Triticale, milheto e adubação fosfatada para formação de palhada em semeadura direta

As fontes de P mais utilizadas são os fosfatos solúveis em água, pela maior facilidade de liberação de P no solo. Entretanto, devido às características dos solos tropicais, grande parte desse P acaba adsorvida às partículas do solo, tornando-se indisponível. Os fosfatos reativos podem, inicialmente, liberar o P de maneira mais lenta; entretanto, a partir dos cultivos, este elemento poderá ser liberado de forma contínua, podendo haver menor fixação. O objetivo deste trabalho foi estudar a resposta à aplicação de duas fontes de P na cultura do triticale e o efeito residual dessa adubação no milheto, cultivados em semeadura direta, avaliando-se: fertilidade do solo; produção de matéria seca; teor e quantidade de P nas plantas e palha de cobertura; densidade de plantas; teor e quantidade de P nos grãos; e produtividade do triticale. O experimento foi conduzido em Latossolo Vermelho distroférrico. No mês de abril foram aplicados, a lanço, em superfície, três tratamentos: sem aplicação de P2O5; aplicação de 80 kg ha-1 de P2O5 de superfosfato triplo; e aplicação de 80 kg ha-1 de P2O5 de fosfato natural Arad. em seguida, semeou-se o triticale (X Triticosecale Wittmack), que foi conduzido até a colheita. em setembro, após a colheita do triticale, semeou-se o milheto (Pennisetum glaucum (L.) R. Brown), com o objetivo de elevar a cobertura de palha do solo, sendo ele dessecado no florescimento no mês de novembro. A aplicação de fosfato solúvel em superfície proporcionou lixiviação do P até a camada de 5-10 cm de profundidade do solo e melhor nutrição fosfatada do triticale cultivado em seguida, assim como maior produção de grãos. Apesar do aumento no teor de P disponível no solo, proporcionado pelo fosfato solúvel, a aplicação de P no triticale não redundou em elevação da produção de matéria seca, do teor e da quantidade de P na parte aérea do milheto cultivado em sequência.

Avaliação preliminar da viabilidade de produção in vitro de um isolado brasileiro de baculovírus Spodoptera frugiperda MNPV

In vivo production of viral biopesticides is the major source of viral insecticides currently in the marketplace. However, this system presents limitations during production scale-up. For the Spodoptera frugiperda nucleopolyhedrovirus (SfMNPV), the insect used for replication has cannibalistic characteristics, thus production is even more difficult. Insect cells are commonly used for in vitro baculovirus production. Most of these cell lines are derived from Lepidoptera species. The Sf21 cell line is derived from Spodoptera frugiperda caterpillar ovarian tissue, and its clonal isolate Sf9 has been used for biopesticide production due to its ease of growth in suspension cultures. In this work, the in vitro production capabilities of a Brazilian SfMNPV isolate obtained from cornfields was evaluated. Comparison of polyhedra production was carried out using both Sf21 and Sf9 cells, based on volumetric and specific yields. Both cell lines were cultivated in Hyclone medium supplemented with different fetal bovine serum concentrations (2,5 and 5%). The best results were obtained using Sf9 cells supplemented with 5% serum. These results were further confirmed quantitively through kinetic parameter estimation for both cells lines and different serum concentrations. After seven successive passages, this system still presented high specific polyhedra production

Semisolid systems containing propolis for the treatment of periodontal disease: In vitro release kinetics, syringeability, rheological, textural, and mucoadhesive properties

Formulations containing poloxamer 407 (P407), carbopol 934P (C934P), and propolis extract (PE) were designed for the treatment of periodontal disease. Gelation temperature, in vitro drug release, rheology, hardness, compressibility, adhesiveness, mucoadhesion, and syringeability of formulations were determined. Propolis release from formulations was controlled by the phenomenon of relaxation of polymer chains. Formulations exhibited pseudoplastic flow and low degrees of thixotropy or rheopexy. In most samples, increasing the concentration of C934P content significantly increased storage modulus (G'), loss modulus (G ''), and dynamic viscosity (n') at 5 degrees C, G '' exceeded G'. At 25 and 37 degrees C, n' of each formulation depended on the oscillatory frequency. Formulations showed thermoresponsive behavior, existing as a liquid at room temperature and gel at 34-37 degrees C. Increasing the C934P content or temperature significantly increased formulation hardness, compressibility, and adhesiveness. The greatest mucoadhesion was noted in the formulation containing 15% P407 (w/w) and 0.25% C934P (w/w). The work of syringeability values of all formulations were similar and very desirable with regard to ease of administration. The data obtained in these formulations indicate a potentially useful role in the treatment of periodontitis and suggest they are worthy of clinical evaluation. (c) 2007 Wiley-Liss, Inc.

