Petrologia e geoquímica do magmatismo ediacarano Serra do Caramuru, Rio Grande do Norte, NE do Brasil

The Serra do Caramuru and Tapuio stocks, located in the extreme NE of Rio Piranhas-Seridó Domain (RN), are representative of the Ediacaran-Cambrian magmatism, an important magmatic feature of the Brasilian / Panafrican orogeny of the Borborema Province. These bodies are lithologically similar, intrusive in paleoproterozoic gneiss embasement, being separated by a thin belt of mylonitic orthogneiss. The field relations show a magmatic stratigraphy initiated by dioritic facies that coexists with the porphyritic granitic and equigranular granitic I facies, and less frequently with equigranular granitic II facies. These rocks are crosscut by late granitic dykes and sheets with NE-SW / NNE-SSW orientation. The dioritic facies (diorite, quartz diorite, quartz monzodiorites, tonalite and granodiorite) is leucocratic to melanocratic, rich in biotite and hornblende. The granitic facies are hololeucocratic to leucocratic, and have biotite ± hornblende. Petrographic and geochemical (whole rock) data, especially from Serra do Caramuru pluton, suggest fractionation of zircon, apatite, clinopyroxene (in diorites), opaque minerals, titanite, biotite, hornblende, allanite, plagioclase, microcline and garnet (in dykes). The behavior of trace elements such as Zr, La and Yb indicates that the dioritic magma does not constitute the parental magma for the granitic facies. On the other hand, the granitic facies seems to be cogenetic to each other, displaying differentiation trends and very similar rare earth elements (REE) spectra [12.3≤(La/Yb)N≤190.8; Eu/Eu*=0.30-0.68]. Field relationships and REE patterns [6.96≤(La/Yb)N≤277.8; Eu/Eu*=0.18-0.58] demonstrate that the granitic dykes and sheets are not cogenetically related to the Serra do Caramuru magmatism. The dioritic facies is metaluminous (A/CNK = 0.88-0.74) and shoshonitic, whereas the granitic ones are metaluminous to peraluminous (A/CNK = 1.08-0.93) and high potassium calc-alkaline. Dykes and sheets are strictly peraluminous (A/CNK = 1.01-1.04). Binary diagrams relating compatible and incompatible trace elements and microtextures indicate the fractional crystallization as the dominant mechanism of magmatic evolution of the various facies. The Serra do Caramuru and Tapuio stocks have well preserved magmatic fabric, do not show metamorphic minerals and are structurally isotropic, showing crosscutting contact with the ductile fabric of the basement. These observations lead to interpretate a stage of relative tectonic stability, consistent with the orogenic relaxation period of the Brasiliano / Pan-African orogeny. Chemical plots involving oxides and trace elements indicate late to post-collisional emplacement. In this context, the assumed better mechanism to describe the stocks emplacement within an extensional T Riedel joint, with ENE-WSW extensional vector. The U-Pb zircon age of 553 ± 10 Ma allows correlating the Serra do Caramuru magmatism to the group of post-collisional bodies, equigranular high potassium calc-alkaline granites of the NE of Rio Piranhas-Seridó Domain.

Petrologia e geoquímica do magmatismo ediacarano Serra do Caramuru, Rio Grande do Norte, NE do Brasil

