Assessing the diurnal evolution of surface radiation balance over the western region of Tropical Atlantic Ocean using in situ measurements carried out during the FluTuA balance Project

In this work, the diurnal evolution of the radiation balance components over the tropical Atlantic Ocean is described and analysed. The analysis is based on measurements carried Out on board a Brazilian Navy ship during the observational campaign of the FluTuA Project (`Fluxos Turbulentos sobre o Atlantico`), from 15 to 23 May 2002. The observations indicated that the albedo responds its expected to atmospheric attenuation effects with a diurnal evolution similar to the Fresnel albedo. In general, the observed longwave radiation values agreed better with the estimated values obtained without longwave reflection. In agreement with the literature, the average surface emissivity was around 0.97. The net radiation, estimated from published equations for albedo, atmospheric transmissivity and surface emissivity, agreed with the observations, indicating that these parameters are representative of the radiometric properties of the air-sea interface in the region between Natal (6 degrees S, 35.2 degrees W) and the Sao Pedro and Sao Paulo Archipelago (1 degrees N, 29.3 degrees W). Copyright (C) 2008 Royal Meteorological Society

Software maintenance project delays prediction using Bayesian Networks

Managing software maintenance is rarely a precise task due to uncertainties concerned with resources and services descriptions. Even when a well-established maintenance process is followed, the risk of delaying tasks remains if the new services are not precisely described or when resources change during process execution. Also, the delay of a task at an early process stage may represent a different delay at the end of the process, depending on complexity or services reliability requirements. This paper presents a knowledge-based representation (Bayesian Networks) for maintenance project delays based on specialists experience and a corresponding tool to help in managing software maintenance projects. (c) 2006 Elsevier Ltd. All rights reserved.

A web based decision support system for status assessment in advanced parkinson

The purpose of this work is to develop a web based decision support system, based onfuzzy logic, to assess the motor state of Parkinson patients on their performance in onscreenmotor tests in a test battery on a hand computer. A set of well defined rules, basedon an expert’s knowledge, were made to diagnose the current state of the patient. At theend of a period, an overall score is calculated which represents the overall state of thepatient during the period. Acceptability of the rules is based on the absolute differencebetween patient’s own assessment of his condition and the diagnosed state. Anyinconsistency can be tracked by highlighted as an alert in the system. Graphicalpresentation of data aims at enhanced analysis of patient’s state and performancemonitoring by the clinic staff. In general, the system is beneficial for the clinic staff,patients, project managers and researchers.

Road Sign Recognition based onInvariant Features using SupportVector Machine

Since last two decades researches have been working on developing systems that can assistsdrivers in the best way possible and make driving safe. Computer vision has played a crucialpart in design of these systems. With the introduction of vision techniques variousautonomous and robust real-time traffic automation systems have been designed such asTraffic monitoring, Traffic related parameter estimation and intelligent vehicles. Among theseautomatic detection and recognition of road signs has became an interesting research topic.The system can assist drivers about signs they don’t recognize before passing them.Aim of this research project is to present an Intelligent Road Sign Recognition System basedon state-of-the-art technique, the Support Vector Machine. The project is an extension to thework done at ITS research Platform at Dalarna University [25]. Focus of this research work ison the recognition of road signs under analysis. When classifying an image its location, sizeand orientation in the image plane are its irrelevant features and one way to get rid of thisambiguity is to extract those features which are invariant under the above mentionedtransformation. These invariant features are then used in Support Vector Machine forclassification. Support Vector Machine is a supervised learning machine that solves problemin higher dimension with the help of Kernel functions and is best know for classificationproblems.

