Low-fidelity bench models for basic surgical skills training during undergraduate medical education

It is remarkable the reduction in the number of medical students choosing general surgery as a career. In this context, new possibilities in the field of surgical education should be developed to combat this lack of interest. In this study, a program of surgical training based on learning with models of low-fidelity bench is designed as a complementary alternative to the various methodologies in the teaching of basic surgical skills during medical education, and to develop personal interests in career choice.

Basic skills for outpatient surgery in medical graduation

Medical students must have domain of basic surgery skills before starting more advanced stages of surgical learning. The authors present a practical and reproducible system of operative techniques circuit, idealized and often applied to the fourth year medical students of a private educational institution. This method has enabled accurate assessment of students' skills, improving their performance and preparing them for more advanced stages of the surgical learning.

Fundamentals of heat transfer

Following over 170+ pages and additional appendixes are formed based on content of Course: Fundamentals of Heat Transfer. Mainly this summarizes relevant parts on Book of Fundamentals of Heat and Mass Transfer (Incropera), but also other references introducing the same concepts are included. Student’s point of view has been consideredwith following highlights: (1) Relevant topics are presented in a nutshell to provide fast digestion of principles of heat transfer. (2) Appendixes include terminology dictionary. (3) Totally 22 illustrating examples are connecting theory to practical applications and quantifying heat transfer to understandable forms as: temperatures, heat transfer rates, heat fluxes, resistances and etc. (4) Most important Learning outcomes are presented for each topic separately. The Book, Fundamentals of Heat and Mass Transfer (Incropera), is certainly recommended for those going beyond basic knowledge of heat transfer. Lecture Notes consists of four primary content-wise objectives: (1) Give understanding to physical mechanisms of heat transfer, (2)Present basic concepts and terminology relevant for conduction, convection and radiation (3) Introduce thermal performance analysis methods for steady state and transient conduction systems. (4) Provide fast-to-digest phenomenological understanding required for basic design of thermal models

Ulkomaalaisen yrityksen verkostosuhteet Venäjällä

Tutkimuksen tavoitteena on konkreettisen yritysverkoston avulla selvittää, minkälaisia ovat ulkomaalaisen yrityksen potentiaaliset kumppanit ja yritysten väliset suhteet Venäjällä. Toisena tavoitteena on kuvata käytännön työelämään sopivalla menetelmällä riittävän kokonaisvaltaisesti yritysverkoston kumppanit sekä kumppaneiden ja kärkiyrityksen väliset suhteet. Samalla tarkastellaan yritysten välisten suhteiden riskejä. Selvitysmenetelmällä pyritään nopeuteen ja ketteryyteen ja sen tavoitteena on lisätä ulkomaisen johdon käsitystä yritysverkostosta johdon päätöksentekoa varten. Tutkimus jakaantuu teoria tarkasteluun ja yhden Venäjällä toimivan ulkomaisen yrityksen osto-osaston verkostoa selvittävään empiiriseen osaan. Teoriatarkastelussa selvitetään erilaisia lähestymistapoja ja laajempia viitekehyksiä yritysverkostojen tutkimukseen. Teoriatarkastelun perusteella valittiin viitekehykset yrityskumppaneiden ja yritysten välisen suhteen sekä riskien arviointiin. Empiirisen osan tutkimus toteutettiin haastattelukyselytutkimuksena perustuen näihin viitekehyksiin. Yrityskumppaneita ja yritysten välisiä suhteita tarkastellaan tilastollisin menetelmin ja riskejä arvioidaan laadullisella tutkimusotteella. Tutkimustulokset vastaavat monelta osin liiketoimintakulttuurista ja –ympäristöstä saatua kokemukseen ja tutkimustietoon perustuvaa käsitystä. Verkostoitumisen kulmakivet ovat hyvin toimivat ja määritellyt vaihdannan liiketoiminta- ja tukiprosessit, hyvin tunnetut kumppanit ja tälle perustalle rakennetut sosiaaliset suhteet sekä liiketoimintaympäristöön ja –kulttuuriin soveltuvat yhteistyökompetenssit. Tutkitun yritysverkoston yhteistyösuhteet voidaan jakaa hierarkkiseen organisaatiokumppanuuteen, toimittajakumppanuuteen, luottamukseen perustuvaan markkinaehtoiseen suhteeseen ja opportunistiseen markkinasuhteeseen. Hyviä yhteistyökumppaneita ja –suhteita löytyy taustaltaan erilaisista toimittajista. Tutkimuksessa käytetyt viitekehykset toimivat hyvin erityisesti yrityskumppanin arvioinnissa. Yritysten välisen suhteen arviointiin käytetyn viitekehyksen ongelmat liittyivät lähinnä erilaiseen liiketoimintakulttuuriin ja käsitykseen yritysten välisestä strategisesta suhteesta. Riskit liittyivät toimitussuhteeseen useammin kuin omaan organisaatioon tai toimittajaan.