Rheological, mechanical and mucoadhesive properties of thermoresponsive, bioadhesive binary mixtures composed of poloxamer 407 and carbopol 974P designed as platforms for implantable drug delivery systems for use in the oral cavity

This study described the formulation and characterisation of the viscoelastic, mechanical and mucoadhesive properties of thermoresponsive, binary polymeric systems composed of poloxamer (P407) and poly(acrylic acid, C974P) that were designed for use as a drug delivery platform within the oral cavity. Monopolymeric and binary polymeric formulations were prepared containing 10, 15 and 20% (w/w) poloxamer (407) and 0.10-0.25% (w/w) poly(acrylic acid, 934P). The flow theological and viscoelastic properties of the formulations were determined using controlled stress and oscillatory rheometry, respectively, the latter as a function of temperature. The mechanical and mucoadhesive properties (namely the force required to break the bond between the formulation and a pre-hydrated mucin disc) were determined using compression and tensile analysis, respectively. Binary systems composed of 10% (w/w) P407 and C934P were elastoviscous, were easily deformed under stress and did not exhibit mucoadhesion. Formulations containing 15 or 20% (w/w) Pluronic P407 and C934P exhibited a sol-gel temperature T(sol/gel), were viscoelastic and offered high elasticity and resistance to deformation at 37 degrees C. Conversely these formulations were elastoviscous and easily deformed at temperatures below the sol-gel transition temperature. The sol-gel transition temperatures of systems containing 15% (w/w) P407 were unaffected by the presence of C934P; however, increasing the concentration of C934P decreased the T(sol/gel) in formulations containing 20%(w/w) P407. Rheological synergy between P407 and C934P at 37 degrees C was observed and was accredited to secondary interactions between these polymers, in addition to hydrophobic interactions between P407 micelles. Importantly, formulations composed of 20% (w/w) P407 and C934P exhibited pronounced mucoadhesive properties. The ease of administration (below the T(sol/gel)) in conjunction with the viscoelastic (notably high elasticity) and mucoadhesive properties (at body temperature) render the formulations composed of 20% (w/w) P407 and C934P as potentially useful platforms for mucoadhesive, controlled topical drug delivery within the oral cavity. (c) 2009 Published by Elsevier B.V.

A Dança na Escola: um sério problema a ser resolvido

Pretendemos abordar os aspectos relacionados à Dança na Escola e pensarmos sobre uma formação continuada, a fim de discutir e refletir a elaboração de propostas de capacitação em Dança voltadas aos professores de Educação Física, principalmente no interior do Estado de São Paulo. Analisaremos a formação inicial dos professores, objetivos, conteúdos e possibilidades de aplicação da Dança no contexto educacional. Apesar do aumento das pesquisas em relação ao ensino da Dança na Escola, falta um espaço adequado e professores comprometidos com um trabalho sério, consciente e crítico, pois a hegemonia do esporte se encontra muito arraigada na cultura escolar. Uma forma de amenizar esse problema seriam cursos de capacitação, de forma permanente, voltados aos conteúdos de Dança, a fim de que esses professores possam ter vivências em práticas dançantes embasadas em uma fundamentação teórica para, assim, discutir, analisar e refletir a melhor maneira de trabalhar esta arte no âmbito escolar.

Caracterização da neofobia alimentar em crianças de três a seis anos

Alimentation is essential in life. Concerning omnivores, characterized by the necessity of a varied diet to satisfy their metabolic needs, it is extremely advantageous the assumption of new foods. However, the assumption of new unknown foods is, potentially dangerous, because of possible intoxications. In this sense, one of the most important behaviors related to reducing risks is the so called food neophobia, characterized by the rejection of new foods and/or an ingestion of very little amounts. The aim of the present study was to investigate if age, sex and socio-economical status were able to influence food neophobia. The neophobia has been described in a range of 3-6 years old children taken both from public and private schools within the city of Natal-RN. Four different type of ice-creams, each one characterized by a different flavor, have been utilized. Two flavors were known to the young and the remaining two flavor were new. We didn't find significant differences between the investigated variables. However, the exploitation of data from the survey conducted showed that the ease or not to accept new foods obtained, was correlated with the variables under the same guidelines observed in literature. Aspects related to the stimulus used probably eased the neophobic answer. Then, it is suggested that the food neophobia can be influenced by sex, age and socioeconomic factors of individuaIs. Neophobia tends to be more common in girls, with ages between three to four years old and with a low leveI socioeconomic. In this sense, given the importance of kid neophobic reaction to the development of dietary patterns of other life's stages, it is necessary to make further studies to better explain this phenomenon. Given the pivotal role of food neophobia to the development of alimentary habits within all ages of life, other studies will be necessary for a better comprehension of such phenomena. Key-words: food neophobia; Evolutionary Psychology;children food intake; diet restriction; children's diet development

