Entrainment of fine sediments by turbulent flows

A study was made of the means by which turbulent flows entrain sediment grains from alluvial stream beds. Entrainment was considered to include both the initiation of sediment motion and the suspension of grains by the flow. Observations of grain motion induced by turbulent flows led to the formulation of an entrainment hypothesis. It was based on the concept of turbulent eddies disrupting the viscous sublayer and impinging directly onto the grain surface. It is suggested that entrainment results from the interaction between fluid elements within an eddy and the sediment grains.

A pulsating jet was used to simulate the flow conditions in a turbulent boundary layer. Evidence is presented to establish the validity of this representation. Experiments were made to determine the dependence of jet strength, defined below, upon sediment and fluid properties. For a given sediment and fluid, and fixed jet geometry there were two critical values of jet strength: one at which grains started to roll across the bed, and one at which grains were projected up from the bed. The jet strength K, is a function of the pulse frequency, ω, and the pulse amplitude, A, defined by

K = Aω^-s

Where s is the slope of a plot of log A against log ω. Pulse amplitude is equal to the volume of fluid ejected at each pulse divided by the cross sectional area of the jet tube.

Dimensional analysis was used to determine the parameters by which the data from the experiments could be correlated. Based on this, a method was devised for computing the pulse amplitude and frequency necessary either to move or project grains from the bed for any specified fluid and sediment combination.

Experiments made in a laboratory flume with a turbulent flow over a sediment bed are described. Dye injection was used to show the presence, in a turbulent boundary layer, of two important aspects of the pulsating jet model and the impinging eddy hypothesis. These were the intermittent nature of the sublayer and the presence of velocities with vertical components adjacent to the sediment bed.

A discussion of flow conditions, and the resultant grain motion, that occurred over sediment beds of different form is given. The observed effects of the sediment and fluid interaction are explained, in each case, in terms of the entrainment hypothesis.

The study does not suggest that the proposed entrainment mechanism is the only one by which grains can be entrained. However, in the writer’s opinion, the evidence presented strongly suggests that the impingement of turbulent eddies onto a sediment bed plays a dominant role in the process.

A generalized Hausdorff dimension for functions and sets

Let E be a compact subset of the n-dimensional unit cube, 1_n, and let C be a collection of convex bodies, all of positive n-dimensional Lebesgue measure, such that C contains bodies with arbitrarily small measure. The dimension of E with respect to the covering class C is defined to be the number

d_C(E) = sup(β:H_{β, C}(E) > 0),

where H_{β, C} is the outer measure

inf(Ʃm(C_i)^β:UC_i Ↄ E, C_i ϵ C) .

Only the one and two-dimensional cases are studied. Moreover, the covering classes considered are those consisting of intervals and rectangles, parallel to the coordinate axes, and those closed under translations. A covering class is identified with a set of points in the left-open portion, 1’_n, of 1_n, whose closure intersects 1_n - 1’_n. For n = 2, the outer measure H_{β, C} is adopted in place of the usual:

Inf(Ʃ(diam. (C_i))^β: UC_i Ↄ E, C_i ϵ C),

for the purpose of studying the influence of the shape of the covering sets on the dimension d_C(E).

If E is a closed set in 1₁, let M(E) be the class of all non-decreasing functions μ(x), supported on E with μ(x) = 0, x ≤ 0 and μ(x) = 1, x ≥ 1. Define for each μ ϵ M(E),

d_C(μ) = lim/c → inf/0 log ∆μ(c)/log c , (c ϵ C)

where ∆μ(c) = v/x (μ(x+c) – μ(x)). It is shown that

d_C(E) = sup (d_C(μ):μ ϵ M(E)).

This notion of dimension is extended to a certain class Ӻ of sub-additive functions, and the problem of studying the behavior of d_C(E) as a function of the covering class C is reduced to the study of d_C(f) where f ϵ Ӻ. Specifically, the set of points in 1₁,

(*) {d_B(F), d_C(f)): f ϵ Ӻ}

is characterized by a comparison of the relative positions of the points of B and C. A region of the form (*) is always closed and doubly-starred with respect to the points (0, 0) and (1, 1). Conversely, given any closed region in 1₂, doubly-starred with respect to (0, 0) and (1, 1), there are covering classes B and C such that (*) is exactly that region. All of the results are shown to apply to the dimension of closed sets E. Similar results can be obtained when a finite number of covering classes are considered.