Simulointi- ja ohjausjärjestelmän kehitys siltanosturiavusteiseen automaattivarastoon

Diplomityö tehtiin Konecranes Oyj:lle, joka on nostureita valmistava ja niille kunnossapitopalveluita tarjoava suomalainen pörssiyhtiö. Työn kuluessa suunniteltiin ja toteutettiin siltanosturiavusteisiin automaattivarastoihin soveltuva simulointiohjelmisto ja varastonohjausjärjestelmä. Työssä keskityttiin pääsääntöisesti paperirullavarastoihin, mutta suunnitteluvaiheessa otettiin huomioon myös muut Konecranesin tarjontaan kuuluvat automaattivarastotyypit kuten vaakarulla ja kontti. Simulointiohjelmistolla mallinnetaan automaattivarastossa tapahtuvia liikkeitä. Käyttäjä pystyy näkemään nostureiden ja muiden varastossa olevien komponenttien liikkeet 3D- muotoisena simulaattorin käyttöliittymästä. Simulaattorin tavoitteena on helpottaa automaattivaraston suunnittelua ja nopeuttaa sen käyttöönottoa, sekä toimia myös vakuuttavana myyntityökaluna asiakaskontakteissa. Varastonohjausjärjestelmä tekee päätökset varaston tapahtumista ja ohjaa mm. nostureiden toimintaa. Diplomityön päämääränä oli perehtyä tarkasti nykyisen varastonohjausjärjestelmän toimintaan, kehittää uusi ratkaisumalli puutteiden sekä toiveiden perusteella ja lopulta osoittaa ratkaisumallin toimivuus ohjelmoimalla esittelyversio simulaattorista ja varastonohjausjärjestelmästä. Samaa varastonohjausjärjestelmää on määrä käyttää simulaattorissa ja tulevaisuudessa todellisen varaston ohjaamisessa. Asetetuista vaatimuksista johtuen järjestelmästä suunniteltiin mahdollisimman mukautuva. Työn lopputuloksena saatiin perusominaisuudet kattava 3D-simulaattori ja siihen liitetty varastonohjausjärjestelmä. Toteutuksen avulla oli mahdollista osoittaa ratkaisumallin toimivuus sekä esitellä ideaa laajamittaisemmin. Diplomityön kuluessa saatiin nykyisestä järjestelmästä kattavat tiedot ja pystyttiin määräämään suunta, kuinka kehitystyötä jatketaan.