Produtividade fabril II - método para rápido aumento da produtividade fabril: redução de esperas dentro do ciclo da operação

O método para rápido aumento da produtividade fabril, aplicável principalmente à indústria brasileira de manufatura (17% do PIB), fundamenta-se exclusivamente na redução ou eliminação do tempo inativo do homem, da máquina e do material, que é a grande causa da ineficiência. O método exige a utilização de apenas cinco das mais simples, elementares e conhecidas técnicas e é aplicável às vinte situações mais freqüentes (objetos de estudo) na indústria de manufatura. Nossa experiência atesta que o método é capaz de aumentar a produtividade fabril em valor superior a 30%, em poucos meses e de forma perene (houve um caso de aumento de 160% em toda uma seção de usinagem de uma empresa multinacional). Sua aplicação e a implantação das medidas dele decorrentes são feitas com extrema facilidade e, por isto, os resultados surgem muito rapidamente. Atinge portanto seu objetivo: proporcionar aumento da produtividade fabril em curto espaço de tempo. Este artigo detalhará sete objetos de estudo (situações): 1.redução da espera da máquina durante as inspeções; 2.redução da espera do operário, abordando trabalho em equipe, produção em linha e operação com ajudante; e 3.redução da espera do operador de máquina, por meio da diminuição do tempo-máquina, do controle do tempo-máquina e da atribuição de outras atividades ao operador pela adoção da célula de manufatura.

AO-OIL: um middleware orientado a aspectos baseado em uma arquitetura de referência

Middleware platforms have been widely used as an underlying infrastructure to the development of distributed applications. They provide distribution and heterogeneity transparency and a set of services that ease the construction of distributed applications. Nowadays, the middlewares accommodate an increasing variety of requirements to satisfy distinct application domains. This broad range of application requirements increases the complexity of the middleware, due to the introduction of many cross-cutting concerns in the architecture, which are not properly modularized by traditional programming techniques, resulting in a tangling and spread of theses concerns in the middleware code. The presence of these cross-cutting concerns limits the middleware scalability and aspect-oriented paradigm has been used successfully to improve the modularity, extensibility and customization capabilities of middleware. This work presents AO-OiL, an aspect-oriented (AO) middleware architecture, based on the AO middleware reference architecture. This middleware follows the philosophy that the middleware functionalities must be driven by the application requirements. AO-OiL consists in an AO refactoring of the OiL (Orb in Lua) middleware in order to separate basic and crosscutting concerns. The proposed architecture was implemented in Lua and RE-AspectLua. To evaluate the refactoring impact in the middleware architecture, this paper presents a comparative analysis of performance between AO-OiL and OiL

Formal verification of PLC programs using the B Method

PLCs (acronym for Programmable Logic Controllers) perform control operations, receiving information from the environment, processing it and modifying this same environment according to the results produced. They are commonly used in industry in several applications, from mass transport to petroleum industry. As the complexity of these applications increase, and as various are safety critical, a necessity for ensuring that they are reliable arouses. Testing and simulation are the de-facto methods used in the industry to do so, but they can leave flaws undiscovered. Formal methods can provide more confidence in an application s safety, once they permit their mathematical verification. We make use of the B Method, which has been successfully applied in the formal verification of industrial systems, is supported by several tools and can handle decomposition, refinement, and verification of correctness according to the specification. The method we developed and present in this work automatically generates B models from PLC programs and verify them in terms of safety constraints, manually derived from the system requirements. The scope of our method is the PLC programming languages presented in the IEC 61131-3 standard, although we are also able to verify programs not fully compliant with the standard. Our approach aims to ease the integration of formal methods in the industry through the abbreviation of the effort to perform formal verification in PLCs