The Serra do Caramuru and Tapuio stocks, located in the extreme NE of Rio Piranhas-Seridó Domain (RN), are representative of the Ediacaran-Cambrian magmatism, an important magmatic feature of the Brasilian / Panafrican orogeny of the Borborema Province. These bodies are lithologically similar, intrusive in paleoproterozoic gneiss embasement, being separated by a thin belt of mylonitic orthogneiss. The field relations show a magmatic stratigraphy initiated by dioritic facies that coexists with the porphyritic granitic and equigranular granitic I facies, and less frequently with equigranular granitic II facies. These rocks are crosscut by late granitic dykes and sheets with NE-SW / NNE-SSW orientation. The dioritic facies (diorite, quartz diorite, quartz monzodiorites, tonalite and granodiorite) is leucocratic to melanocratic, rich in biotite and hornblende. The granitic facies are hololeucocratic to leucocratic, and have biotite ± hornblende. Petrographic and geochemical (whole rock) data, especially from Serra do Caramuru pluton, suggest fractionation of zircon, apatite, clinopyroxene (in diorites), opaque minerals, titanite, biotite, hornblende, allanite, plagioclase, microcline and garnet (in dykes). The behavior of trace elements such as Zr, La and Yb indicates that the dioritic magma does not constitute the parental magma for the granitic facies. On the other hand, the granitic facies seems to be cogenetic to each other, displaying differentiation trends and very similar rare earth elements (REE) spectra [12.3≤(La/Yb)N≤190.8; Eu/Eu*=0.30-0.68]. Field relationships and REE patterns [6.96≤(La/Yb)N≤277.8; Eu/Eu*=0.18-0.58] demonstrate that the granitic dykes and sheets are not cogenetically related to the Serra do Caramuru magmatism. The dioritic facies is metaluminous (A/CNK = 0.88-0.74) and shoshonitic, whereas the granitic ones are metaluminous to peraluminous (A/CNK = 1.08-0.93) and high potassium calc-alkaline. Dykes and sheets are strictly peraluminous (A/CNK = 1.01-1.04). Binary diagrams relating compatible and incompatible trace elements and microtextures indicate the fractional crystallization as the dominant mechanism of magmatic evolution of the various facies. The Serra do Caramuru and Tapuio stocks have well preserved magmatic fabric, do not show metamorphic minerals and are structurally isotropic, showing crosscutting contact with the ductile fabric of the basement. These observations lead to interpretate a stage of relative tectonic stability, consistent with the orogenic relaxation period of the Brasiliano / Pan-African orogeny. Chemical plots involving oxides and trace elements indicate late to post-collisional emplacement. In this context, the assumed better mechanism to describe the stocks emplacement within an extensional T Riedel joint, with ENE-WSW extensional vector. The U-Pb zircon age of 553 ± 10 Ma allows correlating the Serra do Caramuru magmatism to the group of post-collisional bodies, equigranular high potassium calc-alkaline granites of the NE of Rio Piranhas-Seridó Domain.

O efeito da adubação foliar na variedade de batata (Solanum tuberosum) de indústria “LADY ROSETTA”

A batata está sujeita a stresses bióticos (doenças, pragas, infestantes) e abióticos (condições climáticas, secura, excesso de água, ou fitotoxicidade provocada por herbicidas, entre outros). Os adubos foliares contendo nutrientes (macro e micronutrientes) poderão contribuir para uma melhor nutrição da planta, para além de exercer uma ação benéfica ao nível do potencial hídrico da folha e sua proteção contra os diversos inimigos bióticos. Instalou-se um ensaio em Marinhais na variedade de batata de indústria Lady Rosetta, para avaliar o efeito da adubação foliar de uma gama de adubos foliares “Humigel”, contendo, entre outros nutrientes, o enxofre e o potássio, numa situação de fitotoxidade causada pela aplicação de um herbicida. O ensaio foi instalado com um dispositivo experimental de parcelas totalmente aleatórias, com 4 repetições. Os tratamentos foram a aplicação de “Humigel” e sem aplicação (testemunha). A produção comercial nas parcelas com “Humigel” foi significativamente mais elevada (48 192 kg/ha) do que nas parcelas testemunha (43 458 kg/ha). Não se registaram diferenças significativas ao nível do número de tubérculos (comercial e total) por planta, nem ao nível dos parâmetros de qualidade (peso específico e teste de fritura).