Interference of age and repetition of the same noxious stimulus on hyperalgesia

Pain in animals has been recognized for less than one century. Several authors confirm that animals are capable to process, register and modulate nociceptive stimuli in a very similar way to human kind and there are several evidences registering the impact of pain sensation over vital systems interfering on disease outcome. Nevertheless, despite some evidences that animals, as human beings, can store information from past painful experiences less is known about how this so called pain memory works. The aims of this study were: to evaluate if the response to a painful stimuli differs during different stages of life and if repetition of a same acute stimuli in the same animal interferes with expression of hyperalgesia. Thus, 60 rats were selected and arranged in 3 equal groups: 3 months, 6 months, and 9 months of age. All animals were injected 5% formalin solution in the plantar face of hind paw under volatile general anesthesia. Von Frey filaments were applied at 1h, 24h and 48h after sensitization. Injection was repeated twice with a 30-day interval, each time in a different hind paw. Results showed that younger rats express lower hyperalgesia thresholds in the first stimulation compared to elder animals and that repetition of same stimulus diminishes hyperalgesia thresholds when it begins during infant period and augments hyperalgesia thresholds when it begins during elder ages.

Situational awareness concept in a multinational collaboration environment : challenges in the information sharing framework

Technological capabilities are built to support different types of collaboration, and this gives the justification to widely observe, how activity environments are influenced by technology. Technology as an enabler can be addressed from different perspectives, other than merely technological. Dynamic, evolving environment is at the same time interesting but also challenging. As a multinational collaboration environment, the maritime surveillance is an good example of time critical and evolving environment, where technological solutions enable new ways of collaboration. Justification for the inspiration to use maritime environment as the baseline for understanding the challenges in creating and maintaining adequate level of situational awareness, derives from the complexity of the collaboration and information sharing environment elements, needed to be taken into account, when analyzing criticalities related to decision making. Situational awareness is an important element supporting decision making, and challenges related to it can also be observed in the maritime environment. This dissertation describes the structures and factors involved in this complex setting, found from the case studies that should be taken into account when trying to understand, how these elements affect the activities. This dissertation focuses on the gray area that is between a life threatening situation and normal everyday activities. From the multinational experimentation series case studies, MNE5 and MNE6 it was possible to observe situations that were not life threatening for the participants themselves, but not also basic every day activities. These case studies provided a unique possibility to see situations, where gaining of situational awareness and decision making are challenged with time critical crisis situations. Unfortunately organizations do not normally take the benefit from the everyday work to prepare themselves for possible emerging crisis situations. This dissertation focuses on creating a conceptual model and a concept that supports organizations – also outside the maritime community – to improve their ability to support gaining of situational awareness from the individual training level, all the way to changes in organizational structures in aiming for better support for decision making from the individual level to the highest decision making level. Quick changes and unpredictability are reality in organizations and organizations do not have the possibility to control all the factors that affect their functioning. Since we cannot be prepared for everything, and predict every crisis, individual activities inside teams and as a part of organizations, need to be supported with guidance, tools and training in order to support acting in challenging situations. In fact the ideology of the conceptual model created, lies especially in the aim of not controlling everything in beforehand, but supporting organizations with concrete procedures to help individuals to react in different, unpredictable situations, instead of focusing on traditional risk prevention and management. Technological capabilities are not automatically solutions for functional challenges; this is why it is justified to broaden the problem area observation from the technological perspective. This dissertation demonstrates that it is possible to support collaboration in a multinational environment with technological solutions, but it requires the recognition of technological limitations and accepting the possible restrictions related to technological innovations. Technology should not be considered value per se, the value of technology should be defined according to the support of activities, including strategic and operational environment evaluation, identification of organizational elements, and taking into account also the social factors and their challenges. Then we are one step closer to providing technological solutions that support the actual activities by taking into account the variables of the activity environment in question. The multidisciplinary view to approach the information sharing and collaboration framework, is derived especially from the complexity of decision making and building of situational awareness, since they are not build or created in vacuity, but in the organizational framework by the people doing it with the technological capabilities, enabled by the organizational structures. Introduced case studies were related to maritime environment, but according to the research results, it is valid to argue, that based on the lessons learned it is possible to create and further develop conceptual model and to create a general concept to support a wider range of organizations in their attempt to gain better level of situational awareness (SA) and to support decision making. To proof the versatile usage of the developed concept, I have introduced the case study findings to the health care environment and reflected the identified elements from the trauma center to the created concept. The main contribution to complete this adventure is the presented situational awareness concept created in the respect to NATO concept structure. This has been done to tackle the challenge of collaboration by focusing on situational awareness in the information sharing context by providing a theoretical ground and understanding, of how these issues should be approached, and how these elements can be generalized and used to support activities in other environments as well. This dissertation research has been a several year evolving process reflecting and affecting presented case studies and this learning experience from the case studies has also affected the goals and research questions of this dissertation. This venture has been written from a retro perspective according to ideology of process modeling and design rationale to present to the reader how this entire journey took place and what where the critical milestones that affected the end result, conceptual model. Support in a challenging information sharing framework can be provided with the right type of combination of tools, procedures and individual effort. This dissertation will provide insights to those with a new approach to war technology for the organizations to gain a better level of awareness and to improve the capabilities in decision making. This dissertation will present, from the war technology starting point, a new approach and possibility for the organizations to create a better level of awareness and support for decision making with the right combination of tools, procedures and individual effort.

