Methodological study of the cryoconservation processes in miocroalgae

[EN]Two cryopreservation methods, controlled cooling and encapsulation/vitrification, were studied in order to find an appropriate protocol to maintain microalgae cultures by exposing them to ultra-low temperatures (cryogenics). This study has shown that the most efficient cryopreserving method is the use of cryoprotectants, being Glycerol and DMSO the best options for this procedure, and dismissing the encapsulation/vitrification method due to the low effectiveness, which results in a low post-thaw viability rate and a higher demanding of labour and consumables.

Un nuovo processo per la sintesi di acroleina e acido acrilico da glicerolo

La trasformazione di glicerolo ad acido acrilico può essere un fattore importante per la valorizzazione del processo di produzione di biodiesel, il quale prevede la coproduzione di enormi quantità di glicerolo. La sintesi di acido acrilico in un unico step è stata studiata attraverso vari catalizzatori solidi bifunzionali di diversa natura, contenenti proprietà acide e redox. I catalizzatori devono avere un’adeguata acidità di Brønsted per promuovere la trasformazione di glicerolo ad acroleina, mentre le proprietà ossidanti, necessarie per la sintesi di acido acrilico sono ottenute mediante l’inserimento di un metallo ossidante nella struttura. Si vuole quindi sintetizzare e testare una serie di catalizzatori che mostrino questa bifunzionalità in grado di soddisfare requisiti di attività e selettività nei confronti della reazioni . Per questo studio sono stati sintetizzati e caratterizzati ossidi misti di W/V, nella forma di aggregati dispersi sulla titania ed ossidi misti di Zr/Nb/V in struttura bulk. Sono stati quindi eseguiti dei test di reattività in fase gas ed in presenza di ossigeno utilizzando un reattore tubolare in quarzo a letto fisso.

Porous Polymeric Bioresorbable Scaffolds for Tissue Engineering

Tissue engineering is a discipline that aims at regenerating damaged biological tissues by using a cell-construct engineered in vitro made of cells grown into a porous 3D scaffold. The role of the scaffold is to guide cell growth and differentiation by acting as a bioresorbable temporary substrate that will be eventually replaced by new tissue produced by cells. As a matter or fact, the obtainment of a successful engineered tissue requires a multidisciplinary approach that must integrate the basic principles of biology, engineering and material science. The present Ph.D. thesis aimed at developing and characterizing innovative polymeric bioresorbable scaffolds made of hydrolysable polyesters. The potentialities of both commercial polyesters (i.e. poly-e-caprolactone, polylactide and some lactide copolymers) and of non-commercial polyesters (i.e. poly-w-pentadecalactone and some of its copolymers) were explored and discussed. Two techniques were employed to fabricate scaffolds: supercritical carbon dioxide (scCO2) foaming and electrospinning (ES). The former is a powerful technology that enables to produce 3D microporous foams by avoiding the use of solvents that can be toxic to mammalian cells. The scCO2 process, which is commonly applied to amorphous polymers, was successfully modified to foam a highly crystalline poly(w-pentadecalactone-co-e-caprolactone) copolymer and the effect of process parameters on scaffold morphology and thermo-mechanical properties was investigated. In the course of the present research activity, sub-micrometric fibrous non-woven meshes were produced using ES technology. Electrospun materials are considered highly promising scaffolds because they resemble the 3D organization of native extra cellular matrix. A careful control of process parameters allowed to fabricate defect-free fibres with diameters ranging from hundreds of nanometers to several microns, having either smooth or porous surface. Moreover, versatility of ES technology enabled to produce electrospun scaffolds from different polyesters as well as “composite” non-woven meshes by concomitantly electrospinning different fibres in terms of both fibre morphology and polymer material. The 3D-architecture of the electrospun scaffolds fabricated in this research was controlled in terms of mutual fibre orientation by properly modifying the instrumental apparatus. This aspect is particularly interesting since the micro/nano-architecture of the scaffold is known to affect cell behaviour. Since last generation scaffolds are expected to induce specific cell response, the present research activity also explored the possibility to produce electrospun scaffolds bioactive towards cells. Bio-functionalized substrates were obtained by loading polymer fibres with growth factors (i.e. biomolecules that elicit specific cell behaviour) and it was demonstrated that, despite the high voltages applied during electrospinning, the growth factor retains its biological activity once released from the fibres upon contact with cell culture medium. A second fuctionalization approach aiming, at a final stage, at controlling cell adhesion on electrospun scaffolds, consisted in covering fibre surface with highly hydrophilic polymer brushes of glycerol monomethacrylate synthesized by Atom Transfer Radical Polymerization. Future investigations are going to exploit the hydroxyl groups of the polymer brushes for functionalizing the fibre surface with desired biomolecules. Electrospun scaffolds were employed in cell culture experiments performed in collaboration with biochemical laboratories aimed at evaluating the biocompatibility of new electrospun polymers and at investigating the effect of fibre orientation on cell behaviour. Moreover, at a preliminary stage, electrospun scaffolds were also cultured with tumour mammalian cells for developing in vitro tumour models aimed at better understanding the role of natural ECM on tumour malignity in vivo.