ANFIS BASED MODELS FOR ACCESSING QUALITY OF WIKIPEDIA ARTICLES

Wikipedia is a free, web-based, collaborative, multilingual encyclopedia project supported by the non-profit Wikimedia Foundation. Due to the free nature of Wikipedia and allowing open access to everyone to edit articles the quality of articles may be affected. As all people don’t have equal level of knowledge and also different people have different opinions about a topic so there may be difference between the contributions made by different authors. To overcome this situation it is very important to classify the articles so that the articles of good quality can be separated from the poor quality articles and should be removed from the database. The aim of this study is to classify the articles of Wikipedia into two classes class 0 (poor quality) and class 1(good quality) using the Adaptive Neuro Fuzzy Inference System (ANFIS) and data mining techniques. Two ANFIS are built using the Fuzzy Logic Toolbox [1] available in Matlab. The first ANFIS is based on the rules obtained from J48 classifier in WEKA while the other one was built by using the expert’s knowledge. The data used for this research work contains 226 article’s records taken from the German version of Wikipedia. The dataset consists of 19 inputs and one output. The data was preprocessed to remove any similar attributes. The input variables are related to the editors, contributors, length of articles and the lifecycle of articles. In the end analysis of different methods implemented in this research is made to analyze the performance of each classification method used.

Strategies for the use of PIMEX and other video exposure monitoring methods. : Final report from sub-project “implementation strategies” within the HERIVIS project

Video exposure monitoring (VEM) is a group of methods used for occupational hygiene studies. The method is based on a combined use of video recordings with measurements taken with real-time monitoring instruments. A commonly used name for VEM is PIMEX. Since PIMEX initially was invented in the mid 1980’s have the method been implemented and developed in a number of countries. With the aim to give an updated picture of how VEM methods are used and to investigate needs for further development have a number of workshops been organised in Finland, UK, the Netherlands, Germany and Austria. Field studies have also been made with the aim to study to what extent the PIMEX method can improve workers motivation to actively take part in actions aimed at workplace improvements.The results from the workshops illustrates clearly that there is an impressive amount of experiences and ideas for the use of VEM within the network of the groups participating in the workshops. The sharing of these experiences between the groups, as well as dissemination of it to wider groups is, however, limited. The field studies made together with a number of welders indicate that their motivation to take part in workplace improvements is improved after the PIMEX intervention. The results are however not totally conclusive and further studies focusing on motivation are called for.It is recommended that strategies for VEM, for interventions in single workplaces, as well as for exposure categorisation and production of training material are further developed. It is also recommended to conduct a research project with the intention of evaluating the effects of the use of VEM as well as to disseminate knowledge about the potential of VEM to occupational hygiene experts and others who may benefit from its use.

Road Design for Future Maintenance : Life-cycle Cost Analyses for Road Barriers

The cost of a road construction over its service life is a function of design, quality of construction as well as maintenance strategies and operations. An optimal life-cycle cost for a road requires evaluations of the above mentioned components. Unfortunately, road designers often neglect a very important aspect, namely, the possibility to perform future maintenance activities. Focus is mainly directed towards other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This doctoral thesis presents the results of a research project aimed to increase consideration of road maintenance aspects in the planning and design process. The following subgoals were established: Identify the obstacles that prevent adequate consideration of future maintenance during the road planning and design process; and Examine optimisation of life-cycle costs as an approach towards increased efficiency during the road planning and design process. The research project started with a literature review aimed at evaluating the extent to which maintenance aspects are considered during road planning and design as an improvement potential for maintenance efficiency. Efforts made by road authorities to increase efficiency, especially maintenance efficiency, were evaluated. The results indicated that all the evaluated efforts had one thing in common, namely ignorance of the interrelationship between geometrical road design and maintenance as an effective tool to increase maintenance efficiency. Focus has mainly been on improving operating practises and maintenance procedures. This fact might also explain why some efforts to increase maintenance efficiency have been less successful. An investigation was conducted to identify the problems and difficulties, which obstruct due consideration of maintainability during the road planning and design process. A method called “Change Analysis” was used to analyse data collected during interviews with experts in road design and maintenance. The study indicated a complex combination of problems which result in inadequate consideration of maintenance aspects when planning and designing roads. The identified problems were classified into six categories: insufficient consulting, insufficient knowledge, regulations and specifications without consideration of maintenance aspects, insufficient planning and design activities, inadequate organisation and demands from other authorities. Several urgent needs for changes to eliminate these problems were identified. One of the problems identified in the above mentioned study as an obstacle for due consideration of maintenance aspects during road design was the absence of a model for calculating life-cycle costs for roads. Because of this lack of knowledge, the research project focused on implementing a new approach for calculating and analysing life-cycle costs for roads with emphasis on the relationship between road design and road maintainability. Road barriers were chosen as an example. The ambition is to develop this approach to cover other road components at a later stage. A study was conducted to quantify repair rates for barriers and associated repair costs as one of the major maintenance costs for road barriers. A method called “Case Study Research Method” was used to analyse the effect of several factors on barrier repairs costs, such as barrier type, road type, posted speed and seasonal effect. The analyses were based on documented data associated with 1625 repairs conducted in four different geographical regions in Sweden during 2006. A model for calculation of average repair costs per vehicle kilometres was created. Significant differences in the barrier repair costs were found between the studied barrier types. In another study, the injuries associated with road barrier collisions and the corresponding influencing factors were analysed. The analyses in this study were based on documented data from actual barrier collisions between 2005 and 2008 in Sweden. The result was used to calculate the cost for injuries associated with barrier collisions as a part of the socio-economic cost for road barriers. The results showed significant differences in the number of injuries associated with collisions with different barrier types. To calculate and analyse life-cycle costs for road barriers a new approach was developed based on a method called “Activity-based Life-cycle Costing”. By modelling uncertainties, the presented approach gives a possibility to identify and analyse factors crucial for optimising life-cycle costs. The study showed a great potential to increase road maintenance efficiency through road design. It also showed that road components with low investment costs might not be the best choice when including maintenance and socio-economic aspects. The difficulties and problems faced during the collection of data for calculating life-cycle costs for road barriers indicated a great need for improving current data collecting and archiving procedures. The research focused on Swedish road planning and design. However, the conclusions can be applied to other Nordic countries, where weather conditions and road design practices are similar. The general methodological approaches used in this research project may be applied also to other studies.

