Reabilitação arquitectctónica

Dissertação para obtenção do grau de Mestre em Arquitectura com especialização em Arquitectura de Interiores, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Intervenção numa aldeia numa perspectiva de reconversão

Dissertação de Mestrado para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Infrared thermography monitoring of the NaCl crystallisation process

In this work, we describe the growth of NaCl crystals by evaporating droplets of aqueous solution while monitoring them with infrared thermography. Over the course of the evaporation experiments, variations in the recorded signal were observed and interpreted as being the result of evaporation and crystallisation. In particular, we observed sharp and transient decreases in the thermosignal during the later stages of high-concentration drop evaporation. The number of such events per experiment, referred to as “pop-cold events”, varied from 1 to over 100 and had durations from 1 to 15 s. These events are interpreted as a consequence from the top-supplied creeping (TSC) of the solution feeding the growth of efflorescence-like crystals. This phenomenon occurred when the solution was no longer macroscopically visible. In this case, efflorescence-like crystals with a spherulite shape grew around previously formed cubic crystals. Other crystal morphologies were also observed but were likely fed by mass diffusion or bottom-supplied creeping (BSC) and were not associated with “pop-cold events”; these morphologies included the cubic crystals at the centre, ring-shaped at the edge of droplets and fan-shaped crystals. After complete evaporation, an analysis of the numbers and sizes of the different types of crystals was performed using image processing. Clear differences in their sizes and distribution were observed in relation to the salt concentration. Infrared thermography permitted a level of quantification that previously was only possible using other techniques. As example, the intermittent efflorescence growth process was clearly observed and measured for the first time using infrared thermography.

The influence of rock fabric in the durability of two sandstones used in the Andalusian Architectural Heritage (Montoro and Ronda, Spain)

Natural stone has been a popular and reliable building material throughout history appearing in many historic monuments and in more recent buildings. Research into the intrinsic properties of specific stones is important because it gives us a greater understanding of the factors that limit and act on them. This can help prevent serious problems from occurring in our buildings bringing both esthetic benefits and financial savings. To this end, the main objective of this research has been to study the influence of the fabric and the mineral composition of two types of sandstone on their durability. The first is a red continental sandstone from the Buntsandstein Age called “Molinaza Roja”, which is quarried in Montoro (Cordoba). The second is quarried in Ronda (Malaga) and is sold under the trade name of “Arenisca Ronda”. It is a light pink-whitish calcarenite deposited during the Late Tortonian to Late Messinian. We characterized their petrological and petrophysical properties by studying their rock fabrics, porous systems and mechanical properties. In order to obtain a complete vision of the behavior of their rock fabrics, we also carried out two decay tests, the salt crystallization and the freeze–thaw tests. We then measured the effects on the textures of the altered samples during and after the decay tests and we evaluated the changes in the porous system. By comparing the results between intact and altered samples, we found that Arenisca Ronda is less durable because it has a high quantity of expandable clays (smectites) and a high percentage of pores in the 0.1–1 μm range, in which the pressure produced by salt crystallization is strongest. In Molinaza Roja the decay agents caused significant sanding due to loss of cohesion between the clasts, especially during the salt crystallization test. In both stones, the anisotropies (oriented textures) have an important role in their hydric and dynamic behavior and also affect their mechanical properties (especially in the compression resistance). No changes in color were detected.

A organização do processo de projeto de arquitetura no meio profissional: uma análise da produção em escritórios

This paper examines, through case studies, the organization of the production process of architectural projects in architecture offices in the city of Natal, specifically in relation to building projects. The specifics of the design process in architecture, the production of the project in a professional field in Natal, are studied in light of theories of design and its production process. The survey, in its different phases, was conducted between March 2010 and September 2012 and aimed to identify, understand, and analyze comparatively, by mapping the design process, the organization of production of building projects in two offices in Natal, checking as well the relationships of their agents during the process. The project was based on desk research and exploration, adopting, for both, data collection tools such as forms, questionnaires, and interviews. With the specific aim of mapping the design process, we adopted a technique that allows obtaining the information directly from employee agents involved in the production process. The technique consisted of registering information by completing daily, during or at the end of the workday, an individual virtual agenda, in which all agent collaborators described the tasks performed. The data collected allowed for the identification of the organizational structure of the office, its hierarchy, the responsibilities of agents, as well as the tasks performed by them during the two months of monitoring at each office. The research findings were based on analyses of data collected in the two offices and on comparative studies between the results of these analyses. The end result was a diagnostic evaluation that considered the level of organization and elaborated this perspective, as well as proposed solutions aimed at improving both the organization of the process and the relationships between the agents under the lens analyzed