Manipulação gênica do protozoário Neospora caninum como ferramenta para o estudo das interações parasito-hospedeiro

Neospora caninum is an obligate intracellular parasite classified in the phylum Apicomplexa, characterized by the presence of the apical complex composed by micronemes proteins, rhoptries and dense granules, used by parasite during the adhesion and invasion process of the host cell. This is the mean event in infection pathogenesis generated by N. caninum and other parasites from the phylum Apicomplexa, promoting influence in the parasite biology and the interface between the parasite and its host. Therefore, molecular tools have been developed in order to identify and characterize these possible virulence factors. Thus, the present study sought to establish a specific system of genetic manipulation of N. caninum, searching for the improvement of the genetics manipulation of this parasite. So, we developed genetically depleted N. caninum to Rop9 rhoptry using the pU6-Universal CRISPR-Cas9 plasmid of T. gondii modified by the insertion of Ku80. The Rop9 depleted parasite showed important during initial phase of invasion and replication of the parasite, however it was not characterized as a potential virulence fator for N. caninum. Furthermore, T. gondii proteins were expressed in N. caninum by the use of specific vectors for this parasite, showing an heterologous system for the study of Toxoplasma proteins, due to the fact that Gra15 or Gra24 of type II T. gondii and Rop16 of type I T. gondii were expressed in N. caninum tachyzoites in a stable way and keept its biological phenotype, as already presented the former parasite, that naturaly expresses these proteins. In addition, it was observed that N. caninum induced an inflammasome activation through NLRP3, ASC and Caspase-1. IL-1R/MyD88 demonstrated an indirect pathway in the control of parasite replication. Furthermore, it was observed that this activation is dependent of the potassium efflux and that different strains of N. caninum keep this activation profile. However, T. gondii strains block this activation, making necessary a prior signal in order to active the inflamosome pathway. Type I T. gondii Rop16 was identified as responsible for blocking this activation, in a dependent way to the STAT3 activation. Therefore, the development of molecular tools and their application in N. caninum may prove to be useful to identify and characterize virulent factors involved in the pathogenesis by these two protozoans.

Estudo das alterações hematológicas e urinárias em cães em diferentes estágios de disfunção renal e avaliação do biomarcador cistatina C

Chapter 2 - Cystatin C is a cationic protein is not glycosylated, produced a steady state for all nucleated and present in biological fluids cells being freely filtered by the glomeruli and almost completely catabolized in the proximal tubule, it is a promising early renal dysfunction marker. This study aimed to determine and compare the serum concentration of cystatin C biomarker in 86 dogs. The animals were divided into four groups according to serum creatinine levels: G1 - up. 1.4 mg / dL (23 animals), G2 - 1.5-2.0 mg / dL (16 animals), G3 - 2.1 to 5.0 mg / dL (24 animals) and G4 - above 5.1 mg / dL (23 animals). There was the measurement of the parameters used in the clinical routine of small animals such as urea, urinary gamma glutamyl transferase, proteinuria, alkaline phosphatase, sodium, potassium, chloride, calcium, phosphorus, calcium/phosphorus ratio and cystatin C. There was no statistical difference for urea, proteinuria, phosphorus, calcium/phosphorus, potassium and cystatin C, however, the other showed no statistical difference. Based on the results we can infer that cystatin C was not a good early indicator of kidney disease in dogs. Chapter 3 - This study aimed to determine the hematological and urinalysis elements such as density, proteinuria, cylinders and pH in 86 dogs The animals were divided into four stages according to serum creatinine levels: I - up to 1.4 mg/dL (23 animals), II - 1.5-2.0 mg/dL (16 animals), III from 2.1 to 5.0 mg/dL (24 animals) and IV - above 5.1 mg/dL (23 animals). In stage III, IV there was anemia normocytic normochromic type. Stage II had a leukocytosis frame by neutrophilia with a regenerative left shift and stage III and IV detour degenerative left. The density remained within the reference values all stages. Proteinuria showed statistical significance for the classification 2+ (1.0 g/L), between stage I and II, II and IV. Only the cylinder granular statistical difference in the classification 2+ between stage II and III, and 3+ between stage I and III. The prevailing pH was acid. The haematological values compared to serum creatinine stages showed the changes in hemoglobin and packed cell volume erythrocytes become more pronounced as serum creatinine values rise , this is also the behavior of neutrophils rods and proteinuria.