Catalytic liquid- and gas-phase oxidations for the synthesis of intermediates and specialty chemicals: some examples of industrial relevance

Nowadays, it is clear that the target of creating a sustainable future for the next generations requires to re-think the industrial application of chemistry. It is also evident that more sustainable chemical processes may be economically convenient, in comparison with the conventional ones, because fewer by-products means lower costs for raw materials, for separation and for disposal treatments; but also it implies an increase of productivity and, as a consequence, smaller reactors can be used. In addition, an indirect gain could derive from the better public image of the company, marketing sustainable products or processes. In this context, oxidation reactions play a major role, being the tool for the production of huge quantities of chemical intermediates and specialties. Potentially, the impact of these productions on the environment could have been much worse than it is, if a continuous efforts hadn’t been spent to improve the technologies employed. Substantial technological innovations have driven the development of new catalytic systems, the improvement of reactions and process technologies, contributing to move the chemical industry in the direction of a more sustainable and ecological approach. The roadmap for the application of these concepts includes new synthetic strategies, alternative reactants, catalysts heterogenisation and innovative reactor configurations and process design. Actually, in order to implement all these ideas into real projects, the development of more efficient reactions is one primary target. Yield, selectivity and space-time yield are the right metrics for evaluating the reaction efficiency. In the case of catalytic selective oxidation, the control of selectivity has always been the principal issue, because the formation of total oxidation products (carbon oxides) is thermodynamically more favoured than the formation of the desired, partially oxidized compound. As a matter of fact, only in few oxidation reactions a total, or close to total, conversion is achieved, and usually the selectivity is limited by the formation of by-products or co-products, that often implies unfavourable process economics; moreover, sometimes the cost of the oxidant further penalizes the process. During my PhD work, I have investigated four reactions that are emblematic of the new approaches used in the chemical industry. In the Part A of my thesis, a new process aimed at a more sustainable production of menadione (vitamin K3) is described. The “greener” approach includes the use of hydrogen peroxide in place of chromate (from a stoichiometric oxidation to a catalytic oxidation), also avoiding the production of dangerous waste. Moreover, I have studied the possibility of using an heterogeneous catalytic system, able to efficiently activate hydrogen peroxide. Indeed, the overall process would be carried out in two different steps: the first is the methylation of 1-naphthol with methanol to yield 2-methyl-1-naphthol, the second one is the oxidation of the latter compound to menadione. The catalyst for this latter step, the reaction object of my investigation, consists of Nb2O5-SiO2 prepared with the sol-gel technique. The catalytic tests were first carried out under conditions that simulate the in-situ generation of hydrogen peroxide, that means using a low concentration of the oxidant. Then, experiments were carried out using higher hydrogen peroxide concentration. The study of the reaction mechanism was fundamental to get indications about the best operative conditions, and improve the selectivity to menadione. In the Part B, I explored the direct oxidation of benzene to phenol with hydrogen peroxide. The industrial process for phenol is the oxidation of cumene with oxygen, that also co-produces acetone. This can be considered a case of how economics could drive the sustainability issue; in fact, the new process allowing to obtain directly phenol, besides avoiding the co-production of acetone (a burden for phenol, because the market requirements for the two products are quite different), might be economically convenient with respect to the conventional process, if a high selectivity to phenol were obtained. Titanium silicalite-1 (TS-1) is the catalyst chosen for this reaction. Comparing the reactivity results obtained with some TS-1 samples having different chemical-physical properties, and analyzing in detail the effect of the more important reaction parameters, we could formulate some hypothesis concerning the reaction network and mechanism. Part C of my thesis deals with the hydroxylation of phenol to hydroquinone and catechol. This reaction is already industrially applied but, for economical reason, an improvement of the selectivity to the para di-hydroxilated compound and a decrease of the selectivity to the ortho isomer would be desirable. Also in this case, the catalyst used was the TS-1. The aim of my research was to find out a method to control the selectivity ratio between the two isomers, and finally to make the industrial process more flexible, in order to adapt the process performance in function of fluctuations of the market requirements. The reaction was carried out in both a batch stirred reactor and in a re-circulating fixed-bed reactor. In the first system, the effect of various reaction parameters on catalytic behaviour was investigated: type of solvent or co-solvent, and particle size. With the second reactor type, I investigated the possibility to use a continuous system, and the catalyst shaped in extrudates (instead of powder), in order to avoid the catalyst filtration step. Finally, part D deals with the study of a new process for the valorisation of glycerol, by means of transformation into valuable chemicals. This molecule is nowadays produced in big amount, being a co-product in biodiesel synthesis; therefore, it is considered a raw material from renewable resources (a bio-platform molecule). Initially, we tested the oxidation of glycerol in the liquid-phase, with hydrogen peroxide and TS-1. However, results achieved were not satisfactory. Then we investigated the gas-phase transformation of glycerol into acrylic acid, with the intermediate formation of acrolein; the latter can be obtained by dehydration of glycerol, and then can be oxidized into acrylic acid. Actually, the oxidation step from acrolein to acrylic acid is already optimized at an industrial level; therefore, we decided to investigate in depth the first step of the process. I studied the reactivity of heterogeneous acid catalysts based on sulphated zirconia. Tests were carried out both in aerobic and anaerobic conditions, in order to investigate the effect of oxygen on the catalyst deactivation rate (one main problem usually met in glycerol dehydration). Finally, I studied the reactivity of bifunctional systems, made of Keggin-type polyoxometalates, either alone or supported over sulphated zirconia, in this way combining the acid functionality (necessary for the dehydrative step) with the redox one (necessary for the oxidative step). In conclusion, during my PhD work I investigated reactions that apply the “green chemistry” rules and strategies; in particular, I studied new greener approaches for the synthesis of chemicals (Part A and Part B), the optimisation of reaction parameters to make the oxidation process more flexible (Part C), and the use of a bioplatform molecule for the synthesis of a chemical intermediate (Part D).