In two dimensions, the notion of dimension is extended to the class M, of functions f(x, y), non-decreasing in x and y, supported on 1₂ with f(x, y) = 0 for x · y = 0 and f(1, 1) = 1, by the formula

d_C(f) = lim/s · t → inf/0 log ∆f(s, t)/log s · t , (s, t) ϵ C

where

∆f(s, t) = V/x, y (f(x+s, y+t) – f(x+s, y) – f(x, y+t) + f(x, t)).

A characterization of the equivalence d_C1(f) = d_C2(f) for all f ϵ M, is given by comparison of the gaps in the sets of products s · t and quotients s/t, (s, t) ϵ C_i (I = 1, 2).

Solubility and Diffusivity of Water in Lunar Basalt, and Chemical Zonation in Olivine-Hosted Melt Inclusions

I report the solubility and diffusivity of water in lunar basalt and an iron-free basaltic analogue at 1 atm and 1350 °C. Such parameters are critical for understanding the degassing histories of lunar pyroclastic glasses. Solubility experiments have been conducted over a range of fO₂ conditions from three log units below to five log units above the iron-wüstite buffer (IW) and over a range of pH₂/pH₂O from 0.03 to 24. Quenched experimental glasses were analyzed by Fourier transform infrared spectroscopy (FTIR) and secondary ionization mass spectrometry (SIMS) and were found to contain up to ~420 ppm water. Results demonstrate that, under the conditions of our experiments: (1) hydroxyl is the only H-bearing species detected by FTIR; (2) the solubility of water is proportional to the square root of pH₂O in the furnace atmosphere and is independent of fO₂ and pH₂/pH₂O; (3) the solubility of water is very similar in both melt compositions; (4) the concentration of H₂ in our iron-free experiments is <3 ppm, even at oxygen fugacities as low as IW-2.3 and pH₂/pH₂O as high as 24; and (5) SIMS analyses of water in iron-rich glasses equilibrated under variable fO₂ conditions can be strongly influenced by matrix effects, even when the concentrations of water in the glasses are low. Our results can be used to constrain the entrapment pressure of the lunar melt inclusions of Hauri et al. (2011).

Diffusion experiments were conducted over a range of fO₂ conditions from IW-2.2 to IW+6.7 and over a range of pH₂/pH₂O from nominally zero to ~10. The water concentrations measured in our quenched experimental glasses by SIMS and FTIR vary from a few ppm to ~430 ppm. Water concentration gradients are well described by models in which the diffusivity of water (D^*_water) is assumed to be constant. The relationship between D^*_water and water concentration is well described by a modified speciation model (Ni et al. 2012) in which both molecular water and hydroxyl are allowed to diffuse. The success of this modified speciation model for describing our results suggests that we have resolved the diffusivity of hydroxyl in basaltic melt for the first time. Best-fit values of D^*_water for our experiments on lunar basalt vary within a factor of ~2 over a range of pH₂/pH₂O from 0.007 to 9.7, a range of fO₂ from IW-2.2 to IW+4.9, and a water concentration range from ~80 ppm to ~280 ppm. The relative insensitivity of our best-fit values of D^*_water to variations in pH₂ suggests that H₂ diffusion was not significant during degassing of the lunar glasses of Saal et al. (2008). D^*_water during dehydration and hydration in H₂/CO₂ gas mixtures are approximately the same, which supports an equilibrium boundary condition for these experiments. However, dehydration experiments into CO₂ and CO/CO₂ gas mixtures leave some scope for the importance of kinetics during dehydration into H-free environments. The value of D^*_water chosen by Saal et al. (2008) for modeling the diffusive degassing of the lunar volcanic glasses is within a factor of three of our measured value in our lunar basaltic melt at 1350 °C.