Desenvolvimento de um sumo de fruta com adição da macroalga Gelidium corneum, recorrendo à tecnologia HPP: caracterização físico-química, microbiológica e sensorial

No setor alimentar, o controlo da qualidade dos produtos e dos processos é uma etapa essencial, uma vez que é por este meio que se avaliam os padrões exigidos, quer a nível de legislação, quer a nível de mercado. O presente trabalho teve, como objetivos principais, o desenvolvimento de um novo produto alimentar com adição de algas, bem como o controlo de qualidade a nível de uma unidade fabril de produção de sumos e polpas naturais, à base de hortofrutícolas. De forma a garantir a qualidade na obtenção de produtos, foi realizado, diariamente, o controlo de entradas dos produtos hortofrutícolas, o acompanhamento de processos nas linhas de produção da fábrica e a análise das amostras de referência. Considerando a tendência e potencial de crescimento apresentados pelo setor das bebidas, nomeadamente dos sumos de fruta naturais, juntamente com a incessante procura por ingredientes naturais ricos em vários nutrientes e com propriedades bioativas, tem-se vindo a registar o lançamento de um número considerável de bebidas inovadoras, onde as macroalgas têm merecido um papel de destaque. Desta forma, procedeu-se à elaboração de dois protótipos, nomeadamente, sumo de framboesa e sumo de espinafres, com a adição do extrato da alga Gelidium corneum, estabilizados através do processo de Hiperpressão a frio, com o intuito de se avaliar o impacto desse extrato nos diferentes parâmetros de qualidade dos sumos. No que respeita aos parâmetros físico-químicos, o pH e teor de sólidos solúveis (TSS) foram avaliados após produção (t0), no tempo intermédio (t15) e no tempo final (t30). A cor foi determinada no t0 e no t30 e os restantes parâmetros, como acidez titulável, quantificação total de polifenóis, capacidade de redução do radical DPPH, teor de proteína bruta, teor de cinzas, teor de minerais e oligoelementos e teor de vitaminas (A, B1, B2 e C) foram avaliados no tempo final (t30). Foram, também, avaliados os parâmetros microbiológicos mais significativos, nomeadamente, microrganismos totais a 30 ˚C, Escherichia coli, Salmonella spp, bolores e leveduras (ao t0, t15 e t30) e realizou-se uma avaliação sensorial ao 29.º dia após produção. Estes sumos apresentaram-se microbiologicamente estáveis, não se tendo verificado crescimento microbiológico durante o período de armazenamento de 30 dias. A análise dos resultados físico-químicos permitiram constatar que a adição do extrato da alga Gelidium corneum aos sumos influenciou as suas características, tendo havido um aumento significativo do pH com a consequente diminuição da acidez titulável e um aumento do teor de sólidos solúveis, em comparação com os sumos controlo. Em relação à avaliação da cor, no caso das amostras de sumos de framboesa, verificou-se que a adição do extrato de algas influenciou o parâmetro a*. No entanto, ambas as amostras permitiram a manutenção deste parâmetro, ao longo do tempo. Quanto ao parâmetro b*, as duas amostras de sumo com algas demonstraram uma evolução mais estável, em relação aos respetivos controlos. No que respeita ao teor em minerais, a adição do extrato da alga demonstrou aumentar os teores de magnésio, sódio, potássio e iodo. Em termos sensoriais, o sumo de framboesa com algas obteve maior aceitação por parte do painel de provadores, podendo-se constatar que o atributo da cor foi o que mostrou maiores variações, entre as duas amostras.

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.