Length scales of dynamic heterogeneities of low and high molecular weight glass formers from multidimensional NMR

Das Ziel der vorliegenden Arbeit ist die Untersuchung der räumlichen und zeitlichen Aspekte der heterogenen Dynamik in Modellglasbildnern. Dabei wird vor allem die langsame alpha-Relaxationsdynamik oberhalb des Glasüberganges Tg untersucht. Die nukleare Magnetresonanz zeigt ihre einmalige Vielseitigkeit bei der Untersuchung molekularer Dynamik, wenn die angewandten Techniken und Experimente durch Simulationen unterstützt werden. Die räumliche Aspekt dynamischer Heterogenitäten wird untersucht durch ein reduziertes vierdimensionales Spindiffusionsexperiment (4D3CP), ein Experiment, das Reorientierungsraten örtlich korreliert. Eine Simulation dieses Experimentes an einem System harter Kugeln liefert wertvolle Informationen über die Auswertemethode des 4D3CP Experiments. Glycerol und o-terphenyl werden durch das 4D3CP Experiment untersucht. Die erhaltenen Resultate werden mit bereits publizierten Daten des polymeren Glasbildners PVAc verglichen. Während PVAc und o-terphenyl eine Längenskale von 3.7 nm bzw. 2.9 nm aufweisen, ist die Längenskale von Glycerol signifikant kleiner bei 1.1 nm. Ein neues Experiment, welches sensitiv auf Translationsbewegung reagiert, wird vorgestellt. Durch Verwendung eines pi-Impulszuges kann eine separate Evolution unter dem Hamiltonian der dipolaren Kopplung und der chemischen Verschiebungsanisotropie erreicht werden.

Relaxationsuntersuchungen in unterkühlten und glasig erstarrten Polyalkoholen mittels dielektrischer und NMR Spektroskopie

Es wurde eine homologe Reihe von Polyalkoholen mit der allgemeinen Summenformel CNHN+2(OH)N (N=3-6) hinsichtlich ihrer Glaseigenschaften ober- und unterhalb der Glasübergangstemperatur TG untersucht. Dabei kamen die dielektrische und magnetische Resonanzspektroskopie (NMR) zum Einsatz. Es ergab sich oberhalb TG eine systematische Zunahme aller untersuchten dynamischen Parameter wie Fragilität, Breite der angenommenen Korrelationszeitenverteilungen und der Sprungwinkel der primären Glasrelaxation mit zunehmendem N. Dies kann insgesamt als eine Abnahme des Netzwerkcharakters, der durch Wasserstoffbrückenbindungen bedingt ist, bei zunehmender Kettenlänge interpretiert werden. Unterhalb TG entwickelt sich mit zunehmendem N die Sekundärrelaxation von einem 'Wing Szenario' zu einem ausgeprägten Johari - Goldstein (JG) - Prozess. Ein Sprungmodell, welches eine eingeschränkte Reorientierung auf einem Konusrand beschreibt, erzeugt mit Hilfe der parametrisierten dielektrischen Verlustspektren Sprungwinkel, die mit denen aus aktuellen ²H - NMR spektroskopischen Untersuchungen vergleichbar sind. Durch den Vergleich unterschiedlich deuterierter Derivate von Glyzerin (N=3) und Sorbitol (N=6) wurde gefolgert, dass auch unterhalb TG der Netzwerkcharakter mit zunehmender Kettenlänge abnimmt.Aufgrund der hier durchgeführten Untersuchungen konnte eine Zeitskala für einen Johari - Goldstein - Prozess im Modellglasbildner Glyzerin extrapoliert werden. Eine Deutung des Wings als Hochfrequenzausläufer des JG - Prozesses ist dadurch möglich.Der JG - Prozess kann somit als universeller Glasprozess interpretiert werden, der in verschiedenen Glasbildnern in unterschiedlicher Ausprägung auftritt.