The seasonal and ovarian status effects on in vitro production of domestic cat embryos between Equator and Tropic of Capricorn

From the Tropic of Capricorn to Equator, the seasonality of domestic cat is known to be absent, i.e., these animals are considered non-seasonal breeders at these regions. We hypothesized that this particularity might have some influence on in vitro embryo production. The aim of this experiment was to determine the percentage of cleavage and morulae and blastocyst formation produced from oocytes recovered from queen ovaries of three distinct status - follicular, luteal or inactive - during two different reproductive seasons experienced by cats in southeast of Brazil (22°53'09" S and 48°26'42" W) - non breeding season (NBS), comprehending January to March; and breeding season (BS), August to October. Thirty queens were neutered. Ovaries were classified according to their status and were sliced in PBS for cumulus oocyte complex (COC) releasing. Grade I COC were washed three times in H-MEM supplemented with BSA, glutamine, sodium pyruvate, cysteine, streptomycin and penicillin. Oocytes were incubated in groups of 20-30 in 400µL of DMEM supplemented with FSH, LH, estradiol, IGF-I and basic fibroblast growth factor under mineral oil for 30 or 36 hours at 38°C in humidified environment of 5% de O2, 5% CO2 and 90% N2. COC were fertilized in Ham's F-10 medium supplemented with BSA, cysteine, pyruvate and streptomycin/penicillin (culture medium) with fresh semen selected through swim up technique. Eighteen hours later, the presumptive zygotes were denuded, the percentage of cleavage was determined and every 10 zygotes were transferred to 100mL drops of culture medium for culture during three days. After 72 hours of culture the percentage of morulae formation was evaluated and these structures were transferred to drops of the same culture medium. At the eighth day of culture blastocyst formation was analyzed. During NBS, from a total of 272 (inactive), 162 (luteal) and 134 (follicular) fertilized oocytes, the percentage of cleaved zygotes, morulae and blastocysts derived from inactive ovaries were 24.63, 16.54 and 8.09 respectively; for those derived from luteal ovaries, the percentage was 21.6, 12.96 and 8.64, and for those from follicular ovaries, they were 24.62, 16.41 and 8.21. Considering BS, from a total of 102 (inactive), 198 (luteal) and 86 (follicular) fertilized oocytes, the relative frequency (%) of cleaved zygotes, morulae and blastocysts derived from inactive ovaries were 64.7, 41.17 and 23.53 respectively; for those derived from luteal ovaries, the percentage was 64.14, 40.41 and 23.73, and for those from follicular ovaries, they were 63.95, 39.54 and 24.41. The results of this experiment demonstrate that no statistically significant difference (P<0.05) was verified in the frequency of cleaved embryos and morulae and blastocyst formation when comparing the three ovarian conditions in the same season. However the breeding season presented better results considering cleavage and morulae and blastocyst formation.