Travel Report from the first field trip within the SIDA supported project "Mini-grids supplied by renewable energy - improving technical and social feasibility : Including visits to Ihushi Development Center, Tweyambe Secondary School and Mavuno Project in Tanzania. Conducted in April 2011

This report describes the outcome of the first visit to Tanzania, within the project "Mini-grids supplied by renewable energy - improving technical and social feasibility". The trip included visits to three different organizations; Ihushi Development Center (IDC) near Mwanza, TIDESO near Bukoba, and Mavuno Project in Karagwe. At IDC, a brief evaluation of the current power system was done and measuring equipment for long term measurements were installed. At all three locations investigations regarding the current and future electricity demand were conducted and connections to people relevant to the study were established. The report is including as well some technical specifications as some observations regarding organization and management of the technical systems. The trip was including only short visits and therefore only brief introductions to the different organizations, based on observations done by the author. The report is hence describing the author’s understanding of the technical system and social structures after only short visits to each of the organizations, and may differ from observations done at another point in time, over a different time period, or by some other person.This report describes the outcome of the first visit to Tanzania, within the project "Mini-grids supplied by renewable energy - improving technical and social feasibility". The trip included visits to three different organizations; Ihushi Development Center (IDC) near Mwanza, TIDESO near Bukoba, and Mavuno Project in Karagwe. At IDC, a brief evaluation of the current power system was done and measuring equipment for long term measurements were installed. At all three locations investigations regarding the current and future electricity demand were conducted and connections to people relevant to the study were established. The report is including as well some technical specifications as some observations regarding organization and management of the technical systems. The trip was including only short visits and therefore only brief introductions to the different organizations, based on observations done by the author. The report is hence describing the author’s understanding of the technical system and social structures after only short visits to each of the organizations, and may differ from observations done at another point in time, over a different time period, or by some other person.