Tipos de adubação para a videira 'BRS - violeta' cultivada em latossolo vermelho no sudoeste do Paraná

The vineyard culture, in the Southwest of Paraná, has faced an evolution in recently years. However, some technical barriers has contained the expression of its full potential. Among which, the lack of scientific and technical support about the fertilization management and the fertility maintenance of production fields, is the most worrying. This fact, allied with the raising on the consumers demand for ecological correct products, are the motivations for the present study, whose main objective was to evaluate the effects of different fertilizer formulations, based on alternative nutrient sources, on grapevine yield and grape fruit quality, aiming at the improvement of those parameters and the maintenance of soil fertility. To achieve this goal, an experiment has been evaluated since 2008, at the experimental area of the Federal Technological University of Paraná, Campus Pato Branco, where ten treatments were being tested, combining or isolating shale derivates from other alternative nutrient sources. Those are the treatments: T1: Gafsa Rock Phosphate (GRP) + K2SO4; T2: GRP + RPB (Rock Powder Bioland®); T3: GRP + K2SO4 + LH (Laying Hen Litter); T4: GRP+ RPB + LH; T5: GRP + K2SO4 + MBR (Matrix Shale 3); T6: GRP + RPB + MBR; T7: GRP + K2SO4 + MBR + LH; T8: GRP + RPB + LH + MBR; T9: TSP (Triple Superphosphate) + Urea + KCl and T10: absolute control. The usage of fertilization, specially the alternative fertilization, improved soil fertility characteristics and also the yield on the last two evaluated harvests. The potassium sulfate improved the potassium availability on soil, while improved yield on the last three harvests. The MBR improved the phosphorus availability, improved post-harvest conservation and improved the yield on the last evaluated harvest.

Queijo minas padrão com reduzido teor de sódio: composição e caracterização sensorial

Sodium is an essential nutrient with important functions in the organism, however, its ingestion in excess may cause various health problems such as arterial hypertension, brain diseases, heart failure and chronic renal failure. In this context, the present study proposes to prepare Minas Padrão cheese with different contents of sodium with the objective of evaluating the effect of the addition of potassium chloride in sensory characteristics and hysicochemical properties, as well as in the proximal composition and in microbiological quality. The cheeses were elaborate in concentrations of 100% of NaCl (C), 80% of NaCl + 20% of KCl (T1), 60% of NaCl + 40% of KCl (T2), 40% of NaCl + 60% of KCl (T3) and 20% of NaCl + 80% of KCl (T4) and stored for 20 days at 10 ºC. The proximal composition and physicochemical was based on the determination of moisture content, fat, protein, ash, chloride, sodium, potassium, titratable acidity and pH of all treatments after 20 days of storage. The microbiological quality of the samples was monitored through the count of Total Coliforms and Escherichia coli, Staphylococcus aureus, Salmonella spp., mold and yeast in the first and fifteenth day of storage. The sensorial characterization was performed by the technique of Free Profile choice. The results showed that the replacement of sodium chloride by potassium in the Minas Padrão cheese in concentration higher than 40% presented significantly higher moisture contents. Cheese with a reduction greater than 60% of sodium obtained significantly effect in the titratable acidity, presenting higher values compared to the other treatments. The cheese with 20% of salt replacement did not differ statistically in relation to the control. When the proportion of substituent was increased, a significant reduction of the sodium content of up to 73% was observed. As the sodium was replaced by potassium in cheese, the potassium content increased significantly, stablishing a reduction of 82% in relation to the control. There was no effect to sodium substitution by potassium in fat, protein, ash and chlorides, as well as the pH values. The microbiological results were in accordance with the current legislation, therefore suitable to be eaten. According to the Free Profile Choice technique it was observed that the control C cheese (100% of NaCl) showed results very close to the other treatments, differing only in flavor attributes. The replacement of sodium by potassium in proportions of 20% contributed to a bitter taste detected by the tasters. Whereas, the appearance, flavor and texture attributes showed no significant differences compared to the Minas Padrão cheese.

