Mathematical foundations for efficient structural controllability and observability analysis of complex systems

The relationship between structural controllability and observability of complex systems is studied. Algebraic and graph theoretic tools are combined to prove the extent of some controller/observer duality results. Two types of control design problems are addressed and some fundamental theoretical results are provided. In addition new algorithms are presented to compute optimal solutions for monitoring large scale real networks.

New developments in lycopene analysis by spectroscopic and chromatographic techniques, accompanied by mathematical modelling

Comunicación Oral sobre los resultados obtenidos en el estudio de las propiedades del lycopeno presente en el tomate como compuesto bioactivo. Se realizó la identificación y cuantificación por diferentes metodologías experimentales. Se muestran los resultados analíticos comapartivamente con distintas técnicas.

Mathematical development of stress-strain law for rock block contacts

The fracture behavior of rock block contacts has been studied for many years. Unfortunately, up to now, there is not a rigorous formulation or a solid theoretical foundation to support it. A mathematical development to represent the failure mechanism which occurs in the contacts between rock blocks is presented to evaluate the performance of breaking mechanism of such blocks relating it to the morphology of the contact and mechanical parameters of the material. The examined framework includes the evaluation of the surface roughness of first order in the failure mechanism of the granular particles of large size and the development of a theoretical model describing the morphology of the contact between rock blocks.

A simple mathematical model that describes the growth of the area and the number of total and viable cells in yeast colonies

We propose a model, based on the Gompertz equation, to describe the growth of yeasts colonies on agar medium. This model presents several advantages: (i) one equation describes the colony growth, which previously needed two separate ones (linear increase of radius and of the squared radius); (ii) a similar equation can be applied to total and viable cells, colony area or colony radius, because the number of total cells in mature colonies is proportional to their area; and (iii) its parameters estimate the cell yield, the cell concentration that triggers growth limitation and the effect of this limitation on the specific growth rate. To elaborate the model, area, total and viable cells of 600 colonies of Saccharomyces cerevisiae, Debaryomyces fabryi, Zygosaccharomyces rouxii and Rhodotorula glutinis have been measured. With low inocula, viable cells showed an initial short exponential phase when colonies were not visible. This phase was shortened with higher inocula. In visible or mature colonies, cell growth displayed Gompertz-type kinetics. It was concluded that the cells growth in colonies is similar to liquid cultures only during the first hours, the rest of the time they grow, with near-zero specific growth rates, at least for 3 weeks.

Distributed, layered and reliable computing nets to represent neuronal receptive fields

Abstract. Receptive fields of retinal and other sensory neurons show a large variety of spatiotemporal linear and non linear types of responses to local stimuli. In visual neurons, these responses present either asymmetric sensitive zones or center-surround organization. In most cases, the nature of the responses suggests the existence of a kind of distributed computation prior to the integration by the final cell which is evidently supported by the anatomy. We describe a new kind of discrete and continuous filters to model the kind of computations taking place in the receptive fields of retinal cells. To show their performance in the analysis of diferent non-trivial neuron-like structures, we use a computer tool specifically programmed by the authors to that efect. This tool is also extended to study the efect of lesions on the whole performance of our model nets.

Estudio de la dinámica no lineal de vórtices magnéticos en nanodots

En el presente trabajo se ha realizado un estudio sobre el comportamiento dinámico de vórtices magnéticos en su aplicación en osciladores de espín-torque. A partir de los modelos matemáticos elaborados en [4] sobre estos osciladores de espín-torque, se han simulado y estudiado usando MATLAB, entre otras herramientas, para tratar de verificar su concordancia con el comportamiento físico observado en el laboratorio. Es importante señalar que el estudio tiene en cuenta la dinámica no lineal, esencial para describir correctamente un sistema oscilante en la práctica. El análisis matemático del sistema que describe la órbita del núcleo de un vórtice magnético sometido a la acción de un campo magnético externo oscilatorio, muestra la posibilidad de la existencia de hasta tres soluciones especiales, según la geometría del dot y el valor del campo magnético de excitación, tanto de su frecuencia como de su amplitud. Estas soluciones corresponden a estados estacionarios del vórtice caracterizados como una órbita circular, aunque en el caso de existir tres equilibrios uno de ellos es inestable. El modelo matemático ha sido estudiado y analizado para reproducir los resultados obtenidos en [4] y adicionalmente se ha implementado el caso de la energía potencial del vórtice con el término no lineal distinto de [4] (con una constante β negativa). Los resultados obtenidos bajo esta suposición muestran una cierta disparidad respecto al caso de β positiva y reflejan la existencia de comportamientos muy diferentes. En la dinámica del vórtice bajo la suposición de β negativa también surgen bifurcaciones de pliegue (fold-over) en la trayectoria del núcleo del vórtice: siempre se obtienen tres equilibrios a bajas frecuencias y aparecen a veces dos intervalos con tres equilibrios en lugar de uno solo, a diferencia del caso de β positiva. El comportamiento del núcleo del vórtice sigue un proceso de histéresis en ambos casos, cuando se dan ciertas condiciones. ABSTRACT. This work is a study about the dynamic behaviour of magnetic vortex in its application in spin-torque oscillators. Starting from mathematical models developed in [4] on this subject, a further analysis has been performed using MATLAB to simulate the behaviour of vortex-based spin-torque oscillators as different relevant parameters vary. The main aim of the study is to check if the obtained results can explain the observed physical behaviour, and an important observation is that fully nonlinear effects are taken into consideration. The mathematical analysis of the system that describes the orbit of the vortex core under the influence of an external oscillatory magnetic field shows that there are up to three possible special solutions depending on the dot geometry and the magnetic driving field value, both on its amplitude as well as its frequency. These solutions correspond to a stable circular orbit of the vortex core, but when the system has three solutions one of them is unstable. This mathematical model has been analyzed and studied to reproduce the results obtained in [4] and, additionally, the effect of a negative value of the nonlinear part of the vortex potential (constant β). Results derived from this assumption exhibit certain differences with respect to the case of a positive constant (β) and reflect the existence of very different patterns. Vortex dynamics under the supposition of a negative β also yield fold-over bifurcations in the trajectory of the vortex core: there are always three solutions at low frequencies and there may be two different intervals with three solutions as opposed to the case of positive β. The vortex core follows a hysteresis process in both cases, when certain conditions are met.

