliure el podem trobar funcionant en ordinadors personals, escoles, empreses diverses, administracions, etc. ja que la majoria de programes que utilitzenactualment, com hem vist, tenen el seu equivalent en lliure. El fet de si és viable que una empresa es passi a programari lliure, depèn ben bé del seu entorn, ja que en funció d’aquest li serà més o menys fàcil la migració. La finalitat d’aquest projecte és, primer de tot, fer un ampli estudi del món del programari lliure i del seu moviment social. S’ha fet una recerca de diferents aspectes dins del programari lliure per conèixer-lo a fons i després s’ha proposat una possible implantació d’aquest en un usuari domèstic i en una administració pública, tenint en compte tots els aspectes vistos en l’estudi, valorant si totes les idees que defensa i els beneficis que aporta són aplicables i viables en qualsevol persona i àmbit i el perquè. Com a conclusió principal en destacaria que tot i que el programa lliure disposa d’una ideologia que agrada i té uns programes tècnicament perfectes (sense que això sigui el seu objectiu principal), penso que encara hi ha molt camí per recórrer quant a una migració en grans entorns, ja que per exemple en un ajuntament una migració total és encara difícil (tot i que no impossible perquè n’hi ha que s’hi han migrat). A l’apartat d’annexos s’hi inclou un glossari amb un seguit de terminologies amb paraules que no tothom pot saber i s’ha cregut oportú incloure-les en aquest apartat. La primera vegada que apareix alguna d’aquestes paraules la podem trobar senyalitzada amb un *.
Resumo:
Sensor-based robot control allows manipulation in dynamic environments with uncertainties. Vision is a versatile low-cost sensory modality, but low sample rate, high sensor delay and uncertain measurements limit its usability, especially in strongly dynamic environments. Force is a complementary sensory modality allowing accurate measurements of local object shape when a tooltip is in contact with the object. In multimodal sensor fusion, several sensors measuring different modalities are combined to give a more accurate estimate of the environment. As force and vision are fundamentally different sensory modalities not sharing a common representation, combining the information from these sensors is not straightforward. In this thesis, methods for fusing proprioception, force and vision together are proposed. Making assumptions of object shape and modeling the uncertainties of the sensors, the measurements can be fused together in an extended Kalman filter. The fusion of force and visual measurements makes it possible to estimate the pose of a moving target with an end-effector mounted moving camera at high rate and accuracy. The proposed approach takes the latency of the vision system into account explicitly, to provide high sample rate estimates. The estimates also allow a smooth transition from vision-based motion control to force control. The velocity of the end-effector can be controlled by estimating the distance to the target by vision and determining the velocity profile giving rapid approach and minimal force overshoot. Experiments with a 5-degree-of-freedom parallel hydraulic manipulator and a 6-degree-of-freedom serial manipulator show that integration of several sensor modalities can increase the accuracy of the measurements significantly.
Resumo:
It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.
Resumo:
During the schooling process, images are constructed about research and researcher activities. Based on that, a questionnaire has been structured based on three thematic axes that tend to represent some of the discussions about the translations that integrate the scientific activity collectively: freedom and demands from research, academia as a mediator and science disclosure. The objective of the instrument was to map some notions from entrants to the graduation course in Chemistry in the metropolitan region of Porto Alegre about what, based on the contributions by Bruno Latour, was called vascularizations of research.