Charakterisierung der Vinorin-Synthase aus Rauvolfia serpentina durch Reinigung, Expression, Mutation und Kristallisation

ABSTRACTDie vorliegende Arbeit befasste sich mit der Reinigung,heterologen Expression, Charakterisierung, molekularenAnalyse, Mutation und Kristallisation des EnzymsVinorin-Synthase. Das Enzym spielt eine wichtige Rolle inder Ajmalin-Biosynthese, da es in einerAcetyl-CoA-abhängigen Reaktion die Umwandlung desSarpagan-Alkaloids 16-epi-Vellosimin zu Vinorin unterBildung des Ajmalan-Grundgerüstes katalysiert. Nach der Reinigung der Vinorin-Synthase ausHybrid-Zellkulturen von Rauvolfia serpentina/Rhazya strictamit den fünf chromatographischen TrennmethodenAnionenaustauschchromatographie an SOURCE 30Q, HydrophobeInteraktionen Chromatographie an SOURCE 15PHE,Chromatographie an MacroPrep Ceramic Hydroxyapatit,Anionenaustauschchromatographie an Mono Q undGrößenausschlußchromatographie an Superdex 75 konnte dieVinorin-Synthase aus 2 kg Zellkulturgewebe 991fachangereichert werden.Das nach der Reinigung angefertigte SDS-Gel ermöglichte eineklare Zuordnung der Protein-Bande als Vinorin-Synthase.Der Verdau der Enzymbande mit der Endoproteinase LysC unddie darauffolgende Sequenzierung der Spaltpeptide führte zuvier Peptidsequenzen. Der Datenbankvergleich (SwissProt)zeigte keinerlei Homologien zu Sequenzen bekannterPflanzenenzyme. Mit degenerierten Primern, abgeleitet voneinem der erhaltenen Peptidfragmente und einer konserviertenRegion bekannter Acetyltransferasen gelang es, ein erstescDNA-Fragment der Vinorin-Synthase zu amplifizieren. Mit derMethode der RACE-PCR wurde die Nukleoidsequenzvervollständigt, was zu einem cDNA-Vollängenklon mit einerGröße von 1263 bp führte, der für ein Protein mit 421Aminosäuren (46 kDa) codiert.Das Vinorin-Synthase-Gen wurde in den pQE2-Expressionsvektorligiert, der für einen N-terminalen 6-fachen His-tagcodiert. Anschließend wurde sie erstmals erfolgreich in E.coli im mg-Maßstab exprimiert und bis zur Homogenitätgereinigt. Durch die erfolgreiche Überexpression konnte dieVinorin-Synthase eingehend charakterisiert werden. DerKM-Wert für das Substrat Gardneral wurde mit 20 µM, bzw.41.2 µM bestimmt und Vmax betrug 1 pkat, bzw. 1.71 pkat.Nach erfolgreicher Abspaltung des His-tags wurden diekinetischen Parameter erneut bestimmt (KM- Wert 7.5 µM, bzw.27.52 µM, Vmax 0.7 pkat, bzw. 1.21 pkat). Das Co-Substratzeigt einen KM- Wert von 60.5 µM (Vmax 0.6 pkat). DieVinorin-Synthase besitzt ein Temperatur-Optimum von 35 °Cund ein pH-Optimum bei 7.8.Homologievergleiche mit anderen Enzymen zeigten, dass dieVinorin-Synthase zu einer noch kleinen Familie von bisher 10Acetyltransferasen gehört. Alle Enzyme der Familie haben einHxxxD und ein DFGWG-Motiv zu 100 % konserviert. Basierendauf diesen Homologievergleichen und Inhibitorstudien wurden11 in dieser Proteinfamilie konservierte Aminosäuren gegenAlanin ausgetauscht, um so die Aminosäuren einer in derLiteratur postulierten katalytischen Triade(Ser/Cys-His-Asp) zu identifizieren.Die Mutation aller vorhandenen konservierten Serine undCysteine resultierte in keiner Mutante, die zumvollständigen Aktivitätsverlust des Enzyms führte. Nur dieMutationen H160A und D164A resultierten in einemvollständigen Aktivitätsverlust des Enzyms. Dieses Ergebniswiderlegt die Theorie einer katalytischen Triade und zeigte,dass die Aminosäuren H160A und D164A exklusiv an derkatalytischen Reaktion beteiligt sind.Zur Überprüfung dieser Ergebnisse und zur vollständigenAufklärung des Reaktionsmechanismus wurde dieVinorin-Synthase kristallisiert. Die bis jetzt erhaltenenKristalle (Kristallgröße in µm x: 150, y: 200, z: 200)gehören der Raumgruppe P212121 (orthorhombisch primitiv) anund beugen bis 3.3 Å. Da es bis jetzt keine Kristallstruktureines zur Vinorin-Synthase homologen Proteins gibt, konntedie Struktur noch nicht vollständig aufgeklärt werden. ZurLösung des Phasenproblems wird mit der Methode der multiplenanomalen Dispersion (MAD) jetzt versucht, die ersteKristallstruktur in dieser Enzymfamilie aufzuklären.

The coupling between electron transfer and Protein/Solvent Dynamics in Photosynthetic Reaction Centers: Spectroscopic Studies in Amorphous Matrices