Same- and Other-Sex Victimization : Risk Factors, Consequences, and Protection by Peers

Bullying can be viewed as goal-oriented behavior in the strive for dominance and prestige in the peer group (Salmivalli, 2010). To ensure the effectiveness of their power demonstrations, bullies often choose targets from among their vulnerable peers (Salmivalli, 2010; Veenstra et al., 2007). A large number of studies have also shown that victimization has severe consequences for the victims’ psychosocial adjustment (Reijntjes, Kamphuis, Prinzie, & Telch, 2010; Ttofi, Farrington, Lösel, & Loeber, 2011). In this thesis I investigate – based on three empirical studies – whether similar dynamics on the risk factors and consequences apply to same- and other-sex victimization. In the empirical studies, we used the data from the randomized control trial of the KiVa antibullying program for the elementary school grades 4–6 (2007–2008), and for the middle school grades 7–9 (2008–2009). We measured same- and other-sex victimization, and victims’ defending relationships by dyadic questions: “By which classmates are you victimized?” and “By which classmates are you supported, comforted, or defended?” In addition, we used self-reports and peer reports to measure adjustment and social status. The findings imply that other-sex victimization may be challenging for antibullying work. First, although targets of bullying seemed to be selected from among vulnerable peers for the most part, perceived popularity increased the risks of other-sex victimization. Popularity of these victims may falsely lead to an impression that the victims are doing well. Second, the consequences considering victims’ later psychosocial adjustment were alarming concerning girls bullied by boys. Thus, despite the fact that the targets may be perceived as popular, other-sex victimization can have even more severe consequences than same-sex victimization. Third, we found that defending relationships were mostly same-sex relationships, and consequently, we may ask whether defending is effective against other-sex bullies. Finally, the KiVa antibullying program was less effective against other-sex victimization in the adolescent sample. The findings altogether emphasize the importance of taking into account the sex composition of the bully-victim dyad, both considering future research on bullying and in the antibullying work with children and adolescents.

A Design Methodology for the Compensation of Positioning Deviation in Gantry Manipulators

This work presents recent results concerning a design methodology used to estimate the positioning deviation for a gantry (Cartesian) manipulator, related mainly to structural elastic deformation of components during operational conditions. The case-study manipulator is classified as gantry type and its basic dimensions are 1,53m x 0,97m x 1,38m. The dimensions used for the calculation of effective workspace due to end-effector path displacement are: 1m x 0,5m x 0,5m. The manipulator is composed by four basic modules defined as module X, module Y, module Z and terminal arm, where is connected the end-effector. Each module controlled axis performs a linear-parabolic positioning movement. The planning path algorithm has the maximum velocity and the total distance as input parameters for a given task. The acceleration and deceleration times are the same. Denavit-Hartemberg parameterization method is used in the manipulator kinematics model. The gantry manipulator can be modeled as four rigid bodies with three degrees-of-freedom in translational movements, connected as an open kinematics chain. Dynamic analysis were performed considering inertial parameters specification such as component mass, inertia and center of gravity position of each module. These parameters are essential for a correct manipulator dynamic modelling, due to multiple possibilities of motion and manipulation of objects with different masses. The dynamic analysis consists of a mathematical modelling of the static and dynamic interactions among the modules. The computation of the structural deformations uses the finite element method (FEM).

The Finnish Electronic Library - Basic Research Infrastructure

Kristiina Hormia-Poutasen esitys KRE-konferenssissa 2013.