Understanding the role of CAP proteins in the polarization process of C. elegans

La division cellulaire asymétrique est un processus crucial dans le développement des organismes multicellulaires puisqu’elle permet la génération de la diversité cellulaire. Les cellules qui se divisent de façon asymétrique doivent tout d’abord se polariser et correctement orienter leur fuseau mitotique pour ségréger des déterminants cellulaires en deux entités distinctes. L’embryon du nématode C. elegans est un modèle robuste et largement utilisé pour étudier la division cellulaire asymétrique. Dans cet embryon, le point d'entrée du spermatozoïde détermine l'axe de polarité antéro-postérieur. Suite à la fécondation, le cortex embryonnaire est uniformément contractile et un complexe conservé formé des protéines PAR-3, PAR-6 et PKC-3 (nommé complexe PAR-3 ci-dessous) est localisé sur l'ensemble du cortex. La complétion de la méiose maternelle induit une relaxation corticale au postétieur et un flux cortical vers l’antérieur de l’embryon. Ces contractions corticales asymétriques mènent à la formation d'un domaine antérieur contenant le complexe PAR-3, tandis que le cortex postérieur, dont le complexe PAR-3 s’est délocalisé, est enrichi avec les protéines PAR-2 et PAR-1. Par conséquent, les domaines formés par les protéines PAR définissent un pôle antérieur et un pôle postérieur dans l'embryon suite au remodelage du cytosquelette. Les protéines PAR-4 et PAR-5 restent localisées de façon uniforme dans l'embryon. Curieusement, les protéines PAR exercent une régulation par rétroaction sur la contractilité corticale. Il a été montré qu’une des protéines PAR récemment identifiée, PAR-5, est orthologue à la protéine adaptatrice 14-3-3 et joue un rôle important dans la contractilité corticale. En dépit de son rôle central dans la contractilité corticale et le processus de polarisation cellulaire, le mécanisme par lequel PAR-5 régule la contractilité corticale n’est pas bien compris. Le but de ce projet est de mieux comprendre comment PAR-5 et ses interacteurs contrôlent la régulation des contractions corticales et, de ce fait, la polarité cellulaire. Dans un essai de capture de la protéine GST (GST pull-down), nous avons identifié plusieurs nouveaux interacteurs de PAR-5. Parmi ceux-ci, nous avons trouvé CAP-2 (protéine de coiffage de l'actine), qui a été identifiée dans des éxpériences de capture de 14-3-3 dans trois systèmes modèles différents. CAP-2 est un hétérodimère des protéines CAP, qui sont impliquées dans la régulation de l'actine. Nous avons trouvé que la déplétion des protéines CAP par interférence à l’ARN dans des vers de type sauvage mène à une augmentation létalité embryonnaire, ce qui suggère que ces protéines jouent un rôle important dans le développement embryonnaire. L'imagerie en temps réel d'embryons déplétés pour les protéines CAP montre qu’ils ont une diminution des contractions corticales avec un sillon de pseudoclivage mois stable, suggérant un défaut dans la régulation du cytosquelette d'actine-myosine. Ceci a également été confirmé par la diminution de la vitesse et du nombre de foci de NMY-2::GFP. En outre, ces embryons montrent une légère diminution de la taille du croissant cortical de PAR-2 lors de la phase d’établissement de la polarité. Les embryons déplétés en CAP-2 montrent également un retard dans la progression du cycle cellulaire, mais le lien entre ce phénotype et la régulation des contractions corticales reste à être précisé. La caractérisation des protéines CAP, des régulateurs du remodelage du cytosquelette, permettra d'améliorer notre compréhension des mécanismes qui sous-tendent l'établissement et le maintien de la polarité cellulaire, et donc la division cellulaire asymétrique.

EVALUATING THE OIL SANDS RECLAMATION PROCESS: ASSESSING POLICY CAPACITY AND STAKEHOLDER ACCESS FOR GOVERNMENT AND NON-GOVERNMENTAL ORGANIZATIONS OPERATING IN ALBERTA’S OIL SANDS