We investigated at the molecular level protein/solvent interactions and their relevance in protein function through the use of amorphous matrices at room temperature. As a model protein, we used the bacterial photosynthetic reaction center (RC) of Rhodobacter sphaeroides, a pigment protein complex which catalyzes the light-induced charge separation initiating the conversion of solar into chemical energy. The thermal fluctuations of the RC and its dielectric conformational relaxation following photoexcitation have been probed by analyzing the recombination kinetics of the primary charge-separated (P+QA-) state, using time resolved optical and EPR spectroscopies. We have shown that the RC dynamics coupled to this electron transfer process can be progressively inhibited at room temperature by decreasing the water content of RC films or of RC-trehalose glassy matrices. Extensive dehydration of the amorphous matrices inhibits RC relaxation and interconversion among conformational substates to an extent comparable to that attained at cryogenic temperatures in water-glycerol samples. An isopiestic method has been developed to finely tune the hydration level of the system. We have combined FTIR spectral analysis of the combination and association bands of residual water with differential light-minus-dark FTIR and high-field EPR spectroscopy to gain information on thermodynamics of water sorption, and on structure/dynamics of the residual water molecules, of protein residues and of RC cofactors. The following main conclusions were reached: (i) the RC dynamics is slaved to that of the hydration shell; (ii) in dehydrated trehalose glasses inhibition of protein dynamics is most likely mediated by residual water molecules simultaneously bound to protein residues and sugar molecules at the protein-matrix interface; (iii) the local environment of cofactors is not involved in the conformational dynamics which stabilizes the P+QA-; (iv) this conformational relaxation appears to be rather delocalized over several aminoacidic residues as well as water molecules weakly hydrogen-bonded to the RC.

Ion channels in mixed tethered bilayer lipid membranes

Mixed tethered bilayer lipid membranes (tBLMs) are described based on the self-assembly of a monolayer on template stripped gold, of an archea analogue thiolipid, 2,3-di-o-phytanyl-sn-glycerol-1-tetraethylene glycol-D,L--lipoic acid ester lipid (DPTL), and a newly designed dilution molecule, tetraethylene glycol-D,L--lipoic acid ester (TEGL). The usage of spacer and addition of extra dilution molecules between the substrate and the bilayer is that this architecture provides an ionic reservoir underneath the membrane, avoiding direct contact of the embedded membrane proteins with the gold electrodes and increasing the lateral diffusion of the bilayer, thus allowing for the incorporation of complex channels proteins which are failed in non-diluted systems. The tBLM is completed by fusion of liposomes made from a mixture of 1,2-diphythanolyl-sn-glycero-3-phosphocholine (DPhyPC), cholesterol, and 1,2-diphytanoyl-sn-Glycero-3-phosphate (DPhyPG) in a molar ratio of 6:3:1. Varying the mixing ratio, the optimum mixing ratio was obtained at a dilution factor of DPTL and TEGL at 90%:10%. Only under these conditions, the mixed tBLM showed electrical properties, as shown by EIS, which are comparable to a BLM. With higher dilution factors, a defect-free lipid bilayer was not formed. Formation of bilayers have been characterized by different techniques, such as surface plasmon resonance (SPR), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and quartz crystal microbalance (QCM). Different proteins such as hemolysin, melittin, gramicidin, M2, Maxi-K, nAChR and bacteriohodopsin are incorporated into these tBLMs as shown by SPR and EIS studies. Ionic conductivity at 0 V vs. Ag|AgCl, 3M KCl were measured by EIS measurements. Our results indicate that these proteins have been successfully incorporated into a very stable tBLM environment in a functionally active form. Therefore, we conclude that the mixed tBLMs have been successfully designed as a general platform for biosensing and screening purposes of membrane proteins.

Fermentative processes for environmental remediation

The growing interest in environmental protection has led to the development of emerging biotechnologies for environmental remediation also introducing the biorefinery concept. This work mainly aimed to evaluate the applicability of innovative biotechnologies for environmental remediation and bioenergy production, throught fermentative processes. The investigated biotechnologies for waste and wastewater treatment and for the valorisation of specific feedstocks and energy recovery, were mainly focused on four research lines. 1. Biotechnology for textile wastewater treatment and water reuse that involving anaerobic and aerobic processes in combination with membrane technologies. Combinations of different treatments were also implemented for water reuse in a textile company. 2. Biotechnology for the treatment of solid waste and leachate in landfill and for biogas production. Landfill operated as Bioreactor with recirculation of the generated leachate was proposed for organic matter biostabilisation and for ammonia removal from leachate by favouring the Anammox process. 3. An innovative two-stage anaerobic process for effective codigestion of waste from the dairy industry, as cheese whey and dairy manure, was studied by combining conventional fermentative processes with a simplified system design for enhancing biomethanisation. 4) The valorisation of the glycerol waste as surplus by-product of the biodiesel industry was investigated via microbial conversion to value-added chemicals, as 1,3-propanediol. The investigated fermentative processes have been successfully implemented and reached high yields of the produced bio-chemical. The studied biotechnological systems proved to be feasible for environmental remediation and bioenergy and chemicals production.