Doenças de Veiculação Hídrica em Trechos da Bacia do Rio Piranhas-Assu: ocorrência de bactérias oportunistas, caracterização epidemiológica e concepções de professores e agentes de saúde

Water is essential to life and all living organisms and their supply is necessary for economic development and quality of life of human populations, but their quality has been altered by human actions. In semi-arid northeast, the water is an issue of concern, especially its quality. This region is common to the construction of reservoirs that capture rain water, streams and temporary rivers in search of ease this situation, being intended for various purposes. Water scarcity is a limiting factor for the economic and social development of the region and contributes to the maintenance of waterborne diseases. About 80% of diseases that occur in developing countries are infected by waterborne pathogens. Therefore, this study aimed to determine in two environments that are part of semilênticos Armando Ribeiro Gonçalves reservoir, and a stretch of the river Assu, all located in the semiarid RN, the occurrence of opportunistic pathogenic bacteria; check the conceptions of teachers and health workers about the issues "waterborne diseases" and "bacteria" and a diagnosis of diarrheal diseases that affect the population in some municipalities of the semi-arid region of RN from a survey of epidemiological data. For identification of bacteria using commercial kits and the diagnosis of diarrheal disease was based on information from databases. The previous conceptions of teachers and health workers were obtained through questionnaires. The results confirmed the presence of opportunistic bacteria in the studied area, showing the importance of monitoring water quality. There was an under-reporting of cases of diarrhea pointing out flaws in the monitoring of Diarrheal Diseases and indicating the need to improve it. It was felt also the need to implement educational activities on topics dealt with both with teachers and health workers, since they were identified misconceptions on the subject

Experiências de inverno no seridó potiguar

The knowledge known as "winter experiences" has been developed for centuries among country people in the Brazilian Northeast hinterlands. It consists in the systematic observation of the nature to forecast and protect people against the effects of droughts. This knowledge is transmitted orally through generations. These experiences are guided by the observation of the behavior of fauna, flora, stars, the weather in the holy days and other very specific aspects of the lives of country people. Almost all country people living in the rural area know at least one experience, but the Prophets of Rain are known as the communicators of winter prophecies formulated from the observation of the experiences. The country person is identified as a Prophet of Rain because of his close relationship with nature and his ability to forecast. No matter if the prophecies are always right, he possesses a vital social role, as his practices contribute to prevent, ease and encourage other people. The main aim of this work is to analyze the role of the winter experiences for the country people in the Seridó Potiguar. In this sense, we sought to understand to what extent this knowledge still orients the productive practices of farmers living in this region and identify which factors instigate the observation of winter experiences nowadays. 241 questionnaires were applied to farmers in the rural cities of Acari, Caicó, Parelhas and Lagoa Nova and interviews were conducted with 15 Prophets in the Seridó. The methodological framework of this work is the analysis of content proposed by Bardin (2010). In this study area, the experiences exert influence and relevance to the country people in the Seridó, because they consider them as a way to ease their anguishes face the possible drought in the region. The major role of the Prophet is to feed the hope of country people for better days, rather than contribute for the organization of the productive activities. Among the interviewed people, the forecast from the observation of winter experiences have greater credibility than the meteorological and disseminated by media. The Prophets of Rain base their prophecies on the set of natural elements present in the environment. Many factors stimulate the winter experiences by the Prophets nowadays, as cultural transmission, age, relationship with nature, level of education, faith, among others, but specially the productive activities (agriculture and cattle raising) and the droughts. The winter means abundance and happiness in this region and the experience is one of the ways that people find to minimize the anxiety and, according to their possibilities, to prepare for a year of droughts or for winter

Human breast tumor slices as an alternative approach to cell lines to individualize research for each patient

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Extração de DNA de materiais de arquivo e fontes escassas para utilização em reação de polimerização em cadeia (PCR)

Este trabalho visou a comparação de cinco métodos diferentes de extração de DNA de materiais de arquivo (tecidos incluídos em parafina, esfregaços de sangue periférico - corados e não corados com Leishman, lâminas com mielogramas, gotas de sangue em Guthrie Card) e de fontes escassas (células bucais, um e três bulbos capilares e 2 mL de urina), para que fossem avaliadas a facilidade de aplicação e a facilidade de amplificação deste DNA pela técnica da reação de polimerização em cadeia (PCR). Os métodos incluíram digestão por proteinase K, seguida ou não por purificação com fenol/clorofórmio; Chelex 100® (BioRad); Insta Gene® (BioRad) e fervura em água estéril. O DNA obtido foi testado para amplificação de três fragmentos gênicos: Brain-derived neutrophic factor (764 pb), Factor V Leiden (220 pb) e Abelson (106 pb). de acordo com o comprimento do fragmento gênico estudado, da fonte potencial de DNA e do método de extração utilizado, os resultados caracterizaram o melhor caminho para padronização de procedimentos técnicos a serem incluídos no manual de Procedimentos Operacionais Padrão do Laboratório de Biologia Molecular do Hemocentro - HC - Unesp - Botucatu.