By employing interpretive policy analysis this thesis aims to assess, measure, and explain policy capacity for government and non-government organizations involved in reclaiming Alberta's oil sands. Using this type of analysis to assess policy capacity is a novel approach for understanding reclamation policy; and therefore, this research will provide a unique contribution to the literature surrounding reclamation policy. The oil sands region in northeast Alberta, Canada is an area of interest for a few reasons; primarily because of the vast reserves of bitumen and the environmental cost associated with developing this resource. An increase in global oil demand has established incentive for industry to seek out and develop new reserves. Alberta's oil sands are one of the largest remaining reserves in the world, and there is significant interest in increasing production in this region. Furthermore, tensions in several oil exporting nations in the Middle East remain unresolved, and this has garnered additional support for a supply side solution to North American oil demands. This solution relies upon the development of reserves in both the United States and Canada. These compounding factors have contributed to the increased development in the oil sands of northeastern Alberta. Essentially, a rapid expansion of oil sands operations is ongoing, and is the source of significant disturbance across the region. This disturbance, and the promises of reclamation, is a source of contentious debates amongst stakeholders and continues to be highly visible in the media. If oil sands operations are to retain their social license to operate, it is critical that reclamation efforts be effective. One concern non-governmental organizations (NGOs) expressed criticizes the current monitoring and enforcement of regulatory programs in the oil sands. Alberta's NGOs have suggested the data made available to them originates from industrial sources, and is generally unchecked by government. In an effort to discern the overall status of reclamation in the oil sands this study explores several factors essential to policy capacity: work environment, training, employee attitudes, perceived capacity, policy tools, evidence based work, and networking. Data was collected through key informant interviews with senior policy professionals in government and non-government agencies in Alberta. The following are agencies of interest in this research: Canadian Association of Petroleum Producers (CAPP); Alberta Environment and Sustainable Resource Development (AESRD); Alberta Energy Regulator (AER); Cumulative Environmental Management Association (CEMA); Alberta Environment Monitoring, Evaluation, and Reporting Agency (AEMERA); Wood Buffalo Environmental Association (WBEA). The aim of this research is to explain how and why reclamation policy is conducted in Alberta's oil sands. This will illuminate government capacity, NGO capacity, and the interaction of these two agency typologies. In addition to answering research questions, another goal of this project is to show interpretive analysis of policy capacity can be used to measure and predict policy effectiveness. The oil sands of Alberta will be the focus of this project, however, future projects could focus on any government policy scenario utilizing evidence-based approaches.

A política de inclusão e o percurso de formação profissional do estudante com deficiência no Instituto Federal de Educação : um estudo de caso do Campus Planaltina

Dissertação apresentada para obtenção do grau de mestre no âmbito do Mestrado em Educação Social e Intervenção Comunitária da Escola Superior de Educação do Instituto Politécnico de Santarém.

Understanding the role of CAP proteins in the polarization process of C. elegans

La division cellulaire asymétrique est un processus crucial dans le développement des organismes multicellulaires puisqu’elle permet la génération de la diversité cellulaire. Les cellules qui se divisent de façon asymétrique doivent tout d’abord se polariser et correctement orienter leur fuseau mitotique pour ségréger des déterminants cellulaires en deux entités distinctes. L’embryon du nématode C. elegans est un modèle robuste et largement utilisé pour étudier la division cellulaire asymétrique. Dans cet embryon, le point d'entrée du spermatozoïde détermine l'axe de polarité antéro-postérieur. Suite à la fécondation, le cortex embryonnaire est uniformément contractile et un complexe conservé formé des protéines PAR-3, PAR-6 et PKC-3 (nommé complexe PAR-3 ci-dessous) est localisé sur l'ensemble du cortex. La complétion de la méiose maternelle induit une relaxation corticale au postétieur et un flux cortical vers l’antérieur de l’embryon. Ces contractions corticales asymétriques mènent à la formation d'un domaine antérieur contenant le complexe PAR-3, tandis que le cortex postérieur, dont le complexe PAR-3 s’est délocalisé, est enrichi avec les protéines PAR-2 et PAR-1. Par conséquent, les domaines formés par les protéines PAR définissent un pôle antérieur et un pôle postérieur dans l'embryon suite au remodelage du cytosquelette. Les protéines PAR-4 et PAR-5 restent localisées de façon uniforme dans l'embryon. Curieusement, les protéines PAR exercent une régulation par rétroaction sur la contractilité corticale. Il a été montré qu’une des protéines PAR récemment identifiée, PAR-5, est orthologue à la protéine adaptatrice 14-3-3 et joue un rôle important dans la contractilité corticale. En dépit de son rôle central dans la contractilité corticale et le processus de polarisation cellulaire, le mécanisme par lequel PAR-5 régule la contractilité corticale n’est pas bien compris. Le but de ce projet est de mieux comprendre comment PAR-5 et ses interacteurs contrôlent la régulation des contractions corticales et, de ce fait, la polarité cellulaire. Dans un essai de capture de la protéine GST (GST pull-down), nous avons identifié plusieurs nouveaux interacteurs de PAR-5. Parmi ceux-ci, nous avons trouvé CAP-2 (protéine de coiffage de l'actine), qui a été identifiée dans des éxpériences de capture de 14-3-3 dans trois systèmes modèles différents. CAP-2 est un hétérodimère des protéines CAP, qui sont impliquées dans la régulation de l'actine. Nous avons trouvé que la déplétion des protéines CAP par interférence à l’ARN dans des vers de type sauvage mène à une augmentation létalité embryonnaire, ce qui suggère que ces protéines jouent un rôle important dans le développement embryonnaire. L'imagerie en temps réel d'embryons déplétés pour les protéines CAP montre qu’ils ont une diminution des contractions corticales avec un sillon de pseudoclivage mois stable, suggérant un défaut dans la régulation du cytosquelette d'actine-myosine. Ceci a également été confirmé par la diminution de la vitesse et du nombre de foci de NMY-2::GFP. En outre, ces embryons montrent une légère diminution de la taille du croissant cortical de PAR-2 lors de la phase d’établissement de la polarité. Les embryons déplétés en CAP-2 montrent également un retard dans la progression du cycle cellulaire, mais le lien entre ce phénotype et la régulation des contractions corticales reste à être précisé. La caractérisation des protéines CAP, des régulateurs du remodelage du cytosquelette, permettra d'améliorer notre compréhension des mécanismes qui sous-tendent l'établissement et le maintien de la polarité cellulaire, et donc la division cellulaire asymétrique.