Passive crosslaminated timber buildings : Final report Cerbof-project no. 76

In this project, Stora Enso’s newly developed building system has been further developed to allow building to the Swedish passive house standard for the Swedish climate. The building system is based on a building framework of CLT (Cross laminated timber) boards. The concept has been tested on a small test building. The experience gained from this test building has also been used for planning a larger building (two storeys with the option of a third storey) with passive house standard with this building system. The main conclusions from the project are:  It is possible to build airtight buildings with this technique without using traditional vapour barriers. Initial measurements show that this can be done without reaching critical humidity levels in the walls and roof, at least where wood fibre insulation is used, as this has a greater capacity for storing and evening out the moisture than mineral wool. However, the test building has so far not been exposed to internal generation of moisture (added moisture from showers, food preparation etc.). This needs to be investigated and this will be done during the winter 2013-14.  A new fixing method for doors and windows has been tested without traditional fibre filling between them and the CLT panel. The door or window is pressed directly on to the CLT panel instead, with an expandable sealing strip between them. This has been proved to be successful.  The air tightness between the CLT panels is achieved with expandable sealing strips between the panels. The position of the sealing strips is important, both for the air tightness itself and to allow rational assembly.  Recurrent air tightness measurements show that the air tightness decreased somewhat during the first six months, but not to such an extent that the passive house criteria were not fulfilled. The reason for the decreased air tightness is not clear, but can be due to small movements in the CLT construction and also to the sealing strips being affected by changing outdoor temperatures.  Long term measurements (at least two years) have to be carried out before more reliable conclusions can be drawn regarding the long term effect of the construction on air tightness and humidity in the walls.  An economic analysis comparing using a concrete frame or the studied CLT frame for a three storey building shows that it is probably more expensive to build with CLT. For buildings higher than three floors, the CLT frame has economic advantages, mainly because of the shorter building time compared to using concrete for the frame. In this analysis, no considerations have been taken to differences in the influence on the environment or the global climate between the two construction methods.

Talangfabriken : Om organisation av kunskap och kreativitet i skivindustrin

The purpose of this dissertation is to describe, explain and understand how record companies identify and develop new music and new talent. The analysis is carried out on three levels: individual, organizational and sector level. In a record company, this task formally goes to A&R (Artist and Repertoire). This dissertation takes its point of departure in how the capacity for discovering new talent can be understood in terms of knowledge, creativity and competence and how this capacity is affected in the meeting between the record company and the industry. The theoretical framework of the dissertation spans two sociological fields: the sociology of organizations and the sociology of knowledge. While it takes its organizational starting point in the Knowledge Company Approach, it employs a practice-based approach to discuss knowledge. I argue that within the Knowledge company approach there are two contrasting ways to understand knowledge; a distinction is made between knowledge- and creativity-intensive enterprises. The results show that the record industry’s polarized structure can be seen as a result of the Knowledge Company’s typical problems. The A&R’s work is described as including two phases, one intuitive and one analytical. The intuitive assessment is direct, unconscious and without reflection. This ability has been described as "intuition" and "gut feeling". The analytical phase adds analysis and reflection based on knowledge. The results from the interviews with A&R’s reveal the limit of formal and explicit knowledge not only in the choice of music but also in the marketing strategies. The overarching picture is one in which record companies move in a space characterized by tension between dichotomous forces – art and commercialism, creativity and knowledge, culture and economy, chaos and order, but where opposite poles are not mutually exclusive but complementary.

Modular Product Verifications Based on Design for Assembly

The desire to conquer markets through advanced product design and trendy business strategies are still predominant approaches in industry today. In fact, product development has acquired an ever more central role in the strategic planning of companies, and it has extended its influence to R&D funding levels as well. It is not surprising that many national R&D project frameworks within the EU today are dominated by product development topics, leaving production engineering, robotics, and systems on the sidelines. The reasons may be many but, unfortunately, the link between product development and the production processes they cater for are seldom treated in depth. The issue dealt with in this article relates to how product development is applied in order to attain the required production quality levels a company may desire, as well as how one may counter assembly defects and deviations through quantifiable design approaches. It is recognized that product verifications (tests, inspections, etc.) are necessary, but the application of these tactics often result in lead-time extensions and increased costs. Modular architectures improve this by simplifying the verification of the assembled product at module level. Furthermore, since Design for Assembly (DFA) has shown the possibility to identify defective assemblies, it may be possible to detect potential assembly defects already in the product and module design phase. The intention of this paper is to discuss and describe the link between verifications of modular architectures, defects and design for assembly. The paper is based on literature and case studies; tables and diagrams are included with the intention of increasing understanding of the relation between poor designs, defects and product verifications.