In Chapter 4 of this thesis, I document significant zonation in major, minor, trace, and volatile elements in naturally glassy olivine-hosted melt inclusions from the Siqueiros Fracture Zone and the Galapagos Islands. Components with a higher concentration in the host olivine than in the melt (MgO, FeO, Cr₂O₃, and MnO) are depleted at the edges of the zoned melt inclusions relative to their centers, whereas except for CaO, H₂O, and F, components with a lower concentration in the host olivine than in the melt (Al₂O₃, SiO₂, Na₂O, K₂O, TiO₂, S, and Cl) are enriched near the melt inclusion edges. This zonation is due to formation of an olivine-depleted boundary layer in the adjacent melt in response to cooling and crystallization of olivine on the walls of the melt inclusions concurrent with diffusive propagation of the boundary layer toward the inclusion center.

Concentration profiles of some components in the melt inclusions exhibit multicomponent diffusion effects such as uphill diffusion (CaO, FeO) or slowing of the diffusion of typically rapidly diffusing components (Na₂O, K₂O) by coupling to slow diffusing components such as SiO₂ and Al₂O₃. Concentrations of H2O and F decrease towards the edges of some of the Siqueiros melt inclusions, suggesting either that these components have been lost from the inclusions into the host olivine late in their cooling histories and/or that these components are exhibiting multicomponent diffusion effects.

A model has been developed of the time-dependent evolution of MgO concentration profiles in melt inclusions due to simultaneous depletion of MgO at the inclusion walls due to olivine growth and diffusion of MgO in the melt inclusions in response to this depletion. Observed concentration profiles were fit to this model to constrain their thermal histories. Cooling rates determined by a single-stage linear cooling model are 150–13,000 °C hr^-1 from the liquidus down to ~1000 °C, consistent with previously determined cooling rates for basaltic glasses; compositional trends with melt inclusion size observed in the Siqueiros melt inclusions are described well by this simple single-stage linear cooling model. Despite the overall success of the modeling of MgO concentration profiles using a single-stage cooling history, MgO concentration profiles in some melt inclusions are better fit by a two-stage cooling history with a slower-cooling first stage followed by a faster-cooling second stage; the inferred total duration of cooling from the liquidus down to ~1000 °C is 40 s to just over one hour.

Based on our observations and models, compositions of zoned melt inclusions (even if measured at the centers of the inclusions) will typically have been diffusively fractionated relative to the initially trapped melt; for such inclusions, the initial composition cannot be simply reconstructed based on olivine-addition calculations, so caution should be exercised in application of such reconstructions to correct for post-entrapment crystallization of olivine on inclusion walls. Off-center analyses of a melt inclusion can also give results significantly fractionated relative to simple olivine crystallization.

All melt inclusions from the Siqueiros and Galapagos sample suites exhibit zoning profiles, and this feature may be nearly universal in glassy, olivine-hosted inclusions. If so, zoning profiles in melt inclusions could be widely useful to constrain late-stage syneruptive processes and as natural diffusion experiments.

Bicyclo[3.2.0]hepta-1,4,6-triene: synthesis, thermal rearrangement, and anion formation

In order to determine the properties of the bicycloheptatrienyl anion (Ia) (predicted to be conjugatively stabilized by Hückel Molecular Orbital Theory) the neutral precursor, bicyclo[3. 2. 0] hepta-1, 4, 6-triene (I) was prepared by the following route.

Reaction of I with potassium-t-butoxide, potassium, or lithium dicyclohexylamide gave anion Ia in very low yield. Reprotonation of I was found to occur solely at the 1 or 5 position to give triene II, isolated as to its dimers.