The effect of osmolytes on protein fold stability at the single-molecule level

By pulling and releasing the tension on protein homomers with the Atomic Force Miscroscope (AFM) at different pulling speeds, dwell times and dwell distances, the observed force-response of the protein can be fitted with suitable theoretical models. In this respect we developed mathematical procedures and open-source computer codes for driving such experiments and fitting Bell’s model to experimental protein unfolding forces and protein folding frequencies. We applied the above techniques to the study of proteins GB1 (the B1 IgG-binding domain of protein G from Streptococcus) and I27 (a module of human cardiac titin) in aqueous solutions of protecting osmolytes such as dimethyl sulfoxide (DMSO), glycerol and trimethylamine N-oxide (TMAO). In order to get a molecular understanding of the experimental results we developed an Ising-like model for proteins that incorporates the osmophobic nature of their backbone. The model benefits from analytical thermodynamics and kinetics amenable to Monte-Carlo simulation. The prevailing view used to be that small protecting osmolytes bridge the separating beta-strands of proteins with mechanical resistance, presumably shifting the transition state to significantly higher distances that correlate with the molecular size of the osmolyte molecules. Our experiments showed instead that protecting osmolytes slow down protein unfolding and speed-up protein folding at physiological pH without shifting the protein transition state on the mechanical reaction coordinate. Together with the theoretical results of the Ising-model, our results lend support to the osmophobic theory according to which osmolyte stabilisation is a result of the preferential exclusion of the osmolyte molecules from the protein backbone. The results obtained during this thesis work have markedly improved our understanding of the strategy selected by Nature to strengthen protein stability in hostile environments, shifting the focus from hypothetical protein-osmolyte interactions to the more general mechanism based on the osmophobicity of the protein backbone.

Charakterisierung spezieller pflanzlicher Gamma-Tubulin-Sequenzbereiche und Detektion potentieller Interaktionspartner mittels Yeast-two-Hybrid-System

Mitotische und postmitotische Vorgänge pflanzlicher Zellen basieren auf der Funktion von Mikrotubuli. Es liegen nur wenige gesicherte Erkenntnisse zur Organisation dieser Multifunktionalität vor. Eine zentrale Bedeutung wird bei der Nukleation der Mikrotubuli an MTOCs durch γ-Tubulin zugeschrieben. Deren Zusammenlagerung an MTOCs ist jedoch noch nicht richtig verstanden. Domänen, die an der Proteinoberfläche exponiert werden, könnten in Interaktionen involviert sein. Hier werden im Besonderen der γ-A und γ-B-Peptivmotiv diskutiert. Es wurde das γ-A- und γ-B-Peptidmotiv des γ-Tubulins hinsichtlich einer Konservierung innerhalb des Pflanzenreiches untersucht. Die beiden Bereiche sind bei den grünen Landpflanzen stark konserviert. Sie divergieren stark zu den einzelligen Grünalgen Chlamydomonas reinhardtii und Chlorella spec. Es wurden daher in der bestehenden phylogentischen Lücke weitere Organismen hinsichtlich des γ-A und γ-B Peptidmotivs untersucht. Auswahlkriterien der Organismen waren Ein-/Mehrzelligkeit, Besitz/Abwesenheit von Centriolen und Besitz/Abwesenheit von Geißeln. Des weiteren wurde mit verschiedenen γ-Tubulin-Konstrukten um das γ-A- und γ-B-Peptidmotiv, gewonnen aus Nicotiana tabacum (BY2) mittels Y2H-System nach Interaktionspartnern gesucht. Bei den Sequenzuntersuchungen des γ-A- und γ-B-Peptidmotivs konnte festgestellt werden, dass die Konservierung innerhalb der Streptophytenlinie erfolgt. Interessant erweist sich die Tatsache, dass dieses Motiv bei den Jochalgen, welche ebenfalls den Streptophyten angehören, nur im γ-A-Peptidmotiv auftritt. Es besteht die Möglichkeit, dass die beiden potentiellen Interaktionspartner verschiedene Proteine als Interaktions-partner besitzen. Durch eine Anwendung eines auf dem GAL4-Protein basierenden Y2H-Systems mit vier unterschiedlichen Konstrukten des γ-Tubulin-A/B-Peptidbereichs als Köder-konstrukt und einer cDNA-Bibliothek als Beutekonstrukt, wurden diverse Sequenzen identifiziert. Identifiziert wurden das Poly(A)-Bindeprotein, Glycerin-aldehyd-3-phosphatdehydrogenase, die S-adenosyl-L-methionine-Synthetase, diverse Proteasom-Untereinheiten, eine sekretorische Peroxidase, eine Ascorbat-Peroxidase, die NtPOX1-Peroxidase und verschiedene Peroxidasen aus Nicotiana tabacum, Sequenzen des Chloroplastengenoms, ein Myosin-ähnliches Protein und eine Sequenz auf dem 5. Chromosom des Medicago truncatula-Klons mth2-16f8 und diverse humane Sequenzen der Proteine DKFZp68 und DKFZp77. Die Ergebnisse weisen auf eine komplexe Funktionsweise der unterschiedlichen Komponenten des pflanzlichen Cytoskeletts und des γ-Tubulins hin. Zur Aufklärung müsste dies in Zukunft mittels anderer genetischer, biochemischer oder funktioneller Methoden untersucht werden. Hypothesen über Interaktionen der Cytoskelettkomponenten können wahrscheinlich nicht allein durch die Anwendung des Y2H-Systems aufgeklärt werden.