Fan Culture as an Informal Learning Environment : Presentation of a NGL project

Fan culture is a subculture that has developed explosively on the internet over the last decades. Fans are creating their own films, translations, fiction, fan art, blogs, role play and also various forms that are all based on familiar popular culture creations like TV-series, bestsellers, anime, manga stories and games. In our project, we analyze two of these subculture genres, fan fiction and scanlation. Amateurs, and sometimes professional writers, create new stories by adapting and developing existing storylines and characters from the original. In this way, a "network" of texts occurs, and writers step into an intertextual dialogue with established writers such as JK Rowling (Harry Potter) and Stephanie Meyer (Twilight). Literary reception and creation then merge into a rich reciprocal creative activity which includes comments and feedback from the participators in the community. The critical attitude of the fans regarding quality and the frustration at waiting for the official translation of manga books led to the development of scanlation, which is an amateur translation of manga distributed on the internet.  Today, young internet users get involved in conceptual discussions of intertextuality and narrative structures through fan activity. In the case of scanlation, the scanlators practice the skills and techniques of translating in an informal environment. This phenomenon of participatory culture has been observed by scholars and it is concluded that they contribute to the development of a student’s literacy and foreign language skills. Furthermore, there is no doubt that the fandom related to Japanese cultural products such as manga, anime and videogames is one of the strong motives for foreign students to start learning Japanese. This is something to take into pedagogical consideration when we develop web-based courses. Fan fiction and fan culture make it ​​possible to have an intensive transcultural dialogue between participators throughout the world and is of great interest when studying the interaction between formal and informal learning that puts the student in focus

PANA V : Evaluation of a Literacy Project

PANA V Evaluation of a Literacy ProjectSUMMARY AND CONCLUSIONSThis evaluation set out to explore the impact of the literacy work carried out through PANA V. It focussed on clarifying effects such as empowerment and poverty reduction in relation to the civil society. Two specific objectives were to evaluate the methodological approach and the didactic materials and to evaluate the sustainability of the project.Although the focus of the evaluation has been PANA V, the project has been evaluated in its context, as one in a series of five projects located in Rwanda ten years after the war and genocide. The conclusion will consider future plans in this field.The evaluator has striven to create a holistic picture of the effects of the project, although the given time for the evaluation was short. Only three weeks were spent in the field study and only ten days in the actual field. Although there were some organisational and logistic problems, as is common when carrying out a study like this in a poor country, many literacy sites were visited and quite many participators were interviewed. The overall impression from the study is overwhelmingly positive. So many people commit themselves in this task of teaching Rwandans reading, writing and numeracy. Despite harsh conditions learners strive to learn and group leaders devote themselves to the task. Many leaders on different levels try their very best to manage their difficult and demanding task. The main objective was to explore the impact of the project on poverty reduction, particularly on empowerment and strategies for everyday life. Women were to be regarded particularly. From the results it is clear that the project has a strong, positive impact both on poverty reduction and empowerment of marginalised groups. Among those who have benefited from the alphabetisation are mainly women. Unfortunately, when it comes to leaders in PANA, who may also be said to have benefited from the project, only a small minority is women. This is something that is recommended that it be reconsidered inside the organisation. As a majority of the targeted learners are women, and as the economic and social situation of women in Rwanda is generally weak, this is a question that I recommend the Pentesostal church and ADEPR to look particularly into. With many women being single breadwinners of their households, it is important that also women get access to positions that may bring benefits of different kind.It is also clear that the project has positive effects for the civil society. In the present situation in Rwanda, during the process of reconciliation and rapid progress, basic education for the poor majority is a democratic issue. In a country with a plethora of internet-cafés in the capital and a small minority that use cars and mobile-telephones to communicate nation-wide, it is of outmost importance that the majority acquires basic education, of which literacy is a central part. To strengthen the civil society in Rwanda literacy is important. One central issue is then that Rwanda develops toward becoming a country where literacy is used for the benefit of the citizens and it is a democratic issue that all citizens get an opportunity to participate. Crucial for this is that strong efforts are put into primary schools nation-wide. Literacy projects for adults, like PANA, may only complement these efforts, but they constitute important and necessary complements. Other relevant ways to promote literacy are campaigns in Radio and TV and through cultural events such as festivals, music and theatre. News papers, magazines and books are natural parts of such campaigns as well as adult education. As stated under the results not much can be said about the didactics in this evaluation. On the whole the methodology and the materials fill their function well and receive a high reputation. As people learn to read and write under very simple conditions, obviously the approach is appropriate. A few suggestions may be given from the study:•Focus groups leaders’ attention on clearness, that they show very clearly what is to be read. Good structuring is probably of great importance for many learners.•Make clear what is tested in the tests and consider the possibility to use a holistic test that would be more congruent with the methodology. The possibility to use only one grade, pass, would enable a more practical test, such as reading a short, relevant text, writing something relevant and solving practical mathematic problems. Avoid tests that demand school knowledge.•Avoid using methaphors such as “fight against illiteracy” and connections between illiteracy/literacy and darkness/light. It is not true that illiteracy causes bad things and that literacy only brings good. •Be prepared that it may be more difficult in the future to achieve the goals as it may be the case that the early learners where the ones who achieved easily. The goal of “literacy in six month” in PANA will probably hold only for some learners but also those who do not manage in six months need literacy skills.A third objective was to secure sustainability. As for sustainability of the project in itself, and of the literacy process, the main conclusion is that there is a good potential. The commitment and devotedness among many involved in PANA proves good. One weakness is individual leaders in ADEPR who do not see this as an important task for the Pentecostal church in Rwanda. Other weaknesses are the unwillingness to mention explicitly the wish, for example among group leaders, to get some kind of incentive and the fear of loosing believers by cooperation with other organisations. A higher degree of transparency in this issue would probably solve some irritations and tensions.As for the sustainability of the literacy skills much may be done to improve. The acquired skills seem to be comparably relevant. The level achieved, and the level tested, may be defined as basic literacy skills, consisting of basic reading, writing and numeracy skills. However, these skills are very restricted and there is a high risk that the skills will decline, which means that there is a high risk that people will forget how to read and write because of lack of exercising. From these conclusions a few suggestions for future development will be given.