A study of the acidity of I and of other conjugated hydrocarbons by means of ion cyclotron resonance spectroscopy resulted in determination of the following order of relative acidities:

H₂S ˃ C₅H₆ ˃ CH₃NO₂ ˃ 1, 4- C₅H₈ ˃ I ˃ C₂H₅OH ˃ H₂O; cyclo-C₇H₈ ˃ C₂ H₅OH; фCH₃ ˃ CH₃OH

In addition, limits for the proton affinities of the conjugate bases were determined:

350 kcal/mole ˂ PA(C₅ H₅^-) ˂ 360 kcal/mole

362 kcal/mole ˂ PA(C₅H₇^-, Ia, cyclo-C₇H₇^-) ˂ 377 kcal/mole PA(фCH₂^-) ˂ 385 kcal/mole

Gas phase kinetics of the trans-XVIII to I transformation gave the following activation parameters: E_a = 43.0 kcal/mole, log A = 15.53 and ∆S^ǂ (220°) = 9.6 cu. The results were interpreted as indicating initial 1,2 bond cleavage to give the 1,3-diradical which closed to I. Similar studies on cis-XVIII gave results consistent with a surface component to the reaction (E_a = 22.7 kcal/mole; log A = 9.23, ∆S^ǂ (119°) = -18.9 eu).

The low pressure (0.01 to 1 torr) pyrolysis of trans-XVIII gave in addition to I, fulvenallene (LV), ethynylcyclopentadiene (LVI) and heptafulvalene (LVII). The relative ratios of the C₇H₆ isomers were found to be dependent upon temperature and pressure, higher relative pressure and lower temperatures favoring formation of I. The results were found to be consistent with the intermediacy of vibrationally excited I and subsequent reaction to give LV and LVI.

Impact of polarized illumination on high NA imaging in ArF immersion lithography at 45 nm node

Immersion lithography has been considered as the mainstream technology to extend the feasibility of optical lithography to further technology nodes. Using proper polarized illumination in an immersion lithographic tool is a powerful means to enhance the image quality and process capability for high numerical aperture (NA) imaging. In this paper, the impact of polarized illumination on high NA imaging in ArF immersion lithography for 45 nm dense lines and semi-dense lines is studied by PROLITH simulation. The normalized image log slope (NILS) and exposure defocus (ED) window are simulated under various polarized illumination modes, and the impact of polarized illumination on image quality and process latitude is analyzed. (C) 2007 Elsevier GmbH. All rights reserved.

A demanda por moeda no Brasil no período 1974-2008: estimativas sob expectativas adaptativas e racionais

O objetivo principal desta dissertação é analisar a demanda por moeda no Brasil no período 1974 a 2008, lembrando que ele inclui sub-períodos de inflação elevada, e baixa, e levando em conta hipóteses alternativas quanto à formação de expectativas. A especificação adotada é a de Tourinho (1995), que generaliza a de Cagan (1956) para permitir uma forma funcional mais flexível e incorporar outras variáveis, além da inflação esperada, como variáveis explicativas. Verifica-se que estas extensões são importantes para modelar a demanda por saldos monetários reais no período aqui considerado. A forma funcional semi-log de Cagan é rejeitada, em favor de uma forma funcional flexível Box-Cox, e os coeficientes da taxa de juros real e da variância da inflação são significativos, mostrando a importância destas variáveis serem inseridas ao modelo. A função estimada para o período completo é comparada com aquelas estimadas para os sub-periodos de inflação alta e moderada, para verificar a estabilidade da formulação adotada. Conclui-se que se pode rejeitar a hipótese de que ela é estável. O modelo de Cagan é generalizado aqui em outra dimensão, considerando mecanismos alternativos de formação de expectativas, que podem ser adaptativas, como no modelo original, ou racionais. A hipótese de que expectativas adaptativas sejam racionais é também considerada. Conclui-se que a imposição da condição de racionalidade ao modelo com expectativas adaptativas não produz alterações importantes nos valores estimados.