Resumo:
Kirjallisuusarvostelu
Resumo:
Juutalaisen filosofin Emmanuel Levinasin (1906-1995) ajattelusta käydyn keskustelun valossa ei ole itsestään selvää, että hänen etiikkansa on historiallista. Tutkielmassa etiikan historiallisuus perustellaan ja ymmärretään kolmesta näkökulmasta: ensiksi etiikan elämänhistoriallisena tulkintana, seuraavaksi etiikkaan sisältyvänä historianfilosofiana ja lopuksi lukion historian oppikirjojen eettisyyden tarkasteluna. Työn dispositio on sen keskeisimpiä tuloksia. Elämänhistoriasta liikkeelle lähtevä tulkinta paljastaa, että sekä Levinasin omat kokemukset holokaustista että juutalaisen muistamisen pitkä perinne motivoivat häntä käymään ylihistoriallista historianfilosofista keskustelua. Edelleen hänen ajattelunsa vaatii tämän keskustelun tulosten soveltamista käytännön elämään ja tutkimukseen, myös historiankirjoitukseen. Keskeisin lähde Levinasin tuotannossa on Otherwise than Being or Beyond Essence. Myös teokset Totality and Infinity ja, juutalaisuuden osalta, Difficult Freedom ovat useiden tulkintojen pohjalla. Levinasin ajatteluun keskittyvässä kotimaisessa tutkimuskirjallisuudessa tärkeä keskustelukumppani on Jukka Hankamäki ja ulkomaisessa mm. Aadrian Peperzak ja Rudi Visker. Historianteoreettista keskustelua käydään ennen kaikkea Kari Immosen, Jorma Kalelan ja Edith Wyschogrodin kanssa. Tutkielman päättävän tapaustutkimuksen aineistopohjan muodostavat kahdeksan tutkielman kirjoitushetkellä opetuskäytössä olevaa lukion historian oppikirjaa. Tutkielma keskittyy Levinasin filosofiaan kuuluvaan ylihistoriallisuuden ja historiallisuuden jännitteeseen. Ylihistoriallisuus tulkitaan myös inhimilliseksi toiseudeksi ja historiallisuus kulttuuriseksi toiseudeksi. Levinasin mukaan kumpiakin tarvitaan eettisen historiankirjoituksen onnistumiseksi, mutta kulttuurinen toiseus uhkaa usein tukahduttaa inhimillisen toiseuden. Tapaustutkimuksessa päädytään siihen, että lukion historian oppikirjoissa kulttuurinen toiseus ja sille läheinen historian läsnäolo todella uhkaavat peittää alleen menneisyyden ihmisten kuolevaisuuden ja korvaamattomuuden. Menneisyyden ihmisten poissaolon vahvempi huomioiminen historian läsnäolon rinnalla voisi helpottaa etiikan käsittelyn ongelmia, jotka ovat selvästi havaittavissa niin opetussuunnitelman perusteissa kuin oppikirjoissakin. Tutkielmassa myös nostetaan oppikirjoista esimerkkejä, joissa on toimittu onnistuneesti juuri näin. Sama suositus esitetään myös kulttuurihistorian tutkimukselle ja historianteoreettiselle keskustelulle, jossa historian läsnäolon pohdinta ylikorostuu.
Resumo:
Tutkielman tavoitteena on kuvata valtio-omistajan vaikutusmahdollisuudet ja vaikuttamiskeinot valtioenemmistöisen osakeyhtiön hallintoon voimassa olevan osakeyhtiölain mukaisesti. Tutkielmassa paneudutaan osakeyhtiön johdon tehtävien ja velvollisuuksien lisäksi valtion rooliin ja asemaan yhtiön omistajana sekä selvitetään valtion omistajavallan jakautumista valtiollisten toimijoiden välillä. Tutkimusmetodina on käytetty oikeusdogmatiikkaa. Tutkielman pääasiallisena lähdeaineistona on voimassa oleva lainsäädäntö valmisteluaineistoineen. Lisäksi lähteinä on käytetty kotimaista oikeuskirjallisuutta, viranomaisten ohjeistuksia ja kannanottoja sekä ajankohtaisia asiantuntija-artikkeleita. Osakeyhtiö on nykyisin tyypillisin yritysmuoto liiketoiminnan harjoittamiseen myös valtion omistamana. Valtio omistaa merkittävästi osakkeita hyvin erityyppisissä yhtiöissä ja hyvin erisuuruisin osuuksin. Enemmistöosakkeenomistajuus tuo käytännössä valtiolle päätösvallan yhtiökokouksessa yhtiön merkittävistä ja laajakantoisista asioista strategisista linjauksista ja hallituksen jäsenten valinnasta päätettäessä. Jo yhtiötä perustettaessa valtio enemmistöosakkaana voi määrätä yhtiöjärjestyksessä melko vapaasti yhtiön tarkoituksesta ja hallinnon järjestämisestä. Hallitus ja toimitusjohtaja toimivat omistajan tahdon ja yhtiön tarkoituksen mukaisesti, mutta kuitenkin itsenäisesti yhtiön edun parhaaksi. Valtio-omistajuus ei tarkoita osakeyhtiön hallinnon ja toiminnan erilaisuutta muihin yhtiöihin nähden, vaan yhtiö toimii hyvän hallintotavan mukaisesti liiketoimintaperiaattein, johon myös valtion omistajaohjauksella pyritään.