Kunskapsöverföring- att leda rätt : Ledarens roll vid kunskapsöverföring i en organisation

I en rapport som Svensk Näringsliv (2010) har utfört beskriver de att företag redan idag och inom en snar framtid står inför den största pensionsavgången någonsin i Svensk historia. 40- talisternas avgång ställer företag inför stora utmaningarna, framförallt att lyckas genomföra en lyckad generationsväxling. De personer som går i pension har under sitt yrkesverksamma liv utvecklat en kunskap som många organisationer vilar på. En stor del av denna kunskap måste överföras för att organisationerna ska kunna fortsätta att vara effektiva på marknaden. Syftet med denna studie var att få en djupare förståelse för ledarskapets betydelse gällande kunskapsöverföring i en organisation, samt bidra med praktiska verktyg till chefer och medarbetare för att undvika att förlora värdefull kunskap vid en generationsväxling. Industriföretaget LEAX har själva identifierat ett problem i att överföra viktig kunskap i och med kommande generationsväxling. Deras önskan var att få hjälp med praktiska verktyg för hur de ska tänka och verka för att mildra kunskapsglappet som kan uppstå. För att undersöka detta och därmed uppfylla denna studies syfte har intervjuer genomförts med fyra produktionsledare, fyra medarbetare som förväntas dela kunskap och tre medarbetare som förväntas ta till sig kunskap. Innan intervjuerna genomfördes läste vi in oss på teori om kunskap, kunskapsöverföring och ledarskap. Eftersom begreppet kunskap har en bred betydelse och kan definieras olika beroende om den är individuell eller organisatorisk, började vi i vårt teoriavsnitt att bena ut detta begrepp. Nonaka och Takeuchi (1995) gör en förenklad bild av kunskap som ett isberg, där den explicita kunskapen benämns som toppen. Väl synlig över ytan på vattnet är den enkel att upptäcka och ta till sig. Under vattnet döljer sig en osynlig kunskap som är svår att upptäcka, så kallas implicit eller tyst kunskap. Denna kunskap utgör en enorm del av isberget och blir därmed viktig att bevara. Dock är denna kunskap svår att överföra då den är osynlig och svår att ta på. För att förstå vad kunskapsöverföring innebär, behöver organisationer identifiera vilken sorts kunskap som behöver överföras för att kunskapsöverföringen ska bli lyckad (Jonsson, 2012). Men även fast organisationer gör detta måste även ledningen förstå att kunskapsöverföring är en strategisk angelägenhet som kan ses som en process som involverar medarbetare. I denna studie har vi undersökt hur ledare kan skapa motivation, engagemang och resurser för medarbetare att vilja medverka och bidra till kunskapsöverföring. För att försöka förstå hur kunskap överförs i en organisation har vi använt oss av Nonaka och Takeuchi, (1995) SECI-modell. Modellen bygger på samspelet mellan den tysta och explicita kunskapen, vilket sker i fyra processer. Dessa processer har vi sedan utvecklat till en egen modell som inkluderar institutionella, organisatoriska och kognitiva faktorer. Utifrån dessa faktorer har vi skapat praktiska förslag på hur ledare tillsammans med medarbetarna kan planera kunskapsöverföring. Dessa praktiska förslag gynnar både individuell- och organisatorisk utveckling, samt bidrar till att mildra kunskapsförlust vid generationsväxlingen. Ett av de praktiska exempel vi utformat är en kompetensprofil, som är ett hjälpmedel för organisationer att identifiera vilken kunskap som medarbetarna besitter, vilket synliggör vilken kunskap det är som kan gå förlorad. Kompetensprofilen tillsammans med vår modell kan appliceras på liknande företag, men även på organisationer som verkar inom andra branscher. Eftersom denna kompetensprofil är utvecklad efter de krav som finns inom aktuell verksamhet, finns det möjlighet att anpassa efter andra verksamheter.