Eventos de vida produtores de estresse e acidentes de trabalho: Estudo Pró-Saúde, Rio de Janeiro - Brasil

A proposta desta tese consiste em um recorte de uma abordagem mais ampla da determinação dos acidentes de trabalho, e tem como objetivo geral investigar o perfil de acidentes de trabalho que acometem funcionários técnico-administrativos do quadro efetivo de uma universidade do Rio de Janeiro. Para o alcance do objetivo, esta tese está estruturada em dois artigos, e como tal pretende explorar o perfil sócio-demográfico e ocupacional de funcionários públicos na ocorrência de acidentes de trabalho (Artigo 1); e investigar a associação entre os eventos de vida produtores de estresse (EVPE) e a ocorrência de acidentes de trabalho (Artigo 2). Dados seccionais da fase 2 de um estudo de natureza prospectiva (Estudo Pró-Saúde) foram coletados entre 3572 funcionários. A história de acidentes de trabalho foi captada por meio de perguntas dicotômicas (sim vs. não) para cada um dos seguintes tipos de acidentes: perfuração com agulha; perfuração com outro objeto; corte; queimadura; choque elétrico; contusão ou distensão muscular; fratura, entorse ou luxação; e envenenamento ou intoxicação. O período de referência para aferição tanto dos EVPE quanto da ocorrência de acidente de trabalho correspondeu aos 12 meses anteriores a aplicação de questionário autopreenchível. No artigo 1 utilizou-se a técnica de análise de correspondência múltipla para delimitar agrupamentos de funcionários quanto ao perfil sócio-demográfico e ocupacional associado à ocorrência de acidente de trabalho, de acordo com as seguintes Característica : sexo, idade, escolaridade, renda per capita, ocupação, setor e local de trabalho. No artigo 2, a associação entre EVPE e acidentes de trabalho foi avaliada através de análise multivariada por meio de modelo lineares generalizados (logpoisson), sendo os resultados expressos através de razões de prevalência (RP) ajustadas e seus respectivos intervalos de 95% de confiança (IC95%). A prevalência total de acidentes no período de 12 meses foi de 25,6%. Dos tipos de acidentes referidos, o mais frequente foi a contusão ou fratura, com cerca de (10,2%) de relatos. Em seguida, aparecem as perfurações com agulha (6,5%). Os resultados da análise de correspondência revelam três grupos, destacando-se aquele formado pelos que sofreram perfuração com agulha com um perfil que abrange os auxiliares de enfermagem, trabalham no Hospital Universitário e setores adjacentes, especificamente em setores de terapia intensiva, emergência, cirurgia geral, clinica geral e ambulatório. Em relação à associação com EVPE, ter sido testemunha de agressão foi o evento mais fortemente associado com acidentes de trabalho (RP= 1,98, IC95%= 1,67; 2,34). Este estudo trouxe informações acerca da importância das características sócio-demográficas e de aspectos psicossociais na ocorrência dos acidentes de trabalho que podem ser úteis na elaboração de medidas para a prevenção desse importante problema de saúde pública.

Frame-level features conveying phonetic information for language and speaker recognition

150 p.

Sistema de control y supervisión para una instalación industrial basado en técnicas de computación en la nube.

[ES]Hasta ahora, el control y monitorización de una instalación industrial se realiza desde la sala de control situada en las propias instalaciones de la planta. Cada unidad de control guarda y envía los datos a un ordenador que después se envían a uno central, siguiendo un orden jerárquico, en el que se visualizan ante un operario. Hoy en día, sin embargo, con el auge de los dispositivos móviles inteligentes, se puede conseguir que esa supervisión de la planta industrial se pueda hacer desde cualquier lugar. Podemos visualizar esos datos de control en nuestra mano y mandar órdenes a cada unidad desde nuestro teléfono inteligente. Esto es lo que se ha conseguido hacer con este proyecto, en el que se ha modelizado una instalación industrial basada en una cadena de montaje con tres unidades.

Upconversion emission in Er3+ doped novel bismuthate glass

Novel Er3+-doped bismuth lead strontiam glass was fabricated and characterized, and the absorption spectrum and upconversion spectrum of the glass were studied. The Judd-Ofelt intensity parameters Omega(t)(t = 2, 4, 6) were found to be Omega(2) = 3.27 x 10(-20) cm(2), Omega(4) = 1.15 x 10(-20) cm(2), and Omega(6) = 0.38 x 10(-20) cm(2). The oscillator strength, the spontaneous transition probabilities, the fluorescence branching ratios, and excited state lifetimes were also measured and calculated. The upconversion emission intensity varies with the power of infrared excitation intensity. A plot of log I-up vs log I-IR yields a straight line with slope 1.86, 1.88 and 1.85, corresponding to 525, 546, and 657 nm emission bands, respectively, which indicates that a two-photon process for the red and green emission.