Koulutusinflaatio. Koulutusekspansio ja koulutuksen arvo Suomessa 1970–2008

Sotienjälkeisenä aikana Suomessa jokainen sukupolvi on ollut edellistä korkeammin koulutettu ja kehitys näyttää yhä vain jatkuvan. Kun 1970-luvulla alle kolmanneksella väestöstä oli perusasteen jälkeinen koulutus, nykyään vähintään keskiasteen koulutuksen puuttuminen on lähes yhtä harvinaista. Koulutusinflaatio viittaa koulutuksen arvon laskuun työmarkkinoilla. Koulutuksen arvon inflatoituessa saman tasoisella koulutuksella päädytään yhä alempiin yhteiskunnallisiin asemiin. Väitöskirjassa tarkastellaan koulutuksen arvon muuttumista Suomessa vuosina 1970–2008. Empiirinen osuus muodostuu kolmesta referee-journaaleissa julkaistusta artikkelista. Ensimmäisessä artikkelissa tarkastellaan ylemmän toimihenkilön asemaan päätyneiden osuutta sekä suhteellista tulotasoa eri koulutusasteilla. Toinen artikkeli keskittyy koulutuksen ja huono-osaisuuden väliseen yhteyteen. Kolmannessa artikkelissa tarkastellaan koulutusekspansion ja koulutusinflaation välistä yhteyttä. Kahdessa ensimmäisessä artikkelissa käytetään samaa rekisteripohjaista otosaineistoa.Aineisto koostuu neljästä 4000 henkilön otoksesta, jotka edustavat 30–39-vuotiaita suomalaisia vuosina 1970, 1980, 1990 ja 2000. Kolmannessa artikkelissa käytetään aggregaattidataa vuosilta 1970, 1980, 1985, 1990, 1993, 1995, 2000, 2004, 2005, 2006, 2007 ja 2008. Viimeinen aineisto kattaa 30–39-vuotiaat työlliset suomalaiset mainituilta vuosilta, se ei siis ole otospohjainen. Tulosten perusteella koulutusinflaatio on ollut Suomessa vahvaa, erityisesti alimmalla korkea-asteella ja alemmalla korkeakouluasteella. Hyvinvointipuutteet lisääntyivät vähiten koulutettujen keskuudessa, mutta vähemmän kuin olisi voinut olettaa. Raja, jonka ylittävällä koulutuksella hyvinvointipuutteiden riski laskee huomattavasti, on noussut – perusasteen ja keskiasteen välistä keskiasteen ja alimman korkea-asteen väliin. Koulutusekspansion yhteys koulutusinflaatioon on ollut erittäin vahva, erityisesti alemmalla korkeakouluasteella.

Combinatorics on Words. New Aspects on Avoidability, Defect Effect, Equations and Palindromes

In this thesis we examine four well-known and traditional concepts of combinatorics on words. However the contexts in which these topics are treated are not the traditional ones. More precisely, the question of avoidability is asked, for example, in terms of k-abelian squares. Two words are said to be k-abelian equivalent if they have the same number of occurrences of each factor up to length k. Consequently, k-abelian equivalence can be seen as a sharpening of abelian equivalence. This fairly new concept is discussed broader than the other topics of this thesis. The second main subject concerns the defect property. The defect theorem is a well-known result for words. We will analyze the property, for example, among the sets of 2-dimensional words, i.e., polyominoes composed of labelled unit squares. From the defect effect we move to equations. We will use a special way to define a product operation for words and then solve a few basic equations over constructed partial semigroup. We will also consider the satisfiability question and the compactness property with respect to this kind of equations. The final topic of the thesis deals with palindromes. Some finite words, including all binary words, are uniquely determined up to word isomorphism by the position and length of some of its palindromic factors. The famous Thue-Morse word has the property that for each positive integer n, there exists a factor which cannot be generated by fewer than n palindromes. We prove that in general, every non ultimately periodic word contains a factor which cannot be generated by fewer than 3 palindromes, and we obtain a classification of those binary words each of whose factors are generated by at most 3 palindromes. Surprisingly these words are related to another much studied set of words, Sturmian words.