Estratégias de Produção in vitro de Bioinseticida Viral: influências do Isolado, da Cinética e do Modo de operação

Societal concerns about environmental sustainability has lead to the development of ecologically-friendly alternatives to chemical insecticides for crop protection. One such alternative is biological pest control. In particular, baculoviruses are well suited as insect biopesticides due to their narrow host specificity and relative ease of propagation. In Brazil, the baculovirus Anticarsia gemmatalis nucleopolyhedrovirus (AgMNPV) is the main biological control agent employed for the soybean pest, Anticarsia gemmatalis. This baculovirus biopesticide is currently produced using caterpillars, but increasing market demand for the product has encouraged the development of an in vitro manufacturing process, which can be scaled up to much higher virus productivities. In this study, three wild-type AgMNPV isolates (AgMNPV-2D, AgMNPV-MP2 and AgMNPV-MP5) and a recombinant form (vAgEGT-LacZ) were characterised in terms of occlusion body (OB) production and infection kinetics, to enable future optimisation of the in vitro production process. These viruses were propagated using a Spodoptera frugiperda (IPLB-SF21) insect cell line grown in shaker-flask batch cultures. Among the virus isolates tested, AgMNPV-MP5 was found to be the best producer, yielding (5.3±0.85)x108 OB/mL after 8 days post infection. The characterisation of vAgEGT-LacZ propagation in suspension cell cultures has not been previously reported in the literature; hence it became the main focus for this thesis. In particular, it was carried out a study on the effect of the multiplicity of infection (MOI) on OB production. Five successive batches were performed getting a final production (8.9±1.42)x1014 occlusion bodies, considering that production is related for a bioreactor with final volume of 10m3. A low MOI associated with a fed-batch process for vAgEGT-LacZ production was found to support a 3-fold higher OB yield when compared to the default batch process (1.8x107 and 5.3x107 OB/mL, respectively). This yield is competitive with regards to the production process.

Treatment of venous ulcers with fibrin sealant derived from snake venom

Venous ulcers of the lower limbs complicated by infection or chronicity represent a serious public health problem. The elevated number of those afflicted burdens the health services, interferes in quality of life and causes absenteeism. Although there are 2,500 items on the market, ranging from the simplest dressing up to the most complex types of dressing, treatment remains a challenge. Among the substances used, fibrin sealant is the one that promotes diminution of bacterial colonization and of edema, controls hemorrhaging, alters the pain threshold by protecting the nerve endings, hydrates the wound bed and forms granulation tissue that favors healing. Its disadvantages include higher cost and utilization of human fibrinogen that can transmit infectious diseases. The Center for the Study of Venoms and Venomous Animals (CEVAP) at São Paulo State University (UNESP) developed a new sealant made up of fibrinogen extracted from large animals and from an enzyme obtained from snake venom. The present study, developed in the Health Education Clinic (CEPS) of Sacred Heart University (USC) aimed to evaluate the effect of the new sealant on the healing process of venous ulcers in 24 adult patients, seven of whom were male and 17 female. Two study groups were formed as follows: Group 1 (G1) - control group of 11 patients treated with essential fatty acid (EFA) and Unna's boot, and Group 2 (G2) - 13 patients treated with essential fatty acid (EFA), fibrin sealant and Unna's boot. The follow-up lasted eight weeks and the sealant was applied at only the first and fourth weeks. The results showed that Group 2 presented worse lesion conditions as to healing, but, when comparing the two groups, it was noteworthy that the the sealant was effective in healing venous ulcers. There is evidence that the new sealant is recommended for leg ulcers with the following advantages: ease of application, preparation of the wound bed, diminution of pain and a higher number of discharges in the eighth week. More important, other positive characteristics are non-transmission of infectious diseases, absence of adverse reactions, and economic advantage of being produced by Brazilian technology. Finally, it is suggested that the weekly application of sealant, for at least eight weeks, could improve the healing process and consequently life quality.