Two-photon excited red upconversion luminescence of thulium ions doped GeS2-In2S3-CsI glass

We report a novel phenomenon in GeS2-In2S3-CsI chalcohalide glass doped with Tm3+ ions. Under irradiation with an 808 nm laser diode, a bright red emission centered at 700 nm is observed for the first time in this glass. The log-log correlation between integrated emission intensity and pump power reveals that a two-photon absorption process is involved in the phenomenon, suggesting that the F-3(3,2) -> H-3(6) transition of Tm3+ ions is responsible for the appearance of the red emission. The results indicate that the indium (In) based chalcohalide glass containing Tm3+ ions is expected to find applications in visible lasers, high density optical storage and three-dimensional color displays. (C) 2009 Elsevier B.V. All rights reserved.

Rapid quantitative detection of Yersinia pestis by lateral-flow immunoassay and up-converting phosphor technology-based biosensor

Up-converting phosphor technology (UPT)-based lateral-flow immunoassay has been developed for quantitative detection of Yersinia pestis rapidly and specifically. In this assay, 400 nm up-converting phosphor particles were used as the reporter. A sandwich immumoassay was employed by using a polyclonal antibody against F1 antigen of Y. pestis immobilized on the nitrocellulose membrane and the same antibody conjugated to the UPT particles. The signal detection of the strips was performed by the UPT-based biosensor that could provide a 980 nm IR laser to excite the phosphor particles, then collect the visible luminescence emitted by the UPT particles and finally convert it to the voltage as a signal. V-T and V-c stand for the multiplied voltage units for the test and the control line, respectively, and the ratio V-T/V-C is directly proportional to the number of Y pestis in a sample. We observed a good linearity between the ratio and log CFU/ml of Y pestis above the detection limit, which was approximately 10(4) CFU/mI. The precision of the intra- and inter-assay was below 15% (coefficient of variation, CV). Cross-reactivity with related Gram-negative enteric bacteria was not found. The UPT-LF immunoassay system presented here takes less than 30 min to perform from the sample treatment to the data analysis. The current paper includes only preliminary data concerning the biomedical aspects of the assay, but is more concentrated on the technical details of establishing a rapid manual assay using a state-of-the-art label chemistry. (c) 2006 Elsevier B.V. All rights reserved.

Estimation of the growth curve parameters in Macrobrachium rosenbergii

Growth is one of the most important characteristics of cultured species. The objective of this study was to determine the fitness of linear, log linear, polynomial, exponential and Logistic functions to the growth curves of Macrobrachium rosenbergii obtained by using weekly records of live weight, total length, head length, claw length, and last segment length from 20 to 192 days of age. The models were evaluated according to the coefficient of determination (R2), and error sum off square (ESS) and helps in formulating breeders in selective breeding programs. Twenty full-sib families consisting 400 PLs each were stocked in 20 different hapas and reared till 8 weeks after which a total of 1200 animals were transferred to earthen ponds and reared up to 192 days. The R2 values of the models ranged from 56 – 96 in case of overall body weight with logistic model being the highest. The R2 value for total length ranged from 62 to 90 with logistic model being the highest. In case of head length, the R2 value ranged between 55 and 95 with logistic model being the highest. The R2 value for claw length ranged from 44 to 94 with logistic model being the highest. For last segment length, R2 value ranged from 55 – 80 with polynomial model being the highest. However, the log linear model registered low ESS value followed by linear model for overall body weight while exponential model showed low ESS value followed by log linear model in case of head length. For total length the low ESS value was given by log linear model followed by logistic model and for claw length exponential model showed low ESS value followed by log linear model. In case of last segment length, linear model showed lowest ESS value followed by log linear model. Since, the model that shows highest R2 value with low ESS value is generally considered as the best fit model. Among the five models tested, logistic model, log linear model and linear models were found to be the best models for overall body weight, total length and head length respectively. For claw length and last segment length, log linear model was found to be the best model. These models can be used to predict growth rates in M. rosenbergii. However, further studies need to be conducted with more growth traits taken into consideration