Adubação de sistemas: antecipação de adubação nitrogenada para a cultura do milho em integração lavoura-pecuária

Traditionally in no-tillage systems, fertilization is done to the catch crop. In general nutrient cycling in crop systems has not been treated as an important tool in the process of nutrient supplying for plants. The type and the condition in which vegetable residuesis decomposed can affect the efficiency of nutrient cycling.This study assessed the effect of anticipated nitrogen fertilization in crop-livestock systems on cultivated cornproduction, rate ofnutrient release from plant residue, and theN-minerallevels of soil. The study was carried out in the city Abelardo Luz (SC) in a Clayey Oxisol. The experimental design was a randomized block design with three replications. The treatments were arranged in a 2 x 2 factorial arrangement. The first factor was N Fertilization Time: in the N-Pasture level, nitrogen (200 kg ha-1 N) and N-Grains level, no nitrogen was applied. The second factor was the Grazing Height, characterized by two sward heights of oat at 15 cm (Low Height Pasture) and at 30 cm (High Height Pasture). Corn hybrid ‘Máximus’ was sowed in 10thOctober, 31 days after the removal of animals. In the twelve resulting plots from the combination of treatments on pasture phase (N Fertilization Time x Grazing Height) rates of N-fertilizer (0, 100, 200 e 300 Kg ha-1 of N) as urea were allocated in the split plot.We conclude that anticipated N fertilization of winter cover crop pasture to provide high-quality forage and carry-over N to the subsequent corn crop and may eventually replace side drees nitrogen fertilization on corn and can improve overall N fertilizer efficiency use in integrated crop-livestock systems.The rate of K release from plant residues is very fast, releasing large quantities in the first days after plant desiccation.Despite of considerably high nitrogen dose used in both the pasture and at the grain crop it was not observed nitrate leaching risks during the study period.

Optimization of lipase production from yeasts strains isolated from olive mil wastewater

Dissertação submetida à Universidade de Lisboa, Faculdade de Ciências para a obtenção do Grau de Mestre em Microbiologia Aplicada.

Características de cinzas e sua aplicação no tratamento de gases durante a gasificação de biomassa

Na procura de melhores combustíveis para a produção de energia térmica e energia elétrica, a biomassa apresenta-se como uma das fontes de energia renováveis menos prejudiciais ao meio ambiente, esta é considerada como um recurso neutro do ponto de vista de emissões de dióxido de carbono. Atualmente, a tecnologia predominante no domínio da conversão energética de biomassa por via termoquímica é a combustão. Contudo, verifica-se a procura de combustíveis de melhor qualidade produzidos a partir de biomassa, como por exemplo na forma gasosa (gás de combustível). A produção deste tipo de combustíveis gasosos envolvendo processos de gasificação carece do desenvolvimento de tecnologia que permita obter um gás combustível com características adequadas às utilizações pretendidas. Os problemas mais relevantes relacionados com a conversão termoquímica da biomassa incluem a produção de cinzas e de alcatrões, estes podem levar a vários problemas operatórios. O presente trabalho teve dois objetivos, a caracterização das cinzas resultantes do processo de combustão de biomassa e o estudo do efeito da aplicação das cinzas para melhorar as propriedades do gás produzido durante o processo de gasificação de biomassa, principalmente na redução de compostos condensáveis (alcatrões). As cinzas volantes da combustão de biomassa analisadas apresentam na sua constituição elementos químicos característicos da biomassa, onde o cálcio apresenta-se em concentrações mais elevadas. Em menores concentrações encontram-se sódio, magnésio, fósforo, enxofre, cloro, potássio, manganês e ferro. As cinzas de fundo, pelo contributo que a areia do leito tem, são caracterizadas por conterem grandes concentrações de silício. Durante os processos de gasificação de biomassa a concentração de compostos condensáveis diminuiu com o aumento da razão de equivalência. As cinzas, colocadas no reator de leito fixo, apresentam um efeito positivo sobre a qualidade do gás, nomeadamente um aumento de 47,8% no teor de H2 e de 11% de CO, consequentemente obteve-se um gás combustível com PCI (poder calorífico inferior) mais elevado.