Towards sustainable Iron- and steelmaking with economic optimization

The iron and steelmaking industry is among the major contributors to the anthropogenic emissions of carbon dioxide in the world. The rising levels of CO2 in the atmosphere and the global concern about the greenhouse effect and climate change have brought about considerable investigations on how to reduce the energy intensity and CO2 emissions of this industrial sector. In this thesis the problem is tackled by mathematical modeling and optimization using three different approaches. The possibility to use biomass in the integrated steel plant, particularly as an auxiliary reductant in the blast furnace, is investigated. By pre-processing the biomass its heating value and carbon content can be increased at the same time as the oxygen content is decreased. As the compression strength of the preprocessed biomass is lower than that of coke, it is not suitable for replacing a major part of the coke in the blast furnace burden. Therefore the biomass is assumed to be injected at the tuyere level of the blast furnace. Carbon capture and storage is, nowadays, mostly associated with power plants but it can also be used to reduce the CO2 emissions of an integrated steel plant. In the case of a blast furnace, the effect of CCS can be further increased by recycling the carbon dioxide stripped top gas back into the process. However, this affects the economy of the integrated steel plant, as the amount of top gases available, e.g., for power and heat production is decreased. High quality raw materials are a prerequisite for smooth blast furnace operation. High quality coal is especially needed to produce coke with sufficient properties to ensure proper gas permeability and smooth burden descent. Lower quality coals as well as natural gas, which some countries have in great volumes, can be utilized with various direct and smelting reduction processes. The DRI produced with a direct reduction process can be utilized as a feed material for blast furnace, basic oxygen furnace or electric arc furnace. The liquid hot metal from a smelting reduction process can in turn be used in basic oxygen furnace or electric arc furnace. The unit sizes and investment costs of an alternative ironmaking process are also lower than those of a blast furnace. In this study, the economy of an integrated steel plant is investigated by simulation and optimization. The studied system consists of linearly described unit processes from coke plant to steel making units, with a more detailed thermodynamical model of the blast furnace. The results from the blast furnace operation with biomass injection revealed the importance of proper pre-processing of the raw biomass as the composition of the biomass as well as the heating value and the yield are all affected by the pyrolysis temperature. As for recycling of CO2 stripped blast furnace top gas, substantial reductions in the emission rates are achieved if the stripped CO2 can be stored. However, the optimal recycling degree together with other operation conditions is heavily dependent on the cost structure of CO2 emissions and stripping/storage. The economical feasibility related to the use of DRI in the blast furnace depends on the price ratio between the DRI pellets and the BF pellets. The high amount of energy needed in the rotary hearth furnace to reduce the iron ore leads to increased CO2 emissions.

Issuant views of hell in contemporary Anglo-American theology

This problem of hell is a specific form of the problem of evil that can be expressed in terms of a set of putatively incompatible statements: 1. An omnipotent God could create a world in which all moral agents freely choose life with God. 2. An omnibenevolent God would not create a world with the foreknowledge that some (perhaps a significant proportion) of God’s creatures would end up in hell. 3. An omniscient God would know which people will end up in hell. 4. Some people will end up forever in hell. Since the late twentieth century, a number of British and North American philosophical theologians, inspired by C.S. Lewis, have developed a new approach to answering the problem of hell. Very little work has been done to systematize this category of perspectives on the duration, quality, purpose and finality of hell. Indeed, there is no consensus among scholars as to what such an approach should be called. In this work, however, I call this perspective issuantism. Starting from the works of a wide range of issuantist scholars, I distill what I believe to be the essence of issuantist perspectives on hell: hell is a state that does not result in universal salvation and is characterized by the insistance that both heaven and hell must issue from the love of God, an affirmation of libertarian human freedom and a rejection of retributive interpretations of hell. These sine qua non characteristics form what I have labeled basic issuantism. I proceed to show that basic issuantism by itself does not provide an adequate answer to the problem of hell. The issuantist scholars themselves, however, recognize this weakness and add a wide range of possible supplements to their basic issuantism. Some of these supplemented versions of issuantism succeed in presenting reasonable answers to the problem of hell. One of the key reasons for the development of issuantist views of hell is a perceived failure on the part of conditionalists, universalists and defenders of hell as eternal conscious torment to give adequate answers to the problem of hell. It is my conclusion, however, that with the addition of some of the same supplements, versions of conditionalism and hell as eternal conscious torment can be advanced that succeed just as well in presenting answers to the problem of hell as those advanced by issuantists, thus rendering some of the issuantist critique of non-issuantist perspectives on hell unfounded.