Structure formation as studied by EPR spectroscopy: From simple solutions to nanoparticles

In this thesis, three nitroxide based ionic systems were used to investigate structure and dynamics of their respective solutions in mixed solvents by means of electron paramagnetic resonance (EPR) and electron nuclear double resonance (ENDOR) spectroscopy at X- and W-band (9.5 and 94.5 GHz, respectively). rnFirst, the solvation of the inorganic radical Fremy’s salt (K2ON(SO3)2) in isotope substituted binary solvent mixtures (methanol/water) was investigated by means of high-field (W-band) pulse ENDOR spectroscopy and molecular dynamics (MD) simulations. From the analysis of orientation-selective 1H and 2H ENDOR spectra the principal components of the hyperfine coupling (hfc) tensor for chemically different protons (alcoholic methyl vs. exchangeable protons) were obtained. The methyl protons of the organic solvent approach with a mean distance of 3.5 Å perpendicular to the approximate plane spanned by ON(S)2 of the probe molecule. Exchangeable protons were found to be distributed isotropically, approaching closest to Fremy’s salt from the hydrogen-bonded network around the sulfonate groups. The distribution of exchangeable and methyl protons as found in MD simulations is in full agreement with the ENDOR results. The solvation was found to be similar for the studied solvent ratios between 1:2.3 and 2.3:1 and dominated by an interplay of H-bond (electrostatic) interactions and steric considerations with the NO group merely involved into H-bonds.rnFurther, the conformation of spin labeled poly(diallyldimethylammonium chloride) (PDADMAC) solutions in aqueous alcohol (methanol, ethanol, n-propanol, ethylene glycol, glycerol) mixtures in dependence of divalent sodium sulfate was investigated with double electron-electron resonance (DEER) spectroscopy. The DEER data was analyzed using the worm-like chain model which suggests that in organic-water solvent mixtures the polymer backbones are preferentially solvated by the organic solvent. We found a less serve impact on conformational changes due to salt than usually predicted in polyelectrolyte theory which stresses the importance of a delicate balance of hydrophobic and electrostatic interactions, in particular in the presence of organic solvents.rnFinally, the structure and dynamics of miniemulsions and polymerdispersions prepared with anionic surfactants, that were partially replaced by a spin labeled fatty acid in presence and absence of a lanthanide beta-diketonate complex was characterized by CW EPR spectroscopy. Such miniemulsions form multilayers with the surfactant head group bound to the lanthanide ion. Beta-diketonates were formerly used as NMR shift reagents and nowadays find application as luminescent materials in OLEDs and LCDs and as contrast agent in MRT. The embedding of the complex into a polymer matrix results in an easy processable material. It was found that the structure formation takes place in miniemulsion and is preserved during polymerization. For surfactants with carboxyl-head group a higher order of the alkyl chains and less lateral diffusion is found than for sulfat-head groups, suggesting a more uniform and stronger coordination to the metal ion. The stability of these bilayers depends on the temperature and the used surfactant which should be considered for the used polymerization temperature if a maximum output of the structured regions is wished.

Leaf level VOC emissions of single plants from Amazonian and Mediterranean ecosystems: Ontogeny and flooding as stress factor for VOC emissions