A política de inclusão e o percurso de formação profissional do estudante com deficiência no Instituto Federal de Educação : um estudo de caso do Campus Planaltina

Dissertação apresentada para obtenção do grau de mestre no âmbito do Mestrado em Educação Social e Intervenção Comunitária da Escola Superior de Educação do Instituto Politécnico de Santarém.

Developmentof engineering projects supported by BIM technology: internship report

Building Information Modeling (BIM) concept is able to reshape each AEC project and the industry in general, offering a comprehensive collaboration process over a model of structure with regularly actualized and synchronized information. This report presents an overview of BIM with focus on its core concepts, applications in the project life cycle and benefits for project stakeholders through four case studies carried out during the internship in the engineering office NEWTON - Engineering Consultancy Company. The aim of the four cases studies was to cover multidisciplinary and varied projects. The first case study highlights the engineering project’s workflow and presents a comparison of traditional procedures and BIM concepts applied on the rehabilitation of an existing building. In the second and third case study, attention is focused on the goals achieved, particularly by structural engineer, due to the implementation of the mentioned technology on a full-lifecycle BIM project of a small residence and a complex project of residential building in Porto and on its architectural integration. In addition, through the fourth case study, the spatial coordination of Mechanical, Electrical and Plumbing (MEP) systems at a large-scale hotel project has been analyzed and accomplished, highlighting merits of BIM at this project stage. Through a reduction of the space used for facilities and infrastructures and the ability to identify conflicts and to nullify the related costs, its advantage for a complex building was proved.

Promoting reflective assessing practices through narratives: An action research project in early childhood

This project aims at describing the use of Action Research in the development of more structured assessment practices in Early Childhood Portuguese contexts. The teacher had always observed young learners’ activities and progress, and registered them in the form of “critical incidents”. This reflective process structured through this type of narratives helps “tune” the Class Curriculum firstly designed without much knowledge about the kids and so, difficultly responding to their specific needs and interests. The results achieved suggest kids become better prepared to face further education and life. Being early childhood assessment felt by most Portuguese kindergarten teachers as an innovative procedure, the project was seen as the launching of roots for “new” practices.

Novel efficient technologies in Europe for axle bearing condition monitoring – the MAXBE project