O efeito da adubação foliar na variedade de batata (Solanum tuberosum) de indústria “LADY ROSETTA”

A batata está sujeita a stresses bióticos (doenças, pragas, infestantes) e abióticos (condições climáticas, secura, excesso de água, ou fitotoxicidade provocada por herbicidas, entre outros). Os adubos foliares contendo nutrientes (macro e micronutrientes) poderão contribuir para uma melhor nutrição da planta, para além de exercer uma ação benéfica ao nível do potencial hídrico da folha e sua proteção contra os diversos inimigos bióticos. Instalou-se um ensaio em Marinhais na variedade de batata de indústria Lady Rosetta, para avaliar o efeito da adubação foliar de uma gama de adubos foliares “Humigel”, contendo, entre outros nutrientes, o enxofre e o potássio, numa situação de fitotoxidade causada pela aplicação de um herbicida. O ensaio foi instalado com um dispositivo experimental de parcelas totalmente aleatórias, com 4 repetições. Os tratamentos foram a aplicação de “Humigel” e sem aplicação (testemunha). A produção comercial nas parcelas com “Humigel” foi significativamente mais elevada (48 192 kg/ha) do que nas parcelas testemunha (43 458 kg/ha). Não se registaram diferenças significativas ao nível do número de tubérculos (comercial e total) por planta, nem ao nível dos parâmetros de qualidade (peso específico e teste de fritura).

Obtenção de alumina a partir de latas de alumínio utilizando diferentes digestões e 8-hidroxiquinolina como agente quelante

Aluminum cans has wide uses and Brazil is among one of the world's largest country at recycling, to provide an option that adds value to raw materials, this paper uses aluminum cans as aluminum source for the production of alumina. Evaluating the use of acid digestions (hydrochloric acid, sulfuric acid and aqua regia) and basic (potassium hydroxide) to solubilize the aluminum after which will be complexed with 8-hydroxyquinoline at different pH's. By calcination, the complex produces an oxide with metal components with varying proportions depending on the digestion process. The thermal behavior of the complex varies with the morphology and metals present, occurring different events due to these characteristics.

Avaliação do potencial da macrófita Pistia stratiotes na exposição de íon cromo (VI): biossorção e tolerância

The environmental pollution caused by industries has increased the concentration of pollutants in the environment, especially in water. Among the most diverse contaminants, there is the metals, who may or may not to be heavy/toxic, causing effluent of difficult treatment when in low concentrations. The search for alternative measures of wastewater effluent treatment has led to studies using phytoremediation technique through the various matrices (plant, fungi, bacteria) as means of polishing treatment to remove contaminants by means of biosorption/bioaccumulation. In order to use the phytoremediation technique for removing metals of the environmental, it have been performed bioassay with the macrophyte Pistia stratiotes. The bioassays were realized with healthy plants of P. stratiotes acclimatized in a greenhouse, at room temperature and lighting conditions during 28 days of cultivate. The cultivations were performed in glass vessels containing 1 L of the hydroponic solution with chromium (VI) in the potassium dichromate form with concentration range 0.10 to 4.90 mg L-1. The experiments were performed by Outlining Central Composite Rotational (OCCR), where the kinetics of bioaccumulation and chlorophyll a fluorescence were monitored in plants of P. stratiotes during cultivation. The collections of the samples and cultive solution were performed according to the OCCR. The chromium levels were measured in samples of P. stratiotes and the remaining solutions by the methodology of atomic absorption spectrometry by flame. The tolerance of P. stratiotes in relation to exposure to chromium (VI) was analyzed by parameters of physiological activity by means of chlorophyll a fluorescence, using the portable fluorometer PAM (Pulse Amplitude Modulation). The development of P. stratiots and their biomass were related to the time factor, while bioaccumulation capacities were strongly influenced by factors of time and chromium concentration (VI). The chlorophyll fluorescence parameters were affected by chromium and the exposure time at the bioassays. It was obtained an higher metal removal from the root in relation to the sheet, reaching a high rate of metal removal in solution. The experimental data removal kinetics were represented by kinetic models Irreversibly Langmuir, Reversible Langmuir, Pseudo-first Order and Pseudo-second Order, and the best fit for the culture solution was the Reversible Langmuir model with R² 0.993 and for the plant the best model was Pseudo-second order with R² 0.760.