Die Vegetation ist die wichtigste Quelle von organischen flüchtigen Verbindungen (auf Englisch volatile organic compounds,VOCs), die einen bemerkenswerten Einfluss auf der Chemie und Physik der Atmosphäre haben. VOCs beeinflussen die oxidative Kapazität der Atmosphäre und tragen zu der Bildung und zum Wachstum von sekundären organischen Aerosolen bei, welche einerseits eine Streuung und Reflektierung der Energie verursachen und andererseits sich an der Bildung und Entwicklung von Wolken beteiligen. Ziel dieser Arbeit war die Beschreibung und der Vergleich von VOC Emissionen aus Pflanzen aus zwei verschiedenen Ökosystemen: Mediterranes Ökosystem und Tropisches Ökosystem. Für diese Aufgabe wurden gewöhnliche Pflanzen von beiden Ökosystemen untersucht. Siebzehn Pflanzenspezies aus der Mittelmeergebiet, welches bekannt ist für seine Vielfalt an VOC emittierenden Pflanzen, wurden in die Untersuchungen einbezogen. Im Gegensatz zum mediterranen Ökosystem sind nur wenig Information verfügbar über VOC Emissionen aus Blättern tropischer Baumspezies. Vor diesem Hintergrund wurden sechsundzwanzig Baumspezies aus verschiedenen Ökotypen des Amazonasbeckens (Terra firme, Várzea und Igapó) wurden auf VOC Emissionen auf Blattebene mit einem Küvetten-System untersucht. Analysen von flüchtigen organischen Verbindungen wurden online mit PTR-MS und offline mittels Sammlung auf entsprechenden Adsorbern (Kartuschen) und nachfolgender GC-FID Analyse untersucht. Die höchsten Emissionen wurden für Isoprene beobachtete, gefolgt durch Monoterpene, Methanol und Aceton. Die meisten Mittelmeer Spezies emittierten eine hohe Vielfalt an Monoterpenspezies, hingegen zeigten nur fünf tropische Pflanzenspezies eine Monoterpene mit einen sehr konservativen Emissionsprofil (α-Pinen>Limonen>Sabinen >ß-Pinen). Mittelmeerpflanzen zeigten zusätzlich Emissionen von Sesquiterpenen, während bei der Pflanzen des Amazonas Beckens keine Sesquiterpenemissionen gefunden wurden. Dieser letzte Befund könnte aber auch durch eine niedrigere Sensitivität des Messsystems während der Arbeiten im Amazonasgebiet erklärt werden. Zusätzlich zu den Isoprenoidemissionen waren Methanolemissionen als Indikator für Wachtumsvorgänge sehr verbreitet in den meisten Pflanzenspezies aus tropischen und mediterranen Gebieten. Einige Pflanzenspezies beider Ökosystemen zeigten Acetonemissionen. rnrnVOC Emissionen werde durch eine große Vielfalt an biotischen und abiotischen Faktoren wie Lichtintensität, Temperatur, CO2 und Trockenheit beeinflusst. Ein anderer, öfter übersehener Faktor, der aber sehr wichtig ist für das Amazonas Becken, ist die regelmäßige Überflutung. In dieser Untersuchung wir fanden heraus, dass am Anfang einer Wurzelanoxie, die durch die Überflutung verursacht wurde, Ethanol und Acetaldehyd emittiert werden können, vor allem in Pflanzenspezies, die schlechter an eine unzureichende Sauerstoffversorgung bei Flutung adaptiert sind, wie z.B. Vatairea guianensis. Die Spezies Hevea spruceana, welche besser an Überflutung adaptiert ist, könnte möglicherweise der gebildete Ethanol sofort remetabolisieren ohne es zu emittieren. Nach einer langen Periode einer Überflutung konnte allerdings keine Emission mehr beobachtet werden, was auf eine vollständige Adaptation mit zunehmender Dauer schließen lässt. Als Reaktion auf den ausgelösten Stress können Isoprenoidemissionen ebenfalls kurzfristig nach einigen Tage an Überflutung zunehmen, fallen dann aber dann nach einer langen Periode zusammen mit der Photosynthese, Transpiration und stomatäre Leitfähigkeit deutlich ab.rnrnPflanzen Ontogenese ist anscheinend von Bedeutung für die Qualität und Quantität von VOC Emissionen. Aus diesem Grund wurden junge und erwachsene Blätter einiger gut charakterisierten Pflanzen Spezies aus dem Mittelmeerraum auf VOC Emissionen untersucht. Standard Emissionsfaktoren von Isopren waren niedriger in jungen Blättern als in erwachsene Blätter. Hingegen wurden höhere Monoterpen- und Sesquiterpenemissionen in jungen Blätter einiger Pflanzenspezies gefunden. Dieser Befund deutet auf eine potentielle Rolle dieser VOCs als Abwehrkomponenten gegen Pflanzenfresser oder Pathogene bei jungen Blätter hin. In einigen Fällen variierte auch die Zusammensetzung der Monoterpen- und Sesquiterpenspezies bei jungen und erwachsenen Blättern. Methanolemissionen waren, wie erwartet, höher in jungen Blättern als in ausgewachsenen Blättern, was mit der Demethylierung von Pectin bei der Zellwandreifung erklärt werden kann. Diese Befunde zu Änderungen der Emissionskapazität der Vegetation können für zukünftige Modellierungen herangezogen werden. rn

Studio elettrofisiologico di modificazioni a lungo termine della forza della trasmissione sinaptica nel sistema nervoso centrale

Il nucleo accumbens (NAc), il maggior componente del sistema mesocorticolimbico, è coinvolto nella mediazione delle proprietà di rinforzo e nella dipendenza da diverse sostanze d’abuso. Le sinapsi glutammatergiche del NAc possono esprimere plasticità, tra cui una forma di depressione a lungo termine (LTD) dipendente dagli endocannabinoidi (eCB). Recenti studi hanno dimostrato un’interazione tra le vie di segnalazione del sistema eCB e quelle di altri sistemi recettoriali, compreso quello serotoninergico (5-HT); la vasta colocalizzazione di recettori serotoninergici e CB1 nel NAc suggerisce la possibilità di un’interazione tra questi due sistemi. In questo studio abbiamo riscontrato che una stimolazione a 4 Hz per 20 minuti (LFS-4Hz) delle afferenze glutammatergiche in fettine cerebrali di ratto, induce una nuova forma di eCB-LTD nel core del NAc, che richiede l’attivazione dei recettori CB1 e 5-HT2 e l’apertura dei canali del Ca2+ voltaggio-dipendenti di tipo L. Inoltre abbiamo valutato che l’applicazione esogena di 5-HT (5 M, 20 min) induce una LTD analoga (5-HT-LTD) a livello delle stesse sinapsi, che richiede l’attivazione dei medesimi recettori e l’apertura degli stessi canali del Ca2+; LFS-4Hz-LTD e 5-HT-LTD sono reciprocamente saturanti. Questi risultati suggeriscono che la LFS-4Hz induce il rilascio di 5-HT, che si lega ai recettori 5-HT2 a livello postsinaptico incrementando l’influsso di Ca2+ attraverso i canali voltaggio-dipendenti di tipo L e la produzione e il rilascio di 2-arachidonoilglicerolo; l’eCB viaggia a ritroso e si lega al recettore CB1 a livello presinaptico, causando una diminuzione duratura del rilascio di glutammato, che risulta in una LTD. Queste osservazioni possono essere utili per comprendere i meccanismi neurofisiologici che sono alla base della dipendenza da sostanze d’abuso, della depressione maggiore e di altre malattie psichiatriche caratterizzate dalla disfunzione della neurotrasmissione di 5-HT nel NAc.