Att främja ett ackomodativt lärande utifrån ettandragogiskt perspektiv : I en offentlig organisation

En upplevelse av att det finns begränsade kunskaper kring vuxna individers väg att lära utgörgrunden för denna undersökning. Utbildningar idag kommer ofta i form av föreläsningarvilket framför allt resulterar i ett assimilativt lärande, det vill säga ett ytligt lärande därindividen saknar förståelse för kunskapen. Pedagogik är ett begrepp som överlag i storutsträckning används när lärande är målet oavsett vem som ska lära sig något. Kursupplägg avpedagogisk karaktär vänder sig främst till barn och kan anses olämplig när vuxna individerska lära sig. Andragogik är begreppet för vuxenlärande, vilken bygger på kunskapen om attvuxna är självstyrande individer och behöver därför själva ta steget till att lära sig något nytt. Iden andragogiska modellen presenteras de förutsättningar som krävs för att en vuxen individska kunna tillägna sig nya kunskaper på en djupare nivå, få en förståelse, denna nivå avlärande kallas för ett ackomodativt lärande.Undersökningens syfte var att studera om de två processledarnas ledarskap och kursupplägggrundas i andragogik för att främja ett ackomodativt lärande i Landstinget Dalarnas Chef ochledarprogram.Undersökningen var en fallstudie där en deduktiv ansats förelåg. En kvalitativ metod i formav observation har använts för insamling av data. Processledarna för Chef ochledarprogrammet har observerats och filmats med filmkamera under en av fyra delar av ettintroduktionsblock. Ledarskap och kursupplägg är två områden som behandlas teoretiskt dåde anses kunna påverka lärandet för vuxna personer såväl kollektivt som individuellt.Processledarna för Landstinget Dalarnas Chef och ledarprogram tog i stor utsträckning hänsyntill de vuxna individernas behov, som kan förstås utifrån den andragogiska modellen. Genomsitt ledarskap och kursupplägg skapade de goda förutsättningar för deltagarnas möjlighet attkunna tillägna sig ett ackomodativt lärande. Processledarnas ledarskap grundar sig i känslor,relationer och med människosynen att alla människor har samma grundläggande behov.Kursupplägget bestod av övningar och dialoger där deltagarna involverades, vilketförespråkas i den andragogiska modellen för att kunna uppnå ett ackomodativt lärande