Depth Averaged Models for Fast Landslide Propagation: Mathematical, Rheological and Numerical Aspects

This paper presents an overview of depth averaged modelling of fast catastrophic landslides where coupling of solid skeleton and pore fluid (air and water) is important. The first goal is to show how Biot-Zienkiewicz models can be applied to develop depth integrated, coupled models. The second objective of the paper is to consider a link which can be established between rheological and constitutive models. Perzyna´s viscoplasticity can be considered a general framework within which rheological models such as Bingham and cohesive frictional fluids can be derived. Among the several alternative numerical models, we will focus here on SPH which has not been widely applied by engineers to model landslide propagation. We propose an improvement, based on combining Finite Difference meshes associated to SPH nodes to describe pore pressure evolution inside the landslide mass. We devote a Section to analyze the performance of the models, considering three sets of tests and examples which allows to assess the model performance and limitations: (i) Problems having an analytical solution, (ii) Small scale laboratory tests, and (iii) Real cases for which we have had access to reliable information

Singularities and undefinitions in the calibration functions of sonic anemometers

A mathematical model of the process employed by a sonic anemometer to build up the measured wind vector in a steady flow is presented to illustrate the way the geometry of these sensors as well as the characteristics of aerodynamic disturbance on the acoustic path can lead to singularities in the transformation function that relates the measured (disturbed) wind vector with the real (corrected) wind vector, impeding the application of correction/calibration functions for some wind conditions. An implicit function theorem allows for the identification of those combinations of real wind conditions and design parameters that lead to undefined correction/ calibration functions. In general, orthogonal path sensors do not show problematic combination of parameters. However, some geometric sonic sensor designs, available in the market, with paths forming smaller angles could lead to undefined correction functions for some levels of aerodynamic disturbances and for certain wind directions. The parameters studied have a strong influence on the existence and number of singularities in the correction/ calibration function as well as on the number of singularities for some combination of parameters. Some conclusions concerning good design practices are included.

Mathematical modelling of neural processes within the oculomotor system

It is presented a mathematical model of the oculomotor plant, based on experimental data in cats. The system that generates, from the neuronal processes at the motoneuron, the control signals to the eye muscles that moves the eye. In contrast with previous models, that base the eye movement related motoneuron behavior on a first order linear differential equation, non-linear effects are described: A dependency on the eye angular position of the model parameters.

Application of the dynamic models to the detection of imperfections in plate Structures

This paper is part of a set of publications related with the development of mathematical models aimed to simulate the dynamic input and output of experimental nondestructive tests in order to detect structural imperfections. The structures to be considered are composed by steel plates of thin thickness. The imperfections in these cases are cracks and they can penetrate either a significant part of the plate thickness or be micro cracks or superficial imperfections. The first class of cracks is related with structural safety and the second one is more connected to the structural protection to the environment, particularly if protective paintings can be deteriorated. Two mathematical groups of models have been developed. The first group tries to locate the position and extension of the imperfection of the first class of imperfections, i.e. cracks and it is the object of the present paper. Bending Kirchoff thin plate models belong to this first group and they are used to this respect. The another group of models is dealt with membrane structures under the superficial Rayleigh waves excitation. With this group of models the micro cracks detection is intended. In the application of the first group of models to the detection of cracks, it has been observed that the differences between the natural frequencies of the non cracked and the cracked structures are very small. However, geometry and crack position can be identified quite accurately if this comparison is carried out between first derivatives (mode rotations) of the natural modes are used instead. Finally, in relation with the analysis of the superficial crack existence the use of Rayleigh waves is very promising. The geometry and the penetration of the micro crack can be detected very accurately. The mathematical and numerical treatment of the generation of these Rayleigh waves present and a numerical application has been shown.