Casamento e estratificação social : um estudo sobre seletividade marital por escolaridade e origem social no Brasil

Buscou-se, nesse estudo, quantificar e avaliar a homogamia, a heterogamia e as barreiras de cruzamento ao matrimônio via escolaridade (anos de estudo) e origem social (categorias ocupacionais dos pais). As tendências temporais desses padrões também foram examinadas. Analisou-se, ainda, a associação entre escolaridade dos maridos, escolaridade das esposas (status realizado), origem social dos maridos e origem social das esposas (status atribuído). Esse trabalho teve o intuito também de discutir o viés de seletividade marital segundo os diferenciais sociais (anos de estudo e origem social). Para isso, foram analisados parâmetros que mostram como se configuram os padrões de nupcialidade (idade média ao casar e celibato definitivo), bem como foram examinados os determinantes da união sob a perspectiva de três níveis de fatores condicionantes (nível das características individuais, nível do status atribuído e nível do status realizado). Verificou-se que as mulheres com alta escolaridade, no Brasil, permanecem num período maior na condição de solteiras (alta idade média ao casar e alto celibato definitivo). Os homens com alta escolaridade também apresentaram uma alta idade média ao casar, entretanto, o casamento demonstrou ser praticamente universal para esse segmento. Os resultados também mostraram que o aumento de um ano na idade dos indivíduos elevam a chance de união em aproximadamente 5%. Ter uma baixa escolaridade também aumenta a chance dos indivíduos se casarem. A variável origem social apresentou um comportamento dúbio ao ser incorporada no modelo com a variável anos de estudo. Constatou-se que há uma alta proporção de uniões homogâmicas por escolaridade. Para efetuar uma análise adequada das tendências temporais na seletividade marital foi proposto modelos log-lineares em que a dimensão do tempo foi incorporada. O ajustamento dos modelos indicou que a interpretação mais plausível para as tendências temporais na seletividade marital por escolaridade é a da estabilidade dos parâmetros indicativos das propensões homogâmicas. Em relação a análise da seletividade marital e origem social os resultados mostraram que a maior proporção de homogamia pôde ser verificada entre os casais que tinham como origem social a categoria de pequenos proprietários rurais. A conclusão mais plausível ao se analisar os modelos que consideraram as tendências temporais é que a variação temporal dos parâmetros indicativos da seletividade marital por origem social é a característica mais forte dos dados analisados. Ao analisar as chances relativas oriundas desse modelo observou-se que as barreiras de origem social de curta distância (entre segmentos de origem social próximos) são as mais fáceis de serem transpostas. Ao passo que as barreiras mais difíceis de serem ultrapassadas estão concentradas nos dois extremos. Verificou-se, ainda, que as associações entre as interações escolaridade do marido e escolaridade da esposa e origem social do marido e origem social da esposa não são independentes. Assim, pode-se presumir que a origem social (status atribuído) continua influenciando a escolha conjugal mesmo quando se leva em consideração o status realizado (escolaridade dos cônjuges)

Summary document of the work being done in 1992-1993 regarding the migratory salmonid fisheries of the River Ribble catchment

This document lists the work on salmonid fisheries in the River Ribble catchment in the north west of England which was done in 1992-93. The document includes the following: analysis of historical catch data from the River Ribble covering 1937-1991; Ribble and Hodder stock assessment surveys 1992-93 including Swanside Beck; Ribble catch data from game angling log books 1993; results of salmon scale sampling 1993; results of microtagging programme in Hodder and Ribble 1993; Waddow Weir dish counter data 1993; Winkley Hall (Hodder), Locks Weir and Waddow Hall (Ribble) fish counter data 1993; number of fish and ova from Witcherwell Hatchery 1993.