Axle bearing damage with possible catastrophic failures can cause severe disruptions or even dangerous derailments, potentially causing loss of human life and leading to significant costs for railway infrastructure managers and rolling stock operators. Consequently the axle bearing damage process has safety and economic implications on the exploitation of railways systems. Therefore it has been the object of intense attention by railway authorities as proved by the selection of this topic by the European Commission in calls for research proposals. The MAXBE Project (http://www.maxbeproject.eu/), an EU-funded project, appears in this context and its main goal is to develop and to demonstrate innovative and efficient technologies which can be used for the onboard and wayside condition monitoring of axle bearings. The MAXBE (interoperable monitoring, diagnosis and maintenance strategies for axle bearings) project focuses on detecting axle bearing failure modes at an early stage by combining new and existing monitoring techniques and on characterizing the axle bearing degradation process. The consortium for the MAXBE project comprises 18 partners from 8 member states, representing operators, railway administrations, axle bearing manufactures, key players in the railway community and experts in the field of monitoring, maintenance and rolling stock. The University of Porto is coordinating this research project that kicked-off in November 2012 and it is completed on October 2015. Both on-board and wayside systems are explored in the project since there is a need for defining the requirement for the onboard equipment and the range of working temperatures of the axle bearing for the wayside systems. The developed monitoring systems consider strain gauges, high frequency accelerometers, temperature sensors and acoustic emission. To get a robust technology to support the decision making of the responsible stakeholders synchronized measurements from onboard and wayside monitoring systems are integrated into a platform. Also extensive laboratory tests were performed to correlate the in situ measurements to the status of the axle bearing life. With the MAXBE project concept it will be possible: to contribute to detect at an early stage axle bearing failures; to create conditions for the operational and technical integration of axle bearing monitoring and maintenance in different European railway networks; to contribute to the standardization of the requirements for the axle bearing monitoring, diagnosis and maintenance. Demonstration of the developed condition monitoring systems was performed in Portugal in the Northern Railway Line with freight and passenger traffic with a maximum speed of 220 km/h, in Belgium in a tram line and in the UK. Still within the project, a tool for optimal maintenance scheduling and a smart diagnostic tool were developed. This paper presents a synthesis of the most relevant results attained in the project. The successful of the project and the developed solutions have positive impact on the reliability, availability, maintainability and safety of rolling stock and infrastructure with main focus on the axle bearing health.

A Arquitetura como Processo Social

Desde o decorrer dos séculos que a arquitetura se tem apresentado de diferentes formas perante o seu público. As sucessivas mudanças na mentalidade social foram em consequência provocando alterações no posicionamento do arquiteto na relação com o utilizador, resultando no distanciamento entre ambos. O processo social da arquitetura acabou por sofrer continuas alterações na sua forma de atuar, perdendo o seu caráter de serviço prestado à sociedade, e funcionando como um instrumento de afirmação e demonstração de poder. Através de uma análise da complexidade nas componentes da sociologia e da espacialidade, pretende-se chegar à essência da conceção do espaço e da forma como este organiza e estrutura a sociedade. A questão primordial encontra-se no assumir do utilizador como um elemento primordial para a modelação do espaço, expondo os efeitos da componente participativa na conceção do programa e do projeto. Na presente dissertação tenta-se perceber de que forma a participação na conceção do projeto arquitetónico, pode exponenciar o processo social da arquitetura. Através da análise de três obras internacionais, procura-se compreender de que forma o pensamento arquitetónico e a metodologia de trabalho dos seus autores representam instrumentos importantes para restabelecer a conexão perdida entre o arquiteto e o utilizador. O que se pretende não é obtenção de uma resposta Universal, mas a exposição de um caminho, e dos instrumentos que podem constituir uma importante ferramenta para a afirmação do processo social da arquitetura, dando a origem a um projeto arquitetónico que represente a visão da sua sociedade e responda às suas necessidades. Uma arquitetura estruturada pela sociedade, onde o arquiteto assume não como um criador, mas como um gestor de recursos.

The complexity in the implementation process of empowerment-based chronic kidney care: a case study

Background: This study is part of an interactive improvement intervention aimed to facilitate empowerment-based chronic kidney care using data from persons with CKD and their family members. There are many challenges to implementing empowerment-based care, and it is therefore necessary to study the implementation process. The aim of this study was to generate knowledge regarding the implementation process of an improvement intervention of empowerment for those who require chronic kidney care. Methods: A prospective single qualitative case study was chosen to follow the process of the implementation over a two year period. Twelve health care professionals were selected based on their various role(s) in the implementation of the improvement intervention. Data collection comprised of digitally recorded project group meetings, field notes of the meetings, and individual interviews before and after the improvement project. These multiple data were analyzed using qualitative latent content analysis. Results: Two facilitator themes emerged: Moving spirit and Encouragement. The healthcare professionals described a willingness to individualize care and to increase their professional development in the field of chronic kidney care. The implementation process was strongly reinforced by both the researchers working interactively with the staff, and the project group. One theme emerged as a barrier: the Limitations of the organization. Changes in the organization hindered the implementation of the intervention throughout the study period, and the lack of interplay in the organization most impeded the process. Conclusions: The findings indicated the complexity of maintaining a sustainable and lasting implementation over a period of two years. Implementing empowerment-based care was found to be facilitated by the cooperation between all involved healthcare professionals. Furthermore, long-term improvement interventions need strong encouragement from all levels of the organization to maintain engagement, even when it is initiated by the health care professionals themselves.